Servername_ID 30620 Warning_Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.

Hi everybody.
I have this problem on a Windows Server 2012 Datacenter, offering SCOM2012 and VMM2012 SP1  services.
If I try to access to \\servername\c$ , or vmm agent on a server try to access it, in the "Server Manager , File and Storage Services, Servers" console I can see the message, every minutes:
servername ID 30620 Warning
Microsoft-Windows-SMBClient Microsoft-Windows-SMBClient/Operational - Connection to server \servername IP Address x.x.x.x:445 was aborted.
I alreday apply the registry update:
LocalAccountTokenFilterPolicy QWORD = 1
UAC and firewall on the server are disabled.
Anyone have some suggestion for me ?
Thanks.
Gabriel

Two HP DL Servers - a DL380 G5 and a DL 360 G5 - running Server 2012 Standard with Hyper-V.  Both servers have HP NC373i onboard Gigabit NICs.
NIC 1 is for Management OS, NIC 2 is dedicated to Hyper-V.  The latest/greatest HP Management software, drivers, firmware for Server 2012 are installed on both servers.
Could copy files to/from other servers with no problem, and near gigabit speed.  All other networking appeared normal.
Could not copy files to each other. Could ping each other though.
Ran the above command and rebooted both servers - issue has gone away.
I've got a few more of these older HP servers that I'm going to test with Server 2012.

Similar Messages

  • When I pressed Apply button after autoupdate, i get window reading as connecting to server and it goes on for hours together and no end and no further message.

    I proceeded to update automatically and the I got the window to apply. I clicked the "Apply" button. The browser closed and reopened immediately, and my antivirus asked me whether to allow the software. I clicked allowed. Then I got the window reading as "Connecting to server etc.". I was waiting for further development. But this window keeps on showing same message without any progress even after I kept the same opened for nearly1 hour.

    If you have problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Do not remove personal data if you uninstall the current version.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

  • Mac and windows clients losing connection to Server 2012 Namespace

    I am running Windows 2012 Standard edition on two HP Servers. Both are fully patched O/S's and all HP system updates are installed. Each is running a 10 Gbit NIC to a Cisco 2960 Switch fully updated. Both Network shares are on HP external Drive bays connected
    through a Smart Array P822 card
    All users connect to the primary server (secondary server configured not to take referrals at this time)
    My Mac clients running OS X 10.9.1 connect using smb and the namespace. When the designers come in they usually have to reboot in order to connect to their server shares. We discovered today that if they change the IP address the reboot is not needed. We
    have an archive server running on a Synology NAS. Their connection to the Synology is not impacted.
    The windows machines will lose connection at random and not everyone at once. Usually no more than twice in a week. The fix is either a reboot or an IP change, sometimes both. None of the machines go to sleep or hibernate. All machines are fully patched
    with windows updates, and HP system updates.
    We run Avast on both the Mac's and PC's if this makes a difference.
    Any thoughts?
    thanks

    thanks Shaon,,
    1) IP address before is within our DHCP scope of 192..168.0.51/200. When we set to static we set it to 192.168.0.16/20. We then reset back to DHCP.
    2) The error message is that it can not find the server if I try to map it.
    3) Clients can still access by IP address and FQDN
    We have disabled Avast on a few machines to see if it will make a difference. We then ran into the issue on a machine without Avast installed.
    We did notice that our DNS server was not deleting old entries and we found many duplicate entries. We set it to scavenge and then I went through and deleted old records. Not sure if this would cause a problem or not.
    thanks again for your help!

