Open management shell with a error

Hi
when I open the exchange management shell . The error code will show below.
VERBOSE: Connecting to myservername.mydomain.com
New-PSSession : [myservername.mydomain.com] Connecting to remote server myservername.mydomain.com failed with the following
error message : WinRM cannot process the request. The following error with errorcode 0x80090324 occurred while using
Kerberos authentication: There is a time and/or date difference between the client and server.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or
use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more
information, see the about_Remote_Troubleshooting Help topic.
At line:1 char:1
Any solutions can help .?

Hi,
According to error code, it’s mostly likely related to the time sync.
Thus, let’s try to manually synchronize the computer with the time on the domain.
1.Click Start, and then click Run.
2.Type net time /domain /set, and then click OK.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

Exchange Management Shell (Exch 2010) - Error when opening

Hi,
Ive an Exchange 2010 SP3 server which wont open Exchange Management Shell. When opening it, I get the following:
The term 'ImportPSSession' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At C:\Program Files\Microsoft\Exchange Server\V14\bin\connectfunctions.ps1:64 char:18
+ ImportPSSession <<<< -ClearCache:$false
+ CategoryInfo : ObjectNotFound: (ImportPSSession:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
The only difference I can see between this and another server which works is get-modules shows the output below on the one that works but the one that fails doesnt show anything. (This could be a symptom though rather than the cause.)
ModuleType Name ExportedCommands
Script <ServerNameReplaced>... {Get-IRMConfiguration, New-MailUser, Enable-CmdletExtensionAgent, New-Ac...
Ive tried copying over the files in this article, but it didnt work:
http://blogs.technet.com/b/nawar/archive/2010/09/03/exchange-management-shell-ems-missing-after-applying-exchange-2010-sp1.aspx
Any help appreciated!?
Thanks
Stephen

Because that article has files from Exchange 2010 SP1 and you are running SP3.
If you have another server you can copy the file from that server to affected server
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Set up for access manager fails with this error. Pl. Help

Bug Report Form
An error has occurred while executing the application.
Your browser does not support automatic mail sending.
Please E-Mail to the following information
Your Name
Organization
E-Mail Address
Phone Number
Comment
Make sure to append the following traceback in the mail.
Traceback \Oblix\coreid\palantir\webplugins\src\setup_admin.cpp:10389: Error: Exception re-thrown in SetupAdmin HandleEvent()
\Oblix\coreid\palantir\webplugins\src\setup_admin.cpp:10604: Error: Exception re-thrown in SetupAdmin HandleEvent()
\Oblix\coreid\palantir\webplugins\src\setup_admin.cpp:4589: Error: Exception re-thrown in SetupAdmin::GenProcessLDAPPersonOC()
\Oblix\coreid\palantir\webplugins\src\setup_admin.cpp:4119: Error: Exception re-thrown in SetupAdmin::CreateConfigInfo()
\Oblix\coreid\palantir\dblib\src\obconfig_db.cpp:460: Error: Exception re-thrown in ObConfigDB::Flush()
\Oblix\coreid\palantir\dblib\src\ldap_config_db.cpp:519: Error: Exception re-thrown in LDAPConfigDB::WriteOblixDBConfig()
ldap_util_failover.cpp:135: Error: Exception re-thrown in LDAPCompareAttrWFailover()
ldap_util_failover.cpp:121: Error: Unable to compare attributes - No such object in LDAPCompareAttr()
Product NetPoint User Manager Version
Platform Microsoft Windows
What to do???

