Services tab in netinfo manager emtpy

Hello,
I have just gotten a new core 2 duo mac book pro. And I am noticing that it will not mount other macs on my network. I also noticed that the services tab in netinfo manager is empty...which is unlike my desktop that I have.
Does anyone know a reason that would cause this?
macbook pro, core 2 duo, 2 GB RAM, 15 inch Mac OS X (10.4.8)

Hello Ping680,
If you look at the top of your NetInfo Manager window
you will see (i'm guessing) local @ localhost
-/. If you select /services you normally
don't see anything because you are not running any
web/server services. You are basically using the
wrong tool to check IP/network issues.
Network Utility is the item you want to use... but it
will not scan the network you must get the addresses
from the computers first.
Have you tried to Repair Permissions with Disk
Utility or any other troubleshooting steps?
Can you get out to the web?
I do see local @ localhost -/...but in my other mac computer (my desktop I select netinfo manager and it shows services.
I can get to the web...in fact I can ssh and ftp into other computers...but I cannot get the other file servers to mount...it keeps giving me this darn -35 error
I have repaired permissions and that does not help.

Similar Messages

Table control View in Maintenance order Services tab

Hi Experts,
I am trying to change the table control fields of the services tab of the maintenance order , when we use PM03 control key to generate services PR.
I try to remove some check box which are earlier defined as invisible to make it visible. However after saving the system variant system doesnt take the changes. It is coming back to the original .
Here are couple of fields I would like to change the setting. As of now I am trying to change the below mentioned field to visible . Presently it is in invisible mode.
Fields
Formula::ESLL-FORMELNR,
Form values: ESLL-FRMVAL1 to ESLL-FRMVAL5 and
User field3: ESLL-USERF1_TXT
program name SAPLMLSP
Control TC_VIEW
I am following the below. Kindly let me know whether I am following the right step.
1) Click on tbale setting
2) CLick on administrator
3) Select the field and do the necessary change to make visible or invisible.
4)Activate
5)Close
6) save.
RG
Vinod
Edited by: vnodpm on Feb 6, 2012 7:07 PM

Hi,
The IMG customizing will have greater priority than the screen table controls (also specific program logic can supersede the table controls). Check the customizing for service screen at following path:
SPRO - Materials Management - External Services Management - Define Screen Layout
-Paul

MAKING UNLIMITED INDICATOR AS GREY MODE IN SERVICE TAB OF SERVICE P.O

Dear cons
In service purchase order we want to make unlimited delivery indicator in a grey mode in service tab. I tried in screen layout of purchase order. In purchase order there are two field of unlimited indicator. One is available in delivery tab of p.o in item details screen. Another is also available in service tab of p.o in item details screen. When I made setting in screen layout at document level I saw the unlimited indicator became grey in DELIVERY TAB of the P.O. But my requirement is to make the setting in a grey mode in service tab of the p.o. how can I do it.Because we have created a ser. p.o of service of 10piece. but the user has activated unlimited indicator in service item . we want to make setting so that the system will not allow to activate the un limited indicator.pl. solve it.
nrk

Hi
Try this in external service management:
MM-> external service management -> define screen layout -> choose ME21-> copy it as ME21n (tcode) -> under quantity tab -> make Overfulfillment tolerance % & Overfulfillment tol. unlimited as hidden/ display.
So if you ME21n tcode then these fields will be hidden/ display.
Thanks

Change uid and home directory locations? - no more netinfo manager?

greetings,
just setting up my new MBpro with 10.5... i've discovered netinfo manager is no longer here... searched the discussion forum and have learned a little. i looked into the "directory utility", but don't see how to use it for configuring local user info... (seems to be primarily focused on network services, such as ldap)...
i keep 2 accounts on my computer - personal account for home use and work account for when i need to use my laptop for work. for my work account i need to set my UID to match that of our servers (suns)... i nfs mount suns, and access servers, etc. without the same UID, i don't have access to my network files when locally mounted... also i keep my home directories on a second partition and need to change the location of the home directory... all of these were relatively straight forward in netinfo manager.... but i have no idea where to access the configuration info that was in netinfo manager...
is there some kind of additional software i have to install?
i'd appreciate any suggestions-
thanks-

great! thanks!!
ps - besides the fact that i can get my own unique environments and keep my work life separate from my personal live on my home computer by making separate accounts, the 2nd account always gives me a way to test things and change things for an account without being logged into it... even if i didn't want to make a user account for my job on my personal computer, i'd still keep an alternate account for testing things and as a backdoor to fix problem in my primary account... i've always loved unix since i first started using it in 85... an i'm SO glad that apple made the switch to unix, albeit a little later than was good for them. i think it is undeniably better for the users, the administrators, and even apple... the mac is quite a joy to use these days, IMHO... (-;

NetInfo Manager in Leopard??

