Service Tax Condition record - Table-3 and access sequence MWST

Dear All,
For maintaining the service tax conditon record , it is required to have the condition record to maintain under Tax classification table, which is available in access sequence MWST or we can add this condition table( table no :3) in any other access sequence and that access sequence needs to be assigned in Service tax condition type i.e JSRT, becasue system will check the rates from the table A003 while doing the service tax transfer from intermediate account to service tax account in report RFUMSV50.
But the issue in there is NO validity period defined in the condition table : 3 , which signifies that we can not maintain the service tax condition record along with the validity period.
Is there any way , we can add validity period field in Tax classification table.
and how can we see the maintainace of Taxes table , is there any T.code avaiable for the same, as I could't find the same.\
Please suggest.
Thanks & Regards
Nitin

Hi Nitin,
SD can give validity period for a tax code either for an individual customer or for all the customers through their pricing conditions.
Aravind

Similar Messages

  • Service tax Condition record

    Hi,
    I have maintained Service tax condition record for the combination of Vendor/Plant/Material group. If I create PO without Item category 'd',  system picking the condition record. But if i prepare with Item category 'd', system is not picking the condition record. What is the reason?
    Anyone have any clue??
    Regards,
    Sattuj

    Hi,
    Yes access sequence is there. I am using standard access sequence JTAX. Here i included new table vendor/plant/material group.
    How ever, then how system picks in po if the PO without item category 'd' ?
    Regards,
    Sattuj

  • Access sequency for Input Service Tax Condition

    Dear All,
    I am running the deferred tax transfer programme in ECC 6.0 but I am facing some problem with the Service Tax Conditions. Now existing we have configured for all input service tax conditions access sequence JTAX.
    If I use the MWST instead of JTAX...system does not calculate the Service Tax it gives error.So please provide me any solution or option for this....
    Regards,
    Sandeep

    Hi
    Maintain the Condition Record % at Tax code: FTXP
    Regards
    Prasanna R

  • Tax condition table for an access sequence

    Hi,
    I serched in the forums to find t.code or menu path for creating a tax condition table for MWST tax condition type, but no body has given any specific answer.  most of them have given the SD or MM related condition tables.
    My requirement is, I want to create a key combination for "MWST" TAX condition type.  Please let me know the process of creating the key combination for TAX condition type. 
    Thanks in advance.
    Anil

    Hi
    MWST is the standard progarm access sequence
    condition type  is base to calculation of main the tax procedure
    but the thing the access sequence and conition type are pure MM, SD Work,
    if you need to table :
    T685,T685A,T685T,
    are else you use Z table with the help of technical consultants'
    Thanks
    Madhu

  • Unable to Download Condition Tables and Access Sequences from R/3

    Hi Experts,
    We have a new set of condition tables and access sequences created in R/3. Now we need to download them to CRM, which we are unable to perform. We tried downloading DNL_CUST_CNDALL, but there is no use. The new condition tables are not getting pupulated. Moreover when I download this object, the corresponding CNCCRMPRCUS* table for the new condition type is not getting generated in CRM.
    The strange thing is the above mentioned tables when created in "development and quality" boxes are getting into respective CRM systems. We are using CRM 4.0.
    Your help will be appreciated.
    Regards,
    Ajay

    Hi Ajay
    Please check the transaction SLG1 which gives you very good inputs on the errors which would have happened during customizing or condition download
    Check the customizing download by giving the following parameters
    Object : cond_exchange
    Subobject :customizing
    Give the date on which the recent customizing download of DNL_CUST_CNDALL was performed.Check whether there are any errors!!if there are errors on then those needs to be corrected so that the new condition tables and access sequences get downloaded correctly to CRM.
    Thanks,
    Abishek

  • Retrieve the Purchase Order Condition Records Table

    Hallo!
    I have found this code right here:
    http://www.sap-basis-abap.com/sapab025.htm
    It is very useful particular for purposes which I need. Please can somebody
    try to fix the error to get it working. There is an internal table missing.
    Regards
    Ilhan
    Retrieve the Purchase Order Condition Records Table
    select * from ekko.
           select * from konv where knumv = ekko-knumv
               "Get all the condition records for the purchase order
           endselect.
    endselect.
    * Get the info record conditions record
    * First declare the record structure for the key
    data: begin of int_konp,
                 txt1(5),
                 lifnr(5),
                 matnr(18),
                 txt2(4),
                 txt3(1),
            end of int_konp.
    clear: konh, konp, int_konp.
    * data for the record key konh-vakey
    int_konp-txt1    = '00000'.
    int_konp-lifnr    = ekko-lifnr+5(5).
    int_konp-matnr = ekpo-matnr(18).
    int_konp-txt2    = 'ALL'.
    int_konp-werks = ekpo-werks.
    int_konp-txt3    = '0'.
    select * from konh where      kschl = 'PB00'            "Conditions (Header)
                                         and datab => p_datum.       "valid from date
          if konh-vakey = int_konp.                                  "Conditions (Item)
                 select single * from konp where knumh = konh-knumh.
                 continue.
          endif.
    endselect.

