Session management error: Authentication Rejected error

Please help me with this error I get when trying to build qdvdauthor:
/opt/qt/bin/uic qplayer/engines/dialogqxinesetup.ui -o .ui/dialogqxinesetup.h
Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
the xhost + command does not help and ...
the command: xhost +localhost gives me the following message:
xhost: bad hostname "localhost"
Thank you

br4 wrote:
no
in /etc/rc.conf
# NETWORKING
HOSTNAME="myhost"
and /etc/hosts is 127.0.0.1
i use dhcp . so should i change the /etc/rc.conf ?
At least something worked! FYI, I use dhcp as well and here are the relevant parts of my /etc/rc.conf
# NETWORKING
HOSTNAME="darkstar"
and /etc/hosts
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost darkstar

Similar Messages

Session management problems with SSO

Hi all-
I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
Thanks
Rob

Hi Scott-
Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
Apex version = 3.0.1.00.08
SSO SDK = ssosdk902.zip
I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
Login URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
Home URL: http://apex_host/pls/apex
Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
Logout URL: http://apex_host/pls/apex
RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
create package YOUR_PACKAGE as
procedure process_success(urlc in varchar2);
end YOUR_PACKAGE;
CREATE PACKAGE BODY YOUR_PACKAGE AS
procedure process_success(urlc in varchar2) as
begin
wwv_flow_custom_auth_sso.process_success(
urlc=>urlc,
p_partner_app_name=>'MY_PARTNER_NAME');
end process_success;
END YOUR_PACKAGE;
Anything look obviously wrong to you?
Thanks!
Rob

GnomeUI-WARNING While connecting to session manager:Authentication Rejected

Hi:
I was running Oracle eBusiness Suite R1211 on Enterprise Linux 5.3.
When I try to run HelloWorld on OA Framework tutorial I got the following error
(Gecko:6415): GnomeUI-WARNING **: While connecting to session manager: Authentication Rejected
Does any one has idea how to resolve the problem?
Please help
sem

Check the DBC file is updated one & are the connection is working or not.
Thanks
--Anil

