Set Methods are not running

I am writing my first jsp. I have a bean that I am wanting to use and my understanding is that if I put the following commands in, that all the set methods for my properties will run in the bean automatically as long as the names of the properties are the same as those on the form.
<jsp:useBean id="MedicalBean" class="Project5.MedicalReimbursementRecord" scope="session"/>
<jsp:setProperty name="MedicalBean" property="*"/>
The form has a number of textboxes, each text box has a name of one of the properties in my bean. I put display in my bean and I know that it is never running any of the "set" methods for any of the properties. I know that it is indeed getting into my bean, as I have displayed which indicate that methods that I request are indeed running.
I have not "ACTION" parameter on the FORM, but I have looked at the examples in Tomcat and they have forms which do not have an "Action". I don't think this is a problem, but maybe I am wrong about that. If I put in the statement of:
<jsp:setProperty name="MedicalBean" property="GrpAcctNbr"/>
Then I get the error "Cannot find any information on property 'GrpAcctMbr' in a bean of type 'Project5.MedicalReimbursementRecord'"
So there must be something wrong with my setProperty statement, but what is it?
Thanks in advance for your assistance.

Can you show the relevant JSP code and set/get methods in the bean?
Sometimes this error is caused by capitalization. e.g. a request param of "myName" calls setMyName(). Also, your bean must have a no arguments constructor.
Also, if you don't specify an action,the form submits to the current URL so you should be ok. Are you sure that the JSP runs when the user submits the form?

Similar Messages

Scheduled jobs are not running DPM 2012 R2

Hi,
Recently upgraded my dpm 2012 sp1 to 2012 R2 and upgrade went well but i got 'Connection to the DPM service has been lost.(event id:917 and other event ids in the eventlog errors ike '999,997)'. Few dpm backups are success and most of the dpm backups consistenancy
checks are failed.
After investigating the log files and found two SQL server services running in the dpm 2012 r2 server those are 'sql server 2010 & sql server 2012 'service. Then i stopped sql 2010 server service and started only sql server 2012 service using (.\MICROSOFT$DPM$Acct).
Now 'dpm console issue has gone (event id:917) but new issue ocurred 'all the scheduled job are not running' but manully i can able to run all backup without any issues. i am getting below mentioned event log errors
Log Name: Application
Source: SQLAgent$MSDPM2012
Date: 7/20/2014 4:00:01 AM
Event ID: 208
Task Category: Job Engine
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
SQL Server Scheduled Job '7531f5a5-96a9-4f75-97fe-4008ad3c70a8' (0xD873C2CCAF984A4BB6C18484169007A6) - Status: Failed - Invoked on: 2014-07-20 04:00:00 - Message: The job failed. The Job was invoked by Schedule 443 (Schedule 1). The last step to
run was step 1 (Default JobStep).
Description:
Fault bucket , type 0
Event Name: DPMException
Response: Not available
Cab Id: 0
Problem signature:
P1: TriggerJob
P2: 4.2.1205.0
P3: TriggerJob.exe
P4: 4.2.1205.0
P5: System.UnauthorizedAccessException
P6: System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal
P7: 33431035
P8:
P9:
P10:
Log Name: Application
Source: MSDPM
Date: 7/20/2014 4:00:01 AM
Event ID: 976
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer:
Description:
The description for Event ID 976 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The DPM job failed because it could not contact the DPM engine.
Problem Details:
<JobTriggerFailed><__System><ID>9</ID><Seq>0</Seq><TimeCreated>7/20/2014 8:00:01 AM</TimeCreated><Source>TriggerJob.cs</Source><Line>76</Line><HasError>True</HasError></__System><Tags><JobSchedule
/></Tags></JobTriggerFailed>
the message resource is present but the message is not found in the string/message table
plz help me to resolve this error.
jacob

Hi,
i would try to reinstall DPM
Backup DB
uninstall DPM
Install DPM same Version like before
restore DPM DB
run dpmsync.exe -sync
finished
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
Please send me the solution on urgent.
Thanks.
Shahzad

Hi Paul,
We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
The command for SQL Server 2012 is:
mofcomp.exe “C:\Program
Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
folders>
DTS
SDK
Tools
srkr

