Session handle is not valid in niDMM Configure Measurement Digits

I am trying to communicate to a NI-PXI4065 DMM and I am getting the error -1074130544 (niDMM Configure Measurement Digits.vi<ERR>The session handle is not valid) for some reason. Does it have to do with the instrument handle input going in the niDMM Configure Measurement Digits. vi or not?
I achieved the instrument handle after initializing the DMM with the niDMMIntialize.vi, so I believe the instrument handle that I am using is correct.
Thanks a lot to anyone who can help.

Hi Gjoraas,
I'm curious about how your assigning the instrument handle- you'll want to make sure that it matches the name in Measurement and Automation Explorer (that name will be found in Devices and Interfaces»DAQmx Devices- you'll want to use the name in quotations). Otherwise, is it possible that you are running two programs or projects that both use your DMM? If so, you'll want to try only running one program at a time. My last suggestion would be to reset the device in Measurement and Automation Explorer, by right-clicking on it and selecting 'reset device'. Hope this helps, let me know how it goes. Have a great day!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters

Similar Messages

Error in "niDMM Configure Measurement Digits.vi" - The session handle is not valid.

I get the error message below, when I run my LabVIEW program as an EXE, but no problem while running under LabVIEW development. Why is there any difference between the build EXE and the development environment (it uses the same VI's) and how can I debug this problem?
Running LabVIEW 2010 SP1.
Error message:
Error -1074130544 occurred at niDMM Configure Measurement Digits.vi
Possible reason(s):
The session handle is not valid.
TIA
Bent
Attachments:
ErrorMessage.png ‏7 KB

Dear All
I also got this problem while using GPIB to control my function generator(HP33120A).
Here's my error message
Mode.vi<ERR>Driver Status: (Hex 0xBFFA1190) The session handle is not valid.
And my code was from the modified example of driver as following:
please help me to figure it out. Thanks a lot!!

-1074130544 The session handle is not valid.

I am using LabView 2011 on Win7.
I am trying to work my way through the "Verification Procedure" part of the "NI PXI-4071 Calibration Procedure". Step 3 of the Verification Procedure states "Call the niDMM Reset VI." and displays Figure 1. The Device, NI PXI-4071, displays OK in NI-MAX (Figure 2) and works OK with the "NI DMM Soft Front Panel" program. When I run what I think is the correct code, the error -1074130544, "The session handle is not valid." is displayed. The BD and FP are shown in Figure 3.
Solved!
Go to Solution.
Attachments:
Figure 1.jpg ‏26 KB
Figure 2.jpg ‏91 KB
Figure 3.jpg ‏42 KB

Hi Ed,
If you want to call niDMM Reset, you will need to provide an instrument handle rather than an instrument descriptor.
To start a session to your DMM and generate an instrument handle that you can use with other NI-DMM functions, you will first need to call niDMM Initialize or niDMM Initialize with Options. You can wire the "Dev1" to the "Instrument Descriptor" pin and the function will return an instrument handle. You can then wire the "instrument handle out" pin to the "instrument handle" pin on the niDMM Reset VI. Whenever you initialize a session to an instrument, it is also good practice to close out the session by wiring the instrument handle to a niDMM Close function. The snippet of code below shows what I've described:
I also included a Simple Error Handler VI to report any errors that occur.
Also, it looks as if you are calling niDMM Reset with Defaults instead of niDMM Reset. If you haven't assigned any user-defined default values to your device's logical name then the two calls should be functionally equivalent.
If you make these changes you should no longer generate the error.
Good luck!
Regards,
Jared R.
Precision DC Product Support Engineer
National Instruments

Error - session handle nor valid for ivi

Hi All
I have posted this question in existing thread also I guess.
I am trying to control TDK lambda power supply through LabVIEW using IVI drivers.
logical name set in a MAX is same as what I am giving in VI to InitializeWithOptions.vi . However I am ending up with this error "IviDCPwr Initialize With Options.vi<ERR>
Primary Error: (Hex 0xBFFA1190) The session handle is not valid."
Not sure why this error is coming.
Can anyone help me with this error?