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

JMF error - Format of Stream not supported in RTP Session Manager

java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
why this erro occors?
I already created the DataSink.
When I try to do this...
dsk.open(); //here the error got
dsk.start(); Code of server of media
I want to sent audio (wav) like a radio, but from file. Without stop to send streaming. PullBufered
*Class Server that you offers Streaming of midia
public class Servidor {
private MediaLocator ml;
private Processor pro;
private javax.media.protocol.DataSource ds;
private DataSink dsk;
private boolean codificado = false;
//start the server service, passing the adress of media
// ex: d:\music\music.wav
// pass the ip and port, to make a server works
public void iniciarServicoServidor(String end,String ip, int porta)
try {
//capture media
capturarMidia(end);
//creates processor
criarProcessor();
// configure the processor
configurarProcessor();
//setContent RAW
descreverConteudoEnviado();
//format the media in right RTP format
formatRTP();
//creat the streaming
criarStreaming();
//configure the server
configurarServidor(ip, porta);
//in this method raise the excepition
iniciarServidor();
//when I try to open the DataSink.open() raises the exception
//java.io.IOException: Format of Stream not supported in RTP Session //Manager
// at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
} catch (RuntimeException e) {
System.out.println("Houve um erro em iniciarServicoServidor");
e.printStackTrace();
public void capturarMidia(String endereco)
try {
System.out.println("**************************************************************");
System.out.println("Iniciando processo de servidor de multimidia em " + Calendar.getInstance().getTime().toString());
ml = new MediaLocator("file:///" + endereco);
System.out.println("Midia realizada com sucesso.");
System.out.println ("[" + "file:///" + endereco +"]");
} catch (RuntimeException e) {
System.out.println("Houve um erro em capturarMidia");
e.printStackTrace ();
public void criarProcessor()
try {
System.out.println("**************************************************************");
pro = Manager.createProcessor(ml);
System.out.println("Processor criado com sucesso.");
System.out.println("Midia com durcao:" + pro.getDuration().getSeconds());
} catch (NoProcessorException e) {
System.out.println("Houve um erro em criarProcessor");
e.printStackTrace();
} catch (IOException e) {
System.out.println ("Houve um erro em criarProcessor");
e.printStackTrace();
public void configurarProcessor()
try {
System.out.println("**************************************************************");
System.out.println("Processor em estado de configura��o.");
pro.configure();
System.out.println("Processor configurado.");
} catch (RuntimeException e) {
System.out.println("Houve um erro em configurarProcessor");
e.printStackTrace();
public void descreverConteudoEnviado()
try {
System.out.println("**************************************************************");
pro.setContentDescriptor(new ContentDescriptor(ContentDescriptor.RAW));
System.out.println("Descritor de conteudo:" + pro.getContentDescriptor().toString());
} catch (NotConfiguredError e) {
System.out.println("Houve um erro em descreverConteudoEnviado");
e.printStackTrace();
private Format checkForVideoSizes(Format original, Format supported) {
int width, height;
Dimension size = ((VideoFormat)original).getSize();
Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
Format h263Fmt = new Format(VideoFormat.H263_RTP);
if (supported.matches(jpegFmt)) {
// For JPEG, make sure width and height are divisible by 8.
width = (size.width % 8 == 0 ? size.width :
(int)(size.width / 8) * 8);
height = (size.height % 8 == 0 ? size.height :
(int)(size.height / 8) * 8);
} else if (supported.matches(h263Fmt)) {
// For H.263, we only support some specific sizes.
if (size.width < 128) {
width = 128;
height = 96;
} else if ( size.width < 176) {
width = 176;
height = 144;
} else {
width = 352;
height = 288;
} else {
// We don't know this particular format. We'll just
// leave it alone then.
return supported;
return (new VideoFormat(null,
new Dimension(width, height),
Format.NOT_SPECIFIED ,
null,
Format.NOT_SPECIFIED)).intersects(supported);
public void formatRTP()
try {
// Program the tracks.
TrackControl tracks[] = pro.getTrackControls();
Format supported[];
Format chosen;
for (int i = 0; i < tracks.length; i++) {
Format format = tracks.getFormat();
if (tracks[i].isEnabled()) {
supported = tracks[i].getSupportedFormats();
// We've set the output content to the RAW_RTP.
// So all the supported formats should work with RTP.
// We'll just pick the first one.
if (supported.length > 0) {
if (supported[0] instanceof VideoFormat) {
// For video formats, we should double check the
// sizes since not all formats work in all sizes.
chosen = checkForVideoSizes(tracks[i].getFormat(),
supported[0]);
} else
chosen = supported[0];
tracks[i].setFormat(chosen);
System.err.println("Track " + i + " is set to transmit as:");
System.err.println(" " + chosen);
codificado = true;
} else
tracks[i].setEnabled(false);
} else
tracks[i].setEnabled(false);
} catch (RuntimeException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public void tocar()
pro.start();
public void criarStreaming()
try {
System.out.println("**************************************************************");
if (codificado)
System.out.println("Midia codificada...");
System.out.println("Processor entra em estado de realize.");
pro.realize();
System.out.println("Processor realized.");
System.out.println("Adquirindo o streaming a ser enviado.");
ds = pro.getDataOutput();
System.out.println("Streaming adquirido pronto a ser enviado.");
} catch (NotRealizedError e) {
System.out.println("Houve um erro em criarStreaming");
System.out.println(e.getMessage());
e.printStackTrace();
catch (Exception e) {
System.out.println(e.getMessage());
public void configurarServidor(String ip, int porta)
System.out.println("**************************************************************");
String url = "rtp://" + ip + ":" + porta + "/audio/1";
System.out.println("Servidor ira atender em " + url);
MediaLocator mml = new MediaLocator(url);
System.out.println("Localizador de midia ja criado");
try {
System.out.println("Criando um DataSink a ser enviado.");
dsk = Manager.createDataSink(ds, mml);
System.out.println("DataSink criado.");
} catch (NoDataSinkException e) {
e.printStackTrace();
public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Gives that output console.
All methods are executed but the last doesnt works.
The method that open the DataSink.
What can I do?
Iniciando processo de servidor de multimidia em Sun May 13 22:37:02 BRT 2007
Midia realizada com sucesso.
[file:///c:\radio.wav ]
Processor criado com sucesso.
Midia com durcao:9.223372036854776E9
Processor em estado de configura��o.
Processor configurado.
Descritor de conteudo:RAW
Midia codificada...
Processor entra em estado de realize.
Processor realized.
Adquirindo o streaming a ser enviado.
Streaming adquirido pronto a ser enviado.
Servidor ira atender em rtp://127.0.0.1:22000/audio/1
Localizador de midia ja criado
Criando um DataSink a ser enviado.
streams is [Lcom.sun.media.multiplexer.RawBufferMux$RawBufferSourceStream;@a0dcd9 : 1
sink: setOutputLocator rtp://127.0.0.1:22000/audio/1
DataSink criado.
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)
Since already thanks so much.
Exactally in this method raises erros.
Ive tried another formats (avi, mp3) but all with the same error, what I can do?
[code] public void iniciarServidor()
try {
System.out.println("**************************************************************");
dsk.open();
System.out.println("Servidor ligado.");
dsk.start();
System.out.println("Servidor iniciado.");
} catch (SecurityException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
Track 0 is set to transmit as:
unknown, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed, 176400.0 frame rate, FrameSize=32 bits
java.io.IOException: Format of Stream not supported in RTP Session Manager
at com.sun.media.datasink.rtp.Handler.open(Handler.java:139)
at br.org.multimidiasi.motor.Servidor.iniciarServidor(Servidor.java:291)
at br.org.multimidiasi.motor.Servidor.iniciarServicoServidor(Servidor.java:43)
at br.org.multimidiasi.motor.ConsoleServidor.main(ConsoleServidor.java:30)

