Service Area not updating through FM in WebUI in WFM

Hi ,
I am working on WFM in CRM 7.2 .I am Creating an upload program for exisitng employees ,for employees I need to create Service Arrangement. In service arrangement, need to create service area, qualifications, availability using program.
I am able to create service arrangement using FM L WFDBP_SA_CREATE in program. After creation , I am able to see Service arrangement in webui.
In the same program i am creating Service area using FM: WFD_SERVICE_AREA_ADD. I am not able to see service arrangement in webUi. If I execute FM: WFD_SERVICE_AREA_GET seperately in GUI, I am able to see service areas in result table.
Can you please suggest why it is not appearing in webUI.
Note: Refer to attachement for service area assignment block.
regards,
Raj.
Message was edited by: j raj

Thanks for the Responce,
So i think the Std Func Module can be modified by generating Accessing code
or
should I place a Product errror in OSS ??
Pl advice
Regards,
Sonali sur

Similar Messages

My mac contacts are not updating through icloud?

I am puting new conacts on my phone and ipad but they are not being updated through to my mac any ideas?

Please try the following…
    1.    First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    2.    Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
    3.    If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Ltbp are not updated through 'L_TO_CREATE_MULTIPLE'.

Hello,
we are able to create TOs for TR created wth MB1B but which is not consistent .related table LTBP is not getting updated with TANUM created for the TR number .
Please let me know how to resolve this ..Thanlks a Lot.

Hello ,
Thanks for the reply , and below is my case .
- I am creating Material Documents using MB1B which inturn creates Transfer Requirement .
- With reference to the Transfer requirement created , I am trying to create Transfer Order using L_TO_CREATE_MULTIPLE function module by providing the Quants and Source Bins from where stoick has to be removed . Below is the code i m iusing .
e_lgnum = gv_lgnum.
e_benum = gv_tbnum.
e_bwlvs = '311'.
LOOP AT t_upload.
    t_ltap_creat-matnr = t_upload-matnr.
    t_ltap_creat-werks = <Plant>'.
    t_ltap_creat-lgort = '1000'.
    t_ltap_creat-anfme = t_upload-qty.
    t_ltap_creat-altme = t_upload-uom.
    t_ltap_creat-vltyp = <StType>
    t_ltap_creat-vlpla = t_upload-bin. ---BIN
    APPEND t_ltap_creat.
ENDLOOP.
Please advise what is missing in this ...or is there any other FM to do this .
Thanks
CALL FUNCTION 'L_TO_CREATE_MULTIPLE'
    EXPORTING
      i_lgnum                      = e_lgnum
      i_bwlvs                      = e_bwlvs
   I_BETYP                      = ' '
     i_benum                      = e_benum
I_LZNUM                      = ' '
   I_NIDRU                      = 'X'
I_DRUKZ                      = ' '
   I_NOSPL                      = 'X'
   I_UPDATE_TASK                = 'X'
     i_commit_work                = 'X'
     i_bname                      = sy-uname
     i_kompl                      = 'X'
I_SOLEX                      = 0
I_PERNR                      = 0
I_MINWM                      = ' '
I_AUSFB                      = ' '
   IMPORTING
     e_tanum                      = i_tanum
    TABLES
      t_ltap_creat                 = t_ltap_creat
   T_LTAK                       = T_LTAK
   T_LTAP_VB                    = T_LTAP_VB
   EXCEPTIONS
     no_to_created                = 1
     bwlvs_wrong                  = 2
     betyp_wrong                  = 3
     benum_missing                = 4
     betyp_missing                = 5
     foreign_lock                 = 6
     vltyp_wrong                  = 7
     vlpla_wrong                  = 8
     vltyp_missing                = 9
     nltyp_wrong                  = 10
     nlpla_wrong                  = 11
     nltyp_missing                = 12
     rltyp_wrong                  = 13
     rlpla_wrong                  = 14
     rltyp_missing                = 15
     squit_forbidden              = 16
     manual_to_forbidden          = 17
     letyp_wrong                  = 18
     vlpla_missing                = 19
     nlpla_missing                = 20
     sobkz_wrong                  = 21
     sobkz_missing                = 22
     sonum_missing                = 23
     bestq_wrong                  = 24
     lgber_wrong                  = 25
     xfeld_wrong                  = 26
     date_wrong                   = 27
     drukz_wrong                  = 28
     ldest_wrong                  = 29
     update_without_commit        = 30
     no_authority                 = 31
     material_not_found           = 32
     lenum_wrong                  = 33
     matnr_missing                = 34
     werks_missing                = 35
     anfme_missing                = 36
     altme_missing                = 37
     lgort_wrong_or_missing       = 38
     OTHERS                       = 39
IF sy-subrc <> 0.
ENDIF.
- Here I could able to see the Transfer Order created , but the Stock Levels for the Materials at WM Level are wrong .and moreover the link between Transfer Requirement and Transfer Order is not getting updated .I mean in table LTBP is getting updated with Transfer Order Number TANUM .