  • Windows 2008 R2 connection broker

    I have a problem related to the fact that remote desktop client are not redirected to the disconnected sessionr when they try to reconnect.
    I'm using a netscaler load balancer that uses redirection toker with the connection broker server.
    I have made a small configuration test environment that reflect my origina configuration and the problem will exist event there.
    All the servers are windows 2008 R2 with sp1 and all latest fix available using microsoft update.
    The connection broker server is a domain controller server, and the terminal server are computer member of the domain.All the information are correctl registered by the connection broker database, but is seems that it works only with administative users.
    The error that is reported
    RD Connection Broker failed to process the connection request for user DOMAIN\USER.
    Load Balancing failed OR Specified endpoint could not be found.HRESULT = 0x80070515.  
    I have found no information about the error
    0x80070515.
    Here follow the connection broker information after
    ClusterName = MYCLUSTER
    NumberOfServers = 4
    SingleSessionMode = 1
        SERVER :
        ServerName = TS018.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.18
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        No sessions on server TS018.mydomain.local
        SERVER :
        ServerName = TS020.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.20
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        NumberOfSessions = 1
            SESSION :
            UserName= mydomain\administrator    ApplicationType=     SessionState= 0
            CreateTime= 20150303101848.856647+060    DisconnectTime=
            ServerName= TS020.mydomain.local
            SessionID= 1
            ServerIP= 10.10.4.20
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
        SERVER :
        ServerName = TS019.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.19
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        NumberOfSessions = 2
            SESSION :
            UserName= mydomain\administrator    ApplicationType=     SessionState= 1
            CreateTime= 20150303101224.366219+060    DisconnectTime= 16010101000000.000000-000
            ServerName= TS019.mydomain.local
            SessionID= 1
            ServerIP= 10.10.4.19
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
            SESSION :
            UserName= mydomain\Flavio    ApplicationType= D:\Programmi\Seac\SeacCruscotto.exe    SessionState= 0
            CreateTime= 20150303121903.740379+060    DisconnectTime=
            ServerName= TS019.mydomain.local
            SessionID= 2
            ServerIP= 10.10.4.19
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
        SERVER :
        ServerName = TS017.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.17
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        No sessions on server TS017.mydomain.local
    Second dump with the disconnected user and the same user that ties to reconnect and was redirected to a new session  instead to the disconnected session. You will find two user Flavio one in disconnected state (1) and one in connected state(0)
    ClusterName = MYCLUSTER
    NumberOfServers = 4
    SingleSessionMode = 1
        SERVER :
        ServerName = TS018.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.18
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        No sessions on server TS018.mydomain.local
        SERVER :
        ServerName = TS020.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.20
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        NumberOfSessions = 1
            SESSION :
            UserName= mydomain\administrator    ApplicationType=     SessionState= 0
            CreateTime= 20150303101848.856647+060    DisconnectTime=
            ServerName= TS020.mydomain.local
            SessionID= 1
            ServerIP= 10.10.4.20
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
        SERVER :
        ServerName = TS019.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.19
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        NumberOfSessions = 2
           SESSION :
            UserName= mydomain\administrator    ApplicationType=     SessionState= 1
            CreateTime= 20150303101224.366219+060    DisconnectTime= 16010101000000.000000-000
            ServerName= TS019.mydomain.local
            SessionID= 1
            ServerIP= 10.10.4.19
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
            SESSION :
            UserName= mydomain\Flavio    ApplicationType= D:\Programmi\Seac\SeacCruscotto.exe    SessionState= 1
            CreateTime= 20150303121903.740379+060    DisconnectTime= 16010101000000.000000-000
            ServerName= TS019.mydomain.local
            SessionID= 2
            ServerIP= 10.10.4.19
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
        SERVER :
        ServerName = TS017.mydomain.local ServerSingleSessionMode = 1 LoadIndicator = 655350000
        ServerIP = 10.10.4.17
        ServerWeight = 0
        ClusterName = MYCLUSTER
        NumPendRedir = 0
        NumberOfSessions = 1
            SESSION :
            UserName= mydomain\Flavio    ApplicationType= D:\Programmi\Seac\SeacCruscotto.exe    SessionState= 0
            CreateTime= 20150303122059.706850+060    DisconnectTime=
            ServerName= TS017.mydomain.local
            SessionID= 2
            ServerIP= 10.10.4.17
            TSProtocol= 2
            ResolutionWidth= 1920
            ResolutionHeight= 1080
            ColorDepth= 4
    Any idea ?
    Thanks
    Flavio

    Hi Flavio,
    It seems that you are facing issue with the RDCB load balancing between servers. Might possible that there is some wrong configuration happens which cause this issue. Still I like you to recheck all the configuration for your environment. Also as you said it
    works with admin users, have you provide access to user to connect to the server?
    From the error description it appears to be error 802 with specific code. To troubleshoot this issue, you can apply below steps and try.
    1. Please try to limit single RDS session for TS user. 
    2. Install RDS broker to separate server
    3. Run NLB diagnose to check if any issue related to NLB
    4. Use IP address redirection instead of token redirection
    Also try to apply this policy settings.
    Computer Configuration / Administrative Templates / Windows Components / Remote Desktop Services / Remote Desktop Session Host / RD Connection Broker / 
    Use RD Connection Broker load balancing: Enabled
    Configure RD Connection Broker server name: Enabled
    And then apply gpupdate /force on every server and check the result.
    Here is the article for related error only for reference.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Internet signal but no Windows XP internet connection