unknown, 44100.0 Hz, 16-bit, Stereo,
LittleEndian, Signed, 176400.0 frame rate,
FrameSize=32 bits
java.io.IOException: Format of Stream not supported
in RTP Session Manager
The fact that it doesn't know what the format is
might have to do with the problem. I've had similar
problems, and I've traced it back to missing jars and
codecs. Have you tried running the same code locally
without the transmission to see if you player will
even play the file?Already and it works, I used Player to play it and play normally, I try to make it with the diferents codecs of audio and video, but no sucess.

BI Administrator error: Session Management will not work

Hi!
I am about to set up BI Administrator Addon in SAP Portal. All the configuration steps seems to be ok.
Unfortunately when I try to start some of applications of BI Administrator I get the following error:
Session Management will not work.
Please check the DSM log file for details
Question:
How can I solve this problem?
Thank you very much!
regards

Hi
This error means--Please notify us of this problem by submitting an IT Service Request (Please Note: In order to log into the Infra system, you will need to preface your NKU account with nku\. For example, if your user name is smithj7, the "User Name" field would need to be populated with nku\smithj7.)
under the problem type "SAP BW/Portal.
Much of EP / BASIS issue.
Hope it helps

TListen not starting...Session Manager error

Hi
when i install tuxedo 7.1 , i get an error that tuxedo/bin was not added in the
Session Manager..and then my listener does not start..
any clue in to that..
Thanks in advance
Vivek

starts up the instance and shuts down immediately.
Here is the log
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Starting up database "sales"
Thu Dec 24 23:26:47 IST 2009
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 24 23:26:47 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORA-00371: not enough shared pool memory, should be atleast 62198988 bytes
SQL> Disconnected
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Database instance "sales" warm started.

I deleted my saved sessions in session manager in error. Can I recover these in any way?

As above

*http://sessionmanager.mozdev.org/documentation.html
There is an option to have Session Manager automatically back up your current browsing session at browser shutdown, ask you if you want to save or never save. By default it backs up the ten previous browsing sessions and crashes (deleting older ones). This can be changed in the Startup and Shutdown options on the General Options page. Old sessions are only removed on browser shutdown. Restarting or recovering from a crash will not remove old sessions. Warning, the backup is made when the browser actually shut downs, so if you close the browser by "X"ing out of all the windows, only the last window will be saved. If you want to save the last session, use the File->Exit command or better yet manually save it or use the autosave feature.

