Set custom database userid for report schedules

Hi,
I am writing a c# program to reschedule reports deployed to CRS 2008. I am able to reschedule reports, but not able to use custom database username/password. All my schedules still use the original database settings from the report even after setting the property "UseOriginalDataSource" to false. Below is the code snippet I am using. Am I missing something here?
               ReportLogons rptLogons = report.ReportLogons;
                    for (int j = 1; j <= report.ReportLogons.Count; j++)
                        ReportLogon rptLogon = rptLogons[j];
                        rptLogon.UseOriginalDataSource = false;
                        rptLogon.CustomUserName = "sykampillila";
                        rptLogon.CustomPassword = "facets";
                        rptLogon.CustomDatabaseName = infoObj.ProcessingInfo.Properties["SI_LOGON_INFO"].Properties["SI_LOGON1"].Properties["SI_DB"].ToString().Trim();
Thanks
Ajith

Did you check the new instance using Query Builder?
Sincerely,
Ted Ueda

Similar Messages

Issue in setting custom identity service for soa 11.1.1.4

Hello,
I am facing issue in setting custom identity service for soa 11.1.1.4
It is not picking up the implemented UserManager (in custom IDM) implemented via ServiceProvider and IdentityStoreService.
This is configured in jps-config.xml
The same setup was working in soa 11.1.1.2
I believe there is a change done in JpsProvider in bpm-service.jar to authenticate via default login context from oracle.security.jps.internal.jaas.module.authentication.JpsUserAuthenticationLoginModule
If my uderstanding is correct,
Please guide me in implementing custom identity store and services for bpm services for soa 11.1.1.4
Tried various work arounds but no luck.
Thanks
Bala

Hi...
Can u tell me how did u set up custom identity service for 11.1.1.2 ?
Thanks

How to set custom master page for sharepoint application page ?

Hello,
I need to apply custom master page for the custom application page I created for login purpose.
Can anyone please let me know how to apply master page for custom application page ?
Note : I need to set custom master page for application page at web application level.
thanks,
Dipti Chhatrapati

Hi Dipti,
You can use the same reference as ASP.NET
Example
"<%@ Page Language="C#" masterpagefile="../_catalogs/masterpage/minimal.master" title="teste" inherits="Microsoft.SharePoint.WebPartPages.WebPartPage, Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" meta:webpartpageexpansion="full"
meta:progid="SharePoint.WebPartPage.Document" %>"
You can use SharePoint Designer 2010
http://www.microsoft.com/download/en/details.aspx?id=16573 to make the reference from you aspx page to you custom masterpage.
When you are editing a aspx page you can go to ribbon "Style" and attach the custom Masterpage.
André Lage Microsoft SharePoint, CRM Consultant
Blog:http://aaclage.blogspot.com
Codeplex:http://spupload.codeplex.com/http://simplecamlsearch.codeplex.com/

How to set custom master page for social/sites.aspx in sharepoint 2013

How to set custom master page for social/sites.aspx in sharepoint 2013.?
File path is
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\TEMPLATE\FEATURES\SocialDataStore\SocialDataStoreList\sites.aspx
Thanks in advance

Hi,
You could open the sites.aspx in Notepad or SharePoint designer, and set the master page to your own master page directly via editing:
<%@ Page language="C#" MasterPageFile="~masterurl/custom.master" Inherits="Microsoft.SharePoint.Portal.WebControls.FollowedContentWebPartPage,Microsoft.SharePoint.Portal,Version=15.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c"
%>
Regards,
Rebecca Tu
TechNet Community Support

How to set a database name for fetching metadata?

How can I tell an already-existing Connection what its database should be, in such a way that I can successfully get MetaData from the connection?
If I use the following code, everything works fine:
     Connection connection;
     DatabaseMetaData metadata;
     ResultSet rs;
     connection = DriverManager.getConnection("jdbc:mysql://Localhost/archival", mUser, mPassword); // replace this line
     metadata = connection.getMetaData();
     rs = metadata.getTables(null, null, "%", null);
But if I replace the fourth line above with these three lines:
     connection = DriverManager.getConnection("jdbc:mysql://Localhost/", mUser, mPassword);
     Statement stmt = connection.createStatement();
     stmt.execute("USE archival");
then I get a SQLException "Incorrect database name: ''". I would really prefer to factor my getConnection() code so that it doesn't have to know what the database-name is, but in order to do that I need to be able to set the database-name after the connection has been created, and still get MetaData on the connection.
TIA for any help!