Mail or File Adapter are not running without SLD

Hi,
is it correct, that all adapters on java stack are not running while where is no connection to SLD? (Idoc and http are working because they run in abap stack)
We have just one SLD (no replicated SLD) for our PI 7.0 and we can see, that mail or file adapter are getting errors if the sld instance is down.
What can we do to avoid this behaviour because the admins wanna patch the SolMan and the SLD is running there.
Is it possible to run the integration engine without SLD?
Thanx a lot
Wolfgang

We have just one SLD (no replicated SLD) for our PI 7.0 and we can see, that mail or file adapter are getting errors if the sld instance is down.
SLD lookups are made at various levels of message excution. When message pass from Adapter Engine to Inetgration Engine, SLD lookups helps in identifying the correct address of IE. Therefore it will always affect the java (AE) based adapters.
What can we do to avoid this behaviour because the admins wanna patch the SolMan and the SLD is running there.
Its better not to try avoiding this standard behavior.
For your patching requirement, you must perform it when the message traffic is low e.g. during weekends. Usually everywhere such patching and upgrade are done on weekends as the downtime is acceptable in that duration.
Regards,
Prateek

Please i need help the forms are not running

the forms are not running by internet exp and i am trying all of things , then i am working now with Firefox and the problem still running and the error is additional plugins are required to display all the media in this page
what can i do to running forms correct
Message was edited by:
user616145

i could not understand ur prob. clearly. U run form from application server or just using oracle oc4J of oracle 10gDS in ur local machine? When u run ur form what kind of error u see?
- tkarim

Scheduled Brio/IR Jobs are not running as expected in EPM 11.1.2.2

Hi All,
We are observing some scheduled jobs are not running as expected,they are not running on the scheduled time.
Given below are more details.
We have 2 Jobs running at 6:00 AM daily based on single Recurring Time Event and it is observed that this jobs are not running on time(ex: 6:06 AM EST).
I tried verifying Consolidate Job Status in workspace admin options and the v8_RecurtimeEvent table for any miss in the 'Next Run Time',
but they were having the scheduled date/time of run.No clue from EPM Logs.
Interesting observation is the same jobs are running after updating the schedule time a little bit further(ex: 6:06 AM to 6:07 AM),but again after some days
the updated job(6:07 AM ) will stop running.
Thanks,

Put the IR job logs in TRACE:32 mode which will give more information in the logs . Refer this document link to put in TRACE mode :http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_1112200.pdf
Thanks,
KK

Jobs in oracle are not running properly -

Hi
In my database i have some 10 jobs and they are running successfully but the next date is not getting updated to athe new interval. Because of that the jobs are not running furhter.
Is there any solution for this
Oracle 9.2.0.6
O/S linux
Rp

RAJ> @JOBS2
scheduled jobs
Last This Next Run
WHAT LOG_USER Job B fail Date Date Date Interval
DQ_UPDATION; DOTSOFT 124 N 0 11-NOV-08: 15:59:35 : 16-NOV-08: 15:59:35 5.00
P_SEND_PG_MAILS; DOTSOFT 250 N 0 14-NOV-08: 02:00:03 : 15-NOV-08: 02:00:00 1.00
PLRANL; DOTSOFT 83 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
P_MAIL_DIS; DOTSOFT 492 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRSJOBS; DOTSOFT 106 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
bill_net_os_details_proc; DOTSOFT 24 N 0 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
FRS_REPEAT_UPDT; DOTSOFT 674 N 0 14-NOV-08: 07:00:03 : 14-NOV-08: 15:00:00 .33
FRS_REPEAT_FAULT_UPDT; DOTSOFT 675 N 0 14-NOV-08: 07:00:05 : 14-NOV-08: 15:00:00 .33
portal_application; DOTSOFT 692 N 0 14-NOV-08: 07:02:01 : 14-NOV-08: 08:02:01 .04
an_printpack.an_process(sysdat DOTSOFT 532 N 0 14-NOV-08: 06:35:40 : 14-NOV-08: 07:05:40 .02
e-1,sysdate, 'DOTSOFT', 'D');
MONTHCRON; DOTSOFT 164 N 0 11-NOV-08: 15:59:35 : 11-DEC-08: 00:00:00 29.33
npc_scan_job; DOTSOFT 392 N 11 14-NOV-08: 00:00:03 : 15-NOV-08: 00:00:00 1.00
RECON_ALLPAID_PKG.RECON_ALLPAI DOTSOFT 228 N : : 18-NOV-08: 16:48:15
D;

