Set tabindex in application
Hi All,
How to set tabindex in all application pages without defining in every page_item and button? My flow is first page_item and after that button. It is possible?
Thanks
Hi,
Shiv wrote:
I have many textfield, select list or textarea and button. My requirement is after all page item focus goes on button. It is possible using tabindex="n". but i have to provide in each page item and button. So it is possible to set automatic tabindex?By default, the tab index is the order of the fields on the page. If the button is positioned after all the items, the focus should automatically go there. If that is not the case, please explain where the focus is going to after the last item.
Do you have only one button per page?
In any case, I think the only way to achieve it would be somehow identify the last item and the button in the page and use some Javascript to set the tabindex attribute dynamically in a page zero dynamic action.
Luis
Similar Messages
-
HOW TO: Set up your application server to run BC4J
How To set up your application server to run BC4J.
INTRODUCTION
A running BC4J application is actually the combination of:
* Your own application files
* BC4J runtime libraries
In order to successfully run your BC4J application in local mode, the first requirement is
that your application server contains the necessary BC4J libraries.
This How To describes the steps required to ensure that you have a functional
BC4J runtime environment installed on your application server.
Oracle IAS 1.0.2 and Tomcat 3.1 will be used as examples.
THE BC4J RUNTIME LIBRARIES
Whatever application server you deploy to, the following libraries
are required in the following order to be in the classpath.
BC4J Libraries:
xmlparserv2.jar
jdev-rt.zip
jbojdbcpatch.zip
connectionmanager.zip
jbohtml.zip
jboimdomains.zip
ordim817.zip
ordvir817.zip
ordhttp.zip
jbomt.zip
jbodomorcl.zip
jboremote.zip
jndi.jar
jbodatum12.zip
These libraries can be found in <JDEV_HOME>/lib/
INSTALLING THE LIBRARIES ON IAS:
Installing the libraries is simply a matter of copying them to the
application server's filesystem and adding them to the classpath.
IAS's classpath can be modified by editing the file:
<IAS_HOME>\Apache\Jserv\conf\jserv.properties
In this file you'll find the existing pre-installed BC4J libraries which
looks like this:
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\lib\ordim817.zip
etc.
Note! These BC4J libraries correspond to JDeveloper 3.1.1.
In order to run JDev 3.2 based applications you will have to update these libraries
to JDeveloper 3.2 production.
Steps:
1. Copy (or FTP) the JDev 3.2 BC4J libraries from <JDEV_HOME>\lib to a NEW directory on the
appserver's filesystem called:
<IAS_HOME>\Apache\BC4J\newlib
2. Modify the classpath by editing <IAS_HOME>\Apache\Jserv\conf\jserv.properties.
Example: (modified classpath entries)
# New 3.2 BC4J Runtime libraries
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\xmlparserv2.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jdev-rt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbojdbcpatch.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\connectionmanager.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbohtml.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboimdomains.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordim817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordvir817.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\ordhttp.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbomt.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodomorcl.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jboremote.zip
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jndi.jar
wrapper.classpath=<IAS_HOME>\Apache\BC4J\newlib\jbodatum12.zip
Note: Make sure to remove or comment out the existing 3.1.1 BC4J library entries!
To see the changes, you must restart IAS and that's it, your IAS will be updated with
the JDev 3.2 BC4J libraries which allow you to run BC4J Data Tags among other
things!
INSTALLING THE LIBRARIES ON TOMCAT
As before, this process involves both the copying of the libraries
and modifying the classpath.
After copying the BC4J libraries to a path accessible from Tomcat,
you can modify Tomcat's classpath by editing it's startup script:
<TOMCAT_HOME>\bin\tomcat.bat (NT)
<TOMCAT_HOME>\bin\tomcat.sh (Unix)
Here is a portion of a modified tomcat.bat (on NT)
rem Add BC4J libraries
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jdev-rt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbojdbcpatch.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\connectionmanager.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbohtml.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboimdomains.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\or dim817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordvir817.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\ordhttp.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbomt.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodomorcl.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jboremote.zip
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jndi.jar
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\jbodatum12.zip
rem Add Oracle JDBC library
set CLASSPATH=%CLASSPATH%;D:\bc4j_lib\classes12.zip
Note: I also added the Oracle JDBC library since Tomcat does not have it.
It is found at:
<JDEV_HOME>\jdbc\lib\oracle8.1.7\classes12.zip
And That's It!