You might be using an IVI-COM driver and trying to use IVI-C Class driver VIs without having installed the IVI-COM adapters.
As mentioned in the knowledge base below The IVI-COM adapters are included with IVI Compliance Package 3.2 and later, but must be enabled in the installer's feature tree.
IVI-C Class Driver Support for IVI-COM Specific Drivers
http://digital.ni.com/public.nsf/allkb/5499F9DBD07522F686256F260066BA86?OpenDocument
duplicate post
http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/TDK-Lambda-Power-Supply-error/m-p/3118149#M68...

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Configure no. of session handled for same sql

hi, experts,
hi, if there is one report (only fire 1 sql by this report).
if only one internet explorer to run this report , it use 3 minutes to get it.
I use 3 internet explorers to run the same report but not running the report at the same time.
firstly, I run the report on first internet explorer.
then after 10 seconds, I run the report on 2nd internet explorer.
then after 10 seconds, I run the report on 3rd internet explorer.
after result on all internet explorer came, I check the sessions on the "Manage Sessions"
there are 2 sessions for same report.
How to configure no. of session handled for same sql on OBIEE?
thank you very much!

shipon_97 wrote:
Here I see that at a particular time of the database , the number of session from v$session is "271" where as the number of session in the "v$resource_limit" is "280" . Here I get some differ among these parameters .
Would anybody plz tell why the no of sessions differ between v$session and v$resource_limit parameters .
The v$session views shows current sessions (which change rapidly), while the v$resource_limit shows the maximum resource utilization, like a high-water mark.
http://download-east.oracle.com/docs/cd/A97630_01/server.920/a96536/ch3155.htm

"specified handle or index is not valid" on System.loadLibrary

Hi,
I have a WAS 6.40 installation on HPUX 11i. I am using a native method in one of the login modules I have made, but am getting the following error (stack trace shown below):
[Jan 11, 2005 11:33:27 AM - 10 - Err] java.lang.UnsatisfiedLinkError: /usr/lib/libJDecrypt.sl: specified handle or index is not valid.
[Jan 11, 2005 11:33:27 AM - 10 - Err] 0: java.lang.ClassLoader$NativeLibrary.load(Native Method)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 1: java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1611)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 2: java.lang.ClassLoader.loadLibrary(ClassLoader.java:1511)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 3: java.lang.Runtime.loadLibrary0(Runtime.java:795)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 4: java.lang.System.loadLibrary(System.java:834)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 5: com.netegrity.siteminder.sap.webas.util.JavaDecrypt.<clinit>(JavaDecrypt.java:56)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 6: com.netegrity.siteminder.sap.webas.jaas.SiteMinderLoginModule.<clinit>(SiteMinderLoginModule.java:146)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 7: sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 8: sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 9: sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 10: java.lang.reflect.Constructor.newInstance(Constructor.java:274)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 11: java.lang.Class.newInstance0(Class.java:308)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 12: java.lang.Class.newInstance(Class.java:261)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 13: com.sap.engine.services.security.login.LoginContextFactory.initializeLoginContext(LoginContextFactory.java:160)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 14: com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:127)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 15: com.sap.engine.services.servlets_jsp.server.runtime.context.SessionServletContext.doLogin(SessionServletContext.java:619)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 16: com.sap.engine.services.servlets_jsp.server.runtime.context.SessionServletContext.checkUser(SessionServletContext.java:294)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 17: com.sap.engine.services.servlets_jsp.server.runtime.context.ApplicationContext.checkMap(ApplicationContext.java:403)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 18: com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.checkRequest(HttpHandlerImpl.java:67)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 19: com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:780)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 20: com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 21: com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 22: com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 23: com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 24: com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 25: com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 26: java.security.AccessController.doPrivileged(Native Method)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 27: com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
[Jan 11, 2005 11:33:27 AM - 10 - Err] 28: com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Strangely when I try to load the .sl library from a test application outside WAS it loads perfectly. Have tested a similar DLL on a WAS setup on Windows. It works fine there.
regards,
Vishal

