Set curser in a VI which frontpanel is not opend

Hi,
I've the following problem:
A Sub-VI which has several initialisation routines while start-up (takes about ~10sec). I want to set the cursor to 'busy' for this time.
The sub VI sets the cursor to 'busy' while start up, and after finishing the init routines the curser is set back to 'standard. When the Panel is open this works for shure,
but when the window is closed while start-up and opend then from main panel in between the init routine it doesn't work....
It seams that the (VI-)reference for setting the cursor is ignored o.s. when the panel is not open.
I think setting the cursor from main panel by using the VI-path of the sub-VI will work, but is there another way soving this?
Any suggestions?!

Dear _EMG_,
i have set the cursor to 'busy' in the Initialization SubVI and it worked fine too, if the
SubVI Frontpanel is not opened.
Here is the example.
Attachments:
CursorMain.vi ‏14 KB
Initialize.vi ‏14 KB

Similar Messages

HT1386 i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

i am trying to restore a backup og my iphone 4 from itunes on my macbook, it asks me for a password which i do not recall setting up, is there any way of getting this password.

No there's not. Otherwise that wouldn't be very secure, would it?

HT4946 i am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure

I am administrator for Mac. My husband and i both have separate iPhones with separate contacts. Since i0S 6.1 update these contacts are now shared which we do not want. I have set up separate iCloud email and account for my husband. How do i ensure that i

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID?

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID? If so, where do I need to change his email address info, so that his calender and contacts remain his? Thank you

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

HT1212 i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??

i just downloaded ios 7.0.2 on iphone 4 and it is now asking for a pass code which i did not even set up do??

I have an ipod 5g. i changed my passcode and then got a notification of a 7.0.2 update. i updated and now my passcode wont work? im certain that i entered the right passcode. i would try resetting on my macbook, but the screen is shattered.

When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

When I try to open editor I get an error message that I am not connected to the internet (which I am) or my computer clock is set incorrectly (which it is not).

This is normally to do with activation. You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Serial number issues or activating my product
3. Click on the blue button: Still need help? Contact us – then click the button marked “chat now”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ensure you have your serial number.
Click here to get help now Contact Customer Care

HT1918 My account was set up in the United States. I now live in Turkey and I want to update my I Tunes account information but when I update my country it changes my I Tunes to Turkish which I do not speak. I want my I Tunes to remain in English.

My I Tunes account was opened in the United States. I now live in Turkey. I wanted to update my personal information with my
address etc but when I changed my country it changed my I Tunes to Turkish which I do not speak. I had to change my country
back to the United States in order to get my I Tunes back to English. There must be some to Live in a different country and still
be able to have I Tunes in English but I haven't been able to figure it out.

Restore the device and set it up as new.
Either plug it into itunes and select restore under the summary tab, or (post ios5) go into settings, general, reset, erase all content and data. When either asks to save a backup, you dont have to....hit No etc..
This will bring the ipad to the start screen like you just bought it and erase everything.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

When trying to save a site to bookmarks I keep being directed to a Yahoo page asking me to set up a new email address which I do not want. Help please

I cannot save a web address to bookmarks. Every attempt diverts me to a Yahoo page asking me to set up a new Yahoo email account- which I do not want.

Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile
How are you adding a site to bookmarks (Ctrl + D, clicking star, Bookmarks menu, etc)?

HT4993 When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

When I send Outlook invites to my iPhone (via email) the appointments appear 3 hours earlier? The time setting appears to be EST which is accurate so I can't figure out why the appointments don't appear in real time. Thanks for your help, Ellen

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Setting bold font for nodes which are not leaf nodes

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

In JTree, is it possible to set the font for nodes which are not leaf nodes. Can I do this without using custom renderer, or at the most using a DefaultTreeCellRenderer ?
regards,
nirvan

HT4137 I have a new ipad and an old Iphone 3G I'm still using - Should I use the old Iphone to restore data to ipad or set up ipad as "new", which it is?

I have a new IPad and I'm trying to set it up - I don't know whether I should set it up as "new" (which it is) or use my
old IPhone 3G (which I still am using) to "restore" data to the Ipad - any suggestions?