When Tomcat is restarted using this script, the necessary BC4J libraries
will be in the classpath..
A follow up How To:"How To Deploy a BC4J JSP Application on IAS and Tomcat"
will be posted shortly!I copied the following files in jserv classpath
bc4jct.jar
bc4jctejb.jar
bc4jdomorcl.jar
bc4jhtml.jar
bc4jimdomains.jar
bc4jmt.jar
bc4jmtejb.jar
bc4juixtags.jar
collections.jar
datatags.jar
jdev-cm.jar
regexp.jar
share.jar
uix2.jar
cabo.war
classes12.jar
nls_charset12.jar
ordim.jar
ordhttp.jar
runtime12.jar
jdev-rt.jar
xmlparserv2.jar
bc4j_jclient_common.jar
webapp.war
I got this list from Jdev 9031 on-line help
I also copied the new DataTags.tld file to /webapp directory
When i run my jsp page i get this error..
java.lang.NoClassDefFoundError: java/util/TimerTask
at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:693)
at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:148)
at jspapp.odrjsp__html._menu._jspService(Compiled Code)
at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
at oracle.jsp.app.JspApplication.dispatchRequest(Compiled Code)
at oracle.jsp.JspServlet.doDispatch(Compiled Code)
at oracle.jsp.JspServlet.internalService(Compiled Code)
at oracle.jsp.JspServlet.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at oracle.portal.provider.v1.http.JspRenderer.renderBody(JspRenderer.java:116)
at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:164)
at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(Compiled Code)
at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(Compiled Code)
at oracle.portal.provider.v1.http.HttpProvider.service(Compiled Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at org.apache.jserv.JServConnection.processRequest(Compiled Code)
at org.apache.jserv.JServConnection.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
In the JDK 1.3 APi docs, i found that TimerTask was introduced only in JDK 1.3
Does this mean that BC4J (in jdev 9031) will only work
with JDK 1.3 or later?
Thanks for your time.
Harish -
How to set the WebDynpro application title (IE windows title)?
Hello all,
I would like to set the WebDynpro application title according to the current transaction ID. This title is the IE windows title that is shown on the upper left-corner of the IE browser.
Rule: [Object Instance Information] u2013 [Application Title] u2013 [Browser Title]
For example: Trans. <No.> - <My App> - Windows Internet Explorer
I would like to set <No.> dynamically on run-time according to my current transaction number.
I have this piece of code that gets a reference to the application info:
data: lr_app_info TYPE REF TO if_wdr_rr_application.
lr_app_info ?= wdr_task=>application->application_info.
And there is lr_app_info->get_description() method to have the description of the application, but there is no set method.
The application description can be hardcoded in:
tx. SE80, opening the WebDynpro component, then accessing its WebDynpro application. In the properties tab, there is a description field. I need to append transaction ID to it.
Do you know any way to implement this? This issue is for WebDynpro ABAP.
Best regards and thanks in advance,
Fouad.Hello Satra,
Thanks for your reply. I already had a look into that thread, but my question is not related to the windows title of the WebDynpro component.
My question is related to the title of the Internet Explorer that we all see on the top left-corner. For WebDynpro , this is the WebDynpro application title. How can we change it?
I hope my question is clear now, and I wish someone can help me soon.
With kind regards,
Fouad. -
UTF/Japanese character set and my application
Blankfellaws...
a simple query about the internationalization of an enterprise application..
I have a considerably large application running as 4 layers.. namely..
1) presentation layer - I have a servlet here
2) business layer - I have an EJB container here with EJBs
3) messaging layer - I have either Weblogic JMS here in which case it is an
application server or I will have MQSeries in which case it will be a
different machine all together
4) adapter layer - something like a connector layer with some specific or
rather customized modules which can talk to enterprise repositories
The Database has few messages in UTF format.. and they are Japanese
characters
My requirement : I need thos messages to be picked up from the database by
the business layer and passed on to the client screen which is a web browser
through the presentation layer.
What are the various points to be noted to get this done?
Where and all I need to set the character set and what should be the ideal
character set to be used to support maximum characters?
Are there anything specifically to be done in my application code regarding
this?
Are these just the matter of setting the character sets in the application
servers / web servers / web browsers?
Please enlighten me on these areas as am into something similar to this and
trying to figure out what's wrong in my current application. When the data
comes to the screen through my application, it looks corrupted. But the asme
message when read through a simple servlet, displays them without a problem.
