"service=STBY optional/Mandatory scope=BOTH"

Hi all,
I just want to know
when i give this command
alter system set log_archive_dest_2 ="service=STBY optional/Mandatory scope=BOTH";
i checked alert.log...it was giving error like host not found...as my standby db was not on...
then i think this scope=both, means its for SPfile also...
but when i restarted the machine then that error was not occuring again...
why this is happening...
then what is the use of spfile...?
what exactly it is made for?
is it necessory to to put my line INIT.ora..?
Thanx in advance...

Thanx Kuljeet!!
i havn't specified it in my INIT.ORA..
i'm just asking
when giving this "alter system.......................scope=both"
it remains in memory for a session or permenant?...
B'coz when i restarted my machine..there was no error in my alert.log...as it was showing, when i gave the above command.....the error was due to no availability of host..that i know...
but then what is the use of this command to give?
i mean if you have to create any permanent changes ...it has to have in INIT.ORA...
then what is the use of SPFILE?

Similar Messages

  • The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

    We are in the process of removing a child domain from the forest and are down to two DCs. These are both Server 2008r2 sp1 servers, one physical and virtual (PDC). When I try to remove a DC (not the PDC emulator) I get the following error:
    The operation failed because:
    Active Directory Domain Services could not transfer the remaining data in directory partition DC=DomainDnsZones,DC=mydomain,DC=local to
    Active Directory Domain Controller \\V-Svr03.mydomain.local.
    The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles."
    I have checked replication with repadmin /showrepl and all connections were successful. The dcdiag /test:kccEvent test on all servers passed.
    Most DCdiag tests are successful. The only failure is on NCSecDesc when running dcdiag /test:NCSecDesc
       Testing server: Default-First-Site\DC1-DEV-OFC
          Starting test: NCSecDesc
             Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
                Replicating Directory Changes In Filtered Set
             access rights for the naming context:
             DC=ForestDnsZones,DC=hookemup,DC=local
             ......................... DC1-DEV-OFC failed test NCSecDesc
    In researching this I find "If you do not plan to add an RODC to the forest, you can disregard this error."
    We have not successfully run ADprep /rodcPrep nor do we plan on having any Read-Only DCs, so I think we can ignor this error. We did try running ADprep /rodcPrep but got an LDAP error which I can duplicate if this is important.
    Schema and Naming FSMOs are on a DC higher in the forest. RID, PDC, and Infrastructure FSMOs for the child domain are on the Virtual server (PDC).
    Any guidance on where to go from here would be greatly appreciated as I have no more hair on my head to pull.

    Ok... I ran repadmin /showreps /v again and it shows no errors
    C:\>repadmin /showreps /v
    Default-First-Site\DC1-DEV-OFC
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: b294c59f-8b46-4133-89c5-0f30bfd49607
    DSA invocationID: 1054285d-cffe-42b4-8074-e2d44adbb151
    ==== INBOUND NEIGHBORS ======================================
    CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381490/OU, 16381490/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114817/OU, 114817/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66047/OU, 66047/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098197/OU, 8098197/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    CN=Schema,CN=Configuration,DC=mydomain,DC=local
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8097482/OU, 8097482/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 65239/OU, 65239/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114149/OU, 114149/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381373/OU, 16381373/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=ForestDnsZones,DC=mydomain,DC=local
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 66295/OU, 66295/PU
            Last attempt @ 2012-10-29 13:57:48 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 8098367/OU, 8098367/PU
            Last attempt @ 2012-10-29 13:58:13 was successful.
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 115032/OU, 115032/PU
            Last attempt @ 2012-10-29 13:58:25 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 16381653/OU, 16381653/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
    DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114871/OU, 114871/PU
            Last attempt @ 2012-10-29 13:54:02 was successful.
    DC=DomainDnsZones,DC=mySUBdomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS WRITEABLE
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
    DC=mydomain,DC=local
        Default-First-Site\V-SVR03 via RPC
            DSA object GUID: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8
            Address: 53018cc4-b8c9-48ce-9a54-1b987e7b08c8._msdcs.mydomain.local
            DSA invocationID: 45de2c10-ec8b-443d-a645-db4e0a352a23
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 114017/OU, 114017/PU
            Last attempt @ 2012-10-29 13:52:39 was successful.
        Default-First-Site\HESTIA via RPC
            DSA object GUID: b464fde9-29d7-4490-9582-fe9270050d50
            Address: b464fde9-29d7-4490-9582-fe9270050d50._msdcs.mydomain.local
            DSA invocationID: afea3845-9fa8-40a6-a477-84348a206348
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 16381614/OU, 16381614/PU
            Last attempt @ 2012-10-29 13:56:52 was successful.
        Default-First-Site\V-SVR01 via RPC
            DSA object GUID: e2f794eb-9658-4bad-b695-3d8c08f46371
            Address: e2f794eb-9658-4bad-b695-3d8c08f46371._msdcs.mydomain.local
            DSA invocationID: 07bb0fe9-bca9-46d1-92ce-308d36da478d
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 66325/OU, 66325/PU
            Last attempt @ 2012-10-29 13:58:34 was successful.
        Default-First-Site\ATHENA via RPC
            DSA object GUID: cb00a5b0-6dea-473c-bb42-19356dd9ed36
            Address: cb00a5b0-6dea-473c-bb42-19356dd9ed36._msdcs.mydomain.local
            DSA invocationID: 57313a9c-46a2-4b94-87cc-b3f91d54faed
            SYNC_ON_STARTUP DO_SCHEDULED_SYNCS
            USNs: 8098385/OU, 8098385/PU
            Last attempt @ 2012-10-29 13:58:38 was successful.