    I have a MacPro partitioned using BootCamp and can access the internet using the Mac OS side but when I open to the Windows XP partition, I have an "excellent" signal denoted in the lower right hand corner but can not get a connection to the internet using Explorer. I can use a ethernet cable attached to my Mac and access the internet while in Windows
    I went to the microsoft website to apply the hot fixes offered without resolve to the problem.
    My question is this: What is wrong? Is the configuration used on the OS Partition for AirPort different for Windows? Could it be the channel being used. I am very overwhelmed by all the different lettering being used to denote this or that and though I have been trying to work on this for over a week, I can not find a forum that addresses this. My router is a Linksys and the main PC and my Mac are working fine but it is the Windows thing. Can anyone suggest, being as specific as possible as to how to fix this.
    Any help would be very much appreciated!

    I just spent 2 hours trying to get a windows Xp to connect to a airport extreme. When I first started, I needed the hex key to connect the windows machine; I got the key and it connected fine. When I start the airport admin utility, it told me it the version installed was not compatable with the base station, but every thing worked. I decided that I better update the admin utility, so I installed what came with the base station. When I started the new version of the the utility,it found a update for the base station. So, I let it update the firmware. I don't know if the windows would have connected because I did not test it. Once the firmware was updated, the windows machine connects but does not aquire a IP address. I am using WEP and the wep key works just fine with the MacBook.
    It seems like this is the same problem others are describing, but also seems to be linked to either the firmware update or the admin utililty. Has everyone witht problems updated the firmware in the base station?

  • Home network - How can I get Tiger & Windows 2000 to connect?

    This has been an ongoing annoyance for some time now.
    I cannot get my G4 iMac running the latest updated Tiger to connect to a PC running Win2K (home network) through a basic router and junction box.
    Both are connected to the internet (DSL) via a router, then one of those "splitter" or junction boxes (what's the right term for this thing?) -- the connection goes from the DSL outlet on the wall, to the router, then into this junction box, which then connects the iMac and the PC to the net.
    No problems with the net connection for both machines.
    Way back when I first had a different PC connected to this configuration, I COULD see the PC from the iMac, and vice versa. File sharing worked seamlessly.
    Then one day, for no good reason, the Mac could no longer "see" the PC ... but the PC could see the iMac. So I resigned myself to swapping files to and from the PC.
    Just recently, I changed internet providers for my DSL, resulting in an entirely new IP address setup for each machine. Both machines now get the net. But now NEITHER machine can see the other.
    From the Mac, I have tried:
    Clicking on the Network icon in the Finder
    Typing various different things into the window that results when I click "GO" then "Connect To Server" -- the IP address of PC, the name of the PC, etc.
    Ensuring "Windows file sharing" is engaged in the "Sharing" window of the System Preferences
    Ensuring "Appleshare" is on
    Ensuring the firewall allows traffic with windows file sharing
    From the PC I have tried:
    Ensuring the main drive is shared
    Installed every network sharing device I could (TCP/IP, etc)
    From the "My Network Places" window, tried "adding a new network place" (iMac doesn't show up)
    Clicking on the "Computers Near Me" icon (nothing but the PC itself shows up)
    Clicking on the "Add Network Place" icon (cannot find the iMac no matter what I type into the window, or when I click "Browse")
    Why is this so difficult? Why won't it work now when it did before? Why has the machine-to-machine capability of seeing each other steadily degenerated over time?
    I know I can go out and buy "Dave" to possibly get this working ... but I shouldn't have to, Tiger has been touted as the most amazing networking thing yet. And, it worked before.
    Is there a way to run a diagnostic on the networking function of Tiger? Could it have possibly been damaged?
    Any suggestions?