Am confused!!
Thanks in advance
ManeshHello Manesh,
For the database I would recommend using UTF-8.
As for the character problems, could you elaborate which version of WebLogic
are you using and what is the nature of the problem.
If your problem is that of displaying the characters from the db and are
using JSP, you could try putting
<%@ page language="java" contentType="text/html; charset=UTF-8"%> on the
first line,
or if a servlet .... response.setContentType("text/html; charset=UTF-8");
Also to automatically select the correct charset by the browser, you will
have to include
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> in the
jsp.
You could replace the "UTF-8" with other charsets you are using.
I hope this helps...
David.
"m a n E s h" <[email protected]> wrote in message
news:[email protected]...
Blankfellaws...
a simple query about the internationalization of an enterpriseapplication..
>
I have a considerably large application running as 4 layers.. namely..
1) presentation layer - I have a servlet here
2) business layer - I have an EJB container here with EJBs
3) messaging layer - I have either Weblogic JMS here in which case it isan
application server or I will have MQSeries in which case it will be a
different machine all together
4) adapter layer - something like a connector layer with some specific or
rather customized modules which can talk to enterprise repositories
The Database has few messages in UTF format.. and they are Japanese
characters
My requirement : I need thos messages to be picked up from the database by
the business layer and passed on to the client screen which is a webbrowser
through the presentation layer.
What are the various points to be noted to get this done?
Where and all I need to set the character set and what should be the ideal
character set to be used to support maximum characters?
Are there anything specifically to be done in my application coderegarding
this?
Are these just the matter of setting the character sets in the application
servers / web servers / web browsers?
Please enlighten me on these areas as am into something similar to thisand
trying to figure out what's wrong in my current application. When the data
comes to the screen through my application, it looks corrupted. But theasme
message when read through a simple servlet, displays them without aproblem.
Am confused!!
Thanks in advance
Manesh -
I can't set shortcut for „Application windows"
System Preferences → Exposé & Spaces → Exposé
I can’t set shortcut for „Application windows” — first column with Fn key is OK, but the second column with mouse button doesn’t work. If I set „secondary mouse button” for „application windows”, it doesn’t work. But if I set „secondary mouse button” to „All windows”, it works! All mouse shortcuts for „All windows” or „Show desktop” work, but no mouse shortcut for „Application windows” work . The same with „Mouse button 3” and other buttons.
Can you help me, please?Do you see the iTunes Library icon in the window? Click on it and the use the scroll bar to get to the tracks you want.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Patch set 3 of Application Server (version 10.1.2.3)
All,
I just got word that patch set 3 of Applications Server 10.1.2 (10.1.2.3) is now targeted for March 7th 2008.
It includes support for MS Vista, both on the client and the builder.
It does not include certification for Sun's plug-in version 1.6 though. It is targeted for the end of March currently.Let me explain, although I am sure Jan can clarify further if required when he comes on line.
If for example, 10.1.2.3 came out on the 15 March (made up date) and we said that we have not yet completed our certification testing.
Then between the 15th and the 30th March we run all our tests and everything passes (it can take a week or so to do the testing). Then on the 30th of March we can say "10.1.3.2 IS certified".
So, we don't need to patch it, its just that we haven't completed all our certfication testing by the time the product is released.
Regards
Grant -
"error occurred setting the server application active"
Hi All,
I found following error when I save outline in ASO application. It seems that the application cannot be started correctly. Other applications (BSO/ASO) are running correctly.
"error occurred setting the server application active"try this:
Issue can be from both server and application side:
1)Addition of SERVERTHREADS with a proper value. When any database operation is requested then monitor the number of process, memory etc. Idea is to identify which process is trying to use max resource on server level.
2) Also, if possible try and increase the ulimit setting to "unlimited".
3) Verify NETDELAY and NETRETRYCOUNT -- Guess you have checked this so values should be fine here.