  • How to make Select Options Mandatory?

    Hi Guys,
                  Can anybnody tell me how to Declare  Selection Options for some of them mandatory.
    Select-Options : v_PurOrg for EKKO-EKORG default '2000',
                             v_GRDate for Sy-Datum ,
                             v_GRPrd  for MSEG-GJAHR.
             In these i have to make v_PurOrg Manadatory.
    Thanks,
    Gopi.

    Hi Gopi,
    In order to make select-options mandatory we add OBLIGATORY in the statement like the below.
    Selection-Screen.
    Select-Options : v_PurOrg for EKKO-EKORG default '2000' OBLIGATORY.
    In this case, only the first option will have the default value of 2000.But if you want both the options low and high of select-options, means you have to add the below code in your program in the initialization event.
    Initialization.
    v_PurOrg-low    =   1000. 
    v_PurOrg-high    =   2000. 
    append v_PurOrg.
    Hope this helps.
    Please reward if useful.
    Thanks,
    Srinivasa

  • What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

    What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
    These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

    DHCP Option 60:  Go HERE.

  • Can't find the "Protecting the RESTful Services" in the 'Required Scopes' field

    When I following the ORDS 2.0.10 readme to configure Oracle Restful services, I can't find the "Protecting the RESTful Services" in the ‘Required Scopes’ field.
    The detail step is in "Registering the 3rd party application" of section "Accessing the RESTful Services from a Third Party Application".
    "Choose Gallery Access in the ‘Required Scopes’ field."
    The above step I can't find any protected restful services.
    But I have configured the "Gallery Access" successfully before.
    Thanks,
    Marvin

    What is the version? Database Server
    RDBMS : 10.2.0.2.0
    Oracle Applications : 11.5.10.2
    Check the workflow for the OKS Contract Process item type and see which activity it is waiting at or errored out.How do I check. I am new. Do I have use sql query or in the form? What is the steps involved.
    You can use WF admin responsibility to check the status.Will a give a try.
    thanks
    siva

  • Use report history reporting services btn option

    hello,
    i'm trying to figure out what the use report history option on the general view of the reporting services button option provides.
    the definition in the help file is "To enable use of the report's history, select this option". i have no idea what this means, so i'm hoping that someone can tell me what this option provides.
    i don't have all of the requirements to test using the reporting services button, so i can't test it's functionality.
    any help would be greatly appreciated
    thank you
    tracy

    Hi KittyCat101,
    As per my understanding, you used case when statement in the query, you do not need to display permitsubtype in the report, but when you tried to delete permitsubtype from the query, it could not run correctly. In order to improve the efficiency of troubleshooting,
    I need to ask several questions:
    “I tried deleting the permitsubtype query and it would not run correctly.” As we can see, it has no effect to delete permitsubtype from the query you provided, could you please provide complete sql query for the report?
    Could you please provide detailed information about the report? I would be appreciated it if you could provide sample data and screenshot of the report.
    Please provide some more detailed information of your requirements.
    This may be a lot of information to ask for at one time. However, by collecting this information now, it will help us move more quickly toward a solution.
    Thanks,
    Wendy Fu

  • In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults.?

    In SMO there is any option for run both ExecuteNonQuery and ExecuteWithResults query at simultaneously?

    Hello,
    First, in a client session nothing can run "simultaneously", all statements are executed in sequence. And what should
    it be good for to run ExecuteNonQuery +
    ExecuteWithResults; both executes the SQL batch, the only difference is, ExecuteWithResults returns a result?
    But if you like, start one by one.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • "Service Advisor" option in CAM to try to collect support data ......

    I've tried using "Service Advisor" option in CAM to try to collect support data I get the error "The device has been unregistered from this application. Please close this service advisor window.".
    How to fix this?
    Thank you

    Hi.
    1. You can use command line for collect support data.
    /opt/SUNWsefms/bin/supportData -d <array_name> -p /tmp -o supportdata
    Result : /tmp/supportdata.zip
    2. For trubleshuting current problem, please show result of:
    cd /var/opt/SUNWsefms/store/Reports
    for i in report* cache*
    do
    echo $i
    perl -ane '/[^[:ascii:]]/ and print;' <  $i
    doneHow many arrays registered in the CAM ?
    Check that for this array work next point in CAM:
    -> Trubleshuting -> FRU
    -> Trubleshuting -> Events
    Regards.