    This has been an ongoing annoyance for some time
    now.
    I cannot get my G4 iMac running the latest updated
    Tiger to connect to a PC running Win2K (home network)
    through a basic router and junction box.
    Both are connected to the internet (DSL) via a
    router, then one of those "splitter" or junction
    boxes (what's the right term for this thing?)
    you could mean a hub or a switch, but how many ports does your router have?
    the connection goes from the DSL outlet on the wall, to
    the router, then into this junction box, which then
    connects the iMac and the PC to the net.
    No problems with the net connection for both
    machines.
    Way back when I first had a different PC connected to
    this configuration, I COULD see the PC from the iMac,
    and vice versa. File sharing worked seamlessly.
    Then one day, for no good reason, the Mac could no
    longer "see" the PC ... but the PC could see the
    iMac. So I resigned myself to swapping files to and
    from the PC.
    Just recently, I changed internet providers for my
    DSL, resulting in an entirely new IP address setup
    for each machine. Both machines now get the net. But
    now NEITHER machine can see the other.
    This is not normal your internal ip addresses would remain the same even if when you change your ISP.
    From the Mac, I have tried:
    Clicking on the Network icon in the Finder
    Typing various different things into the window that
    results when I click "GO" then "Connect To Server" --
    the IP address of PC, the name of the PC, etc.
    Ensuring "Windows file sharing" is engaged in the
    "Sharing" window of the System Preferences
    Ensuring "Appleshare" is on
    Ensuring the firewall allows traffic with windows
    file sharing
    From the PC I have tried:
    Ensuring the main drive is shared
    Installed every network sharing device I could
    (TCP/IP, etc)
    From the "My Network Places" window, tried "adding a
    new network place" (iMac doesn't show up)
    Clicking on the "Computers Near Me" icon (nothing but
    the PC itself shows up)
    Clicking on the "Add Network Place" icon (cannot find
    the iMac no matter what I type into the window, or
    when I click "Browse")
    Why is this so difficult? Why won't it work now when
    it did before? Why has the machine-to-machine
    capability of seeing each other steadily degenerated
    over time?
    It sounds to me your network needs to be troubleshooted before we can answer that.
    I know I can go out and buy "Dave" to possibly get
    this working ... but I shouldn't have to, Tiger has
    been touted as the most amazing networking thing yet.
    And, it worked before.
    You don't need Dave at all. Samba is the pc filesharing protocol and that is built into Tiger.
    Is there a way to run a diagnostic on the networking
    function of Tiger? Could it have possibly been
    damaged?
    Yes there is away to diagnose your problem we can work on that.
    Any suggestions?
    What is the make and model of your dsl modem?
    What is the make and model of your router? What is the make and model of the box your refer to as splitter.
    Also goto the network preferces of your mac and post back what your ip address is and what router ip address you have.
    On your pc goto the start menu, click run, enter the work 'command' press enter.
    In the dos window type
    ipconfig
    press enter
    and post back the results.

  • Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational

    This error pops upon every restart of Windows Server 2012.
    Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational
    The process failed to handle ERROR_ELEVATION_REQUIRED during the creation of a child process.
    Event Viewer traces user to S-1-5-18 SYSTEM, Execution ProcessID in Task Manager corresponds to SVCHOST.EXE.
    SYSTEM is the owner of SVCHOST.EXE, even having granted SYSTEM permission Full Control does not fix the error.
    Any help will be appreciated.

    @Dharmesh, thanks for your advice.
    The specific SVCHOST process causing the error runs these services :
     - Application Experience
     - Application Information
     - Certificate Propagation
     - Group Policy Client
     - IKE and AuthIP IPsec Keying Modules
     - IP Helper
     - Multimedia Class Scheduler
     - Remote Access Connection Manager
     - Remote Desktop Configuration
     - Routing and Remote Access
     - Server
     - Shell Hardware Detection
     - System Event Notification Service
     - Task Scheduler
     - Themes
     - User Profile Service
     - Windows Management Instructmentation
     - Windows Update
    I doubted if any of those would actually need the ElevateCreateProcess fix.
    However, I gave it a try, applying the compatibility fixes at Server 2003 and Vista SP2 levels; yet the error was not corrected.
    So, combing through those services seemed unavoidable. Eventually, the culprit was identified.
    For the benefits of people encountering the same issue, this may help save some clueless efforts.
    Somehow, Windows Server setup a RaMgmtUIRestartTask in Task Scheduler, to run ramgmtui.exe as Administrators at log on of any user; but, not granting it the necessary permission. It is supposed to start the Remote Access Management console, failing which
    it logs the Event ID 1 Error, and gives little hint on the whereabouts of the cause.
    To stop the error, one would simply locate the scheduled task, then have it disabled, or check the option to grant it the highest privilege.