Error authenticating proxy while running agent job

I am trying to schedule a SSIS2014 package via SQL Server Agent job. Both SSIS and SSMS are running on my local machine in the same domain. I am running SSMS with the same user
Domain\Admin which is the creator of the SSIS package. SSMS 32-Bit and SSIS 32-Bit are running on Windows 7 64-Bit machine. I can run the package within SSIS without problems.
When I use a proxy account to run the job step, the following message occurs:
Unable to start execution of step 1 (reason: Error authenticating proxy `Domain\Admin`, system error: Logon failure: unknown user name or bad password.). The step failed.
The proxy account uses the credentials identity Domain\Admin. Since the password fields for credential properties in SSMS cannot be left blank, I typed any password although my corresponding windows account has no password. So as mentioned above
it's the same user account that created the SSIS package since Domain\Admin is stated in the CreatorName property of the SSIS package.
With this proxy, I tried to run SSIS jobs using the package ProtectionLevel's
EncryptSensitiveWithUserKey and EncryptSensitiveWithPassword. Running the package manually within SSDT without problems, but from SSMS agent job the same error message appears. I tried the package sources "File System" and, after
importing the package to MSDB, "SQL Server" and "SSIS Package Store". But exactly the same error message appears with each method.
Task manager shows that SSMS is running in administrator mode. Using Windows Component Services I added DCOM permissions for
Domain\Admin to start and activate "Microsoft SQL Server Integration Services 12.0" from local. But the same error message appears. So in my opinion it's a problem with SSMS user account permissions (???) but unfortunately I don't know
what exactly to do here. I tried the following:
In the system database MSDB (full path: Databases / System Databases / MSDB / Security / Logins) I assigned all available role memberships (Including db_ssisoperator, db_ssisltduser, db_ssisadmin) to
Domain\Admin.
In server security (full path: Security / Logins) I assigned all available server roles. In the tab User Mapping, I assigned the MSDB database.
Still the same error message appears when I try to run the job. Does anybody have some ideas what I can try?

If you use the Agent then set the package protection to "Rely on server".
Then Domain/Admin is probably not an actual proxy but the account the Agent is running under, in this or even any case follow http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/ to create the
proper proxy for the packages.
Arthur My Blog

ERROR :IAIK REJECTED BY CERTICATE

Hi,
secnario rfc>soap(Digitally sign and encrypt)
error: IAIK REJECTED BY CERTICATE
we are trying to test signing and encryption using soap1.1 in pi7.11 system
we created test interface ,we checked mapping it is ok
i created private certificate and generated CA using service.sap.com/tcs and copied and pasted the response to same txt file which pem and renamed it as crt
now,i loaded the crt file to default Q in NWA as x.509 certificate
I have selected only sign option in reciver agreement ,activated and tested with triggering rfc ,error iaik peer certificate rejected
Tried all possible ways:
1)tried with custom view and default view/no go
2)tried by putting the x509 certificate in trusted CA,as it is a test certificate generated from service,sap.com/tcs,no orginal CA
3)Restarted java engine,icm,checked all settings like rfc etc
4)Followed all the instructions by forums,blogs,wikis
Need step by step advise and help,by an sr Expert in Forum

Hi All,
We are having same issue with the FTPS in our SAP PI systems. On the Target FTP server side we are using the Proftpd software for the FTPS installed and configuration on port 990 and generated Certificate on FTP Server using Proftpd software.
In SAP PI server Communication Channel Configuration we use below FTP configuration.
FTP Connection Parameters.
Server : xxxxx
Port :990
Data Connection : Passive
Connection Security : FTPS (FTP Using SSL/TLS) for Control Connection
Command Order : AUTH TLS,USER,PASS,PBSZ,PROT
We are not using any [ ] X.509 Certificate for Clinet Authentication
The above Parameter settings for FTPS working fine without any issues, CC Polling process successfully finishing for every 60 seconds as defined.
ISSUE
When we change the Connection Security : FTPS(FTP Using SSL/TLS) for Control and Data connection
and start the CC its geting errors "........ Certificate rejected by Chain Verifier".
We tried with couple of options on the Proftpd FTP client configuration file
with TLSRequired <on> <auth+data> but getting same error, but its working fine with the option
TLSRequired ctrl.
Please let us know your suggestions whether we can continue withe the Control Connection option or any solution if we use Control and Data Connection.
Thanks in advance
Gary.

Authentication Failed error message on browser while login to author instance

Hi,
I ran backup on author and publish instance after datastore garbage collector.
It went fine on publish instance and created backup file succesfully.
But at some point of time backup failed on author instance and we tried to login on author instance we got cq5 console on browser.
After that we checked replication agent on author and wheni clicked to publish we got error page saying Class not found exception.
after some time we just bounced the author instance we got startup completed message ver quickly and not started all the bundles(started only 121 bundles).
Tried to login author instance on browser it was showing Authentication Failed message.
Please helpout in resolving this issue.
Thanks in Advance.
Mahesh