Hi Markus,
Thanks for pointing out the problem. I was suspecting the same too.
Unfortunately we are also using some third party libraries, which happen to be 32-bit. Would need a workaround somehow.
Could you mention the location from where u got the info regarding PAM on HPUX? As in where is it documented etc.?
regards,
Vishal

Re: [iPlanet-JATO] Re: session timeout when not submitting to a handler

Mark--
I know what's happening here, but am curious about your approach. You said
in an earlier email that you were generating links directly to JSPs, but
from what you are describing, you are generating JATO-style links to access
JATO pages. Nothing wrong with that, but there is a signficant difference.
Actually, it just occurred to me, I'm wondering what your URLs look like.
The way the request dispatching works in JATO is it ignores anything after
an initial "." in the final part of the URL path. For example, a request
for "/myapp/module1/MyPage.jsp" doesn't actually try to hit the JSP, instead
it tries to hit the JATO page "/myapp/module1/MyPage".
The end result is that you may think you are accessing a JSP directly, but
are instead accessing a JATO page. The reason the request dispatching works
this way is because it is illegal to access JATO JSPs directly, and there is
actually a (disabled) JATO feature that piggybacks on the use of the
dot-delimited URL.
So, now I need to understand your intent. I wasn't really sure why you were
generating direct JSP/page links to begin with. This works against the Type
II architecture JATO uses, in which all JATO requests go back to the
controller servlet.
If you are trying to design something like a menu page, you may have thought
that it was burdensome to create a number of HREF children, plus implement
event handlers for each of them. This definitely would be burdensome beyond
just a handful of links, but this is why JATO provides other mechanisms for
doing what I'll call here "polymorphic HREFs".
Assuming this menu page scenario, the easiest thing to do is to simply use
one HREF child on the page, and add a value to it each time it is rendered
that distinguishes it from the other instances on the page. In your event
handler for the HREF, you simply check this value and use it to decide which
page to forward to. You can add a value to an HREF or Button by using the
"addExtraValue()" method. Or, if you are using JATO 1.2, you can add extra
query string NVPs right in the JSP document using the "queryParams"
attribute of the <jato:href> tag. Thus, your one HREFchild and event
handler become "polymorphic" because what they do depends on the context in
which they are invoked.
Now, I still don't have confirmation that this is what you were trying to
do, so until I do, let me explain the exception you're seeing. JATO assumes
that when a request comes in for a page that includes the pageAttributes
NVP, it is a request coming from a previously generated JATO page. Because
of the way JATO works, this means that the request dispatching code should
send the request back to the originally rendered page. For example, if Page
A renders an HREF, which the user then activates, JATO sends the request
back to Page A for handling. All of the HREFs and forms generated during
rendering of Page A actually refer back to Page A, regardless of where those
links or buttons actually pass the request in their event handlers/Command
objects.
So, what's happening when you include the pageAttributes in your HREFs is
that JATO is assuming that a request is being sent to the target page, with
the assumption that the target page has a mechanism in place to handle the
request. This assumption relies on the specification of the "originator" of
the request being specified in the request. For links/HREFs, the name and
value of the HREF is sent along with the request. For forms, the name and
value of the button that was pressed are sent in the request. JATO uses the
presence of these name/value pairs to decide which event handler, or which
Command object, to invoke to handle the request.
The exception you are receiving is saying that there was no object on the
target page that indicated it could handle the request. This is to be
expected, since you have not specified a query parameter that indicates
which CommandField child is responsible the request. However, this is where
I see the disconnect, because that is not what I believe you were trying to
do (as explained above).
So now, given all the information above, can you tell me what you're trying
to accomplish, and whether or not the info I've given you has helped you to
design a mechanism more in line with a JATO approach? If not, given that I
understand what you're trying to do, I can offer a more concrete solution.
Todd
----- Original Message -----
From: <Mark_Dubinsky@p...>
Sent: Monday, November 05, 2001 2:54 PM
Subject: [iPlanet-JATO] Re: session timeout when not submitting to a handler
This is the exception we get:
(And BTW, leaving a blank value for the pageAttributes doesn't help)
[05/Nov/2001 17:49:18:4] error: <portalServlet.processRequest>
javax.servlet.ServletException: The request was not be handled by the
specified handler
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at
javax.servlet.ServletException.<init>(ServletException.java:107)
at
com.putnaminvestments.common.jato.ApplicationServletBase.dispatchRequ
est(Compiled Code)
at
com.putnaminvestments.common.jato.ApplicationServletBase.processReque
st(Compiled Code)
at
com.putnaminvestments.bp.portal.portalServlet.processRequest(Compiled
Code)
at
com.putnaminvestments.common.jato.ApplicationServletBase.doPost(Compi
led Code)
at
com.putnaminvestments.common.jato.ApplicationServletBase.doGet(Compil
ed Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.putnaminvestments.bp.bpServletBase.service(Compiled
Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at
com.netscape.server.servlet.servletrunner.ServletInfo.service(Compile
d Code)
at
com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compi
led Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Mark--
Initially we tried to add the pageAttributes NVP as well, but that
was
causing an exception, so we stopped doing that.That's odd--what was the exception?
Our problem now is that when the SessionTimes out it does not go
to
onSessionTimeout method as in processRequestMethod of the
ApplicationServletBase it looks for pageAttributes. If it is notnull
then only onSessionTimeOut method is called.This is sadly the only technique for determining if a session hastimed out
and a new one been created, versus the initial creation of thesession.
Is there any work around for this? Maybe you can suggest how topass
the pageAttributes without causing the initial exception?Definitely--let me know what the exception was and I'll be able tosuggest
something. However, it shouldn't really be any harder thanappending a
"jato.pageAttributes=" empty NVP on the HREF.
Todd
Todd Fast
Senior Engineer
Sun/Netscape Alliance
todd.fast@s...
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