  • Finder error -36 when connecting to server - smbclient in terminal works

    Finder > Go > Connect to Server
    When ever I need to connect to a smb server using Finder, I get the constant error -36.
    In console :
    mount_smbfs: session setup phase failed: syserr = Socket is not connected
    mount_smbfs: could not login to server EXIT15: syserr = Socket is not connected
    mount_smbfs: 2 failures to open smb device: syserr = Resource busy
    mount_smbfs: session setup phase failed: syserr = Authentication error
    mount_smbfs: error from NetrShareEnum call: exception = 382312500
    I can sometimes select the share to mount, and it tries for a few seconds, never succeeds.
    10.4.10, but this was also case previously. We have every single Mac with this symptom so it is 7 work units at the moment, a Mac Pro, MacBook Pros, MacBook, Mac mini.
    Wired, wireless, and even VPN, no matter how the mac is connected to the net.
    Every non-Mac server at work tested gives this error when trying to connect to their shares.
    smbclient in terminal works.
    http://www.macwindows.com/tiger.html and Apple kbase article 301580 suggestions for nsmb.conf didn't make any difference. (the nsmb noauth being a very poor choice if it would work)
    smb.conf and nsmb.conf any security settings don't make any difference.
    I have working details for connection, so share, ip and dns name, username and password for connection work.
    Connecting from Terminal works.
    Connecting from any Windows or Linux virtual machine on Fusion on these same Macs work too.
    I have changed the workgroup to the correct one in Directory Access.
    I have tried all connection syntaxes suggested in http://www.macwindows.com/tiger.html - none of them still work in Finder, always identical results.
    smbclient //dns-name-or-ip/sharename -W workgroup -U username
    is the only viable workaround at the moment.
    Domain=[dnsnameofwhereconnected] OS=[EMC-SNAS:T5.4.21.400] Server=[NT1]
    is what smbclient gives for server details when its connected.
    As smb works from command line, it's not smb itself that is affected. Just Finder.
    I don't have access to edit any settings on the servers that we need to connect to. Only sharename and password that work for connection, but don't allow any editing on the server's settings.
    Ideas? This should work in Finder.
    Smbclient and Fusion area already somewhat workarounds, so I'm not looking for any third party software for dealing with this.
    I spent way too much time with AppleCare on this, and all I got was 90 minutes wasted.
    Ideas anyone???

    I think I have found what caused it. Not solved, but at least this seems so far the most likely cause:
    The share name contains hyphen.
    http://docs.info.apple.com/article.html?artnum=106471 Mac OS X 10.1 or later: How to Connect to Windows File Sharing (SMB) : Date Modified: August 01, 2007
    “6. You cannot connect to a share with a name that contains a hyphen. Resolve the issue by giving the share a name that does not contain a hyphen.”
    smbclient in Terminal is not limited to this "feature" of Finder of Mac OS X 10.1 that was not fixed or recoded to solve it or modify it since adding smb in it in 2001.
    It's not possible to test this changing the share name to one that does not contain a hyphen, nor to have one added in this server.
    For users that won't have Terminal access, the solution are .. remote desktop with admin user, have admin user come to mount the share in location, or use virtualization software and with it anything that works.
    Probably too optimistic to think the smb parts would have been rewritten for 10.5.

  • Windows 8.1 - Windows Couldn't connect to the System Event Notification Service service

    I have an issue that has been bothering me for a while on new 8.1 computers. Standard users are not able to log into the computer on the first try consistently. They receive the error message: Group Policy client service failed the sign-in access is
    denied. They are stuck at the logon screen.
    If an administrator logs in (local or domain), they can log in but get a black desktop with two error messages. The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable. The second error message is a popup
    balloon. It states "Failed to Connect to a Windows service. Windows couldn't connect to the System Event Notification Service service."
    When a standard user attempts to log in, event viewer records three warnings. They are listed in order from oldest to newest
    The winlogon notification subscriber <Profiles> was unavailable to handle a critical notification event. -Logged 9:14:44
    The winlogon notification subscriber <GPClient> failed a critical notification event. - Logged 9:14:44
    The winlogon notification subscriber <Profiles> was unavailable to handle a notification event. - Logged 9:14:49
    After a reboot, users still have the issue. I noticed that the user profile services and system event notification service are not running though their startup type is automatic. They start after a minute or two.