Hi ,
This message occurs when the listener on the remote node cannot be contacted.
Did you add the host name and IP in your DNS server?
You can try tracing the path or the route a connection is taking from the client to the server. If it encounters an error, then it returns the error stack which gives us more information when compared to an cryptic one line error.
Execute the following:
trcroute host_name
This will help you find the problem and fix it. The problem may fall into one of the following areas:
Check TNSNAMES.ORA:
The TNSNAMES.ORA may contain a wrong address. Check the host and port have been specified correctly. Check the details against the LISTENER.ORA file.
Check the remote node:
Check if the listener has been started on the remote node. Check the status with the STATUS command of the listener control utility (lsnrctl):
lsnrctl
lsnrctl> status listener_name
listener_name is the name of the listener defined in the listener.ora file. If you have not changed the listener name, then it would be called LISTENER.
If the listener has not been started, start it with the command:
lsnrctl> start listener_name
You can check if the fix worked by executing tnsping. It should return an "OK" message if the TNSPING has been successful.
Thanks..
Mohit

KDE Printer Manager fails with "client-error-bad-request"

I'm having some trouble with printing on my system. The KDE printer manager shows "client-error-bad-request" and no other information. When I run the KCM from the command line, I also get "kcmshell(17286) KCupsRequest::serverError: status unrecognised: 1024" on the console. I wasn't able to find any useful information on this issue on google or these forums; not even what the 1024 status code means. It seems to me that this may be a bug in the kcm_printer_manager module, but I'd like to rule out other possibilities first. Unfortunately, I don't know what to try from here. I'll provide as much potentially relevant information as I can think of below.
Changes since last successful print job:
Multiple updates to KDE packages
Update to cups that changed systemd unit file names.
Stopped and disbled old units
daemon-reload
Enable and start new units
Other updates to cups since then, if I recall correctly.
Packages and versions:
kdeutils-print-manager 4.14.3-1 (owns kcm_printer_manager module for kcmshell4)
kdebase-runtime 4.14.3-1 (owns kcmshell4 binary)
cups 2.0.1-1
libcups 2.0.1-1
systemd 218-1
linux 3.17.6-1
Let me know if any other information might be helpful.

Anyone please help.
Thanks,
Orton

Downloaded Latest Itunes but now it does not open at all, with no error msg

I have downloaded the latest version of iTunes for my Laptop. I have recently moved my internet to my laptop so i have been updating software for the past two days.
However, when the download of Itunes is finish i can not open it. There is no error message at all, it just does not open, it just begins to load with the 'hourglass' waiting symbol and then stops. I can't open it at all.
I am runnin on Windows XP and had no previous trouble with the older version of iTunes. I am now regretting that i even updated. Any help would be greatly appreciated.
Thank you.
Claudia.

I had exactl the same problem, it drove me crazy for about one week. Actually both 7.1.1 and any 6.x version didn't want to install on my PC.
7.1.1 just downloaded ok and than after running it terminated with no message and no action.
I tried almost everything: from manually removing all WinXP Registry entries to checking the entrire Win installation.
I also tried to download itunes from a different PC, but again same result.
Finally, I gave it a try to download iTunes from a different web site and... everything worked flawlessy!!
The only conclusion I came to is a possible issue between my network/firewall/ISP settings and Apple download services.. very hard to justify in real world but I can't think of anything else.
So my advice is to look for another web site hosting iTunes for donwload and give it a try!
Good luck
Diego

Solaris Console Management crashing with java errors

Hi,
Whenever I am trying to run smc, it's crashing with following java errors:
com.sun.management.viper.CriticalStopException: host1: host1
at com.sun.management.viperimpl.console.gui.SMCConsole.start(SMCConsole.java:280)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.openConsole(BaseConsoleOptionsManager.java:791)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.redirectToConsole(BaseConsoleOptionsManager.java:660)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:176)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:873)
Showrev:
Hostname: host1
Hostid: xxxxxxx
Release: 5.10
Kernel architecture: sun4u
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_125100-10
Host1:3:
Most up todate patches for wbem and smc
Patch: 119313-14
Patch: 121308-09
Patch: 121308-12
Patch: 124188-02
/etc/init.d/init.wbem status
Solaris Management Console server not running on port 898.
/etc/init.d/init.wbem start
/etc/init.d/init.wbem status
Solaris Management Console server not running on port 898.
Please advice me. I need help!
Thanks!
Mahima
Edited by: kaush28 on Jan 8, 2008 4:25 PM
Edited by: kaush28 on Jan 8, 2008 4:27 PM

