Service Po Report.

hi
is there any t.code to view list of service Po's
ex.
po with 1 line item
in services Tab we have 50 service line items only text no service masters.
so how can i down load those 50 service line iems against that PO.
no information in ME2N, ME2L,ME2M.
RAMESH.

Hello,
Check MSRV6 t- code.
Regards,
Shailesh

Similar Messages

Regarding selection screen fields in Service PO Report

Hello All,
   I have developed a Service PO Report with input parameters like Purch. Organisation, Material Group, Purchasing Group, Plant, PO No., Vendor, Activity, Entry Sheet No., GR No. I have used the tables ekko, ekpo, ekbe, essr, ml_esll, mseg and lfa1.
When I input a particular Purch. Organisation,   I am able to get the output filtered by that Purch. Organisation. Similarly, when I input other fields individually, I get the filtered output based on the value of the fields that I inputted.
The problem is that when I select only a particular GR No. in the selection screen, I am not able to get the filtered output for that particular GR No. Its showing all the unnecessary data for that particular GR No.
Except this field, the report is running fine. So can anybody guide me in getting the filtered output based on GR No.?
I have linked tables ekko, ekbe and mseg.

I have pasted the code below for analysis.
form fetch.
select ek~ebeln
       ek~loekz
       ek~lifnr
       ek~ekorg
       ek~ekgrp
       ek~bedat
       ek~bukrs
       ep~ebelp
       ep~txz01
       ep~werks
       ep~matkl
       ep~mwskz
       ep~menge
       ep~meins
       ep~netpr
       ep~netwr
       ep~mwskz
       into corresponding fields of table it_ekko
       from ekko as ek join ekpo as ep
       on ek~ebeln = ep~ebeln
       and ek~loekz = ep~loekz
       and ek~bukrs = ep~bukrs
       where ek~ebeln in s_ebeln
       and ek~lifnr in s_lifnr
       and ek~ekorg in s_ekorg
       and ek~ekgrp in s_ekgrp
       and ep~werks in s_werks
       and ep~matkl in s_matkl.
if sy-subrc = 0.
    select lifnr name1 from lfa1
       into corresponding fields of table it_lfa1
       for all entries in it_ekko
       where lifnr = it_ekko-lifnr.
endif.
if sy-subrc = 0.
    select lblni lzvon lwert packno txz01 ebeln loekz budat netwr from essr
       into corresponding fields of table it_essr
       for all entries in it_ekko
       where lzvon in s_lzvon
         and lblni in s_lblni
         and ebeln = it_ekko-ebeln.
endif.
if sy-subrc = 0.
    select mblnr ebeln erfmg lfbnr from mseg
      into corresponding fields of table it_mseg
        for all entries in it_essr
        where mblnr in s_mblnr
          and lfbnr = it_essr-lblni
          and ebeln = it_essr-ebeln.
endif.
if sy-subrc = 0.
select packno ebeln srvpos ktext1 netwr menge matkl tbtwr meins mwskz from ml_esll
       into corresponding fields of table it_ml_esll
       for all entries in it_essr
       where srvpos in s_srvpos
        and ebeln = it_essr-lblni.
endif.
if sy-subrc = 0.
select packno srvpos menge meins netwr ebeln tbtwr from ml_esll
        into corresponding fields of table it_ml_esll1
        for all entries in it_ekko
         where ebeln = it_ekko-ebeln.
endif.
if sy-subrc = 0.
select ebeln vgabe belnr lfbnr mwskz srvpos packno from ekbe
        into corresponding fields of table it_ekbe
          for all entries in it_ekko
            where ebeln = it_ekko-ebeln
            and vgabe = 1.
endif.
if sy-subrc = 0.
select ebeln belnr bewtp from ekbe into corresponding fields of table it_ekbe1
        for all entries in it_ekko
          where ebeln = it_ekko-ebeln
          and   bewtp = 'Q'.
endif.
loop at it_ml_esll into wa_ml_esll.
    move wa_ml_esll-packno to wa_final-packno.
    move wa_ml_esll-ebeln to wa_final-ebeln1.
    move wa_ml_esll-srvpos to wa_final-srvpos.
    move wa_ml_esll-ktext1 to wa_final-ktext1.
    move wa_ml_esll-meins to wa_final-meins.
    move wa_ml_esll-menge to wa_final-menge1.
    read table it_essr into wa_essr with key lblni = wa_ml_esll-ebeln.
    if sy-subrc = 0.
      move-corresponding wa_essr to wa_final.
    endif.
    read table it_ekko into wa_ekko with key ebeln = wa_essr-ebeln.
    if sy-subrc = 0.
      move wa_ekko-werks to wa_final-werks.
      move wa_ekko-ekorg to wa_final-ekorg.
      move wa_ekko-ekgrp to wa_final-ekgrp.
      move wa_ekko-ebeln to wa_final-ebeln.
      move wa_ekko-menge to wa_final-menge.
      move wa_ekko-matkl to wa_final-matkl.
      move wa_ekko-mwskz to wa_final-mwskz.
      move wa_ekko-lifnr to wa_final-lifnr.
      move wa_ekko-bedat to wa_final-bedat.
      move wa_ekko-netpr to wa_final-netpr.
    endif.
    read table it_lfa1 into wa_lfa1 with key lifnr = wa_ekko-lifnr.
     if sy-subrc = 0.
      move wa_lfa1-lifnr to wa_final-lifnr.
      move wa_lfa1-name1 to wa_final-name1.
    endif.
    read table it_ekbe into wa_ekbe with key lfbnr = wa_ml_esll-ebeln
                                             packno = wa_ml_esll-packno
                                             srvpos = wa_ml_esll-srvpos.
    if sy-subrc = 0.
      move wa_ekbe-belnr to wa_final-belnr.
    endif.
    read table it_ekbe1 into wa_ekbe1 with key ebeln = wa_ekko-ebeln.
    if sy-subrc = 0.
      move wa_ekbe1-belnr to wa_final-belnr1.
    endif.
    read table it_ml_esll1 into wa_ml_esll1 with key srvpos = wa_ml_esll-srvpos.
    if sy-subrc = 0.
      move wa_ml_esll1-menge to wa_final-menge2.
      move wa_ml_esll1-netwr to wa_final-netwr.
      move wa_ml_esll1-tbtwr to wa_final-tbtwr.
    endif.
    read table it_mseg into wa_mseg with key lfbnr = wa_essr-lblni
                                             ebeln = wa_essr-ebeln.
    if sy-subrc = 0.
        move wa_mseg-mblnr to wa_final-mblnr.
        move wa_mseg-erfmg to wa_final-erfmg.
    endif.
    append wa_final to it_final.
endloop.
delete it_final where srvpos is initial.
sort it_final by srvpos lblni ebeln .
Edited by: Satvikpanchal on Dec 6, 2011 11:01 AM