OK, here's what I'm trying to do: We have, like you said, a menu
page. The pages that it goes to and the number of links are all
variable and read from the database. In NetD we were able to create
URLs in the form
pgXYZ?SPIDERSESSION=abcd
so this is what I'm trying to replicate here. So the URL that works
is
pgContactUs?GXHC_GX_jst=fc7b7e61662d6164&GXHC_gx_session_id_=cc9c6dfa5
601afa7
which I interpreted to be the equivalent of the old Netd way. Our
javascript also loads other frames of the page in the same manner.
And I believe the URL-rewritten frame sources of a frameset look like
this too.
This all worked except for the timeout problem. In theory we could
rewrite all URLs to go to a handler, but that would be...
inconvenient.

Handle not valid for open spool request

Hello everyone,
i am facing an error while clicking the print preview option in change PO (me22n).
i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
now, when i save and click print preview button i get an error as
"Handle not valid for open spool request"
Kindly give me some idea how to tackle this.
Thanks
gaurav

Gaurav,
I am having a similar issue and would appreciate if you could let us know how your problem was solved?
What control parameters did you change to make this work?
Thanks,
Jay

Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured

Today I tried to configure JAVA APM on a CentOS 6.4 server with tomcat6 installed through the normal RPM package. Adding this server to SCOM was no problem and it shows itself as a 'Deep Monitored Configuration'. The last part of enabling
JAVA APM fails. I have followed the following process:
1. Imported the JAVA APM MP's
2. Extracted the JAVA APM Files
3. Copied those files to my CentOS server
4. Added the JAVA_OPTS to my tomcat configuration file
5. Restarted Tomcat
When I look for the log file which needs to be created through the installation of the APM agent it cannot be find. When I look into my Catalina.out file I see the following errors:
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
com.microsoft.ManagementServices.APMAgent.Exception.ApmException: SEAgent.config.xml does not have a valid event sender configured
        at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
        at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
        ... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.AgentThreadManager.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
        at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
        ... 15 more
Caused by: com.microsoft.ManagementServices.APMAgent.Exception.ApmException: Error registering MBean: com.microsoft.ManagementServices.APMAgent:type=COUNTER
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.registerMetricMBeans(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.EventSender.MBeanEventLog.<init>(Unknown Source)
        ... 19 more
Mar 05, 2014 7:05:16 PM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
java.lang.reflect.InvocationTargetException
        at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
        at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)
        at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
        at java.lang.reflect.Constructor.newInstance(Constructor.java:525)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.AgentContextLoader.loadContext(Unknown Source)
        at com.microsoft.ManagementServices.APMAgent.Agent.Startup.Agent.premain(Unknown Source)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at sun.instrument.InstrumentationImpl.loadClassAndStartAgent(InstrumentationImpl.java:382)
        at sun.instrument.InstrumentationImpl.loadClassAndCallPremain(InstrumentationImpl.java:397)
Caused by: java.lang.InstantiationException: Monitor initialization failed: SEAgent.config.xml does not have a valid event sender configured
        at com.microsoft.ManagementServices.APMAgent.Agent.Monitor.AgentContext.<init>(Unknown Source)
        ... 12 more
