Session not avalable between two requests

I am developing a shopping application.
I have a servlet which dispatches to a jsp after processing a request.
For every request a new session is being created.
I am not sure if i am overlooking anything.
Can anyone point me to what i am overlooking.
Many thanks in advance.
Ahmed.

The cart object i saved in the session is not available during the next request hit from the browser.
And also i printed out the session id from different places in servlet, helper classes and jsp files.
The session id is same for one request across all components.
But when i hit the next link from browser the session id changes and hence the session.
Also the cart object is lost.
I am using jboss3.2.6 on my laptop. I tried with tomcat 4.1, 5.0 and jboss3.0.0 also. But its the same with all of them.
Yeah cookies are enabled, but i am not able to locate a cookie from my server.
I dont know how to enable url rewriting.
Is there anything additional i need to configure in the server or client.

Similar Messages

  • Call does not work between two SX80

    Hello,
        I have two SX80 TelePresence Devices installed on same Network. I want to make call ( IP to IP ) between two Sx80 and the Result was no call Establish between them.
    Are there any configuration required to do it from my side to add to the SX80?
    Note: this two SX80 WORKING stand alone ( No CUCM or MCU).
    Warm Regard,
    Idris

    Log in using SSH and ping one from the other to see if they can see each other, also ensure CallSetUp Mode is set to "Direct" and set default call protocol to H.323.
    /jens
    Please rate replies and mark question(s) as "answered" if applicable.

  • Using VMware Not ping between two nodes.

    Dear All,
    I am installing the Linux and Installing the RAC using VMWare. Shared disk and all things were done. But not ping between the two nodes.
    Regards
    Prasannavenkatesh.K

    I have previously made entry in /etc/hosts file.
    now i am able to ping all the nodes no problem
    thnks
    now i have a problem in installing oracle crs in RAC1
    I login to RAC1 as the oracle user and start the Oracle CRS installer
    and while the specify the cluster configuration screen, i came across the error
    "The installer has detected the existence of 10g oracle
    clusterware on the remote node rac2 however, 10g oracle doesn't exist in the local node If
    u wish to upgrade and existing 10g release 2 ,then u must start the installer on a mode "
    thnks in anticipation
    prassana

  • FWSM can not show sessions in xlate between two specific vlans

    Dear Experts ,
    I have FWSM running version 3.2(23) , configured with interface vlans , all having the same security level , except outside interface vlan which has security level 0 , also same-security-traffic permit inter-interface and same-security-traffic permit intra-interface are configured, my problem is when establishing sessions (I tried TCP only using ssh and telnet , in addition of ping ) from one specific vlan (172.16.1.0/28)  to other vlan (172.16.1.16/28) , I can not see the established sessions  in "show xlate debug" output ! although I can see these sessions from capture !  the two subnets are separate , two different /28.
    I can see the session established from the remaining interface vlans with same security level toward  172.16.1.16/28 , my question is what is the exception with vlan having this subnet172.16.1.0/28, how it can reach other vlan with subnnet 172.16.1.16/28 without showing anything in xlate table ? do you thing it is bug ? please advise
    Regards

    Red1,
    Need to make sure the packets are arriving on the correct interface.  Need to grab captures and the debug level syslogs at the same time. Hope you are not running into the xlate limitation of the module.
    Pls. check the limitation link here:
    http://www.cisco.com/en/US/docs/security/fwsm/fwsm32/configuration/guide/specs_f.html#wp1056716
    -Kureli
    https://supportforums.cisco.com/community/netpro/expert-corner#view=webcasts
    Upcoming Live Webcast in English: January 15, 2013
    Troubleshooting ASA and Firewall Service Modules
    Register today: http://tools.cisco.com/squish/42F25

  • How can a session be setup between two MacBook Pro's at different locations on high speed Internet connections, be setup to have a live recording session in Logic?