XML Publisher with Service Module - Service Request Reports -- URGENT

Hi all ... any pointers/help/guidance with the problem listed below would be much appreciated.
I'm working in the context of the Oracle Service Module & Service Request Reports.
I'm required to configure the XML Publisher Responsibility seeded functionality with the service module reports.
Listed below are the two reporting requirements that I'm considering , corresponding to the following seeded XMLP Responsibility seeded components:
(I'm quoting an extract from the Oracle TeleService Implementation & User Guide here).
Detailed Report
Data Definition: Service Request Detail Definition (CS_SR_DETAIL_DEF)
Corresponding Template: Service Request Detail Report Template (CS_SR_DETAIL_TMP.en)
Template Description: Includes all of the available service request attributes including charges, the two descriptive flexfields, and extensible attributes.
Summary Report
Data Definition: Service Request Summary Definition (CS_SR_SUMMARY_DEF)
Corresponding Template: Service Request Summary Report Template (CS_SR_SUMMARY_TMP_en)
Template Description: Includes a subset of the detailed report attributes including the same charges information as the detailed report.
When I log into the EBS >> XML Publisher Administrator Responsibility >> Service Application ... I find these seeded XMLP components, together with the preview data, downloadable templates & sample output.
The question is:
Where (responsibility/application/navigation/etc.) do I find the seeded EBS Service Reports to provide the expected XML input to the seeded XMLP Service Request Data Definitions & Templates????
Notes ...
I have found the following two reports, under the Service Application in EBS, set their output type to XML and viewed the output of the submitted request:
- Service Request Detail Report
- Service Request Summary Report
... but each of these two reports produce XML output of a different data model/structure to that expected by each of the corresponding seeded XMLP data-definitions/templates.
Additionally, I cannot find any corresponding concurrent program definitions on the system with the same SHORT-NAME/CODE as the seeded XMLP data definitions themselves i.e. CS_SR_DETAIL_DEF and CS_SR_SUMMARY_DEF.
Are the necessary reports not actually seeded within EBS? Do the seeded XMLP data definitions & templates require development of new Concurrent Programs from scratch to access the database tables and provide the necessary data/input, or am I missing something here??