Umm I probably totally don't understand the question, but you can change the name in the IDE,
and in code you can name it to whatever you want
Dim WhatEverNameIWantToGive as new button Dim secondbutton = WhatEverNameIWantToGive
or maybe you mean
public class mybutton
inherits button
'your custom code here
end class

Crystal Reports 2008 Server and MySQL DataBase source for reports

Hello,
I am having an issue with crystal reports server 2008. I have created a report on my local machine with crystal reports and the datasource is a ODBC connection to a MySQL database.
The report works fine on my local. if i publish to the Crystal Reports Server, i get an error when i try and run the report.
"error Failed to open the connection. "
I have gone into the database connections for this report and put in the connection details. I have also created a ODBC connection on the server in windows to the actual database (installed both the 32bit and 64bit ODBC drivers, both Test succesfully). But when i go into crystal no matter what settings i try it will not work.
anyone have any ideas?
kthank you

I have solved the issues. This may be usefull for anyone ...
1. Make sure on the developer machine you have your ODBC connection setup under the System DNS setting in windows.
2. On the Crystal Report Server, the exact same setup must be done under System DNS, same name, etc
Once this was done, everything was fixed.

How connect to our apex server for customer on internet for reports

We are created a report for customer and they can anonymous log on their report.
On example this link;
http://server.ourdomainname.net:8080/apex/f?p=101:1:4026431692309114
But all customer log on same link and our database performans so bad when the a lot of customer log on same link
I think this is season and wrong url link problem...
What should we do for this? And which method to use create link for report log on the internet?
Thanks.

Anton,
Now I do not get it...As I point in my thread (here is once more citate from thread):
<i>
I solve my problem with this
http://server.ourdomainname.net:8080/apex/f?p=101:1:4026431692309114
instead of
http://server.ourdomainname.net:8080/apex/f?p=101:1
</i>
is differencing in only session declaration. Many users cannot reuse the same session regardless it is public app or authenticate...they all have different session_id.
So, bad performance can occur (on database side) with more query against database and (on Apache side) some session problems or....-look in log files to get a picture.
Otherwise it is not easy to help
P.S
Place in sqlplus pure report query. Analyze it and see the if SQL tune actions are needed....outside apex and apache environment. Then you have picture where the problem reside...
P.S.
Do not use "page checksum" feature (regardless authentification exist or not).
Hope this helps

Set custom page size for printing

I want to set a custom page size for printing some PDF three and four-page musical scores to roll paper on an Epson 1290 using Adobe Reader 9.3.4 on Ubuntu 10.04. The printer properties in the print dialog has a media size option, and one of the choices is "custom", but having chosen "custom", the dialog does not allow me to add the actual page size to the lpr printer command. I can see that when I choose "custom", the lpr command is
lpr -P Stylus-Photo-1290 -o PageSize=Custom etc
but what I need for a three page output, for example, is
lpr -P Stylus-Photo-1290 -o PageSize=Custom.297x630mm etc
and I can't see how to add the actual custom paper size. If I Ok the media size choice dialog with it just set to PageSize=Custom, I can see from the output preview in the print dialog that the actual page size that has been chosen is letter. The online Adobe doc for Reader 9 printing (http://help.adobe.com/en_US/Reader/9.0/content.html#heading2.3) says "For documents that are larger than the standard page size, go to File > Page Setup. Create a custom page size before you print your document". The problem with that is that there is no "Page Setup" option on the File menu in the Unix version of Adobe Reader, only a "Print" option, which is where I already am.
If I open the PDFs in Evince, it allows me to add the custom page sizes I want, but as Evince doesn't have the option to print multiple pages per sheet I can't use it either...

Yes, it used to work, and the resize zoom bar used to work too (now its grayed out). I don't know if this is a "who's to blame for it" thing, but its not getting fixed and its pretty bad that no one seems to care enough even to respond. I found my own solution by opening it in Gimp. Just right click and select open with other ...Gimp and it will import into it. In the Gimp Print dialog, you have a scaling percentage in the "Page Setup" tab, and size settings in the "Image settings" plus loads of other stuff including multiple copies.

Help.... trying to set the browser title for reports called from 9i form

hello all
I am attempting to call a 9i report from an oracle 9i form .I am using the following code
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_type,CACHE);
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_DESFORMAT,pdf);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'sandy4');
v_rep := RUN_REPORT_OBJECT(repid,p1_id);
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://----.--------.com:8888/reports/rwservlet/getjobid'|| substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=sandy4,'_blank');
.. and so on
The reports RUNS FINE AND POPS UP AS A NEAT PDF internet explorer page !!!
I WAS WONDERING IF THERE IS ANYWAY TO SET THE BROWSER TITLE OF THIS REPORT THAT POPS UP..
DO I HAVE TO CHANGE SOME PROPERTY AT THE REPORT END
OR CAN I SET IT DYNAMICALLY BY PASSING AS A PARAMETER
FROM MY FORM
I HAVE SEARCHED EVERYWHERE FOR THIS
PL HELP
I WILL REALLY APPRECIATE IT IF SOMONE CUD HELP ME WITH
THIS
THANK YOU
SANDY