4) If the environment is windows then:
a)Open the Registry
b)Navigate to Local Machine\System\CurrentControlSet\Services\TCPIP\Parameters
c)Add new DWORD Value named TcpTimedWaitDelay, right click and select Modify. Select decimal radio button, type in 30. (The default value of this parameter is 2 minutes. This is how long it will take for a TCP/IP port that was used by the network for a connection to be released and made available again. 30 sec is the minimum allowed by Microsoft)
d)Add new DWORD Value named MaxUserPort, right click and select Modify. Select decimal radio button, type in 65534. (The default value is 5000. This determines the highest port number TCP can assign when an application requests an available user port from the system).
e)Add new DWORD Value named MaxFreeTcbs, right click and select Modify. Select decimal radio button, type in 6250. (The default value is 2000. This determines the number of TCP control blocks (TCBs) the system creates to support active connections. Because each connection requires a control block, this value determines how many active connections TCP can support simultaneously. If all control blocks are used and more connection requests arrive, TCP can prematurely release connections in the TIME_WAIT state in order to free a control block for a new connection).
f) Reboot the server.
5) On application side, look at the cache settings, If they are very high then try lowering them and check.
Cheers!!
HA:-)
Edited by: user9513506 on Sep 2, 2008 5:03 AM -
Setting Beans in Application Scope
How do I set beans in application scope at the start of a JSF web app? I'd like to be able to do something similar to the Struts plugin.
Hi,
I also tried to use a servletcontextlistener. The problem is, that I cannot
put any beans in the facescontext, because a NullpointerExcpetion
is thrown. In the contextInitialized-Method I do the following:
FacesContext context = FacesContext.getCurrentInstance();
ApplicationFactory factory =
(ApplicationFactory) FactoryFinder.getFactory(
FactoryFinder.APPLICATION_FACTORY);
Application application = factory.getApplication();
ValueBinding binding = application.createValueBinding( "#{Bean}" );
In the createValueBinding-method a Exception is thrown. So I cannot call
createValueBinding when I am not in a facescontext.
Can anyone help me?
Thanks
Andy -
How to develop set independent mobile application?
I want to know when application is developed using midlet (MIDP), it can be deploy to any mobile set or it will be os dependent or what? What should i use (Profile/Configuration) to develop mobile set / os independent application?
Please help me. Give me links where i can learn the basics open source free codes available.
Thanks in advance.
DharaJust stick to the basic midp 2.0 (or 1.0) api. The you only need to sail arround all the phone specific implementation bugs ;)
-
HOW TO SET UP PARTNER APPLICATION TO USE SSO OUTSIDE OF PORTAL
If anyone knows how Portal switches context to run as the db user mapped to the lightweight schema and how it knows the db schema password please let me know.
Should you have any queries please do not hesitate to contact me on 07775 896738.
From document Oracle Portal Security Overview on PortalStudio.oracle.com:
In Single Sign On mode (EnableSSO=Yes in the DAD), mod_plsql determines the name of the light-weight user and mapped database schema by calling
WPG_SESSION_PRIVATE.GET_LW_USER and WPG_SESSION_PRIVATE.GET_DB_USER respectively.
** These calls are done using the Portal Schema (PORTAL30) and Portal schema password **
mod_plsql then executes the procedure in the requested URL by using the N-Tier Authentication feature to connect to the database as the user returned from
WPG_SESSION_PRIVATE.GET_DB_USER. ..... Note that N-Tier Authentication requires all schemas to be used for Portal user mappings to be granted 'connect
through' privleges to the Portal schema (PORTAL30).
The WWCTX packages are also used.
So this is how it works with standard Portal
- the document states that the WPG_SESSION_PRIVATE package is only accessible to the Portal schema
- but I checked and it is also available to PORTAL30_SSO
SQL> desc WPG_SESSION_PRIVATE
PROCEDURE CREATE_SESSION
Argument Name Type In/Out Default?
P_COOKIE_NAME VARCHAR2 IN
FUNCTION GET_DB_USER RETURNS VARCHAR2
FUNCTION GET_LW_USER RETURNS VARCHAR2
PROCEDURE GET_SESSION_INFO
Argument Name Type In/Out Default?
NUM_PARAMS NUMBER OUT
PARAM_NAMES TABLE OF VARCHAR2(32000) OUT
PARAM_VALUES TABLE OF VARCHAR2(32000) OUT
PROCEDURE RESET_SESSION
Argument Name Type In/Out Default?