I am sure you found a solution to your problem. If not, to give a pointer to this issue, I guess these reports are gererated right from the service request screen and this definition is used there.This report can be generated from several places based on where you are within SR scree.
Thanks
Nagamohan

How to configure Service Level Reporting???

Hi All,
I have to configure Service Lever Reporing (SLR) on my solution manager for managed systems. Can any one please help me in configuring it? A Step-by-step explanation will be a great help.
Waiting for your kind responses.
Regards,
Faisal

Hi Jared,
Thanks for sharing the link. I have gone through the link.
However, when I edit the "Setup Service Level Reporting" by click the link under "Solution Monitoring->Service Level Reporting" under "Operations Setup", I could get the screen where in I found the below details:
1. Setup SL Reporting (On the left Pane)
2. Variants Administration (under the above head tree)
On the right pane, I could find:
1. Name
2. Type
3. Weeday of Processing
4. Active
5. Date of Next Report
I could successfully give the above details and saved it. However, I dont see any provision for seleting the system SIDs as mentioned in the help.sap.com site proposed by you.
May you help me in selecting the System SID for which I need to declare SLR?
Regards,
Syed

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
Sorry for the long title, first time poster here.

This thread is pretty old, are you still having this issue?

Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
Error encountered while signing:
The Windows Cryptographic Service Provider reported an error:
Access was denied because of a security violation.
Error Code: 2148532330

I assume you are implying "biztax" application here, right?
I have contacted their program lead, with no result at all.
Past days I have been searching for a solution - reinstalls / new systems - no solution.
This issue appeared a week or two ago only.
I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
If anyone finds a solution to this issue, please do let me know - any help is appreciated.
Biztax tells to use the "signature", not the "authentication" - but it is only Auth. that is showing up as option to sign (that works)
ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
> I noticed that when I try to open the pdf document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader". every piece of info helps I guess.
Obviously last version of Reader 11.0.03

Solution and Service level Reporting in Solution Manager

Hi All,
I have got some requirement , can anyone please provide me the link/blog regarding Solution and Service level Reporting.
Thanks,
vk

Hi,
got confused since previous you said it was enterprise service report,
https://websmp207.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000742027&_OBJECT=011000358700000999072011E
the Following SAP notes
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442799
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1250529
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1391968
Thanks
Jansi

Performance Point Services vs Reporting Services

I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the article which
differentiate between both the servies

In short, SSRS is great for drill-down (matrix) reports and free-form reports, PPS is great for building dashboards, KPIs and predictive reports. Also see:
http://www.mssqltips.com/sqlservertip/2737/sql-server-reporting-services-vs-performancepoint-services/
http://businessintelligist.com/2012/04/02/comparing-performancepoint-powerview-excel-services-and-reporting-services/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Service PO report query

Dear All Abapers,
    I have developed a service PO report. Reference t-codes are ml81n and me23n. The query is regarding Entry sheet number for a particular PO number. If the user saves and posts an entry sheet no, a GR No. is made and it is reflected in my report. But if a user ONLY SAVES an entry sheet number (without posting), it is not reflected in my report but is reflected in the database tables which I have used. EKBE table in this case. So, what condition should I put so that 'only saved' entry sheet numbers are also reflected?

The select query is for fetching entry sheet number is:
select ebeln belnr bwart bewtp menge xblnr lfbnr mwskz shkzg srvpos packno from ekbe
        into corresponding fields of table it_ekbe
          for all entries in it_ekko
            where belnr in s_belnr
              and lfbnr in s_lfbnr
              and ebeln = it_ekko-ebeln
              and bwart = '101'
              and bewtp eq 'E'.      "for service acceptance no. (GR no.)
Here I have taken lfbnr as entry sheet number.