Hi,
It is possible to set the Document title for PDF output. Open the Reports Property Inspector, under PDF Document Taxonomy, you can set the Document title. But this does not show up in the browser when you open the document.
thanks,
Senthil

Regarding Database performance for report creation

Hi,
Currently i have one database in that two schema one for table data and second for reports creation.But it is taking more time to display data because there is more load on first schema.
I want to create second database for report schema .But i have to access table data from first database .
1) There is one option to fetch data from first database is through DB Link . But i think it also takes more time to fetch data.
Is there any way i can access data from first database and i get more performance with creating new database.
Kindly give me suggestion . What should i do to improve reports performance?

user647572 wrote:
Hi,
Currently i have one database in that two schema one for table data and second for reports creation.But it is taking more time to display data because there is more load on first schema.
I want to create second database for report schema .But i have to access table data from first database .
1) There is one option to fetch data from first database is through DB Link . But i think it also takes more time to fetch data.
Is there any way i can access data from first database and i get more performance with creating new database.
Kindly give me suggestion . What should i do to improve reports performance?You have more two options:
1. Use Oracle Streams and replicate tables between databases. WHile using reporting, you'll refer to the second database
2. Create Standby database, it's the clone of your database where you can update it by adding archived redo log files from primary database

Custom T codes for Report painter in FI

Hi All -
I have list of report painter reports (created thru GR31) and need to create custom transaction codes. I need information for following points:
1. How to create tcodes for report painter report
2. We have to transport those tcodes from DEV server to production and client numbers are different, will the transaction codes work when we promote to different server.
Thanks in advance.
Rds,
K

Hi,
Following are the Answers to your Queries.
1. Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].
2. Please refer to 5th chapter (Page 90) of this document for [Transporting the Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=3&ved=0CA0QFjAC&url=http%3A%2F%2Fwww.sapficoconsultant.com%2FBonus%2FReport%2520painter.pdf&ei=UiaYS8WOA5KylAei3830DA&usg=AFQjCNEHYqOFUd4XmZeX0JFt80OS-u7-mQ&sig2=dz40ldGpk_iyIRFR-yIxug].
Hope this helps.
Regards,
Chandravadan

10.6.6 - How to set custom view options for specific folders

How is it that Windows has had the ability to ability to set custom folder view options forever and OSX can't. What is the big deal? Just do it. Whenever I set the folder view options it changes the view for all the folders. I can do folder specific changes as long as the finder window is open then I close it and open it again every folder is the same again. It's just an annoyance and it's something so rudimentary it's embarrassing.

Try the following:
I want to have, say, one folder in list view
Open that folder, set it to list view, type command-J, and in the view-options window that opens, check the box at the top for "Always open in list view".
then the subfolder of that folder I want to have in cover flow view. permanently.
Open that folder, change it to cover-flow view, and in the view-options window check the box at the top for "Always open in cover-flow."
Those two folders should "remember" the custom views that were set for them.
There's additional discussion about the meaning of the"Use as defaults" button in this thread
http://discussions.apple.com/thread.jspa?messageID=13063792
My own take is that folders that have not been customized by checking the "Always open in xxx view" box will by default open in the same view (icon vs list vs column, etc) that was in effect for the previously opened folder. *Within each view*, you can set the default parameters (text size, etc) for a new folder by setting up a folder the way you like and then checking the view options box for "Use as defaults" at the bottom.

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set up the path for report in 10gAS?

I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?

Hello,
If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
For more details :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
and
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
Regards

How to set up the path for Report Server's output

I've had 9iAS on NT 4 platform with Service Pack 6.
By default, the Report Server's output goes to the
C:\Oracle\806\Bin
How can we change this setting ?
(in 6iserver.conf we don't have a variable for it.)
I'll appreciate any help.
Thanks.
Izabella.

Thanks for reply.
In my \Report60\Server\myrepsvr.ora I have :
cachedir="E:\Oracle\806\REPORT60\server\cache"
but when I call :
http://<host>:<port>/dev60cgi/Rwcgi60.exe?
report=myrep.rdf&destype=file&desformat=pdf
&paramform=no
the created pdf report doesn't go to the specified cashedir, but goes to the
C:\Oracle\806\Bin
How can I handle it ?
I'd like to see the pdf file in the cachedir,
not in Bin.
Izabella.

Set custom database userid for report schedules

Similar Messages

Maybe you are looking for