OID is up & running but "ldap" process are not running

Hi all,
Oracle Internet Directory is up & running but LDAP processes ( Not Running ---- Process oidmon
Not Running ---- Process oidldapd
Not Running ---- Process oidrepld
Not Running ---- Process odisrv) are not running.
I am trying to configure SSO for reverse proxy server and ran the command ssocfg.sh https proxyServerName proxyServerPort
and when i am trying to go for next step that is ldapmodify -D cn=orcladmin -w welcome1 -v -f setdasurl.ldif
it is showing up cannot connect to LDAP server. and also when i am trying to acess SSO admin Server the redirection url is showing up with 404 page not found error.
pls help me
Thanks

Do 'oidctl status' and check if the 'oidldapd' is up and running. If not, start 'oidmon' by executing the command 'oidmon start'.
To start 'oidldapd', use 'oidctl' command.
Eg: oidctl connect=<sid_name> server=oidldapd instance=<instance_num> start
Sometimes, when you start 'oidmon', the 'oidldapd' process is also started. So, its a good idea to do 'oidctl status' after 'oidmon start'

Golden gate extract and replicate process are not running.

All,
I am trying replicate data between two oracle databases using golden gate.
I am trying this scenario in a single machine(two databases and golden gate are on same windows machine)
1. I have two databases PROD, UAT both are running on 11.2 oracle home.
2. Created the ggate user both the databases, and enabled supplemental logging.
3. Ran the following scripts in both databases.
SQL> @marker_setup.sql
SQL> @ddl_setup.sql
SQL> @role_setup.sql
SQL> grant GGS_GGSUSER_ROLE to ggate;
SQL> @ddl_enable.sql
4. Connected the source database (PROD) in ggsci prompt
GGSCI (home-c07402bbc5) 79> add extract ext1, tranlog, begin now
add exttrail C:\app\Bhanu\Goldengate\lt, extract ext1
edit params ext1
EXTRACT ext1
USERID ggate@PROD, PASSWORD 123456
RMTHOST home-c07402bbc5, MGRPORT 7840
rmttrail C:\app\Bhanu\Goldengate\lt
ddl include mapped objname bhanu.* // bhanu is a schema in PROD database.
TABLE bhanu.*;
5. Connected the target database(UAT) in ggsci prompt
add checkpointtable ggate.checkpoint
edit params ./GLOBALS
GGSCHEMA ggate
CHECKPOINTTABLE ggate.checkpoint
add replicat rep1, exttrail C:\app\Bhanu\Goldengate\Mt,checkpointtable ggate.checkpoint
edit params rep1
replicat rep1
ASSUMETARGETDEFS
userid ggate@UAT, password 123456
discardfile C:\app\Bhanu\Goldengate\rep1_discard.txt, append, megabytes 10
map bhanu.*, target kiran.*;
After that started the extract, replicat using
start extract ext1, start replicate rep1
Now the status.
GGSCI (home-c07402bbc5) 103> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 00:11:43
REPLICAT STOPPED REP1 00:00:00 00:21:16
Can you please help me what is wrong in my setup and why extract and replicate process are not running.
Edited by: user12178861 on Nov 19, 2011 11:22 AM