I am trying to follow some instructions from the Tecplot Support page to correct an error message that I am getting. The instructions call for me to make some changes using the NetInfo Manager Utility. This utility does not appear to be in Leopard. I need to duplicate and change some of the machine's information. How can I do this in Leopard.
If what I want to do is confusing, the instructions I am trying to follow are at the following link: http://www.tecplot.com/support/installation_database.asp?id=1355

Download and install the Server Admin Tools, and use that to make the changes; the Workgroup Manager can be found in /Applications/Server/. Use 127.0.0.1 as the server address as well as your administrator username and password, clicking on the third tab on the left side to see the network settings and duplicating the localhost entry by hand.
(26908)

User names list in netinfo manager

I have never used netinfo manager but today I opened it out of curiosity and clicked on users and found a enormous list of user names. Can anybody tell me why they are there? Is this a security issue?

Welcome to Apple Discussions!!
This is a list of the "System" users in 10.4. It is possible, depending on your installed software, to have others.
-2 nobody Unprivileged User
0 root System Administrator
1 daemon System Services
26 lp Printing Services
27 postfix Postfix User
423 openbase OpenBase
70 www World Wide Web Server
71 eppc Apple Events User
74 mysql MySQL Server
75 sshd sshd Privilege separation
76 qtss QuickTime Streaming Server
77 cyrusimap Cyrus IMAP User
78 mailman Mailman user
79 appserver Application Server
82 clamav Clamav User
83 amavisd Amavisd User
84 jabber Jabber User
85 xgridcontroller Xgrid Controller
86 xgridagent Xgrid Agent
87 appowner Application Owner
88 windowserver WindowServer
91 tokend Token Daemon
92 securityagent SecurityAgent
99 unknown Unknown User
Rather than being a security issue, these separate users actually contribute to enhancing the security of the system!

Cant find HP Web services tab to find claim code

Hi
I am trying to set up HP ePrint on my HP Laserjet M1522nf printer connected to my home network. I am unable to find the claim code for my printer to set up the device on HP connected services.
I have entered the IP address on my web browser and entered the printer's configuration tab but i am unable to find the web services tab or the print info page for the claim code.
Please let me know how to find the claim code so that i could set up ePrint.
Thanks
Harish
This question was solved.
View Solution.

Ok judt realised this device is not eprint ready.
Please ignore my earlier post.

HP LaserJet 600 M601 HP Web Services tab disappeared

Setup a new M601 yesterday. Networking and printing work fine, but when I would click on the "HP Web Services" tab and try to enable web services, it kept popping up an error and tell me to check proxy settings. No proxy. Installed the most recent firmware (2200643_22834) and logged back in. Networking and printing working fine. Now the "HP Web Services" tab is gone! Ran through the firmware update again, same result. Would try to access it by direct url, but I have no idea what it is.
Where can I get the original firmware?
Does someone know the URL so I can try to directly access the page, should look something like, https://192.168.x.x/hp/device/???
Any other ideas? Is there some sort of console command line access for this printer?
Thanks, hope someone can help with this.

Hi there
I hope you are doing well and I hope you do not mind a suggestion
Your M601 is a commercial product. I suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

CRM Related Questions for Configuring Service Desk in Solution Manager

Hi All,
We have 3 requirements while configuring service desk in solution manager:
1) Is there any possibility that we can restrict view of messages in solman for different teams. E.g: Finance Support team should not view message raised for Material Management Team ?
2) Is there any possibility in service desk that we can assign message on the basis of location e.g: message raised for finance from location A should go to different support team of finance and for location B, it should go to different finance team ?
3) Is there any possibility that we can make some question necessary while user is raising very high priority message from satellite system e.g: when we raise Very high priority message on service market place, we need to answer few mandatory questions ?
I tried to search these functionality in standard scenario but I am not able to find something relevant. Please suggest.
Thanks
Sunny

Hi Rama,
I Need to configure the feature to generate a ticket to SAP directly in VERY HIGH priority.
Could you please help me out into this. If you have any doc related to that Please send me.
Thanks in Advance!
Regards,
Prabhat Singh

Services tab in Service Purchase Order for Limit SC is not filled in

Hello All
As per the standard behaviour if a Free text SC is created for Services , the PO is created with one line item having description as " service item " and under the Services tab we can see the line items.
But when we create a SC from Limit for Services ( if we select Confirmation and Invoice ), The PO is created just like normal PO with item category as "D" and we do not see any line item in the Services tab in the PO.
Could you please let us know why this difference between Free text SC and for Limit SC.
Thanks in Advance.
Regards
Bharath Valleri