SMC was working fine for me before installing 121308-12. Then it began throwing the following upon startup of SMC and would not recognize any hosts with the webconsole service running. Backing it out does restore operation. Has anyone else seen this?
# smc &
java.lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:396)
at java.util.Properties.setProperty(Properties.java:128)
at java.lang.System.setProperty(System.java:700)
at com.sun.management.viperimpl.util.security.SMCSSLConfig.setup(SMCSSLConfig.java:158)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.init(BaseConsoleOptionsManager.java:188)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.launchConsole(BaseConsoleOptionsManager.java:167)
at com.sun.management.viperimpl.console.BaseConsoleOptionsManager.main(BaseConsoleOptionsManager.java:873)
Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
Java Accessibility Bridge for GNOME loaded.

Desktop Manager crashes with "unknown error" message before sync starts

I have the latest phone software, the very latest version of the desktop software and I can't get the sync to get past the initialization stage before it crashes. I've read some of the other posts about changing the synch settings but I can't even get to the settings options before it crashes. I've uninstalled the desktop software and reinstalled it (both with and without the media manager add on). I've done a battery pull on the phone itself. I've even done a restore of the last good backup of the phone.
Is it just me or does this house of cards seem to collapse every time there's an update to either the desktop software or the phone software?

Hi and welcome to the forums! rjcanter wrote:
I have the latest phone software, the very latest version of the desktop software
Desktop Manager 4.7 with or without media manager?
and I can't get the sync to get past the initialization stage before it crashes. I've read some of the other posts about changing the synch settings but I can't even get to the settings options before it crashes. I've uninstalled the desktop software and reinstalled it (both with and without the media manager add on). I've done a battery pull on the phone itself. I've even done a restore of the last good backup of the phone.
If you have reinstalled the software without using the clean removal procedure I recommend you
use the procedure and the install the desktop manager again. The procedure cleans the registry and
completely strips all directories etc. This will save you headaches in the long run.
Use the first procedure to check the possible causes of the "unknown error".
Is it just me or does this house of cards seem to collapse every time there's an update to either the desktop software or the phone software?
Most posts I see regarding any new desktop manager are installation and setup errors by far.
The other posts mainly are Windows OS programs that aren't updated or unique to a specific PC setup.
House of cards? I don't think there are enough cards for a double deck pinochle game.
Thanks,
Bifocals
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13801&sliceId=1&docTy...
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
Message Edited by Bifocals on 06-14-2009 02:46 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

P3 Project Manager Crashing with EBDClient error, when refreshing (F5)

My company has 3 sql databases for Prima on a server; 2 are approximately 1.5GB, and the third is just over 2GB
We have 5 client machines (xp sp3 32bit), that use the following setup:
P3 Project Manager version 5 (no service packs installed, but have tried sp1-3 on my machine with the same error)
oracle client 9.2 with tnsnames pointing to the sql server with the prima databases
each machine has 2GB memory with a 3-4GB pagefile
I do not have issues refreshing the other smaller databases.
both the client and server do not take a significant hit on resources while refreshing.
both the server and client are not reporting any errors under event viewer.
they all receive the following error when refreshing (F5) while logged in the third and largest database:
Message (Tab)
Application exception
type: EDBClient
Event code: IMFTO-3501-8
Description: Insufficient memory for this operation
Context (tab)
app title: primavera project management
exe: pm.exe
object: tmainmenu
context:
     1. tfrmmain.refreshVDBengine
     2. tfrmmain.actrefreshExecute
     3. tfrmmain.actProjectActivitiesExecute
     4. tfrmmain.actProjectsExecute
     5. tfrmmain.actProjectsActivitiesExecute
     6. tfrmmain.actProjectWBSExecute
     7. tfrmmain.actProjectActivitiesExecute
Evironment (tab)
Components
=============
ORI: ORI Win32 #
ORI/DB: PMDB,0500.0024.0001.0002
IMG: IMG win32 #1000
SYS INFO
=============
username: "user's name" Hostname: "their computer name"
OS version:     winNT 5.1, build 2600, SP3

...\OracleBI\web\catalogmanager\catalogmanager.ini
-vmargs
-Xmx1024M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true
amend---------------------------------------------------------
-vmargs
-Xmx512M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true

ITunes don't want to open... with no error message !