Does anyone have seen this error before? Can someone help me with this one?
Thnx,

I'm running tomcat on a CentOS release 6.4 (Final) server. I installed Tomcat 6 through an RPM from the CentOS sources. I have installed Apache Tomcat/6.0.24 wit JVM version 1.7.0_09-icedtea-mockbuild_2013_01_16_18_52-b00, the JVM Vendor is Oracle Corporation.
My tomcat configuration needs to be done in '/etc/tomcat6/tomcat6.conf'
I installed the APM Agent in the path '/opt/apm/' with the rights 40755 (root/root). The files have the following rights:
-rw-rw-r-- 1 root tomcat 32046 Mar 3 15:38 apm_facade.jar
-rw-rw-r-- 1 root tomcat 244819 Mar 3 15:38 apm_monitor.jar
-rw-rw-r-- 1 root tomcat 38110 Mar 3 15:38 apm_producers.jar
-rw-rw-r-- 1 root tomcat 207006 Mar 3 15:38 asm-all-3.3.1.jar
-rw-rw-r-- 1 root tomcat   4157 Mar 3 15:38 ASM_Third_Party_Notices.txt
-rw-rw-r-- 1 root tomcat 241368 Mar 3 15:38 DispatcherStub.dll
-rw-rw-r-- 1 root tomcat 36880 Mar 3 15:38 pmonitor.config.xml
-rw-rw-r-- 1 root tomcat   2625 Mar 3 15:38 SEAgent.config.xml
-rw-rw-r-- 1 root tomcat    830 Mar 5 15:19 Starter.properties
The above rights are equal to the /etc/tomcat6 directory with the tomcat configuration files.
In the tomcat6.conf I have added the following entries:
#Microsoft SCOM APM
JAVA_OPTS="${JAVA_OPTS} -Djava.library.path=/opt/apm"
JAVA_OPTS="${JAVA_OPTS} -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar"
When I look into the running tomcat process I see the following:
tomcat   17401     1 0 Mar05 ?        00:00:39 /usr/lib/jvm/jre/bin/java -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar
-Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory -Djava.library.path=/opt/apm -javaagent:/opt/apm/apm_facade.jar -Xbootclasspath/p:/opt/apm/apm_producers.jar -Xbootclasspath/p:/opt/apm/apm_facade.jar -Djavax.sql.DataSource.Factory=org.apache.commons.dbcp.BasicDataSourceFactory
-classpath :/usr/share/tomcat6/bin/bootstrap.jar:/usr/share/tomcat6/bin/tomcat-juli.jar:/usr/share/java/commons-daemon.jar -Dcatalina.base=/usr/share/tomcat6 -Dcatalina.home=/usr/share/tomcat6 -Djava.endorsed.dirs= -Djava.io.tmpdir=/var/cache/tomcat6/temp
-Djava.util.logging.config.file=/usr/share/tomcat6/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager org.apache.catalina.startup.Bootstrap start
My Starter.Properties looks like this:
# Jars to load by inner classloader.
# Use semicolons to separate the JAR entries
ClassPath=apm_monitor.jar;asm-all-3.3.1.jar;apm_producers.jar
# Path to pmonitor.config
MonitorConfigFileName=pmonitor.config.xml
# Path to SEAgent.config
AgentConfigFileName=SEAgent.config.xml
# Log file name
# Example for full-path location:
#                  LogFileName=c:\\tracelog\\apm-java-agent.log
# Example for relative path (to agent jar files):
#                  LogFileName=apm-java-agent.log
LogFileName=apm-java-agent.log
# Log level (SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST)
# A level of FINER or FINEST may expose Personally identifiable
# information (PII) in the log file. The levels below INFO are
# intended for debugging and diagnostic use only.
LogLevel=FINEST
The 'apm-java-agent.log' is not created on the system. The only logging is done in the catalina.out. When restarting tomcat I see the following entries in te log file:
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading succeeded (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Initializing Java APM Agent (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger warning
WARNING: Failed registering the COUNTER MBean
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger error
SEVERE: Java APM Agent initialization failed: SEAgent.config.xml does not have a valid event sender configured
Mar 06, 2014 9:35:21 AM com.microsoft.ManagementServices.APMAgent.Log.SystemLogger info
INFO: Java APM Agent loading failed (Build: 1.10.100.15, Label: NotFromLabel, BuildDate: 20131112)
Hope this gives your some more background around my problem, I double checked the permissions..