    My partner and I live on opposite sides of the valley here in Phoenix. About 50 miles apart one way. We are Musicians and are working on a commercial for television, and would like to know if there is a way, between FaceTime and Logic, that we can configure our MacBook Pro's to record sessions together without having to be at the same house? When we FaceTime, he can hear my keyboard through his headphones, but we can't seem to get the signal routed into Logic and register to a track when its record enabled. Is there a way for us to save gas, and record at seperate locations, so he can engineer me and I can engineer him, while we build this project in Logic and Final Cut? Here is what we are using, we have nearly identicle setups, which was planned so we might be able to do something like this. Both of us are using Mid 2012 15" MacBook Pro's with 2.6GHz Intel i7 processors and 16GB RAM. The only difference between the two MacBooks is that his has an Optical Drive, but I removed mine and replaced it with a 2nd SSD Drive, so I have two Samsung 840 Pro's each with 512GB in my MacBook Pro. His just has one Samsung 840 Pro with 512GB. We both use Focusrite Saffire Liquid 56 Firewire Audio Interfaces, and we both use Logic Studio 9 Academic. I don't know if you need to know what we are using in order to help us figure out how to configure the MacBooks for a live session, so I figured I would give you those details just in case. If you need any more information, just let me know? Oh, we both have high speed cable Internet connections. Mine is 150Mbps speed which is the absolute fastest I can get in my area. And his is only a 50Mbps speed line.
    Again, what we are looking to do is have a LIVE recording session, in Logic, with him at his house and me at my house. When we FaceTime each other, we can pretty much hear each others keyboards as if they were part of the conversation, and as crystal clear as we can hear our own when recording, but we can't seem to record enable an Audio track in Logic and route that keyboard signal into Logic and record it so we can engineer each other without either one of us having to drive to the others house, to be there to do it. If any of this even makes sense, I'm not quite sure how to better explain it. So hopefully you get what I mean, otherwise just say so, and I will try to do a better job explaining it.  :-)
    Anyone who can help us with this little problem would be greatly appreciated, and quite a hero in these two humble Musicians Worlds!! So from both of us, THANK YOU in advance for any input you might be able to give us. I look forward to hearing any and all suggestions.
    Scott

    Hey Scott
    You and ALOT of people are attempting to do this, myself included.
    Unfortunately at this point (to my knowledge) it's a pretty CRAP setup involved that will likely leave you frustrated.
    HOWEVER:
    A few things CAN be done:
    IF you are getting live audio from your partner over the internet, you can re-direct that audio directly into Logic using a program called SoundFlower.
    There are a few alternatives to SoundFlower, like JackTrip, and.....(the name eludes me)
    (SoundFlower is from a company called Cyling 74 who also makes Max MSP. )
    Once in Logic, you set your audio inputs to the track to be Soundflower. (either 16 inputs, or in this case 2)
    That all being said, regardless to speed, you are still going to experience latency in the connection, and THAT is the part that will likely drive you to the mad house.
    THIS all being said, I believe there are websites out there that are set up to actually do this kind of thing, (at least there WERE) but likely membership costs, and other "hidden" problems that you only learn about after you have signed on the dotted line. (Hopefully I am wrong?)
    If you don't need to do a "live jam", there are always solutions like DropBox that work very well for exchanging large files quickly.
    If you want to record live MIDI input from his keyboard, I am unaware of any solutions for this.
    Due to the popularity of the iPad, you might want to look into the App store, and see if there is something available.
    Good luck!
    Treatment

