Set object to precence = 'visible' both in screen and print modes

Hi folks,
In my form, I have a check box which toggle visabillity of some table object.
i'm using 'visible' and 'hidden' values in the presence propery for the toggling.
It's all work fine except when i'm printing the form - the "visible" table is not printed.
How can I make it visible also for print mode?
Yair

If the table is visible, then it should print unless you have done one of the below..
1) Setting the presence property of the table to visible(Screen Only)
2) write code in prePrint event to hide the table.
If you have not done any of the above then try placing the code in the prePrint event to make the Table visible.
     You can place in the CheckBox prePrint event with JavaScript as language.
     //Check if the Check box is checked.
     if(CheckBox1.rawValue =="1")
          Table1.presence = "visible";
Thanks
Srini

Similar Messages

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

Firefox 18.0.1 consuming excessive CPU--both in Standard and Safe Mode--when accessing Gmail

Firefox 18.0.1 consumes excessive CPU--both in Standard and Safe Modes--when accessing Gmail (in Standard Mode). CPU consumption averages around 56% on my dual-CPU, Windows 7 desktop.
The only way to stop this from happening it to open Gmail in "HTML" mode. When I open Gmail in Standard mode, a "Loading..." status shows at the top of the page. After about 30 seconds, a error window pops-up within the Gmail page saying that there is a performance problem and provides the option to load Gmail in a limited, "HTML" mode. Clicking the HTML Mode link solves the issue. I've been using Firefox for years and have never seen this issue until now.

try this link
*https://support.mozilla.org/en-US/kb/firefox-uses-too-many-cpu-resources-how-fix

At odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

at odd times I will get a second instance of Firefox startup. I have run avast av, spybot, malwarebytes, both in normal and safe mode and nothing has been found, any ideas?

That second one sounds like malware.
Do a malware check with some malware scanning programs on the Windows computer. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Is it possible to create a PDF with different colors for screen and printing?

I'm working on a document that features light colored text on a dark background. I'll be sending this document as a PDF to someone who will likely want to print it. Is it possible to set up the document such that it will display this way when viewed on screen, but will print as black text on a white background, without requiring any special action on the part of the recipient?
Printing a color separation of just the text color produces exactly the results I'm after, but I can't ask the recipient to do that. I need it to happen automatically any time it's printed.
I've tried setting up a duplicate text layer in black and placing it under the background layer, then setting the background layer and colored text to 'never print'. This works within Acrobat Pro, but not when I print the same document from Preview.
Is there an acrobat equivalent of a CSS print stylesheet?
Thanks.

Create the document in layers with the background on a seperate layer than the text. Export the PDF with"Create Acrobat Layers" selected (it will need to be at least version 1.5).
Open the PDF in Acrobat, choose the background layer then Options>Properties>Initial State and under "print" choose "Never prints".

Color coordination between screen and Printer

When I print, the bright, beautiful picture on the screen prints as a dark, dull picture. I would like the printed picture to be the same as what I see on the screen. For your information: my OS is Windows 7 Premium. I use Photo Elements version 10. My printer is a Canon PIXMA Model MG5220. I have tried changing software and printer settings, but to no avail. How do I solve this problem?

Open the picture file
Go to Enhance>Adjust Lighting>Levels. Use the white eye dropper to set the white point. The other eye droppers are for black and gray points.
Here is a good reference:
http://www.photoshopessentials.com/photo-editing/elements/tone-color/
Sometimes the effect is amazing. It is interesting that the eye droppers are not in the levels adjustment layer.
This may help as well:
http://help.adobe.com/en_US/PhotoshopElements/8.0/Win/Using//WSBB926D32-48DE-471f-8786-921 0E0A1F2DE_WIN.html

Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
What is the best solution in order to resolve these issues?
Your help is greatly appreciated.

Did you run Disk Utility>First Aid? If so what were the results? This is a copy of mine, note that the bottom line says: The partition map appears to be OK:
Ciao.