    Hi Joseph__Moody,
    Based on your description ,I assume it is a domain environment .First of all ,I would suggest you to try to update all the machine .
    "I have an issue that has been bothering me for a while on new 8.1 computers"
    Do you mean all the Windows 8.1 machine share the same symptom or just a specific one ?Did the machine work correctly before ?When did the issue start to occur ?Have you installed any third party software before ?Can we operate the machine when we login with
    an administrator account ?
    If the issue occurred with the specific machine :
    "The first is Location is Not available - C:\Windows\system32\config\systemprofile\Desktop is unavailable."
    Please try the following suggestions if we can operate the machine when we login with the administrator account :
    Open Windows Explorer and navigate to: C:\Windows\system32\config\systemprofile and verify if it has the Desktop folder there.If the folder doesn`t exit, we can copy from C:\users\Default\Desktop location(This folder is hidden by default).
    We also can try the following suggestions to have a troubleshoot :
    1.Run "sfc /scannow"or "dism /online /cleanup-image /restorehealth" to check the health of the system files.
    2.Perform a full scan with an antivirus software.
    3."They start after a minute or two."
    I suspect there is a third party service confilct here. Please perform a clean boot to verify whether there is a third party conflict here .
    How to perform a clean boot in Windows
    https://support.microsoft.com/en-us/kb/929135
    If the issue occurred with multiple machines in the domian ,I would suggest you to check whether you have configured any logon scripts and logon group policy .We can remove the machine from the domain to have  a troubleshoot .
    If the issue occurred recently ,we can perform a system restore to recover the machine to a previous normal point.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected].

  • How to write to windows event logs from determinations-server under IIS

    This is just an FYI technical bit of information I wish someone had shared with me before I started trying to write OPA errors to the windows event log... Most problems writing to the windows event log from log4net occur because of permissions. Some problems are because determinations-server does not have permissions to create some registry entries. Some problems cannot be resolved unless specific registry entry permissions are actually changed. We had very little consistency with the needed changes across our servers, but some combination of the following would always get the logging to the windows event log working.
    To see log4net errors as log4net attempts to utilize the windows event log, temporarily add the following to the web.config:
    <appSettings>
    <!-- uncomment the following line to send diagnostic messages about the log configuration file to the debug trace.
    Debug trace can be seen when attached to IIS in a debugger, or it can be redirected to a file, see
    http://logging.apache.org/log4net/release/faq.html in the section "How do I enable log4net internal debugging?" -->
    <add key="log4net.Internal.Debug" value="true"/>
    </appSettings>
    <system.diagnostics>
    <trace autoflush="true">
    <listeners>
    <add
    name="textWriterTraceListener"
    type="System.Diagnostics.TextWriterTraceListener"
    initializeData="logs/InfoDSLog.txt" />
    </listeners>
    </trace>
    </system.diagnostics>
    To add an appender for the windows event viewer, try the following in the log4net.xml:
    <appender name="EventLogAppender" type="log4net.Appender.EventLogAppender" >
    <param name="ApplicationName" value="OPA" />
    <param name="LogName" value="OPA" />
    <param name="Threshold" value="all" />
    <layout type="log4net.Layout.PatternLayout">
    <conversionPattern value="%date [%thread] %-5level %logger [%property{NDC}] - %message%newline" />
    </layout>
    <filter type="log4net.Filter.LevelRangeFilter">
    <levelMin value="WARN" />
    <levelMax value="FATAL" />
    </filter>
    </appender>
    <root>
    <level value="warn"/>
    <appender-ref ref="EventLogAppender"/>
    </root>
    To put the OPA logs under the Application Event Log group, try this:
    Create an event source under the Application event log in Registry Editor. To do this, follow these steps:
    1.     Click Start, and then click Run.
    2.     In the Open text box, type regedit.
    3.     Locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application
    4.     Right-click the Application subkey, point to New, and then click Key.
    5.     Type OPA for the key name.
    6.     Close Registry Editor.
    To put the OPA logs under a custom OPA Event Log group (as in the demo appender above), try this:
    Create an event log in Registry Editor. To do this, follow these steps:
    1.     Click Start, and then click Run.
    2.     In the Open text box, type regedit.
    3.     Locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
    4.     Right-click the eventlog subkey, point to New, and then click Key.
    5.     Type OPA for the key name.
    6.     Right-click the new OPA key and add a new DWORD called "MaxSize" and set it to "1400000" which is about 20 Meg in order to keep the log file from getting too large.
    7.     The next steps either help or sometimes cause an error, but you can try these next few steps... If you get an error about a source already existing, then you can delete the key.
    8.     Right-click the OPA subkey, point to New, and then click Key.
    9.     Type OPA for the key name.
    10.     Close Registry Editor.
    You might need to change permissions so OPA can write to the event log in Registry Editor.  If you get permission errors, try following these steps:
    1.     Click Start, and then click Run.
    2.     In the Open text box, type regedit.
    3.     Locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
    4.     Right-click the EventLog key, select Permissions.
    5.     In the dialog that pops up, click Add...
    6.     Click Advanced...
    7.     Click Locations... and select the current machine by name.
    8.     Click Find Now
    9.     Select both the Network user and IIS_IUSERS user and click OK and OK again. (We never did figure out which of those two users was the one that fixed our permission problem.)
    10.     Change the Network user to have Full Control
    11.     Click Apply and OK
    To verify OPA Logging to the windows event logs from Determinations-Server:
    Go to the IIS determinations-server application within Server Manager.
    Under Manage Application -> Browse Application click the http link to pull up the local "Available Services" web page that show the wsdl endpoints.
    Select the /determinations-server/server/soap.asmx?wsdl link
    Go to the URL and remove the "?wsdl" from the end of the url and refresh. This will throw the following error into the logs:
    ERROR Oracle.Determinations.Server.DSServlet [(null)] - Invalid get request: /determinations-server/server/soap.asmx
    That error should show up in the windows event log, OR you can get a message explaining why security stopped you in "logs/InfoDSLog.txt" if you used the web.config settings from above.
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa363648(v=vs.85).aspx
    Edited by: Paul Fowler on Feb 21, 2013 9:45 AM