  • Monthly Aggregate Values are Not matching between Two Reports

    Hi,
    I have two custom reports (Pivot Table View)
    _1) National Report_ This report renders data for the 10/11 Season (From 04/01/2010 To 03/31/2011). It includes Monthly Aggregate as well as 10/11 Season Grand Total. This report shows the correct information. We don't have to do any changes.
    _2) YOYOY Report_
    This report renders data for the 10/11, 09/10, 08/09 Season (From 04/01/2008 To 03/31/2011). It includes Monthly Aggregate for each of the three seasons as well as Grand Total for each Season.
    Issue:
    Monthly Aggregate Total for the YOYOY Report is not matching with the National Report Monthly Aggregate Total.
    Technical Background:
    - For 10/11 Season, the expressions used to arrive at the Monthly Aggregate Total is the same.
    - Filter Criteria for (1) Report is specific to 10/11 Season (Rest of the criteria is similar)
    - Filter Criteria for (2) Report is for 08/09, 09/10, 10/11 Season (Rest of the criteria is similar)
    - In Report (1), Date Expressions are based on the following Attributes
    Column Name: Month
    Expression: MONTHNAME(Activity."Created Date")
    Column Name: Sort on Created Month
    Expression: CASE MONTH(Activity."Created Date") WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
    Column Name: 10/11 Season
    Expression: /* Metric column name: # of high risk infants identified since last visit */ CASE WHEN "- Activity Custom Metrics".S_INT_10 IS NULL THEN 0 ELSE "- Activity Custom Metrics".S_INT_10 END
    Aggregation Rule: Sum
    - In Report (2), Date Expressions are based on the following Attributes
    Column Name: Month Column
    Expression: Date."Calendar Month"
    Column Name: Sort on Created Month
    Expression: CASE Date."Calendar Month" WHEN 4 THEN 1 WHEN 5 THEN 2 WHEN 6 THEN 3 WHEN 7 THEN 4 WHEN 8 THEN 5 WHEN 9 THEN 6 WHEN 10 THEN 7 WHEN 11 THEN 8 WHEN 12 THEN 9 WHEN 1 THEN 10 WHEN 2 THEN 11 WHEN 3 THEN 12 END
    Column Name: 10/11 Season
    Expression: CASE WHEN Activity."Created Date" BETWEEN /* First Day of Current Season */ timestampadd(sql_tsi_day, -dayofmonth(current_date)+1, timestampadd(sql_tsi_month, -(month(current_date) - 4), Current_DATE)) AND Current_DATE THEN "- Activity Custom Metrics".S_INT_10 ELSE 0 END
    Aggregation Rule: Sum
    Key Information:
    - For 10/11 Season, Activity."Created Date" attribute is used for all the calculations based on date.
    - For 08/09 and 09/10 Season, Date.Date attribute is used for all the calculations based on date. This is because the data was migrated from Asset Record Type to Activity Record Type for these seasons.
    I have tried variety of options and nothing seems to get the Monthly Aggregate matching. Kindly suggest what changes do we require.
    Regards,
    Muddessar Nadeem Alanji
    +91-98456 13180

    Hi,
          Are you saying that you loaded the same excel document to both planning area and cube but the data in both is not matching??
    How did you load the excel data to planning area?
    Can you give more details on what data is not matching? Is the cube value smaller than the value you see in planning book?
    Secondly if you are looking at data, make sure your selections are right. In cube, you have to specify the characteristics and at the bottom of the screen you specify the number of records to be displayed. Increase that to some big number like 9999 so that you can see all the records.

  • Remote desktop not allowed between two Windows 8.1 pro pcs

    PC1 client of a domain
    PC2 notebook (no domain)
    User (in remote access) is a domain administrator and also pc1 admin.Logon is not allowed from pc2 to pc1 with the following message:
    "The system administrator has restricted the types of logon (network or interactive) that you may use. For assistance, contact your system administrator or technical support."
    no problem if I use a PC with Windows 7 or XP
    The standard configurations for remote access are equal for the two pc: no network authentication is required"
    Thanks

    Hi,
    Enable the two policies below on PC1 to check how it works:
    Computer Settings\Policies\Administrative Templates\Windows Components\Remote Desktop Session Host\Security\Require use of specific security layer for remote (RDP) connections
            Set Security Layer to RDP
    2.   Computer Settings\Policies\Administrative Templates\Windows Components\Remote Desktop Session Host\Security\ Require user authentication for remote connections by using Network Level Authentication
    Set to Disabled
    Alex Zhao
    TechNet Community Support

  • Mail in Mavericks not working between two macs.

    Hello all
    I have a 2012 iMac as well as a 2009 MacBook Pro. I am running Mavericks on both machines. I'm having issues with my exchange e-mail contacts and calendar, syncing between the two devices. I will get it to work on one device or the other but not both at the same time. More specifically in mail when it is working on one computer and I go to check my mail on the other it asks me to put in my password for that e-mail account. Every time I do this it does not work and it always returns an error. If I go to delete an account on either computer it tells me the account is linked to "Internet account" under settings for the computer. When I delete the exchange account from "Internet account" it warns me that it will delete the account off of both macs. When I re-add the exchange account mail, contacts and calander all work for whichever computer I add it on. But the other computer will only show calander or contacts not all three.
    Does anyone have an idea what might be wrong or have a solution? This is very frustrating and I cant seem to find a solution.

    Hi,
    Those last two I do not have on my iMac that is working and part of the issue I have in testing is I don't have a second Mac that will run Yosemite.
    Realistically it could be any of the ones that contain com.apple.ids.service.com.apple.private.alloy.***.plist
    The plain SMS.plist  only states it has been started up not what the Mac is linked to.
    Unfortunately nothing is standing out as the Specific one for me at the moment.
    9:34 pm      Sunday; December 28, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Session getting lost between two applications deployed on two WLS versions.