Need Service Tax Report

Hello friends,
Can any one help me in getting the service tax report as per the Indian Service Tax laws, wherein the service tax is payable on payment basis.
Hope this problem exists for all sap users in India. If any code is written, please share it so that it can used for the benefit of all.
REgards
Dhirav Shah

Hi Dhirav,
Please refer the below note from SAP
Note 779512 - Master Note for Service Tax
"Regarding the reporting requirements, we will update the status as soon as we receive the clarifications."
Note 1004815 - ER1 report - Corrections for Service tax and new layout
Hope this helps.
Please assign points as way to say thanks

Sales person in the service call report

Hello
I am using PLD to make a new layout for the service call report. I would like to add a column with the sales person of the customer. I have already added the field from the table, but i just get a blank column.
Does anyone know how I can do it?
Thanks
Jacobo

Hi Jacobo,
We cannot select the OSLP table in the list of tables available without using Alt+click. Please reconfirm if you have used this. Since OSLP is not available, you cannot include the Sales Employee column in the report.
One workaround is to set the sales employee name in one of the unused fields on the Service call form (like problem type, call type etc). Just rename and define the sales employees here as well. You can even use Formatted search to update this field for change in BP code.
Since this column is already available in the Service call reports, you can easily rename the columns and use the reports as-is without much customisation on PLD.
Hope this helps.
Regards,
Hamsa

POs without service entry-Report

Hai,
I have one requirements for service entry report.
my requirement is I need to take all POs without service entry.
I am taking records all from the table EKBE, but I dont know how to classify these records.
Is it based on fields(table EKBE) vgabe & vgabe?
Is the table EKBE correct?
Any tips?
With Regards,
Jaheer.

> 1) I have a contract Number, how to find the Service Entry sheet and P.O. number?
Go to ME2M select scope of list as RAHM, choose contract in the same screen put the required details execute
select the line item from contract go to release details there you can find the history
Also You can Check it in ME33K, Select the line item and go to item details. In quantity and price tab, you can see Target quantity and Released order quantity.
Selection Parameters Tab---->Press F4 from the drop down you can find list of parameters (WE102 & GUTSCHRIFT)
For PO-GR existing, use ME2N & WE102 combination for existing GR list, pls use ctrl+F8 for the selection field for this.
For PO-Invoice, use ME2N & GUTSCHRIFT combination for existing Invoice list ,
> 2) My user wants a to know how much payment company has made agaisnt the each line item of the service entry sheet. Please suggest me the T. code
This is FI reporting & not MM, but you can check this through T-code FBL1N.

Service tax reports

we are doing service tax and ed.cess on repairs and maintence invoices, after payment to vendors every month we have to take service tax report to submit authorities, is there any standard reports in this scenario
regards,

Hi
You can use FBL3N for the Service tax clearing GL account to have control on the availment of Service tax. After availing the credit, you need to clear the line items in the clearing account so that the net amount of service tax to be availed will be available in this GL account.
Regards,
Lakshmanan Krishnan

Pending Service PO report

Dear All,
please tell me report for Pending Service PO report.
Because in me2m,me2l,me2n To be del qty is zero though thers is pending qty in PO.
Thanks in advance.
Regadrs,
Gietsh

>
gitesh mahamuni wrote:
> Dear All,
>
> please tell me report for Pending Service PO report.
>
> Because in me2m,me2l,me2n To be del qty is zero though thers is pending qty in PO.
> Thanks in advance.
>
> Regadrs,
>
> Gietsh
In ME2n, scope of list ALLES, SELECTION PARAMETER = M-OFFEN, item category = D and then execute the report.

Layout Service Level Report

Hi together,
does anyone know, how to change the Layout of the Office-Document the Service Level Reports generated by the Solutionmanager? I know how to change the Fooder and Header, but what do I have to do to change e.g. the SAP Logo to the Logo of my company? Is it possible to change the Word Master Document?
Does anyone know?
Best regards
Thomas

Hello Thomas,
You can customize the SLR front page.
You can customize the header and footer, and since the SAP Logo is part of the report header, you should be able to replace it with your company logo. Please visit this link for more details [Customizing SLR FrontPage|https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000598892010E].
Please check the PDF at this location because I beleive it fully answers your question.
You should specifically look at "2.2 Customizing Step by Step - 2.2.2 General Settings - Coverpage".
Regards,
Paul

Create a service tax report

Dear sap Guru,
I want to create a service tax report and i am taking these table for creating this report -BKPF, RSEG,BSET, RBKP,LFA1 AND 1IMOVEND . can anybody tellme how to interlink these tables.
Thanks in advance
Manas

close the issue

Service Po Report.

Similar Messages

Maybe you are looking for