My One to One activation code said it is not valid. How do I fix this so I can sign up for my first session?

My One to One activation code said it is not valid. How do I fix this so I can sign up for my first session?

Thanks JoeyR. I didn't realize the One to One sessions are now online.
The "activation code" threw me. I took the One to One classes 4 years ago. All I did was sign up in the store and the sessions started the following week inside the Apple Store. Times have changed I see.

F400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.

Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
Aswini

Hi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
    <States>
      <State type="Proposed" value="New" />
      <State type="Proposed" value="Approved" />
      <State type="InProgress" value="Committed" />
      <State type="Complete" value="Closed" />
    </States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
    <AddPanel>
      <Fields>
<Field refname="System.Title" />
      </Fields>
    </AddPanel>
    <Columns>
      <Column width="100" refname="System.WorkItemType" />
      <Column width="400" refname="System.Title" />
      <Column width="100" refname="System.State" />
      <Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
      <Column width="200" refname="System.IterationPath" />
      <Column width="200" refname="System.Tags" />
    </Columns>
    <States>
      <State type="Proposed" value="New" />
      <State type="Proposed" value="Approved" />
      <State type="InProgress" value="Committed" />
      <State type="Complete" value="Closed" />
      <State type="Complete" value="Done" />
    </States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

'MAPI Session Handle' of the NGW 'Object Request Broker' could not be accessed (0x80004005) on attempt to get an address book

Hi!
When I try to access GW address book by calling
DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or even
DIGWMessage::Send, I'm getting messagebox with title "Address Book Error"
and message: "The 'MAPI Session Handle' of the Novell GroupWise 'Object
Request Broker' could not be accesses. The address book cannot run (error:
status: 0x80004005)."
I'm using .NET and I only get this error when I create a console
application. With windows application everything goes fine.
I've tried reinstalling GW client, running fixmapi utility, installing
different versions of MAPI CDO, but still got this problem.
Any ideas?