    Hi,
    Jdev version 11.1.1.5.
    I am facing an issue of session being getting lost. Let me explain the scenario.
    Our client has a legacy application(xyz) running on Web logic server(10.3.3). We have developed an application which was deployed on Web logic Server(10.3.5).
    The Legacy application will call the developed application using URL invocation. In the legacy application, the logged in user information is stored in session and the same parameter is appended to URL to call the developed application.
    In the developed application, we have a servlet which reads the URL and based on the parameter appended to it, we set the context of the application. Everything is working fine till here.
    But, in the developed application, we have a link to navigate to the legacy application. Once navigated, in legacy application if the user again calls the developed application, the session which was set earlier is lost.
    Because of this, the context is not getting set in the developed application.
    Is there a way, I can resolve this issue? OR can I raise SR with Oracle to look into it. Please suggest.
    Thanks,
    Umesh

    Thanks Frank for the reply.
    Session sharing was not configured in WLS.
    I was searching for Session sharing and I found this article written by Lucas Jellema. http://technology.amis.nl/2012/01/18/sharing-session-state-between-jee-web-application-through-weblogic-session-descriptor-of-sharing-enabled/
    Here it is mentioned that for session sharing, we need to check the Enable session sharing in weblogic-application.xml.
    My question is do we need to make this change in both the application? i.e Legacy application and developed application.
    And it was mentioned in the article that both the web app were deployed to a single Web Logic Server. But in my case the Legacy application is deployed to 10.3.3 and developed application is deployed to 10.3.5.
    In this case will the session sharing works?
    Any how I will let our client know about this change and will give a try.
    Thanks,
    Umesh

  • Session not shared between multiple wars, with no cookies

    I posted an earlier query on multiple wars in the same application.
    Actually session is maintained and getting shared on the server when
    browser supports cookies.
    When Browser does not support cookies i have the following problem,
    a) Without cookies URL's(href tags) work fine because they are bieng
    rewritten.
    b) The first form i call always has hidden tags with session id value
    and it works fine
    c) But in all susequent forms there is no hidden session id.(My forms
    are all JSP pages.).
    My questiona are
    1) under what situations does the server add session id hidden tags in
    html form.
    2)And how do I get them created automatically when browser does not
    support cookies.
    3) And why are the hidden tags being set for the first request. (I read
    in previous posts that is because the server does not know if browser
    supports cookies for first time) How does it know the second time. What
    html header gives this info.

    >
    1) under what situations does the server add session id hidden tags in
    html form.The webconnector should rewrite the sessionid whenever the browser might
    not support cookies. (And it has configured to allow URL re-writing.)
    Obviously you are having a problem with this, but based on the information
    you are providing I don't have any insight on why yet. Works for me. Try
    opening a support ticket and/or posting some more information.
    >
    2)And how do I get them created automatically when browser does not
    support cookies.This should happen automatically, unless you have changed the NoCookie
    setting in the registry.
    >
    3) And why are the hidden tags being set for the first request. (I read
    in previous posts that is because the server does not know if browser
    supports cookies for first time) How does it know the second time. What
    html header gives this info.Yes, hidden tags are set for the first request because the webconnector
    doesn't know if the browser supports cookies.
    The second request it knows that cookies are supported because the browser
    successfully has returned the cookie it sent the first time.
    David

  • Data not passing between two Views in FPM-GAF

    Hello All
    I have first screen (view) configured with Initial screen and second view with main step using FPM GAF. But data is not passing from first screen to second screen. All  views/Windows contains in the one component.
    Example: In First Screen contains Employee Data in table , selecting the row clicks on button it is navigating to other screen (Mainstep) BUT selected data is not passing.
    BR
    -CW

