Set events parameter in oracle 11g for SAP

Hi All,
Recently we have upgraded 10.2.0.4 oracle database to 11.2.0.3 (AIX 7.1) for SAP application.
Some non-default event parameters were set when Database was running with 10.2.0.4 version. After upgrade to 11.2.0.3, those events were not seen in pfile/spfile. However, post_upgrade log shows that those events were set (and log displays the list of the events as well).
Now, my concern is whether those event parameters were set already by default (if it is already set after upgrade, not sure why pfile not reflecting them) or do I need to set the parameters manually.
Thanks in advance for all your help.
Regards,
Prakash

Yes, they seem to be part of the upgrade itself, and SAP seems to set them in multiple places:
1) During the dbua.sap.sh run, post-processing calls custom scripts which set these events (check the CustomScript.log in $ORACLE_BASE/cfgtoollogs/dbua/SID/upgrade1 and you can see where it is set)
2) The post_upgrade_status.sql script in $ORACLE_HOME/sap/ora_upgrade/post_upgrade sets them when you run it as directed after the upgrade
3) The SBP post-patch instructions specify a command to run that sets these in the spfile
I don't think any of the upgrade steps regenerate the pfile, so if you're looking at one you generated pre-upgrade (like I did earlier today to pull out underscore parameters and user/background_dump_dest) that you then used to startup the database, SAP is definitely changing stuff behind your back. I'd just regenerate the pfile to avoid confusion.

Similar Messages

ORA-12541: TNS:no listener, (error, in oracle 11g for window 7, 64 bit)

ORA-12541: TNS:no listener, error, in oracle 11g for window 7, 64 bit
While connecting as localhost is pretty well.
but command: sqlplus username@'192.168.52.178:1521/orcl' on the same machine is producing above mentioned error on oracle 11g for window 7, 64 bit.

user11225434 wrote:
Thax sir for your kind concern of my problem. Answers of your quaries regarding my question as follows
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 05-AUG-2013 09:37
:21
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                05-AUG-2013 09:31:09
Uptime                    0 days 0 hr. 6 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\eee\product\11.2.0\dbhome_5\network\admin\liste
ner.ora
Listener Log File         c:\app\eee\diag\tnslsnr\eee-THINK\listener\alert\log.x
ml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.52.170)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orclxe" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
Service "orclxeXDB" has 1 instance(s).
Instance "orclxe", status READY, has 1 handler(s) for this service...
The command completed successfully
# listener.ora Network Configuration File: C:\app\eee\product\11.2.0\dbhome_5\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\eee\product\11.2.0\dbhome_5)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\eee\product\11.2.0\dbhome_5\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.52.170)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\eee
3. My ip is static 192.168.52.170 and window 7 prof. is there.
4. Sir i have tested the remote connection with firewall configuration is off.
Hopefully this info is useful.
but command: sqlplus username@'192.168.52.178:1521/orcl'
NOTE the difference in IP#s above; 192.168.52.170 vs. 192.168.52.178

(Administration - Marketing - Import), you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in

Administration - Marketing -> Import, you can set a parameter value "Import mode" for what to do in case of duplication as "update existing records", "Import new records". The final report of this import is presented as a text file that can be viewed in Business Administration - Marketing -> Import -> Exceptions. Whatever the exception, including duplication import occurs during import and recorded in a text file. What are the fields that determine the duplicity? How I can I can change those?

You will be returned anything that is in the option's value parameter. What is displayed in the dropdown and what is put in the value attribute do NOT need to be the same, so maybe you should start there.

Oracle 11g for production

Hi,
I have download oracle 11g for linux.
We have one to create a new database for one of our production system.
Shall I create the database on 11g or wait for some time.(we have tested the application on 10g)
Regards
MMU

Hans and I seem to be giving the same advice here.
The point I was trying to make was to be careful.
There are probably more important things to consider
rather than acting on the urge for the latest and
greatest technology piece.Yes. Perhaps different phrases meaning the same thing help a person understand better,.
After all, the biggest part of an upgrade process is 'understanding risk' and the biggest part of the DBAs job in production is 'mitigating risk'. For Risk Management, the more perspectives, the better.
That is really our job in a nutshell. And that may be why we often have challenges with developer's - their job is to get new capabilities and due to their time pressures they may not be looking at risks the same way. (Just look at how much exception handling the typical developer does.)
Message was edited by: Hans Forbrich
Years ago, a sales rep with whom I worked said "If you want to understand how a person behaves, ask how they are compensated."