I did not really understand what the problem with the domain/hostname or so is you mentioned but lets set it aside and assume that it doesnt cause any further problems for now.
About your questions:
1) With which user do you try to login?
"amadmin" is default name for the administrative user.
Did you rename him or do you try to log in with another user?
"amadmin" is probably the only user which "works" just after installing.
When you go to portal/dt, are you logged in or are you on the anonymous desktop? If you did not make any changes you shold get either a login channel or a Userinfo channel.
This way you should be able to see if you are logged in.
Also important for you:
Logfiles for access manager and portal are by default placed in the folder /var/opt/SUNWam/. There is a debug and logs folder.
These loggings are most of the time more helpfull than the directory server logs.
To get a finer logging edit the file /etc/opt/SUNWam/AMConfig.properties
There is a line "...=error". Replace error with message and restart the webserver/appserver-domain.
hth Chris

Cisco UCS Management Pack for System Center Operations Manager 2007 R2 Login Error

I have Cisco UCS 1.4 (3q) and just installed the MP v2.1 for Cisco UCS, however when I click on the "Management Pack Events" alert view in the SCOM console, there are error for event number 19900. The description of the error is as follows:
Description:
CISCO UCS R2 MP (https://10.x.x.x/nuova) [CISCO.UCS.R2.Proxy.LoadCache.ProbeAction.vbs] : CISCO UCS Login Error: Authentication failed (Code: 551)
I noticed that it's looking for the /nuova directory, but in order to login to our UCS environment, we usually just go to the IP address - so I'm wondering if that has something to do with it? I've verified that when going directly to the IP from Internet Explorer I can login using the opsmgr credentials we specifically created for this account. I've also gone through the process of creating a run-as account on the SCOM side and associated it with the correct profiles.
Any help is greatly appreciated.

Troubleshooting has found out its user error, wrong password configured.

OID error authenticating orcladmin user

Hi,
I am in the process of switching the OID instance I am using on my local machine to a remote machine. Essentially I want to use the OID instance running on that remote machine.
I have specified the host and port, but when I try and add the username and password in step 2 (cn=orcladmin) I get the following error :
javax.naming.AuthenticationException: [LDAP: error code 49 - Invalid Credentials]
Error authenticating user. [LDAP: error code 49 - Invalid Credentials]
I know my username and password are correct as I can connect to the OID instance using the Oracle Directory Manager.
Does anyone have any ideas what I need to do to resolve this ?
Thanks,

This is strange as orcladmin usually already has administrative privileges after installation (Both cn=orcladmin and cn=orcladmin,cn=users,dc=whatever domain).
You may check this on the oidadmin, here on my environment, cn=orcladmin,cn=Users,dc=..domain.. is member of the group cn=IAS & User Mgmt Application Admins,cn=Groups,cn=OracleContext,dc=..domain..., and this group is inside the group cn=iASAdmins,cn=Groups,cn=OracleContext (This one is in the root context, not inside the domain tree). But all this is setup automatically during installation, you shouldnt be needing to change it, there is no reference to this stuff on the documentation that I am aware of.
Post a reference to what manual or note are you following.
Regards,
Luis

Open management shell with a error

Hi
when I open the exchange management shell . The error code will show below.
VERBOSE: Connecting to myservername.mydomain.com
New-PSSession : [myservername.mydomain.com] Connecting to remote server myservername.mydomain.com failed with the following
error message : WinRM cannot process the request. The following error with errorcode 0x80090324 occurred while using
Kerberos authentication: There is a time and/or date difference between the client and server.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or
use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more
information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
Any solutions can help .?

Hi,
According to error code, it’s mostly likely related to the time sync.
Thus, let’s try to manually synchronize the computer with the time on the domain.
1.Click Start, and then click Run.
2.Type net time /domain /set, and then click OK.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Cash Management - Open interface - raise error

in Cash Management - Bank Reconciliation, Open interface,
APPS.CE_999_PKG.clear
and
APPS.CE_999_PKG.unclear
i would like to check and if meet certain condition, i would like to raise error/exception, so that the Reconcile or UnReconcile can not proceed, how can I do that?
i try to do a plsql 'raise exception', in ebs screen, show
'FRM-40734: Internal Error: PL/SQl error occurred.'
anyway to show the error msg in a popup msg box and/or display with more meaningful error message?

Hi Brian,
This is because, one payment/receipt cannot be shared by more than one bank statement line. This is why once payment/receipt is reconciled against a bank statement line, you can view this transaction only from reconciled screen.
Regards,
Kiran

Session management error: Authentication Rejected error

Similar Messages

Maybe you are looking for