I've just bougth a iPod, and I installed all the required software... successfuly. But, when I click on iTunes's shortcut... HE DON'T OPEN ! I try everything and there's nothing on the subjet on the Web... Help me please !

top fixes for a new iTunes install/upgrade are
- turning off security software such as Norton before the install as Apple suggests
- installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
- setting up Norton to allow iTunes
- scanning for malware with ewido (Free at www.ewido.net/en/)
- last but not least, using MSCONFIG to find Windows conflicts
http://docs.info.apple.com/article.html?artnum=302538
Post back with any questions or your solution.

Connect to Exchange 2007 Mailboxes with Exchange 2013 Management shell

Hello,
I was wondering if it is possible to use the Exchange 2013 Management Shell with the older version of Exchange 2007. When I run the console now it give me an error saying no exchange servers are available in the Active Directory site. When I use Exchange
management shell for 2007 the errors do not appear. Wondering if the management shell is backwards compatible.
Thanks,

No. your management shell MUST be the same roll-up version of exchange. I have applied updates and learned the hard way to block all updates that go beyond the server version you are
running.
http://social.technet.microsoft.com/wiki/contents/articles/240.exchange-server-and-update-rollup-bui...
To this end, you can use the same installation media that was used to install your Exchange server "Provided you are hosting your own", just install the management console instead of the whole thing,

Network .XLAM with 101590 Error code

I have a read-only .xlam file that is saved on a network drive. When one user opens the file they receive error code 101590. If the xlam file is
copied to their local drive it runs fine. Unfortunately, this particular file needs to be run from a network location.
Other users are able to open this file with no errors.

Hi,
Is the user install the Excel version the same as the others?
And if the version is the same, then try to start Excel in safe mode to open the file to check whether the issue is caused by some add-ins.
If the above method cannot solve the issue, then start Windows in clean boot to check whether the issue is caused by some third party services.
Jaynet Zhang
TechNet Community Support

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6
This is not a REMOTE Exchange 2010 server, I'm launching it from the SBS2011 Console with the Domain Admin.
It looks like a permissions error, because when I use "RUN AS ADMINISTRATOR" on the exchange management tool, it launches with no errors and no issues...
I searched and I couldn't find anything that fits this exact error.
Thanks
Russ

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

Error when i try to open exchange shell management

hello ,
when i try to open may management shell exchange, indeed the system told me connecting to remote exchange server failed, he tried to use kerberos authentication mechanism but failed.
What's the problem, what can i do to fix it.
Note that yesterday i tried to install a dag, don't know if this make a probleme
i need to access to the shell to chage the mode of my server tu dual.
thanks,
B.R.

Hi B.R,
I found a similar disscussion which may be helpful for you:
Exchange Management Shell fails to
connect to Exchange Server 2013
Best Regards,
Anna

Error connecting to the Exchange Management Shell - and no one can connect w/ Outlook or OWA