Thanks for your quick reply.
I have done few changes but extract, replicate process not running.
couple of points I would like to share with you regarding my setup.
1. I am using single golden date instance to replicate the data between PROD and UAT databases.
2. GGSCI (home-c07402bbc5) 1> dblogin userid ggate@PROD,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 2> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:23:29
REPLICAT STOPPED REP1 00:00:00 01:33:02
GGSCI (home-c07402bbc5) 3> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 4> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 5> VIEW REPORT EXT1
ERROR: REPORT file EXT1 does not exist.
GGSCI (home-c07402bbc5) 6> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:24:10
REPLICAT STOPPED REP1 00:00:00 01:33:44
Target :
GGSCI (home-c07402bbc5) 1> dblogin ggate@UAT,PASSWORD 123456
ERROR: Unrecognized parameter (GGATE@UAT), expected USERID.
GGSCI (home-c07402bbc5) 2> dblogin userid ggate@UAT,PASSWORD 123456
Successfully logged into database.
GGSCI (home-c07402bbc5) 5> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
ERROR: REPLICAT REP1 already exists.
GGSCI (home-c07402bbc5) 6> delete replicat rep1
Deleted REPLICAT REP1.
GGSCI (home-c07402bbc5) 7> add replicat rep1, exttrail C:\app\Bhanu\Goldengate/lt,checkpointtable ggate.checkpoint
REPLICAT added.
GGSCI (home-c07402bbc5) 8> edit params rep1
GGSCI (home-c07402bbc5) 9> start er *
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REP1 starting
GGSCI (home-c07402bbc5) 10> info all
Program Status Group Lag Time Since Chkpt
MANAGER RUNNING
EXTRACT STOPPED EXT1 00:00:00 01:29:46
REPLICAT STOPPED REP1 00:00:00 00:00:48
3. Is mandatory that I need two golden gate instances running each side ?
Thanks for spending your time on this problem.

Hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help

Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not

Why addcomponent and removecomponent method are not in component class,

Hi,
why addcomponent and removecomponent method are not in component oand component class,
Thank you

java.awt.Container has the appropriate add and remove methods:
http://java.sun.com/javase/6/docs/api/java/awt/Container.html
If that seems odd to you, you need to think about the Composite Pattern:
http://en.wikipedia.org/wiki/Composite_pattern
[url #" style="display: block; background-image: url('http://upload.wikimedia.org/wikipedia/en/1/13/Compositepattern.png'); width: 406px; height: 271px]

Pre defined set types are not determined in CAtegory

Hi all,
when i try to create a category for a service product for SLA, the pre defined set types are not getting populated for me.
I have created a new hierarchy, assigned to product and product type.....
but still when i create a category the list of predefined some of the predefined set types are not getting displayed.
Can anyone help this issue.
kindly advice in this regard.
Thanks,
Subhashini.

Hi,
Thanks for the reply.
I have assigned the product type service in the category.
This is the only custom category available. only one std category has this set types. other than that nothing is there in the system.
is there any services that has to be activated or any authorization that is missing for me...
nut i have sap_all...could not able to trace out the problem.
kindly guide.
thanks,
Subhashini.

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

Adobe CC applications are not running on Microsoft mandatory profile.

Good night,
We are conducting some profiles of tests in our environment and including the mandatory profile (Microsoft).
An issue that profile with adobe DC applications we have installed (Photoshop, Illustrator, InDesing, Premier, Flash etc.), when I run these applications on the mandatory profile runtime error occurs, the program opens with an error message.
Even setting the user who has the mandatory profile as Administrator, the machine, the applications open with runtime error.
When I run the same programs on the same machine with normal profile (without administrative rights), applications run normally
Thank you.
Marcelo Leite

Thank you for the feedback Marecelo Leite. Mandatory profiles are not currently supported by Adobe Creative applications.

PPR - Additional attributes on existing Set type are not displayed.

Hi Expert,
I have requirement to add some fields to Product to display in PPR product tab. I have added attributes to existing Set type which is already configured to display on PPR - Product tab. After adding the new attributes, I regenerated Set type but still in CRMM_PPR I don't see these new fields although the existing attributes of set type are on screen.
Any idea what I am missing?
Thanks,
Cheers,

Can you show the relevant JSP code and set/get methods in the bean?
Sometimes this error is caused by capitalization. e.g. a request param of "myName" calls setMyName(). Also, your bean must have a no arguments constructor.
Also, if you don't specify an action,the form submits to the current URL so you should be ok. Are you sure that the JSP runs when the user submits the form?

Set Methods are not running

Similar Messages

Maybe you are looking for