Hello Bharath,
What you describe is standard.
1- Limit SC
A limit item in SRM can give two kinds of R/3 PO items:
b- If you set "Invoice and confirmation" during Limit SC item creation, this means you will confirm your item, so R/3 PO item for service can only be created as category item "D",
Nevertheless, for your R3 PO item, you have populated an expected value (and you can fill in also an overall limit if check box "Unlimited" was not set at SC item creation).
That's why "Service" tab is empty. The "Limit" tab is populated in this case: confirmation will be done according to PO item expected value and not according to PO item quantity
a- If you set "Invoice only"during Limit SC item creation, this means confirmation is not allowed for you item, so R/3 PO item can only be created as item "B" (blanket). Blanket PO cannot be confirmed.
2- Free text SC
For a free text SC item with product type "Service", R/3 PO item will be a "D" category item.
"Service" tab is filled in with quantity and net price: confirmation will be done according PO item quantity.
So, main difference between Free text SC and Limit SC is quantity or expected value based confirmation.
Regards.
Laurent.

Actual quantity in service tab page becoming zero after updation

Dear friends,
We updated validity start date, end date in header and the field "form.val.2" in service tab page in item details of a service line item(item category D) in a Purchase order using the function module 'BAPI_PO_CHANGE'. After updation we observed the actual quantity (which denotes the total GR qty) becoming zero, making the PO completely open and allowing creation of service entry sheet for full quantity. This happend for so many POs. Now we want to correct the actual quantity. But as it is in display mode it now become difficult to change the actual quantity through any function module.
Seeking for a genuine solution about how to correct the actual quantity.
Regds
Amitava

hi
check this sap note 938498 BAPI_PO_CHANGE: Reference update for a service item

Error in tab of Portfolio Management

Hi All
I have a problem several users connect to the portal on the tab of Portfolio Management are presented with these messages:
Error connecting using JCO Client: null
No portfolio was found: Contact your system administrator
Error connecting using JCO Client: null
I reviewed if exist objects blocked in portal and users blocked in xrpm but nothing is blocked
Any suggestions on how this problem reslover?
Regards

Hi All for your answers
I changed the number max of connections of JCO, and to time I don't have any problems
Regards

Pull Service tab data from Contract to Purchase order

Hi All,
I Just want to know if is possible to pull service tab data from contract to purchase order. When i create PO w.r.t Service Contract the data from the service tab is not pulled. So need help on how can I pull.
Please help..
Thanks,
Ros

Hi if u r referring service contract maintain it in the line item (Outline agreement no). All the other details will copied from Contract.
Check it out
Regards,
Raman

Using NetInfo Manager to change GUID

Hello,
I recently became aware that you can change an active users guid with netinfo manager. Having done this on my own computer, I am now running into a problem where the users files are no longer owned by them, since the guid has changed. What is the correct method of changing the owner of only the users files to the "new" owner, so things such as a users desktop, preferences, and dock are not lost.
Thanks,
James

Hi
AD only - CUCM just reads in data from AD, it doesn't write back.
Aaron

Error Accessing Services tab in Portal Application.

Hi
I have successfully connected to Oracle UCM server from JDeveloper and Now I can see my folders and files that I have created in UCM from JDeveloper. But When I run the application and go to services tab It gives the following error. I have also enabled folder_g and disabled framework folder.
In popup
Messages for this page are listed below.
Could not retrieve members from policy store"
and Under services tab
The Documents service is unavailable.
Documents service is currently unavailable as there is no default content repository connection."
Thank you,
Muhammad Nasir

Hi,
You shouldn't use the response object directly
Instead, create a new HttpServletResponse reference from the componentRequest object.
Try using the following:
long length = file.length(); // where 'file' is a File() object of your sTITLE +".pdf" file
// Create the byte array to hold the data
byte[] bytes = new byte[(int)length];
int offset = 0;
int numRead = 0;
while (offset < bytes.length && (numRead=is.read(bytes, offset, bytes.length-offset)) >= 0) {
offset += numRead;
//The most important part:
HttpServletResponse res = componentRequest.getServletResponse(true);
res.setContentType("application/pdf");
res.addHeader("Content-Disposition", "attachment;filename=" + sTITLE +".pdf");
res.getOutputStream().write(bytes);

Services tab in netinfo manager emtpy

Similar Messages

Maybe you are looking for