When is Oracle Adapter for SAP 10.1.2.0.2 released?

Hi,
I'm desperately waiting for the release of the Oracle Adapter for SAP
10.1.2.0.2. It is stated as Projected on the Download site.
I do still have serious problems with bug 2574376. This bug was fixed already
in July 2004. In that bug is stated that it is fixed in 10.1.2.
I am using the workaround to kill the process. But when I kill the process while the
adapter is processing data for update in SAP, I am losing that data. So the
update does not take place in SAP and the data is not in the persistence
anymore.
So please release this version!
Regards,
Aard-Jan

Yes, but not for HPUX jet. And that is what I need.
Via Metalink I heard that it will be available around august.

Oracle Adapter for SAP that supports Integration with SAP 6.0??

Hi,
I am working currently with Oracle Adapter for SAP with SAP 4.6.
But my company is looking for upgrading the Enterprise SAP system to 6.0.
Do we have Oracle Adapter for SAP that supports SAP 6.0? Please let me know if anyone has already worked on this?
Thanks,
Sasi Bhushan

Sasi,
There is a new MySAP adapter with 10.13.1 and above to support ECC 6.0. Please see the following section in the 10.1.3.1 adapter release notes:
12.4.1 MySAP ERP Versions and APIs
The following MySAP ERP platforms are supported by OracleAS Adapter for MySAP
ERP:
■ SAP R/3 Enterprise 47x100
■ SAP R/3 Enterprise 47x200
■ MySAP ERP Central Component (ECC) 5.0, deployed on SAP NetWeaver 2004
■ MySAP ERP Central Component (ECC) 6.0, deployed on SAP NetWeaver 2004s
■ SAP Java Connector (SAP JCo) Version 2.18.
For the current release status of the SAP Java Connector, refer to SAP Note #549268
in the SAP Service Marketplace.
Release versions may vary by product component. In addition, SAP functions may
vary by SAP product version and support package.
Note: The OracleAS Adapter for MySAP ERP supports only the versions listed above.
It is not recommended to use the OracleAS Adapter for MySAP ERP with older
versions of SAP R/3. If you plan to use the adapter with older versions of SAP R/3 for
example SAP R/3 4.6C, prior approval from iWay Software Product Management is
required.

Oracle 11g for Visual Studio 2008

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQL*NET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.

Excellent test case, may by you should raise an SR and hope it ends up as a bug.
What happens if you "ping box01.data.local" what IP Address do you get back? You should be looking to get back the loopback address.
What happens if you do a nslookup 192.168.30.64 and 192.168.1.100?
Have you tred setting ORACLE_HOSTNAME? Not sure if this is just for the installer or not.