P_COOKIE_NAME VARCHAR2 IN
In my case only the Login Server (PORTAL30_SSO) is going to be used/installed
- the SAMPLE_SSO_PAPP application will only work if the DAD used to access is it set to use Basic authentication, i.e. the actual integration with the Login Server
is done in the sample application code calls, stored in the database
- when a DAD has enableSSO=yes it automatically accesses Portal (PORTAL30) packages to implement N-Tier authentication
I'm currently testing:
1. Configuring the SAMPLE_SSO_PAPP sample as documented with a DAD with Basic authentication
2. Amending the ssoapp procedure to set context to another (db) user on successful authentication:
wwctx_api.set_context (
p_user_name => 'SCOTT',
p_password => 'TIGER' );
3. If this works then set_context with get_lw_user instead
I have now amended the ssoapp procedure as follows to print out
1. The userid entered when the login box is presented
2. The Database user which the Portal Lightweight user is mapped to
3. The Lightweight user Portal has used for authentication
Amendments to papp.pkb:
(ssoapp procedure, declare db_user_info and lw_user_info as VARCHAR2 in declare section)
htp.p('Congratulations! It is working!<br>');
db_user_info := wwctx_api.get_db_user;
lw_user_info := wwctx_api.get_user;
htp.p('User Information:' || l_user_info || '<br>');
htp.p('DB User Information:' || db_user_info || '<br>');
htp.p('LW User Information:' || lw_user_info || '<br>');
The following shows the interesting results from my testing:
- if the user owning the sample_sso_papp package is PORTAL30_SSO then the call to wwctx_api.get_db_user succeeds
- if the user owning the sample_sso_papp package is a non-portal schema e.g. SSOAPP below the call to wwctx_api.get_db_user generates a User Defined exception
Steps to test:
Created new schema SSOAPP on the database
- edited it in Portal and checked the use this schema for Portal users checkbox
- created new Lightweight user SSO_LW in Portal, mapped it to SSOAPP schema
- created new Lightweight user SSO_SCOTT in Portal, mapped to SCOTT schema
- loadjava -user ssoapp/ssoapp@portal30 SSOHash.class
- sqlplus portal30/portal30@portal30
@provsyns ssoapp
- sqlplus ssoapp/ssoapp@portal30
@loadsdk.sql
@loadpapp.sql
Created DAD with basic authentication SAMPLE_SSO_PAPP
- username: ssoapp
- default home page: sample_sso_papp.ssoapp
Registered the Sample SSO Partner Application with the Login Server and ran regapp.sql
Commented out the calls to get_db_user in papp.pkb to avoid exception
- called http://<server>/pls/sample_sso_papp
- logged on as SSO_LW/sso_lw
- got output:
Congratulations! It is working!
User Information: SSO_LW
LW User Information: PUBLIC
So the Portal lightweight user is not returned as SSO_LW
if anyone knows why the Lightweight User in my test is returned as PUBLIC not SSO_LW
Best Regards
MIchaelhttp://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
-
How to set up web application integration to use hotmail as my default email
I use hotmail and/or yahoo for my email providers, but when I click on an email link on a website, nothing opens like it did with IE. The website says I can set this up through a "web application integration" but I cannot find instructions on how to do this anywhere. I checked out all the "options" under tools and can't find it. I'm sure it's simple but I can't find it, LOL
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox
-
What is the correct way to set a web application to use HTTP or HTTPS?
In the past I've always created an HTTP web application as the default zone. Then extended the web app, creating a new IIS website on port 443 and enabled SSL. This seems to have worked fine, but I recently read an article stating that it is not good to
extend a web app unless absolutely necessary. So can someone tell me what the proper way is to configure a single web application to work with HTTP and HTTPS?Extending the web application to support both HTTP and HTTPS is a perfectly good method and in fact is the only way to have a web application support both so what you've done is fine.
If the web application will only use HTTPS, you can set this up when you first create the web application. Specify port 443 and the SSL option (and ensure the URL has an https://) when creating the web application. You'll need to install the certificate
in IIS once the web application has been created.
Jason Warren
Infrastructure Architect
Habanero Consulting Group
habaneroconsulting.com/blog -
Is there a way to switch between workspaces in Spaces from the comnand line? I use several workspaces from Spaces, each workspace having a certain number of fixed applications running. Rather than set all this up each time I log on, I'd like to write a script from the command line (I use gawk) to automate this. Currently I have a gawk script that, given a directory, opens a few xterms whose working directory is the given directory, and opens "preview" applied to a certain file in that directory. However, at present I have to manually move an xterm through each workspace and run my gawk script in each workspace (applied to each directory that I'm working on).