    Thanks for sharing this information Paul.

  • Remote Desktop "Bypass RD gateway server for local addresses" no longer working in Windows 8

    Hi,
    After installing windows 8, it seems like the "Bypass RD gateway server for local addresses" is no longer working.
    In Windows 7, when the option is checked, I could have the server name set always and the client will automatically detect whether to use the RD gateway or not. For example, from my house, if I am connecting to a computer at my work, which requires
    the RD gateway, it will automatically pops up the dialog for authentication method. However, if I connect to a computer in my home network, it will just automatically connects without asking authentication for the RD gateway.
    However, after installing windows 8, this does not seem to work as expected anymore. The option is checked but the Windows Security dialog pops up in both situations and so i have to either save the rdp file locally and pin it to the taskbar or switch between
    disabling and enabling the RD gateway whenever I need to connect to different machines.
    Is this a regression in Windows 8? Is anyone else experiencing the same issue?
    Thanks

    Another way to resolve this issue for me, beside of configuring RDP to connect directly to server also on unmanaged network, will be to turn the "wifi" subnet in a managed network, as the "wired" subnet is.
    The differences between thoses to subnets, dynamically assigned by the same DHCP server, are:
    The "wifi" is in a private IP range, the "wired" is in a public IP range
    There's an ACL on the "wifi" subnet, not on the "wired"
    The next step is to compare frames send/received when on the two networks. Something will likely tell for the network to be managed.
    Beside, I'm still searching informations about NLA, which is responsible for setting a nework as managed or not.
    Here are some clues:
    http://blogs.technet.com/b/networking/archive/2010/09/08/network-location-awareness-nla-and-how-it-relates-to-windows-firewall-profiles.aspx
    http://social.technet.microsoft.com/Forums/windows/en-US/49ea0a6b-9c03-407d-8e26-24a92849a282/network-location-awareness-signature?forum=w7itpronetworking
    If anybody has official MS informations about NLA (A for Awareness and not Authentication), please share!

  • Windows 8 can not connect RemoteApp on W2K12 RDS, but Windows 7 can connect. Why?