Setting TNS_ADMIN parameter in OBIEE 11G

Hi Gurus,
I have done simple install on Linux 64 bit Machine, i need to setup TNSNAMES.ORA file. I have copied my tnsnamesora file to:
1. <MIDDLEWARE_HOME>\Oracle_BI1\network\admin
2. <MIDDLEWARE_HOME>\oracle_common\network\admin
and now in user.sh file taken from <MIDDLEWARE_HOME>\instances\domain2\bifoundation\OracleBIApplication\coreapplication\setup, i need to update the tnsnames.ora path in TNS_ADMIN variable, when i opened the user.sh file, i found all the lines in the file commented, please help me out in which line i need to add the path for TNS_ADMIN.
#!/bin/sh
# Following are the examples of configuring Oracle and DB2 UDB
# clients on various Unix and Linux Operating Systems.
# Please follow the examples, and update this file appropriately
# as per your locations so that Oracle BI Server can locate the
# Database Clients.
# Section 1 Contains examples for Oracle BI in 32 bit mode, and
# in order for BI Server 32 Bit to communicate, the DB Client
# should also be 32 bit
# Section 2 Contains examples for Oracle BI in 64 bit mode, and
# in order for BI Server 64 Bit to communicate, the DB Client
# should also be 64 bit
# IMPORTANT! Do not use the command "set -u" in the script below
# as it prevents the Oracle BI scripts to run properly.
# Section 1
# Solaris: Oracle BI 32 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$LD_LIBRARY_PATH:/opt/j2se/jre/lib/sparc
#export LD_LIBRARY_PATH
# DB2 Parameters
# make sure the /DB2ISTANCE/sqllib/lib points to 32 lib file
#. /DB2INSTANCE/sqllib/db2profile
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ARBORPATH/bin
#export LD_LIBRARY_PATH
# Linux: Oracle BI 32 bit mode
#set +u
# Oracle Parameters
# Make sure that Oracle DB 32 bit Client is installed
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
#export LD_LIBRARY_PATH
# If you have Linux 64 bit Platform, and would like to run Oracle BI 32 bit
# then you must install Oracle DB 64 bit client, and this client comes with
# 32 bit libraries under $ORACLE_HOME/lib32. The LD_LIBRARY_PATH in this case
# shall be like this:
#LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$LD_LIBRARY_PATH
#export LD_LIBRARY_PATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 32 lib file
#. /DB2ISTANCE/sqllib/db2profile
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$ARBORPATH/bin
#export LD_LIBRARY_PATH
# HPUX PA-RISC: Oracle BI 32 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#SHLIB_PATH=$ORACLE_HOME/lib32:$SHLIB_PATH:/opt/j2se/jre/lib/hp700
#export SHLIB_PATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 32 lib file
#. /DB2ISTANCE/sqllib/db2profile
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#SHLIB_PATH=$SHLIB_PATH:$ARBORPATH/bin
#export SHLIB_PATH
# HPUX Itanium: Oracle BI 32 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#SHLIB_PATH=$ORACLE_HOME/lib32:$SHLIB_PATH:/opt/j2se/jre/lib/hp700
#export SHLIB_PATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 32 lib file
#. /DB2ISTANCE/sqllib/db2profile
# AIX: Oracle BI 32 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#LIBPATH=$ORACLE_HOME/lib32:$LIBPATH:/opt/j2se/jre/lib/sparc
#export LIBPATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 32 lib file
#. /DB2ISTANCE/sqllib/db2profile
# RPAS Parameters
#OA_ROOT=/export/home/rpas/odbcclient
#export OA_ROOT
#OPENRDA_INI=$OA_ROOT/config/raix/openrda.ini
#export OPENRDA_INI
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#LIBPATH=$LIBPATH:$ARBORPATH/bin
#export LIBPATH
# Section 2:
# Solaris: Oracle BI 64 bit mode
#set +u
# Oracle Parameters
# Make sure to install Oracle DB 64 bit Client
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#LD_LIBRARY_PATH_64=$ORACLE_HOME/lib:$LD_LIBRARY_PATH_64:/opt/j2se/jre/lib/sparc
#export LD_LIBRARY_PATH_64
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 64 lib file
#. /DB2ISTANCE/sqllib/db2profile
#LD_LIBRARY_PATH_64=/DB2ISTANCE/sqllib/lib:$LD_LIBRARY_PATH_64
#export LD_LIBRARY_PATH_64
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#LD_LIBRARY_PATH_64=$LD_LIBRARY_PATH_64:$ARBORPATH/bin
#export LD_LIBRARY_PATH_64
# HPUX Itanium: Oracle BI 64 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#SHLIB_PATH=$ORACLE_HOME/lib:$SHLIB_PATH:/opt/j2se/jre/lib/hp700
#export SHLIB_PATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 64 lib file
#. /DB2ISTANCE/sqllib/db2profile
#SHLIB_PATH=/DB2ISTANCE/sqllib/lib:$SHLIB_PATH
#export SHLIB_PATH
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#SHLIB_PATH=$SHLIB_PATH:$ARBORPATH/bin
#export SHLIB_PATH
#ESSLANG=English_UnitedStates.UTF-8@Binary
#export ESSLANG
#LANG=en_US.utf8
#export LANG
# AIX: Oracle BI 64 bit mode
#set +u
# Oracle Parameters
#ORACLE_HOME=/export/home/oracle/10g
#export ORACLE_HOME
#TNS_ADMIN=$ORACLE_HOME/network/admin
#export TNS_ADMIN
#PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
#export PATH
#LIBPATH=$ORACLE_HOME/lib:$LIBPATH:/opt/j2se/jre/lib/sparc
#export LIBPATH
# DB2 Parameters
#make sure the /DB2ISTANCE/sqllib/lib points to 64 lib file
#. /DB2ISTANCE/sqllib/db2profile
# Essbase Parameters
#ARBORPATH=/export/home/Hyperion/AnalyticServicesClient
#export ARBORPATH
#LIBPATH=$LIBPATH:$ARBORPATH/bin
#export LIBPATH
Thanks,
Sree