    Hi flora
    Just get through the sequence .
    see the table fields ...
    1. From EKKO table take an entry which is having pricing conditions.
    Now in the fields list check out for field EKKO-KNUMV(document condition number).
    2.Take this condition number and now goto table KONV.
    Give the document condition number in the field  KONV-KNUMV and execute .
    This will lead to a list of document condition numbers and some other fields .
    3.Now check for field KONV-KNUMH ,KONV-KAWRT(quantity) and note the value KONV-KWERT  .
    (Remember this is at header level).
    This is ur condition record number.
    **comments
    Now from document condition number we got the condition record number (KNUMH).
    4. now since u want the item level tax procedure go to table KONP and give the condition record number and execute .
    This will give u a list of details .
    Now concentrate on KONV-KAWRT (scale quantity) KONP-KBETR(rate) as this table will store “Pricing  per UNIT “ so product of these two will give u the total pricing tax, for a particular condition type say PR00  .
    For that particular condition item .
    Check the pricing procedure .
    See t-code VK13 and check the pricing procedure .
    From me23 check the same PO num select the item and check the pricing conditions applicable .
    Select a particular pricing and goto condition->analysis->analysis pricing  ,
    Better take help of a SD functional consultant in the process.
    regards,
    vijay.

  • Maintain tax condition records

    Hi,
    Right now we have option with combination of Plant/ Material group/ Vendor through T.code FV11. Can I add Short text as additional to this combination? if yes how?
    Regards,
    Sattuj

    If JIN1,JIN2 have access sequence MWST assigned, then why cant we maintain tax condition records for JIN1,JIN2?
    Ans: U can maintain Cond. Records in FV11 for JIN1 & JIN2 as they are PurChasing A/c recvables Cond. TYpes.
    2) What is the functionality of UTXJ ?
    Ans: It's a Tax Classification category and  it is also a cond. type for whcih v can maintain the conditin record.
    Its amt is the base on which the Sales Taxes r calculated.
    3)What is the link between Vat Condition types (Eg: JIN1,JIN2) and UTXJ (Which also holds the Tax code in condition record maintainance)?
    Ans: Thers no link between Jin1 & Jin2 and UTXJ as all three r sepately calculated on the NET Price including Discount.
    Hope this helps
    Rgds

  • Service Tax condition not picking during MIRO

    Hi,
    Referring earlier posted thread,
    http://forums.sdn.sap.com/thread.jspa?threadID=2135441&tstart=0
    I want to know insert a Tax Code - VAT for 10% and a Condition Type - Service Tax for 10.3%...
    During MIRO, Service Tax Amount is not Picking... Why???
    There is any solution for it.....

    Hi,
    If we create Service condition type, then why need to create Tax code in FTXP and maintain in FV11...
    Why both things need to create...??
    No need to maintain
    check for your service tax condition type
    Cond. class   A Discount or
    Calculat.type A percentage
    Cond.category B Delivery co
    and you have accrual tick for your condition in t-code M/06
    also check in your pricing procedure you have assign account key and accrual key for your condition type in t-code
    M/08
    Regards
    Kailas Ugale

  • Service tax condition types in Pricing Procedure in SD(Taxinn)

    I need one more advice on Service tax.
    I am configuring order type for services.In that in pricing I have to add the service tax conditions type for service tax & cess on that.We do not have any standard condition type in our pricing procedure for services.
    Is there any standard SAP doc. to configure service tax condition types in pricing procedure or I have to copy from JLST & JLSR(surcharge).What about the account keys I will used for these condition types.
    If you have any doc. related to this issue please send it to me....or suggest me what to do.
    Please remeber I am using TaxINN tax procedure.
    Please help me
    Thanks & Regards
    Sunil Garg

