Set Status of next document in CHARM

Hi Solman experts,
I would like to automatically set the status of a "next document" in CHARM. For example if i set a close state for a SDCR i would also like the attached "next documents" to also move to a close state (SDHF etc....). I know this is possible for preceding doc's, but i have never seen it the other way.
I hope somebody can help me with this one.
Thanks in advance.
Best regards,
Ricky

Hi
ofcourse you can use the CRM_SOCM_SERVICE_REPORT to do the needful.
goto set38 run the report provide your SDCR doc no and press f8 remember to choose the status
some important sap notes
Note 901034 - Process change transactions again
Note 926087 - Phase check whether change transaction can be edited
hope problem solved
Regards
Prakhar
Edited by: Prakhar Saxena on May 13, 2011 4:20 PM

Similar Messages

  • Changing Status of preceeding document in CHARM

    Hi Experts ,
    I need to change the status of a preceeding document in CHARM.
    I created a YDAD document from YDCR.
    When i change status of YDAD to cancelled i need to change status of YDCR to Cancelled.
    Steps i followed :
    1 . While changing status of YDAD to cancelled i added a new parameter PREDOC_STATUS and given status of YDCR as E0009.
    2. In "Assign actions" for  status "cancelled" of YDAD i hve given a action SET_PREDOC .
    3.In  "Specify Status Attributes"  for  status "cancelled" of YDAD  i hve given YDCR  YDCRHEAD  E0009.
    But still it is not working . Please help me on this .
    Thanks , Vijay

    Hello,
    please take a look to this Re: Change status of previous document
    If solution is not provided; please put break points as stated lines and tell us what you see
    Regards
    Khalil

  • Delete outbound delivery set status archived in document flow

    hello!
    when trying to cancel outbound delivery, the status of the document set to archived in the document flow.
    when trying to access the document i recieved message that the document was canceled.
    the status in the document flow should b canceld, instead of archived.
    I know that  its a bug in ECC6 , but i dont know how to fix it.
    Please help?
    Regards
    Yifat

    Hi,
    On initial screen system will not show status.and it is standard
    Rather select sales order and click on STATUS OVERVIEW at item level you can able to see status of P.O
    Purch. requisition -  Purch.req. available
    Purch.confirm.status - All schedLine confrm    confirmed
    Invoice recipt status - Complete invoice rpt     Posted
    Kapil

  • Cannot complete document due to status of preceding document

    Hi everyone,
    We encounter the following problem;
    We have a grantor application and from there we create a grantor agreement via the copy control settings in customizing.
    Both transaction types have their own status profile (user status).
    Now, when we have created the agreement (as follow up document), we are missing some of the user statussses, for example 'CANCEL'.
    This is simply not available to select.
    Investigation turns out that this is due to the fact that the preceding document (grantor application) is not yet completed. After we manually change the status of the application to 'Completed', then in the agreement we can select the missing user status.
    How can we fix this? It is not a workable solution to first create the follow up document, then go back to the preceding document to change the status of that document and then go back again to the follow up document and start processing that one.
    I was told that it should be possible with normal customizing to make sure that the follow up document is "leading" and will not be affected by any status of the preceding document.
    Another option would be to use some function modules and badi's to make sure that the status of the preceding document is automatically set to completed during the copy control.
    But to be honest, we would prefer not to enhance any FM's and/or badi's but to use standard customizing.
    Does anybody have some ideas how to solve this.
    Thank you very much for your help.
    Regards,
    Pieter

    please check SCVMM 2012 | Force Remove vCenter Server
    http://digitaljive.wordpress.com/2012/07/06/scvmm-2012-force-remove-vcenter-server/
    Mohamed Fawzi | http://fawzi.wordpress.com

  • Status of Financial Document

    Hi All,
    Can we change the Financial Document Status to "C" (Notification that document has been sent) after the status of that financial document was set to "E" (Change in document has been submitted) ? And how to do that ? Or we must create a new Fin Doc ?
    Because one of my user want to change back the status of a fin doc.
    Thank you