IPod Touch hangs with blue screen and restore mode also fails

My daughter's iTouch 3G crashed last night while she was playing a game came up with a blue/green screen and couldn't turn off. Tried reboot which brought it back to Apple Logo where it stayed for about 10mins. Then tried restore. Managed to get as far as connecting it to iMac and going through restore process to "restoring iPod software" until that hangs too - with "iPod couldn't be restored Unknown Error 1603". Tried again with Error 9.
Have followed troubleshooter - have latest itunes, USB settings, firewall etc. Works fine with my iPhone.
Any ideas or is the iTouch screwed?

Common, no one has any ideas? Well, don't know if this will help, but here's some new data to process. I noticed that when I was trying to load the firmware with Redsnow w/o installing any options to include Cydia I got errors displayed on the Ipod such as WMR NAND format invalid; NANDLegacyFTL failed. Someone has got to know something. I would appreciate any ideas or thoughts from anyone with any idea. Thanks

HT1349 Need Help. Grey Screen and Safe Mode Problems

I had to pull a hard shut down on my mac and when I tried to start it up I get the apple grey screen and the rotating circle and it just stays there. Tried to boot in safe mode, says:
can't find root user. Sleeping and trying again
can't read user-specified hostname
disk0s2: 0xe0030005 (UNDEFINED).
I don't have the start up disks, what do I do?

You are very welcome Ghoss! Thank you for using the Support forums
If you continue to have problems with the volume button do not hesitate to contact your support center. You can verify your warranty status here.
Thank you for being a part of the Lenovo Family,
Catie
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Donate KUDOS and Click "Accepted Solution"

Setting objects on not visible rows

Hi there,
I'm building a TreeTable (on the 1st column a tree, n the 2nd one some checkboxes, and on all the others some statistics collected from the tree). Particularly, the seconf column allows to select a bunch of tree nodes for later treatments.
Say all the tree is not expanded and I check a node that has some of its descendant childs node not visibles (parent not currently expanded). I'd like my program to automatically check all descendant childs nodes of the currently being check node - INCLUDED all childs that are not visible.
In my cellEditor (I can use "row" as the only information to get the right node), I currently have that kind of ugly code to do so:
public Component getTableCellEditorComponent(JTable table, Object value, boolean isSelected, int row, int column) {
        CTestTreeNodeData testTreeNodeData = (CTestTreeNodeData) sortTreeTable.getValueAt(row, 0); // get the tree node -> column=0
    short newState = computeNewState(testTreeNodeData.getState()); // compute the new state ("checked" or "not checked")
t    estTreeNodeData.setState(newState); // set this new value on the model
switch (newState) {
     case CThreeStateCheckboxModel.SELECTED:
     case CThreeStateCheckboxModel.PARTIALLY_SELECTED:
               // need to do this in this order to get correctly the rows
               mainFrame.expandNodeAll(row); // first expand of descendant childs !!!!
               mainFrame.checkNodeAll(row, newState); // check all childs from current row (this code is incrementing row, then verify from the new treepath to see if it's a descendant or not and redo it recursively
               mainFrame.collpaseNode(row); // HACK !!!! restore how it was before
               break;
      return defaultCellEditor.getTableCellEditorComponent(table, threeStateCheckbox, isSelected, row, column);which looks very bad for me... Is there a better solution to change data on some currently hidden nodes if we have only the row has input ?
Thx,
Eg\\*

Hi Namsheed,
I think this is normal because the travel request does not include any booking details.
The travel request is before any online bookings.
So might be it would help to explain in detail your process and used components.
Best regards,
Sigi

How to set the fields invisible/visible dynamically with screen-exits

Goal: I am changing the subscreen from standard screen for mobile device interface, i.e. function group LMOB. With a scanner I am to read a material number and have it confirmed by the SAP system. For this I need an input field which is already supplied by the standard program. The users require the screen to be dynamic, i.e. I can not do the settings in the screen-painter.
Problem occurred: After I have changed to use the customized subscreen 1202 in function group XLRF, not all the fields are displayed. It seems that the values for setting the screen elements are lost when calling the subscreen (3202, copy of screen 2202). For instance, it does not show my input field. Somewhere there need to be a list that contains all these parameter switches? I know how Loop at screen works but cant find the values that are supposed to be passed over to the subscreen.
Would be grateful for some help.