Qty and value in PO list are not updated (after a Service Entry)

Hi Experts,
Qty and value still to be delivered in the ME2L are not updated:
I have performed a service entry (ML81N) but qty and value are not updated in the list of the PO in the ME2L.
Could anyone explain?
Many thanks in advance.
Regards,
Cesar

Thanks for quick reply.
I do not configure anything in SPRO (Define release strategy for SES) but I got a red light in the top of the screen near the field "No acceptance" so I presume that the SES should be accepted but as I do not configure anything regarding release startegy, I do not know how to accept the SES.
Besides, I cannot perform MIRO: when I put the PO number, system indicates that there is no (suitable) item found for PO
I should have miss something. Could you please guide me?
Thanks,
Cesar

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

Service Tax not updating in Table J_1ISERVC

Hi,
When i do Service Tax scenario, I have done the process from Sale Order and billing and other things. postings are made correctly. But the service tax values are not updating in Table J_1ISERVC
Because of this issues,we are not able to generate ST3 Report. Please provide me some inputs regarding this..
Thanks
Sasi Kanth

Hi,
For service Tax report, there is a report called ST3 but it is not yet implemented by SAP and still it is in testing. So, we need to develop an ALV report for Service tax from this Table.
That is the reason we need to update in this table. Kindly provide me few inputs.
Thanks

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up?

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up? Anyone else having these issues?

There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

Custom propertie's values are not updated for workflow metadata

Hi,
I've a requirement where I need to add and update some properties. to /etc/workflow/instance/<Instancename>/data/metadata node.
I've two workflow Process steps,
Process step 1:
    Adds some properties to metadata.
Process step 2:
    Updates the propertie's values which are added in Process step 1.
But the issue is update is not working when the node is /etc/workflow/instance/<Instancename>/data/metadata.
i.e. In the step 1, Properties are added to metadata node but In the step 2 propertie's values are not updated to the same node.
Here is my process code:
=================================================
import java.util.Locale;
import java.util.StringTokenizer;
import javax.jcr.Node;
import javax.jcr.Session;
import org.apache.felix.scr.annotations.Component;
import org.apache.felix.scr.annotations.Properties;
import org.apache.felix.scr.annotations.Property;
import org.apache.felix.scr.annotations.Reference;
import org.apache.felix.scr.annotations.Service;
import org.osgi.framework.Constants;
import javax.jcr.Value;
import com.adobe.granite.workflow.WorkflowException;
import com.adobe.granite.workflow.WorkflowSession;
import com.adobe.granite.workflow.exec.WorkItem;
import com.adobe.granite.workflow.metadata.MetaDataMap;
import com.adobe.granite.workflow.exec.WorkflowProcess;
import com.adobe.granite.workflow.model.WorkflowModel;
import org.apache.sling.api.resource.ResourceResolver;
import org.apache.sling.api.resource.ResourceResolverFactory;
import org.apache.sling.jcr.resource.JcrResourceUtil;
import org.apache.sling.api.resource.PersistableValueMap;
import org.apache.sling.api.resource.PersistenceException;
import org.apache.sling.api.resource.Resource;
@Component
@Service
@Properties({
       @Property(name = Constants.SERVICE_DESCRIPTION, value = "Test"),
       @Property(name = Constants.SERVICE_VENDOR, value = "Adobe"),
       @Property(name = "process.label", value = "Test 1")})
public class Test1 implements WorkflowProcess
    @Reference
    private ResourceResolverFactory resourceResolverFactory;
          public void execute(WorkItem workItem, WorkflowSession wfsession, MetaDataMap metadata)
                              throws WorkflowException {
                    System.out.println("Testing");
        try{
            ResourceResolver resolver;
            resolver = resourceResolverFactory.getAdministrativeResourceResolver(null);
            String instancePath = workItem.getWorkflow().getId();
            Node instanceNode=null;
            Session jcrSession = wfsession.adaptTo(Session.class);
           String payload = (String) workItem.getWorkflowData().getPayload();
           //instanceNode=JcrResourceUtil.createPath(payload+"/jcr:content", "nt:resource","nt:resource", jcrSession, true);
                              instanceNode=JcrResourceUtil.createPath(instancePath+"/data/metaData", "nt:resource","nt:resource", jcrSession, true);
                              System.out.println("Test: instance PAth:"+instanceNode.getPath());
            Resource resource = resolver.getResource(instanceNode.getPath());
                if(resource != null)
                    PersistableValueMap valueMap= resource.adaptTo(PersistableValueMap.class);
                    valueMap.put("name", "Rajesh");
                    valueMap.put("id", "A002");
                    valueMap.put("designation","SE");
                    valueMap.save();
                    System.out.println("Name:"+valueMap.get("name"));
                    System.out.println("Id:"+valueMap.get("id"));
            jcrSession.save();
            resolver.close();
        }catch(Exception e)
            System.out.println("Exception:"+e.getMessage());
===================
The code works fine when the node is payload/jcr:content.
Note : Process 1 and Process 2 code is same expect the values I'm passing to the PersistableValueMap.
Any pointers would be more helpful..
Thanks
Siva