    PROCEDURE: Initial Steps
    Create two new Tax conditions: JSE4, JES4. Steps for creation of Tax Condition is illustrated below
    Create new condition types
    SAP Standard IMG -> Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Basic Settings -> Check Calculation Procedure. (Transaction OBYZ)
    Select ‘Define Condition Types’
    Select Condition Type JIN1 and Click on Copy as (F6) and give the Condition type as JSE4 and the Name as “Service Tax”.
    Select Condition Type JIN5 and Click on Copy as (F6) and give the Condition type as JES4 and the Name as “ECS on Service Tax”.
    Outcome: The two tax conditions, one for Service Tax and the second for Education Cess on Service Tax have now been created.
    1.     Create a new tax posting key VS9 and VS0. 
    The path for this is:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Basic Settings  Check and Change Settings for Tax Processing
    Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS9 and Name as ‘India Service Tax’.
    Select the Processing Key MW1 and Click on Copy as (F6) and give the Key as VS0 and Name as ‘ECS on Service Tax’.
    Note: If there are multiple service tax registration numbers, you need to have separate account posting to different GL accounts based on service registration number. This can be done provided a separate tax code is maintained for each service registration number.
    To achieve this you need to define a set of 2 separate G/L accounts for service tax and Education CESS on service tax respectively, for every service registration number.
    In such a case, please activate multiple accounts posting per tax code as follows:
    Defining the GL accounts for the Service tax and ECS on Service Tax:
    SPRO  Financial Accounting  Financial Accounting Global Settings  Tax on Sales/Purchases  Posting -> Define Tax accounts
    Go to Details of the Transaction VS9 (Service Tax GL account)  and enter the Chart of accounts…
    Select the Tax Code Check Box if you want to have Tax Code Specific GL accounts or Blank when the common GL accounts…
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Condition record table to pick printer

    Hi Friends,
    What is condition record table, based on this table how can i pick the printer? and how I can find this table? can any one help me its very urgent.
    Regards,
    DVNS.

    You can see the list of processed document through output types in the table NAST.
    Check the table TNAPR in SE16. It will have all the output condition records assigned through transaction NACE.
    You can find the output types in the field KSCHL of TNAPR table.

  • Service Tax condition types

    Which of the following Service Tax Condition tyes are to be used as per ECC 6:
    JSER
    JSVD
    or
    JSRT
    JEC3
    regards
    VS

    Hi,
    Please go through the below Notes for configuring the service tax.
    Master Note: 779512
    Configuration For MM & SD service tax. 778976.
    Configure as per the above note.
    Thanks & Regards,
    Sridhar

  • Deletion of tax condition records

    Hello,
    In Transaction VK32 (Change Condition Record) I have set the deletion flag on a tax condition record. The field helps says that the condition is deleted during the next reorganization run. Does anyone know what is meant by the "reorganization run" ie. what is the program name.
    Thank you,
    Regards,
    Jackie Jones

    You have to use the archiving programs, (tcode SARA).
    You can delete it only when all sales documents usign this record are archived.
    You can also change the settings in the conditions type (tcode V/05) so that you can phisically delete the condition when saving the deletion but this is not recomended by SAP.
    reward points if helpful
    Regards
    Roberto

  • Can one Condition type can have multiple access sequence?

    hi,
    Can one Condition type can have multiple access sequence?

    Hello,
    You can have one access sequence for condition type, but an access sequence can have more than one accesses.
    Prase

  • Different Tax condition records picked on sales order and invoice

    Dear Expert,
    I have a scenario where the goods supply from plant to different country sales organization customer. it is a n export order.
    . sales order has been processed with ship to address in Portugal. We did enter end user VATnumber on the ship to customer. When you look under conditions the MWST is 0.00 which means VAT will not be invoiced.
    while creating the order MWST condition calculated correctly by using the export access sequence, but when creating the invoice w r t sales order i am getting the domestic tax access sequence record.
    in my case it is wrong, the same sales order MWST condition amount needs to be copied to invoice as well.
    after going to condition tab of that billing document, select MWST and click on "Condition Record" I found below different values in sd order conditions and invoice conditions:
    invoice:
    SD-Order:
    Can you kindly help me on this? :-)
    Regards,
    Yashar

    Ideally, you should have a different pricing procedure for domestic and exports and I am not sure, why you have not created one more pricing procedure for exports.
    Coming to your query, it seems, the issue is VAT registration number in which case, have a look at the following notes:-
    Note  371764 - VAT registration number: Destination country
    Note 15244 - Incorrect VAT amount is displayed
    Note 148505 - VAT registrtn.no.fr.ship-to & n.fr.sold-to party
    G. Lakshmipathi

  • Regarding condition table and access sequence

    Dear SAP Gurus
    I have requirement as detailed below
    My taxation procedure is    TAXINN
    I have a new requirement is as detailed below
    for the Access Sequence JTAX --I wanted new  key combination as detailed below 
    Plant /Vendor/Tax code
    How to do this can any body will explain step by step procedure pls
    Points will be awareded ..
    Kindly clarify to me
    rgds
    Surya

    Hi  Suryaprakash,
        The Standard access sequence  " JTAX " , has only the key combination of tax classification with country code and tax code only. It is recommended for TAXXINN procedure.
       If you choose to go for the key combination of  " plant/vendor/taxcode " then there will be huge number of the resulting  total number of such combinations. Still if you want to create for the plant/vendor /taxcode combination , it is possible with combination.
    1.plant/vendor /material/taxcode
    2. plant/material group
    Thanks & Regards,
    Amjad

Maybe you are looking for