  • Microsoft Online Services Authentication option disabled in the OData Data Source for SSIS

    I am attempting to use the new OData source for SQL Server 2012 (
    http://www.microsoft.com/en-us/download/details.aspx?id=42280)
    to access SharePoint Online data. I should be able to do so by selection the "Microsoft Online Services Authentication" option, but it seems to be disabled. Does anyone know how to enable it?
    Cheers
    John

    Hi John,
    Glad to hear that you have resolved the issue by yourself. Thank you for sharing your valuable blog.
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • How to lauch 'Toshiba services and Options'?

    When i try to Launch TOSHIBA Services and Options it launches a notepad file titled "index".
    How can i resolve this problem?
    Many thanks
    Robert Dawson

    Hi
    Seems you are a Satellite Pro A120 owner. Am I right?? I checked you another thread ;)
    Anyway, back to this posting. Im a little bit surprised and I wonder what Toshiba tools you mean????
    The TOSHIBA Services and Options are not known to me!!!
    Where did you find these tools or from where do you want to launch it???
    You can find most of the Toshiba tools and utilities in the Toshiba Assist.
    This is a reservoir for all preinstalled Tosh tools.
    But as far as I know there is nothing like TOSHIBA Services and Options

  • "Perform 1st-time configuration of Shared Services database" option disable

    Hi,
    Hyperion 11.1.2 shared services configuration “Perform 1st-time configuration of Shared Services database” option is disable
    I am going to do the configuration first time but Perform 1st-time configuration of Shared Services database” option is disabled.
    Please help here.
    Thanks
    Dharm

    Try starting the configurator from the command prompt with option -forceRegistry
    We were able to do it in v11.1.1.3... I think this can still be done with v11.1.2
    Thanks,
    Vijay

  • Alter system with scope=both

    Hi,
    I am trying to enable automatic log archiving at instance start up. I have tried to use the "scope=both" parameter to change both the current session and have it also update the spfile. I tried using this command:
    alter system archive log start to 'C:\oracle\ora92\database\dbname\archive' SCOPE=spfile;
    However it give me an error at the keyword SCOPE saying:
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    Any ideas on how to do this or do I have to export the spfile to a pfile, make the changes there and then create the pfile from the spfile ?
    Thanks in advance,
    Ned

    If I change to archivelog mode in Mount state using alter database archivelog;
    Will that also automatically set those parameter. Take 10g for example?
    By default the destination of archive log files are stored in flash recovery area without any additional configuration. In that case i also assume now that those parameter such as log_archive_start=true will also be automatically be set when the DB is set to archivelog mode (in reference of 10g).
    Correct me if i'm wrong...

  • Why my photobook in elements 10 does not give me the online services sizes options?

    I am using element 10 and my photobook does not give me the online service size options.It only give me the 8.5 x 11 local printing option. Does anyone know what can i do to get other size options?

    Not able to see it for PSE 12 too.I think online service sizes are off from Adobe side as Adobe controls these. Let`s wait for some time and check again.

  • WRT54G v5 firmware that contains service name option?

    I noticed there are some firmwares out there for WRT54G routers (maybe different versions 3 or 4 , etc) that do indeed have service name option added.
    However,  when I update my router to the latest firmware it doesnt have service name option. 
    Is it possible to add the service name option to version 5 WRT54G routers?
    thanks

    I don't think so that there is some service name provided with firmware version (either 3 or 4 ) on the linksys website .........the software is only a .bin format file ...........
    I will suggest you the router or the firmware version didnot require any service name ..........

  • TS1702 Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situat

    Upon switching on my ipad, I'm getting the caption "Unable to Download Application "*Solitaire" could not be downloaded at this time." Further, I'm getting 2 options - Done & Retry, both of which are not responding. The ipad is in the hanged situation for all practical purposes. How do I get out of this situation?

    Try a reset:
    1. Hold the Sleep and Home button down (together)
    2. For about 10 seconds
    3. Until you see the Apple logo (very important)
    4. Ignore the red slider

Maybe you are looking for

  • Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

    Hi Friends, I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error: My OS is Redhat Linux (64 bit). What's the issue? onfiguring the installer for this system's environment... awk: error while loa

  • Launch pad has question mark in icon and won't launch

    Hello, On my intel mac with lion the icon for launch pad has a question mark over it and wont launch. Also when I hit f4 it wont start launch pad. Any help would be appreciated.

  • MP4 stream not found

    I'm running AMS 5 on Windows Server 2012.  Some of my VOD MP4 videos play just fine, while others will not play and return a "stream not found" error in the player.  All videos were recorded in the same way. The videos that do play tend to be smaller

  • Can someone else track my iPhone?

    If someone has my iPhone mobile number, can they track where my iPhone is located? Or do they need to know the serial number and my account pass words? Thank you for your assistance in advance

  • Combining pdf files in Preview not saved

    I'm trying to combine screenshots into one pdf file.  I clicked on the side bar button and dragged the files I wanted into the side bar and then saved this as a pdf file.  It showed it as saving all the pages but when I closed it and reopened it, it