Hi Kalyan,
i referred this blog for adding tns entries for OBIEE 11g, for windows users.cmd has only one TNS_ADMIN, but in users.sh file there are many TNS_ADMIN and moreover all are are commented out, so i am not sure where and to what i should assign the path.
Thanks,
Sree

Recommended Oracle version for SAP 4.7 and for BW 3.5

Hi,
where I can find the SAP's recommended version of Oracle for SAP ERP 4.7 and BW 3.5?
Thanks
Message was edited by:
giovanni maria maccioni

Hi,
Recommended would be 10.2.0.2
Oracle has ended the customer care support for 9.2 in July 2007:
Note 925871 - Discontinuation of 'Customer Care Support' for Oracle 9.2
At the same time, SAP customers have a "free" year of Extended Support for Version 9.2.
9.2.0.8 is the latest patch set provided for 9.2. (see note 1021844)
I think that, if you are planning to perform a new installation, it would be better to do it in 10.2

Oracle 11g for WinXP VirtualMachine install problem

Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?

957717 wrote:
Hi!
I have problem with installation Oracle 11g x32 on WinXP x32 which was installed into VMWare Player
When my installation goes to 60% i have an error em.ear file not found...
I looking for many issues on this forum, but i can't fix this error (i have been unzipped all 2 archives in the same folder, i have deleted all files in temp folders...), but i can't pass the oracle install test... all test is filed, but i ignor this screen, because i know, that all is right... so can any one help me with installation?What is the full path name to the directory where unzipped the files?
Do a system 'find' and locate 'em.ear'. What is the full path name to it? At acommand prompt, enter the following:
cd \
dir /s em.earcopy the entire session -- command and results, and paste back here.
Also, does the path to the installation files contain any spaces? Does the path to the installed ORACLE_HOME contain any spaces?
You have my condolences for having to work with Windows. To paraphrase a line from a popular movie . . "My momma always said Windows was like a box of chocolates."
Edited by: EdStevens on Sep 7, 2012 3:42 PM

Oracle 11g for Visual Studio 2008 errors

I installed llg four(4) times and get the same result: I can't get a Data Connection!!! There is no other Oracle version on this computer and I've cleaned up the registry on all four installs. In order to run SQLNET you must first have a Data Connection! Can someone that has experience with Visual Studio and Oracle 11g installation please tell me what I'm doing wrong? HELP! PLEASE, email me directly at: [email protected] Thanks. Any documentation would be helpful.
Edited by: lam5158 on Sep 23, 2009 3:38 PM

Sorry, you are right and it's my fault. Thanks for the tip. I saw the versions listed when I did the install, but I didn't realize I needed to select any because I thought it would install automatically for whichever VS versions you had installed.
Thanks again! :)

Oracle 11g for Oracle access manager, OID version details

At present we have 1og db for sso and oid. I have checking in db that our exsisting OID and SSO versions are
Oracle9iAS Single Sign-On 10.1.2.0.2
Oracle9iAS Internet Directory
OID 10.1.2.1.0
We are moving to diff hosting solution and vendor is recommanding to have 11g Oracle access manager(in 11g sso is replaced by OAM) and OID.
What is the version of OID with 11g or please refer me to the documentaion where i can greb 11g OAM, oid etc versions

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for windows7 home basic 64bit version

Where can i find oracle 11g server for windows7 home basic 64bit version...

Kapardhi wrote:
Where can i find oracle 11g server for windows7 home basic 64bit version...Oracle 11gR2 is certified on Windows 7 x64 - Professional, Enterprise, and Ultimate editions -- http://docs.oracle.com/cd/E11882_01/install.112/e24283/toc.htm#BGBEEBAD
You can download 11gR2 from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Thanks,
Hussein

Oracle 11g for Ubuntu ?

Hi,
Is Oracle 11g supported on Ubuntu ? which flavor ?
If not, which is the standard Linux distribution Oracle considers fit for Oracle 11g ?
regards
raghav..

See http://www.oracle.com/technology/support/metalink/index.html

Oracle 11g for Linux PC Download

I just downloaded Oracle 11g R1 for LINUX from this OTN site. Do I also get the Enterprise Manager?

Hi,
You can download Oracle Enterprise Manager 11g from:
Oracle Enterprise Manager Downloads
http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
Thanks,
Hussein

Set events parameter in oracle 11g for SAP

Similar Messages

Maybe you are looking for