    Hi!
    Windows 8 can not connect RemoteApp (W2K12 RDS), but Windows 7 can connect. Why?
    External and internal DNS name is different, the public Cert is mapped to RD Web Access and a RD GateWay Role.
    The internal cert (issued by enterprise ca) is mapped to RD Connection Broker roles (SSO and Publishing).
    These certifications also be installed on client computers (Personal and Trusted Root Certification Authorities).
    The internal CA revocation list is publicated to a website and this web site is accessible from internet. Ports (3389,3391,443) forwarded to RDS server.
    On windows 7 everything works fine, but Windows 8 can not connect to Remote Apps. Windows 8 can connect to RDS server via Remote Desktop Connection.
    The error:
    Thank you for your answers.

    Check this thread -> 
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/0c0d7c4a-e422-4a6c-99eb-66df26a1ffc6/rdp8-your-computer-cant-connect-to-the-remote-computer-because-an-error-occurred?forum=winserverTS
    and this
    http://support.microsoft.com/kb/2903333
    HTH,
    JB

  • "BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2

    I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_FILTER created
    (DB) INFO: BADI_FILTER~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
    (IMP) ERROR: EndFastload: rc = 2
    (DB) INFO: BADI_IMPL created
    (DB) INFO: BADI_IMPL~0 created
    (IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
    (IMP) ERROR: EndFastload: rc = 2
    Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
    Thanks in advance,
    Michael

    Set BCP_LOB=1 in your system environment
    Note 1156361 - R3load: Fastload doesn't support LOB-columns
    Markus

  • Operations error occured when executing LDAP query to read members of AD group in windows 8 operating system using javascript and active-x

     My code javascript script  is
     objConnection = new ActiveXObject("ADODB.Connection");
     objConnection.Provider="ADsDSOObject";
     objConnection.Open("ADs Provider");
     objCommand = new ActiveXObject("ADODB.Command");
     objCommand.ActiveConnection = objConnection;
       objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN,    mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
    and objectClass='group' and sAMAccountName='"+GrpName+"'";
    objRecordSet = objCommand.Execute();
    This code executes successfully on window 2008 server machine,
    but gives "Operations error occurred" on windows 8 operating system
    on line of code highlighted above

    Hi,
    In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
    The Official Scripting Guys Forum
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    Thank you for your understanding and support.
    Best Regards,
    Amy Wang

  • Sort the list of Favorite Servers, in the Connect to Server window?

    Hello...
    In 10.5 and 10.6, can I change the order of the Favorite Servers list in the Connect to Server window?
    I see the data is stored as files in ~/Library/Favorites, but I'm not seeing where the Connect to Server window gets its sort order.
    TIA

    Greg --
    Guillaume is totally correct.  The display order of enterprise templates is by the date they were created.  I have tested this on a Project Server 2013 system that has the latest Cumulative Updates applied.  The problem is that in the
    Microsoft Project 2013 desktop application, Microsoft has ditched the Templates dialog we used to see and replaced it with a page in the Backstage.  I am afraid that in doing so, they have eliminated the sorting capabilities that we found in earlier versions.
    Out of curiosity, I have sent an e-mail to my MPV contacts within the Microsoft Project Server development team at Microsoft, asking if there is any intention of changing this functionality to allow for sorting by template name.  If I get an answer,
    I will post it in this user forum.
    Your question is a good one, and the sorting problem (or lack of sorting) can be a real problem in any organization that has a sizable number of enterprise templates.  Hope this additional bit helps.
    Dale A. Howard [MVP]

Maybe you are looking for

  • Windows Vista Home + iTunes = no DVD drives

    I am a long time iTunes user, and have been having an issue with iTunes for the last little while. When I install iTunes (I'm on Windows Vista 32 bit, by the way), after the required restart, my DVD drives' icons disappear (I have 2 of them). I can s

  • Scanned image in Browser is not getting refreshed

    Hi We are facing a strange issue. We have scanned an invoice and this is stored in the R/# system. Now when the user clicks on a scanned image the user gets a scanned document that he has opened previous to this. Now once h closes this and again clic

  • File manager with "My files"?

    iam need to ask : where the my files on my xperia z1 .... download a program or the system have a my files  please help me iam need my files !!  http://im90.gulfup.com/uwws7Z.jpg Topic edited by Rickard

  • Where can you change the default reference point?

    Screenshot provided where you can manually change it on an object, but I would like to change it so that the Top Left is selected by default. I'm a web developer, and just like the web all my designs origins are anchored to the top left. Thanks.

  • Slide background font color have been changed

    Hi there! I have a question need your help. Please see the following pictures. The first one is before preview, the second one is after preview. I don't know why the font color have been changed?