Is there anything wrong in my code/ it's a bug..
Thanks
Siva

My emails are not coming through to my blackberry phone....

My emails are not coming through to my blackberry phone. I think it is because I changed my password to my email?

Hi there!
If you changed your email password, then you need to change the stored credentials within BIS. See this demo for how to access your BIS configuration:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
If that does not work, then please return to these forums (http://supportforums.blackberry.com/rim/) and register an account so that we can provide you with direct assistance.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Half the engines are not updating wanted to update Forefront Protection 2010 for Exchange Server to newest sevice pack

Running forefront protection 2010 for exchange. The version of Exchange we are running is Exchange Server 2007 sp3 rollup 13. I am seeing that half our engines are not updating for forefront. Currently we are running version 10.1.0746 sp1 for Forefront.
I would like to get this up to the newest version which I think is SP2. Where can I download just the service pack 2 and will I have any problem with the version of exchange I am running. Thanks in advance for any help.
John

Hi,
I guess you are talking about Microsoft Forefront Security for Exchange Server.
You could have a look on the following blog.
http://blogs.technet.com/b/fss/archive/2009/12/10/migrating-from-forefront-security-for-exchange-server-to-forefront-protection-2010-for-exchange-server.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Media Services Are Not Available"

I'm new...trying to get my photos off of my Blackberry Curve 8520 , and put some music on my Blackberry.
I just installed the Blackberry Desktop Software. On my Blackberry, under Options -> Memory I have Mass Storage Mode Support set to On, and Auto Enable Mass Storage Mode When Connected set to Yes. I apparently have 128.6 MB available which doesn't seem like a lot, but whatever.
In the Blackberry Desktop Software, under Media Sync, the Music, Pictures and Videos tabs all tell me,
"Media Services are not available.
Media Storage is not available.
Please check that a media card is installed correctly in your Blackberry device and that mass storage mode is turned on."
Now, I never put a media card in my device and as far as I can tell there wasn't one in the box, so I'm going to assume I don't have one. Is this normal? Do I really need one in order to transfer files to my PC?

Hi
There's no media card in your device.Get one.
If still need to confirm through your device, do the following:
Go to options>memory, There you can check if media card is inserted or not.
One is application memory that you are telling is 128.6 Mb. Below that is Media Card under which you can see the total space and free space. If you are unable to find this media card and details below, then there's no media card inserted for sure.
Regards
Ankush

Excise Tables are not updating

Hi,
I have a issue in Depot sale. I created a GR against a PO. Then I posted a Excise invoice. But the excise tables are not updating.
Why it so? Plz explain.......
Thanks & Regards
Saeed

Hi,
While doing the GR through T Code MIGO ( Good Receipt + Purchase Order) > Tick on "Item Ok" & Enter > and see one more additional menu will appear > Excise Invoice >Is there two options 1) No Excise Entry 2) Create RG23D Entry.
If you need to update Excise detail through MIGO you can select "Create RG23D Entry" or if you not require to update Excise entry through MIGO you can select "No Excise Entry" & after generating the GR document you can proceed for Excise updation through T Code J1IG.
Hope that you are understood.
Thanks & Regds,
Rajesh Kolhe

GR's are not updating "Actual" Value under the limit tab in PO

Hi Friends
Can anyone tell me the possible solution for GR's value are not updating in the "Actual" Value under the limit tab in the service PO.
Thanks in Advance

Hi,
I hope this is a service PO with item category D and the GR you mean is the service entry sheet.
Do you have an entry in the Purchase order history for the PO for this?
Do you have an acceptance for the service entry sheet which is complete?
Best regards,
Sridhar

Service Area not updating through FM in WebUI in WFM

Similar Messages

Maybe you are looking for