    Hi Rudy,
    Not sure if following references could help or related to your case, but you could try it out to see how the effects.
    Setting the Status of Financial Documents
    Use:
    A financial document's status controls whether it is available for use in sales orders. For example:
    Status to B 'Document is incomplete' means that you still need additional information for the financial document
    Status D 'Document is available and can be used' means that the financial document can be assigned to sales orders
    Status E 'Change in document has been submitted' means that the document cannot be assigned to a sales order until you change its status to D
    Prerequisites
    The status of a financial document is protected by an authority object. You can configure the authorization object to allow several users to create, change, or display financial documents while allowing only one or a few users to maintain the documents’ statuses. Only users assigned activity 36 (extended maintenance) for this authority object have permission activate a financial document.
    You can also configure the SAP System to require two people to activate a financial document. This configuration helps ensure that the financial document data is double-checked before it can be used in the system. Maintain the double-check feature in Customizing for Sales and Distribution. Choose Foreign Trade/Customs ® Documentary Payments ® Basic settings ® Define Indicators for Financial Documents. Select a Financial Document Indicator and then Goto ® Details. Select Double-check on under Extended confirmation control.
    Procedure
    Go to the Cockpit for Documentary Payments.
    Choose Maintain financial documents.
    On the Status tab, select a status.
    If you want to activate the document, choose status D (Document is available and can be used).
    Save the financial document.
    See also:
    Maintenance of Financial Documents
    Regards.

  • Cant set status released for Generation Variant for report category IBD_MSD

    Dear EH&S people,
    I am trying to upload a vendor MSDS'. I am not succesfull in this. The reason is that the status of the generation variant is not "Released".
    I am not able to set the status released in the Generation variant. I am using report category IBD_MSD which should be the standerd one for Vendor MSDS.
    Together with an abap consultant we found via debugging of the matchcoded of the search of the status that he takes the DMS document type SBR as a basis. It should however be IBD.
    Has somebody encounter this problem before and have a solution for this?
    Is there somewhere customizing which controls for a certain category which DMS document type to use?
    Thanks in advance for your answer.
    Regards,
    Pascal

    Hi All,
    I found the solution.
    I looked at the detailed customizing of the document type SBR. Note 1091699 explained detailed settings of the different document types.
    SBR was not correct customized.
    It sounds strange that SBR is used for the report generation status for Vendor MSDS. I think it is because SAP treads it as if it is a raw version. So that could be an explenation why it searches for the status of that document type.
    After I updated the SBR-type correctly, I was succesfull in uploading Vendor MSDS. The DMS type which was used to save the document was IBD.
    Thanks all for your help.
    Issue closed.
    Regards,
    Pascal

  • Display Document Set Columns Within The Document Set

    Hello all! Hopefully you all can let me know if the idea I have in my head is possible:
    Background: I have a Document Library with a custom made Document Set that has about 15 columns. The way I initially designed this, I left about 10 of the fields as "Hidden" because we didn't want the user to fill out that information
    when creating a Document Set. That information would be completed in the next step through a Workflow. The Document Set Welcome Page has been left pretty much untouched with the usual web parts for Document Set Properties and the view of the items within the
    Document Set.
    Question: What I would like to know is...would it be possible to display those Document Set fields within the Document Set itself? At the moment, if I try to add another Document Library web part and view it, the information web part is
    empty, or it contains information about one of the items within the Document Set.
    Simplified Structure of Document Set:
    Name (required)
    Fiscal Year (Required)
    Total Cost (Required)
    Approval Date (Hidden)
    Requisition # (Hidden)
    Team Members (Hidden)
    Reminder Date (Hidden)
    User creates a new Document Set, fills out the information, and saves (this triggers a background workflow that approves the Document Set). After approval, a new workflow is started to provide the information for the Hidden fields (and also schedules a reminder
    for that Reminder date.)
    The goal would be to display those Hidden fields in another web part on the page. Right now, I have users going back up to the main level of the Document Library to look at a view that contains those fields.
    Hopefully I haven't confused you all too much! Please let me know if my idea is possible and any resources you might have!
    Thanks!
    Toni
    Toni Marie