Hi Niklas!
Unfortunately I don't know the transaction you're working on, but I had a similar problem once.
You have to use the commands LOOP AT SCREEN and MODIFY SCREEN. I found some online help here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dba70535c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. The fields of the pseudo-table SCREEN can be found here: <a href="http://help.sap.com/saphelp_470/helpdata/en/9f/dbab6f35c111d1829f0000e829fbfe/frameset.htm">SAP Online Help</a>. I think you have to set INVISIBLE to 'X' - but you may have to experiment.
Another thing to look out for is that you have to call this method in the PBO section of the dynpro. Take care no SAP logic is executed after your modification that changes your settings...
Hope this helps (please reward me if it does),
Joerg

How do I get Safari to open a window both full screen and large?

OS 10.8.5
Safari 6.1.1
When I open a new page in Safari it is only half the screen wide and when I fill the screnn the image is still smal so I command +, three times. Is there a way to make this my default?

Then do a "get info" on it (Apple Key with the letter "i" key)
Select the "Open With" Box
Change it to "Preview"
Then select the box just beneath it
"Change All."
This should set your PDF's to be read with Preview.

Glance screen and night mode

At night, I'm keeping my Lumia 925 connected to the charger, in a small stand to see the time when I happen to wake up. The problem is that whenever e.g. an email arrives, the screen lights up and wakes me (our even worse, my wife) up.
Is there a way to set up the night glance screen so that the screen just shows the time, number of messages etc. data, but doesn't light up?

kaaremi wrote:
At night, I'm keeping my Lumia 925 connected to the charger, in a small stand to see the time when I happen to wake up. The problem is that whenever e.g. an email arrives, the screen lights up and wakes me (our even worse, my wife) up.
Is there a way to set up the night glance screen so that the screen just shows the time, number of messages etc. data, but doesn't light up?
No, none that I see.
In notifications you can turn off glance notification banners but this effects glance all the time.

Print Preview is missing from Firefox 6 on Mac OSX Lion in both File Menu and Print Dialog Box

The question says it all really. Print Preview option is missing from both the File menu and from the Print dialog box when you select Print. I use Print Preview a lot to avoid wasting paper.
A relevant issue might be that the Mac OSX app Preview is currently having trouble with various printers including my Xerox and so, temporarily, the default application for all Preview items is now Adobe Reader until Apple get their act together. Perhaps this is affecting things?
Thanks for any help

It's moved to the PDF dropdown, "Open PDF in Preview"

Actual screen and Print preview are different.

Good afternoon,
I am trying to make a spreadsheet, and have inserted numerous check boxes. On the screen itself, look great - but when I print preview it is like the text moves and the check boxes are in the middle of the words.
I am using Excel 2013 - I tried to insert pictures but it would but it would not let me.
Any assistance would be awesome - thanks.
Brian

Hi,
Do you have the long text in one cell and use the wrap feature? If it is, we can use Alt + enter to wrap in the cell in stand of using wrap feature.
The print preview should looks similar with original document.
Similar issue:
http://social.technet.microsoft.com/Forums/en-US/8864a60a-60b6-416a-80c0-2d7de24c2f59/print-preview-different-than-original-document?forum=excel
On the other hand, the issue also may be caused by the printer, we can export the Excel file to PDF/XPS file and then print it to test.
If the issue still exists, please try to upload the screenshot through OneDrive and share the link in the thread.
Regards,
George Zhao
TechNet Community Support

Set object to precence = 'visible' both in screen and print modes

Similar Messages

Maybe you are looking for