There must be a better way...Addendum: Can this be done via: open -a Spaces --args xxx , where xxx is some set of arguments (or something like this)?
-
How to set my default application...not working
My company has nearly all adobe applications installed from PageMaker 6.5 through InDesign 5.5. We use them all frequently. I'm trying to set my defaults on the Mac Pros and it is not working.
Specs if Needed:
OSX 10.6.8
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 6 GB
Boot ROM Version: MP51.007F.B01
+BootCamp dual boot Windows 7
We proof out all files in the version that it comes to us. Our customers are on different versions than the most current, and it's driving us crazy that we can't set the defaults for
each Adobe application. For Instance,
We want for Defaults:
Photoshop = CS4
InDesign = CS4
Illustrator = CS5
etc.
The Finder will not allow us to make the change to open all of a certain file type in the version we want by default. We also use a third party application that allows us to "double
click" InDesign files and open them in the correct version. This saves valuable navigation time and because of the OS's problem with using the correct icons, it also saves us time
dealing with the "Untitled" document when we accidentally convert by opening in the wrong application by mistake. We have gone through Onyx utilities and massive permissions
troubleshooting to no avail. Does anyone know how to set the default for ALL files of a type for Adobe Apps? This has been thoroughly tested and is not working on 10 plus
machines, and only effects Adobe apps.
Any Ideas?I think you miss understand the question. There is a problem with OSX 10.6 and Adobe Apps. 10.5 ok, not sure about 10.7 because of all of the other Adobe problems we downgraded the test machine that we used for the upgrade. There is no way that I have found to make the files “Double-Clickable” through assigning a default application of files with Adobe extensions. We already have an app. that we use and it worked fine until 10.6. I can’t just approve a division-wide purchase of software for a bug that may be solvable by other means (by the way supposed cost of the licensing Soxy is deceiving at $20. Not for us. For companies it’s $20 per platform & also for each time Adobe updates. When we swap out hardware, we have to pay $40 again . Their pricing is absurd). $40 x a couple hundred machines every 18 months or so, uugh! The ten or so I’m working with are just the ones in my immediate department.
I know you have good intentions with your reply and I appreciate it, however I’m looking to solve the problem, not put a band-aid on it. If the problem is by design so Rorohiko can hold companies hostage, then I guess we’ll just have to deal with the few extra clicks it takes to figure out which version we’re in need of, and dragging to the launch bar.
Thanks very much for your reply,
Seth -
SOAP Adapter without SOAP envelope sets contenttype to application/xml
Hi,
I wrote a adaptermodul for the SOAP adapter to create a SOAP:HEADER.
I disable the SOAP envelope in the communication channel.
Now I get a error from the WebService Provider because the SOAP Adapter sends with Content-Type application/xml and not text/xml. I set the content-type in the adapter module but it seens to not work.
How can I correct this ?
Regards,
GeraldHi
Simple answer is NO, it is not possible (without party/channel/ service etc to process the request)
but it is worth a try to check if the URL encoding works.. though I have not tried..
for example sending the hex value of the "?" - %3F%
URL is a generic topic, you can search that to get more information
(ex : http://www.blooberry.com/indexdot/html/topics/urlencoding.htm)
Regards
Vishnu
Maybe you are looking for
-
Problem in cancelling a goods issue with WS_REVERSE_GOODS_ISSUE
Hi all, I use the function module WS_REVERSE_GOODS_ISSUE in order to cancel a goods issue but most of the times it does not function as expected. I call the function module as follows: CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE' EXPORTING i_vb
-
My child has put in the wrong password on my phone multiple times, my iPhone now say "iPhone has been disabled connect to iTunes" When I hook my phone up to iTunes, iTunes then says that my iPhone can not be hooked up to iTunes because it has a passw
-
One page in my site won't load
When I click on one of the links inside my site, I get the "We're Sorry. We can't find the HomePage you've requested" message. I have checked the link many times to make sure it is correct (using Inspector) and have deleted and recreated the link, as
-
On my MBPro Retina, from one day to the other the windows became slightly transparent. So when an application with a dark background is opened full screen, I can slightly see my Finder windows behind. I don't have this behaviour on my iMac. Any clue
-
JTable - loosing focus without tabbing out
Hi all, I have a JTable and when the user goes to enter some text in a field I would like the value entered to persist to the underlying object as soon as the text is changed. This is without the user tabbing out of the JTable. Currently when a value