    Hello Williams,
    CarlinWilliams wrote:
    > From FPM Intial Screen of data is not passing to the second screen. Where as in other Steps data is passing.
    I'm bit surprised to hear that this is working in other screens. As per the FPM concepts (my understanding), for the parent component that is used in child component, it will create a new instance and it wont re-use the instance of the Parent Component that is already embedded in the Initial Screen.
    In your case, you have embeded the parent component in Initial Screen. So FPM framework will create a new instance at runtime. while navigating to the Main Step, since child component is using parent component, the FPM wont re-use the instance of parent component. Rather it will create a new instancs of parent component. Since new instance is created, the data entered in the previous step/screen wont be available. this behavior is same for all the steps.
    anyway comming to your question and solution for the same.
    1. In the child component, create another window (say PARENT_WINDOW) and embed the view that was exposed by the parent component (basically interface view of the parent component)
    2. in the GAF component configuration, for the initial screen, embed the child component and view as PARENT_WINDOW
    3. for the main step, embed the child component and view as acutal view of the child component.
    Here same component is used in both the places. Now the FPM will try to reuse the instance of the child component. As a result, the data entered in the Initial screen will be available in the Main Step as well.
    Other approach would be to use the singleton class and share the data between these two components.
    Hope this solves your problem.
    BR, Saravanan

  • Shared variable does not work between two computers

    I am using LabVIEW 8 on Windows XP computers.
    1. On one computer I have created two projects, writeProject and readProject.
    2.  In the writeProject I have a shared variable, writeData, which is "network-published" double. In this project I have a writeData.vi which in while loop assigns a random value to the writeData variable.
    3. In the readProject I have a shared variable, readData, which is "network-published" double and is bound to the writeData variable.  This is on the same computer as the writeProject.
    4. I run both the writeData.vi and the readData.vi and all works fine.
    5. Now, I create a readProject on a diferent computer.  Perform all the steps as described above and also in tools/shared variable/register computer, I have entered the IP address of the target computer on which the writeData shared variable exists.
    6. Binding the readData variable fails in the following way.  When I browse for the source, in the "Select Source Item" dialog, I see <IP> <Populating Node...>, where <IP> is the IP address of the source computer (on which exists the writeData shared variable).  A very long time later it is still "Populating Node...".  Neddless to say, this readData.vi does not work!
    What am I doing wrong?  Or, perhapse what else do I need to do to make it work?

    Hi,
    I would suggest checking out the two KnowledgeBases I have linked below for common issues with Network Shared Variables. Let me know the results. Thanks!
    Troubleshooting Network-Published Shared Variables
    Why Are My Network Shared Variables Taking Very Long to Initialize?
    Stephanie

  • AirDrop not working between two MacBook Pros

    I have a late-2013 Retina MBP running Mavericks. When trying to send files via AirDrop between my laptop and another MBP (non-Retina, circa 2010) also running Mavericks, I have intermittent success. Both machines can usually see each other, and I am able to attempt to send files between them, but more than half the time the receiving computer fails to receive the request. It just never shows up. Everything seems to work fine on the sending end.
    It doesn't matter which machine is doing the sending or receiving. Restarting doesn't matter. Sometimes it works, sometimes it doesn't, no rhyme or reason I can see. Just now I tried to send a PDF from the non-Retina to the Retina: success. Five minutes later I tried another PDF: no luck. I tried to send a file from the Retina to the non-Retina: again, no luck. Both machines can still see each other. Both laptops are only a foot apart and didn't even move in the interim. What is going on?

    I know what you mean.
    Searching around, one reasonable thing to try is trashing these preference files:
    /Library/Preferences/com.apple.P2PSupervisor.plist
    /Library/Preferences/System Configuration/CaptiveNetworkSupport/Settings.plist
    Maybe restart.
    Other things:
    Reset NVRAM and PRAM
    start up in Safe Mode
    Sacrifice a lamb.

  • Imessage not working between two iPhones

    We just got our son an Iphone 5C for christmas!  iMessage works just fine between his phone, his mother and brothers iPhones but not with my iPhone. He can send me an iMessage which I can recieve just fine but any reply I make to him is showing as a "green" (SMS) text. This is only happening with his phone and mine, any other texts I send to my wife or other son go thru as "blues". All phones are properly registered with apple with their own IDs and are all up to date with iOS 7.0.4
    Thoughts? Ideas? suggestions?
    Chris

    Hey ckeays!
    Here is an article that can help you troubleshoot this issue with iMessage:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • IChat video chat not working between two iMacs running OSX Leopard 10.5.1

    My mother in law just got a 20" iMac (metal) and is connected to her wireless router.
    I tried doing a video iChat with her, and it is not working. I am able to successfully test iChat with the three apple iChat test AIM buddy accounts.

    Screen names of Test accounts are here http://www.ralphjohns.co.uk/ContactTesters.html
    9:40 PM Wednesday; February 20, 2008

Maybe you are looking for