Try restore from iPhone first. If you don't like the restore, you can setup your iPad to Factory Default.
Restore to Factory Default (setup as new):
Settings>General>Reset>Erase all content and settings

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple in the past asking letting me know a purchase had been made and asking if I had made the purchase, but the item listed has alway been a purchase that I had made. Since I had received similar emails in the past, I didn't think anything of it. Because I had not purchased the item listed, I immediately clicked on the link in order to change my password, which has been suggested in authentic emails i had received from Apple in the past. The site I was redirected to was exactly the same as the Apple site where you go to change your password. I entered my userID and password and it stated a verification email would be sent, if it was not sent click "resend email." When I did not receive an email, after about 10 seconds I went to the Apple site and followed the SAME EXACT step on pages that were IDENTICAL to the FRAUDULENT website I apparently had just been at. When I clicked "Send verification email," I DID receive an email within seconds, which had a special link that brought me to a page where I could change my password, which I did. I later compared a legitimate email to the FRAUDULENT email and I DID FIND A DIFFERENCE, BUT IT WAS ALMOST UNNOTICEABLE unless you were really, really looking. I doubt it would be noticed by anyone if not comparing it closely to a real email. THE DIFFERENCE WAS AT THE BOTTOM OF THE AUTHENTIC EMAIL, THERE WERE THREE LINKS THAT COULD BE SELECTED - My Apple ID/Support/Privacy Policy. ON THE FRAUDULENT EMAIL THESE LINKS WERE NOT PRESENT!!! Just today I received an email from Apple stating my password had been changed today. I did not change my password today. When I changed after getting the fake email, I did not think about my SECURITY QUESTIONS!!! If you forget your Apple password, you are able to answer the security questions in place of your ID and you get a confirmation email. Even though I changed my password within a one minute when I did not get a confirmation email with a link to change my password right away and I went dierctly to Apple's site, apparently it was enough time to take all the information on my account - INCLUDING MY DEBIT CARD NUMBER, WHICH HAD BEEN REQUIRED WHEN I INITIALLY SET UP THE ACCOUNT!!! Today I received a call from VISA FRAUD PROTECTION asking about strange activity on my account and stating they were concerned and wanted to ensure I had used the account. I HAD NOT, AND ALL THE MONEY IN MY BANK ACCOUNT HAD BEEN STOLEN!!!!! I am writing this in hopes that many people will see it and NOT FALL VICTIM TO THIS SCAM. Please pay close attention to any emails you supposedly receive from Apple - If the links "MY APPLE ID/SUPPORT/PRIVACY POLICY," PLEASE DO NOT ASSUME IT IS AN AUTHENTIC EMAIL FROM APPLE. I suggest you immediately forward the email to apple, which I didn't do because this happened days ago. Nothing was taken from my money that was already on the Apple account, and nothing had been taken from my checking account. I guess I assumed there had been something wrong with the link in the email directing me to where I could change my password, plus I had gone to the valid Apple website and changed my password for real, and I guess I was thinking that changing my password would prevent someone from being able to acces my account info. PLEASE DO NOT FALL VICTIM TO THIS SCAM AS I DID!!!!

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

I have iTunes on my laptop but it is registered to an apple id for an ipod which I have not used/owned for years. How do I add my new apple id which I use on my iPhone to my iTunes on my laptop?

I recently purchased two songs which refuse to download on my iPhone 4s. Other songs from the same albums downloaded just fine. In an attempt to recover these songs I opened iTunes on my laptop which I have not used since I sold my ipod years ago. The iTunes on my computer is associated with an old Apple ID that was connected to my iPod. How do I get my new Apple ID synced with the iTunes on my laptop?

Hello Leanna,
Thank you for the details of the issue you are experiencing. You can sign into iTunes with your Apple ID using these steps:
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
You will also need to authorize your computer to play purchases with this Apple ID:
Open iTunes
From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
When prompted, enter your Apple ID and password, then click Authorize.
iTunes Store: About authorization and deauthorization
http://support.apple.com/kb/HT1420
With the latest version of iTunes on Windows, the menu bars are hidden, so you may need to enable them to get to the Store menu. You can follow these steps to enable the menu bars:
To keep the iTunes menus active, change the setting by selecting the Menu icon in the upper-left, and then selecting Show Menu Bar. Alternatively, you can press Control-B.
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
Thank you for using Apple Support Communities.
Best,
Sheila M.

Is there a way to set wireless network priority on iphone? If not, there should be!

Is there a way to set wireless network priority on iphone? If not, there should be! I have a wireless router with dual band signals, as well as an extender at the other end of my home... it would be nice if I could set a priority list so my phone knows to always connect to the 5GHz signal if available, rather than trying to connect to the 2.4GHz signal which is on the other side of the house...

By default, the iPhone will prioritize Wi-Fi over cellular for data and when doing Wi-Fi, will latch on to the strongest signal it can associate (latch on) to. But all that is automatic, there's no evident control for manual adjustments. Other than deleting the Wi-Fi networks you don't like.

Set curser in a VI which frontpanel is not opend

Similar Messages

Maybe you are looking for