In the Application object.
>>> On Monday, July 26, 2010 at 4:16 PM,
shutchinson<[email protected]> wrote:
> Where would we set this?
>
> Thanks!
>
> Scott
>
> Preston Stephenson;1755943 Wrote:
>> Do you need to use the MAPI address book providers?
>> Can you use MultiLogin and set MultiLoginAddressBookSupport = TRUE?
>>
>> Preston
>>
>> >>> On Tuesday, November 11, 2008 at 4:22 AM, Vladimir
>> Iofik<[email protected]>
>> wrote:
>> > Hi!
>> > When I try to access GW address book by calling
>> > DIGWAccount6::GetSystemAddressBook, or DIGWAccount6::AddressBooks, or
>> even
>>
>> > DIGWMessage::Send, I'm getting messagebox with title "Address Book
>> Error"
>>
>> > and message: "The 'MAPI Session Handle' of the Novell GroupWise
>> 'Object
>> > Request Broker' could not be accesses. The address book cannot run
>> (error:
>>
>> > status: 0x80004005)."
>> > I'm using .NET and I only get this error when I create a console
>> > application. With windows application everything goes fine.
>> > I've tried reinstalling GW client, running fixmapi utility,
>> installing
>> > different versions of MAPI CDO, but still got this problem.
>> >
>> > Any ideas?

Help ! Anxious !---The session is not valid; it may have expired.

Caused by: com.sap.mdm.internal.protocol.manual.ServerException: The session is not valid; it may have expired. Create a
new session and try the operation again.
at com.sap.mdm.internal.protocol.manual.AbstractProtocolCommand.execute(AbstractProtocolCommand.java:114)
at com.sap.mdm.data.commands.AbstractRetrieveLimitedRecordsCommand.execute
(AbstractRetrieveLimitedRecordsCommand.java:173)
i don't know why,if a session can do many command at the meantime! thank you every

Hi,
You might have kept your session idle for long time thats why it has got expired. Also check the Inactive Client Time Out in minutes property in MDS.ini and set it some value depending on your requirement.
Regards,
Jitesh Talreja

Erreur -1074130544 : Le handle de session n'est pas valide.

Bonjour tout le monde,
J'ai un petit programme tiré d'un exemple (très simple) qui me permet de faire l'acquisition d'un signal sur une entrée de ma carte d'acquisition.
Sauf que dans mon projet, j'ai besoin d'utiliser plusieurs entrée ! (j'en ai 8 au total sur ma carte).
J'ai donc re-créé le même programme juste en dessou de mon 1er (voila une capture d'écran : http://img130.imageshack.us/img130/4963/programmedoublquinemarc.png), et la quand je lance l'éxécution, voila l'erreur qu'il me dit :
"L'erreur -1074130544 s'est produite à : Nœud de propriété (arg 1) dans niScope Read Cluster.vi:2->NOM_DE_MON_PROJET.vi
Raisons possibles :
IVI: (Hex 0xBFFA1190) Le handle de session n'est pas valide."
Donc à priori, il n'aime pas le fais d'avoir deux programmes identiques non ?
Quel est mon erreur ? Comment faire pour réaliser l'acquisition en même temps de plusieurs signaux (sachant que ma carte est faite pour celà) ?
Je vous remercie d'avance.
PS : Je travaille sur LabView 8.5.
Résolu !
Accéder à la solution.

Bonjour et merci de votre réponse,
C'est pourtant ce que j'ai fais non ? (Voir VI en pièce jointe ou l'impr écran)
lI n'y a donc pas moyen d'éviter ce "décalage" dont je parle plus haut ?
Pièces jointes :
Panel_OK.vi ‏353 KB
Panel_OK impr écran.PNG ‏31 KB

Session handle is not valid in niDMM Configure Measurement Digits

Similar Messages

Maybe you are looking for