    Here is the approach to read document set columns and assign to other webparts:
    for each document set you can find the id when you clicking on the document set or navigating to the welcome page,
    using this id read query string and  the associated item column values and assign to otherwebpart .
    Reference code:
    //page_load for other webpart read the query string of welcome page
    if (Page.Request.QueryString["ID"] != null)
                    ID = Convert.ToInt32(Page.Request.QueryString["ID"]);
                    if (itemID > 0)
                        GetDocumentSetItem(ID , site);
      protected void GetDocumentSetItem(int itemid, SPSite sSiteUrl)
                SPSite site = sSiteUrl;
                SPWeb web = site.OpenWeb();
                SPList list = web.Lists.TryGetList("DocumentlibraryName"); //where documentset content type attached
                SPListItemCollection items = list.GetItems();
                SPListItem item = null;
                if (itemid > 0)
                    item = list.Items.GetItemById(itemID);//getting the current item
       //read the document set item column values and assign it other webpart controls , 
                    txtDocsetidname.Text = Convert.ToString(item["FileLeafRef"]);
                    txtDocsetid.Text = Convert.ToString(item["hiddenfield"]);
    In the welcome page I have placed button to load webpart ,while loading the webpart I am reading the query string assigning the values to otherwebparts.
    G1

  • IDOC is created with status 51( application document not posted)

    Hi experts
    iam working on File-IDOC scenario, when i test the process the XML message is created with no errors and
    but the IDOC is created with status 51( application document not posted)
    the details error shows:
    An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
    during a synchronous update.
    The error was caused by the transaction VA01.
    previously i used same test data that time it was working fine,
    please tell me how can i fix the issue.
    regards
    vasavi

    Key in your Idoc number in BD87, execute
    select the error message and then follow the menu path :
    EDIT --> restrict and process  (Select)
    In the next screen UNCHECK the Bkgd Processing and execute
    Now EDIT --> Process --> foreground from error or in foreground mode.
    This will lead you the screen where it errored out.
    Thx
    PSR

  • Why  I can't find the overall status in billing document!?

    Hi,
    Why I can't find the overall status in billing document? but I can find this status in table VBUK, some documents set 'B' in this field, some set 'C', all of them are Completed and the corresponding account documents are cleared. for this status is 'B',I can't archive these documents.
    Thanks.

    Dear Lance
    Check the field Document object    i.e Document Status object .
    A     Order
    B     Purchase order
    F     Billing document
    K     Sales activities
    L     Delivery
    T     Shipment
    V     Shipping
    X     Others
    Check if all your entries are F, if not find out which document and try to find out why it is not C.
    Do revert with your feedback
    If it is still a problem , check some SAP notes
    For e.g. Note 142368 - Segment VBUK missing in billing document
    Header status segment VBUK is missing in the billing document.You can check this with the general table display (SE16).
    It is not yet known why this segment is missing.
    correct many documents, you can use report ZZVBUK01.
    Regards
    Jitesh
    Regards
    Jitesh

  • DTW - Line Status in Marketing Documents

    In SBO 8.8 SP00 PL13, I'm trying to load Sales Orders and use the "LineStatus" column to set the row to either 'Open' or 'Closed'.  The SDK indicates that valid field values are bost_Open or bost_Close.  The database column contains either 'O' or 'C'.  However, it seems that DTW only accepts a value of 'O'.  Thus, there is no way to load, or later change, a row status to closed within DTW.
    There also is no field to set the entire SO to a closed status.  If it were possible to set all rows to closed, then I presume the document itself would be closed when all lines have been entered.
    I guess the only alternative is to load all lines as open, and then write a short app that uses the bost_ values to later update the status via DIAPI.
    Dave

    We are loading historical sales orders from a legacy system so that the customer can continue to track the items, quantities, and dates sold at various customer locations.  The customer is a large, multinational organization that requires access to this history to drive their daily processes.  We've already verified the data load techniques and the customer is satisfied.  The only hickup was setting the line status of the documents, per my original message.
    The SOs and POs are being loaded as documents connected to an Activity, which is connected to a Service Call, which is in turn connected to an Equipment Card.  Most of the 58k order lines are closed, and needed for reference purposes only.  These are the lines that I will close after loading, so that they do not continue to drive demand.  The open order lines will, of course, be left open and be managed under the standard business flows.