Whew - I'm not sure what's happening but everything blew up this morning when another admin rebooted the server...
I can't connect to the Exchange Management shell - I get this:
[<servername>.<domainname>.local] Connecting to remote server failed with the following error message : WS-Management cannot process the request. The operation failed because of an HTTP error. The HTTP error (12152) is: The server returned
an invalid or unrecognized response . For more information, see the about_Remote_Troubleshooting Help topic. + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
And in digging around, re-running the sharepoint PSConfig appeard to be a fix for a related issue I was reading about, and since there didn't seemt to be any harm in running it again (I did find the technote and had manually ran it after SP1 was installed)
I ran it and this is an excerpt from the log:
09/08/2011 16:48:05 1 INF                      Entering function Farm.Clear
09/08/2011 16:48:05 1 INF                        Entering function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                        Leaving function CentralAdminServiceInstance.Reset
09/08/2011 16:48:05 1 INF                      Leaving function Farm.Clear
09/08/2011 16:48:05 1 INF                    Leaving function Farm.TryIsJoinedToFarm
09/08/2011 16:48:05 1 ERR                    A failure has been encountered when trying to load the Farm
09/08/2011 16:48:05 1 INF                    Entering function StringResourceManager.GetResourceString
09/08/2011 16:48:05 1 INF                      Resource id to be retrieved is FarmIsJoinedFailureWhileUsingCommandLine for language English
(United States)
09/08/2011 16:48:05 1 INF                      Resource retrieved id FarmIsJoinedFailureWhileUsingCommandLine is Failed to detect if this
server is joined to a server farm. Possible reasons for this failure could be that you no longer have the appropriate permissions to the server farm, the database server hosting the server farm is unresponsive, the configuration database is inaccessible
or this server has been removed from the server farm. To diagnose this problem further, review the extended error information located at {0}. If this problem persists, run this wizard again to disconnect from the server farm. After disconnecting,
run the wizard again to create or connect to an existing server farm.
So I seem to have some massive permissions issues. Is there any kind of a technote or walkthrough that can step me through verifying what permissions should be where? The connect to Internet Wizard won't complete complaining it can't configure
the email and to run it again. That caused the Set Up your Internet Address wizard to not run, complaining you have to run the connect to Internet wizard.

Is there any update on the issue?
No. I gave up and rebuilt the server - this time inside of HyperV!
It's definetly a problem of some sort of a problem with IIS, that much is obvious. It's frustrating, because by not being able to get to the Exchange Management Shell it made recovery of the Exchange database VERY hard.
The rest of this will be a bit of a rant so feel free to stop reading here if you like :)
I'm pretty unhappy with the fragility of recovering an Exchange databas in general - there is a VERY narrow range of parameters to get mail back - and very many things that can prevent you from recovering. Had I suspected that there would have been
1/10th the pain in recovering mail, before I tried to connect the clients to the new exchange I would have made .PST files for everyone - which would have worked since they all had cached .OST files, even if the clients couldn't talk to Exchange due to the
aformentioned IIS problems. Anyway, it was a total nightmare, extremly frustrating and while many of my problems were probalby self-induced, the total lack of a coherant disaster recovery strategy has at least motivated me to be EXTREMLY diligent about
backups - and not just backups, but ensuring that the SBS backup is working and occasionally firing up a clone VM and doing a restore to ensure the one of two ways Exchange can be successfully backed up are indeed working.
With such an extreme dependence on IIS for client acces AND managemet of Exchange, there really, REALLY needs to be more documentation on how Exchange uses IIS, how to step through the registry and other low-level internals to troubleshoot and compare.
I must have read just about every technet article and literallly hundreds of blog entries on recovering Exchange - but the lack of information about Exchange's integration and dependancies on IIS were the most frustrating of all. Talk about putting all
your eggs in one basket and a huge single point of failure ticking time bomb!
And I think it was either SharePoint Express or an accidently applied SharePoint Express update that blew up IIS. A few days after that update got applied the server was restarted, and that's when everything went completly sideways. That's whats
even more frustrating - that so many applications are so dependant on a now essential layer is frustrating. I realize SBS is an exception to the rule - generally Exchange is installed on it's own server and this isn't a remote possiblity, but any update
(or installer) that messes with IIS really needs to check the environment it's going to go into, and if there is anything at all that could possibly cause a compatibility issue, the update should "fail open" and not install wtihout explicit confirmation
from the admin that he wants to isntall it. Then again, another admin either ran the installer or approved the SP Express update so that still may not have saved me - but if he saw an explicit warning he probably would not have just clicked through
it!
Oh well - thanks for reading if you went all the way through. I'm just glad that it's now over :)

Open management shell with a error

Similar Messages

Maybe you are looking for