  • Status request awaiting documents and trip awaiting documents

    Hello everybody,
    In "trip receipts without general trip data", in travel reporting, you can be set by status.
    In tab Status, in Request/Trip ind., there are 2 status: "request awaiting documents" and "trip awaiting documents".
    My question is:
    Is posible change manually the trip status to some of this status?
    Regards

    Actually thats the opposite, in customizing you defined that trip must be posted to FI before allowing  creation of expense report.
    Post your requet to FI using PRFI, PRRW.. then create your expense report from this request.
    Regards
    Mathieu

  • Leveraging Workflow Approval status in Word document

    I am using SharePoint 2013 and have created an Approval workflow that works as expected.
    I would like to leverage the Approval Status within the document so that if someone views or prints the document, it will show "Pending" or "Approved" depending on where in the approval process the document is.
    Once final approval has been made, I would also like to display within the document (e.g. cover page) the name of the approver, the date the approval occurred.
    Would I have to use a Lookup column and point that to something?

    Hi,
    According to you description, my understanding is that you want to create an approval workflow which is able to set the status and approved time and the approver in the document.
    Per my knowledge, there is no OOTB way to achieve your request. As a workaround, you can set this in document library. If someone views the document library, it will show the status and approved time and the approver in the document.
    You could create a workflow using SharePoint 2010 platform in SharePoint  2013 Designer:
    Create a date column named “Date” and a person column named “Approver” and a Single line of text column named “MyStatus” default value is “Pending” in library.
    In SharePoint Designer 2013 using SharePoint 2010 platform ,select “Start Approval Process” action, set the user.
    Add action “set [Date field] to [Today]”, in Approval -> Change the behavior of the overall task process in Customization field -> in When the Task Process Completes field, shown as figure below.
    Add action “set [Approver] to [Current Task:Assigned To]”, “set [MyStatus] to [Approved]”in Approval -> Change the behavior of a single task in Customization field -> in When a Task Completes field. The steps are similar as above.
    Then you can show the library content type column value in document template via “Quick Parts”,  access library settings -> Advanced settings -> click Edit Template, in Insert tag -> Document Property -> insert column you want, shown as
    figure below.
    Thanks,
    Dean Wang

  • Change mass status and desscription documents.

    Hi all,
    I would like to know how is possible mass change status and description from all documents in SOLMAN?
    Thanks in advantage.
    Warlei Figueiredo

    Hello Warlei,
    Unfortunately i don't know such functionalitiy and i highly doubt that it even exists.
    I would advice you using transaction SI80 to change description and status because you ll get an overal view of all documents of your project in one and only screen
    For each entry (doc) you can click on button 'Set Status' to change status and button 'Change Attributes' to change other attributes such as Document type, Document Properties, Title, Technical Name, Content type...
    In order to have your list in SI80 Click on button '+ with search', then select 'Solution Manager', then in 'technical Name' fill your ptoject Name and validate.
    You ll see a new line that adds to your Favorites. By double clicking on your project you ll see the list of documents.
    If you need a mass update tool , you can ask a developer helping you achivere that. Table SA01PHIO contains description & status of all documents !!
    PHIOID is the hexadeciman id of documents; DESCRIPT is the description you want to change and STATE is status of doc
    A simple program mass updating this table (meaning description and status) won't be complicated for a developer to code
    Hope this helps
    Regards
    Khalil
    Edited by: Khalil SERRHINI on Jun 21, 2010 4:19 PM

  • Status 51 material document data and po data do not match(vendor)

    i am using we19 to try an inbound idoc mbgmcr(receipt for po)
    i put in gm_code 01
    movement indicator B(goods receipt for po)
    vendor 3815
    PO 4500015241
    PO Order Item 00030
    Movement type 101
    qty in unit of entry  1
    iso code unit of measurement pc
    on the po screen i see the po item and qty to be delivered is 75
    when i run the inbound idoc i get
    status 51 material document data and po data do not match(vendor) but as i say on the po inquiry screen i see the po vendor item with 75 to be delivered
    what am i missing????????????????

    thank you
    i put in the leading zeros and got rid of that problem
    now i am getting status 51
    posting only possible in 2004/07 and 2004/06
    but in the posting date i use 07/02/2004  i have tried several dates in the period but get the same error
    any ideas?
    thanks you

  • After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it?

    After I downloaded the new version of iTunes 11.0.1 and i try to open it it says: ''There is no application set to open the document ''iTunes 11.0.1.dmg.part''. How can i install this without paying for an app to do it? What apps can i download to do this type of work.

    .dmg.part is not a complete file..  It usually indicates that the entire file has not been downloaded yet.  Are you sure you downloaded the entire file?   (i recommend updating itunes through  > Software Update
    Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

Maybe you are looking for