Set the same dimensions to multiple objects

Is there a way how I could set the same width and height to the multiple selected objects with different dimensions? I don't wanna go through all of these objects one after another and set up the dimensions manually… Maybe a script would be available? See the example below. Thanks

try the script set all the things by wundes
wundes.com

Similar Messages

Can I have the same printer installed multiple times under different names?

On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
Omar

Back Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD

How can I edit the same photo in multiple LR catalogs?

Hi Forumworld,
I would like to edit the same photo in multiple LR catalogs. Before you say "don't", there are many reasons why I'd like to do this. I am a working professional photographer and LR is one of the many tools in my workflow. I essentially want to organize my catalogs according to two different principles: once by year and once by theme. As in, a catalog each for 2014, 2015, 2016. But also one where I can group all of my wedding photos, for instance. I have several reasons for not throwing all of them together into one catalog.
I know that LR is essentially non-destructive, making this an uphill battle. But: if I do something like set all LR catalogs involved to Automatically Write Changes into XMP, should that a) be visible by any catalog and b) sync properly? As in: once the photo is imported to both Catalog A to Catalog B, can I edit it in A and see those changes - including developing, but also flagging etc. - in B? And vice-versa?
Thanks for your help,
Adam

Hi All,
thanks for the various answers. I've considered most of what was written already, but the gem in all this that I was looking for was from John's answer:
You will also lose some of your work (xmp doesn't record flags, stacking, virtual copies, history steps...). So for one thing you specifically mentioned, flagging, you can't sync it across multiple collections
This is consistent with what I've experienced - I wanted to find out if there was a way to not loose some of my work. The goal was to find a way that everything would sync automatically & properly so that I would always access the identical image from various catalogs. This is what I thought XMP would do - but I experienced that it didn't and now I understand that it won't do it properly, regardless of the settings. Flags were exactly the piece of information I was missing when I tried this.
I am surprised that everyone is telling me to use one Catalog. I am sorry but I don't believe that it will scale - because that is not what I have experienced. When my LR4 catalog got to about 50,000 images, it slowed down dramatically. Has something big changed in LR5? I have read many threads about this, most seem to say that already in LR4 it shouldn't have slowed down, but it did. No, my hard drive wasn't full. I just shoot a lot, mostly with a D800.
Thanks,
Adam

Setting the name of a new object from a string

Is there anyway I can set the object name of a newly created
object from a string?
eg.
(the code below generates a compile time error on the
variable declaration)
public function addText(newTxt:String, txt:String,
format:TextFormat):void {
var
this[newTxt]:TextField = new TextField();
this[newTxt].autoSize = TextFieldAutoSize.LEFT;
this[newTxt].background = true;
this[newTxt].border = true;
this[newTxt].defaultTextFormat = format;
this[newTxt].text = txt;
addChild(this[newTxt]);
called using>
addText("mytxt", "test text", format);
I could then reference the object later on without using
array notation using mytxt.border = false; for example
There are many a time when I want to set the name of a new
object from a string.
In this example I have a function that adds a new text object
to a sprite.
The problem is, if I call the function more than once then
two textfield objects will exist, both with the same name. (either
that or the old one will be overwritten).
I need a way of setting the name of the textfield object from
a string.
using
var this[newTxt]:TextField = new TextField()
does not work, If I take the "var" keyword away it thinks it
a property of the class not an object.
resulting in >
ReferenceError: Error #1056: Cannot create property newTxt on
Box.
There must be a way somehow to declare a variable that has
the name that it will take represented in a string.
Any help would be most welcome
Thanks

Using:
var this[newTxt]:TextField = new TextField()
is the right approach.
You can either incrment an instance variable so that the name
is unique:
newTxt = "MyName" + _globalCounter;
var this[newTxt]:TextField = new TextField();
globalCounter ++;
Or store the references in an array:
_globalArray.push(new TextField());
Tracy

How can I apply the same crop to multiple photos?

It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
Bo

Here's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays

Compare two members from the same dimension in HFR

Hi,
Is it possibe to compare two members from the same dimension in HFR? The requirement is to compare Year and Week members from the same dimension. The Week date will be selected from POV. The corresponding Year date should be displayed in the report. Week dates are in the format W2008-03-07 and Year dates are in YTD2008-03-07.
The dates are same except the preceding character.I am unable to compare these two. In my understanding there's no substring or replace functions in HFR.
Kindly help. Thanks in advance.
Regards,
Uma

Hi,
How is your database structured? it may be possible to use the 'RelativeMember' function if it will always be the same number of steps between the 'W' member and the 'YTD' member, e.g. if your hierarchy is something like:
Time
.Weeks
..W2008-03-07
..W2008-03-10 etc.. for 52 weeks
.YTD
..YTD2008-03-07
..YTD2008-03-10 etc.. for 52 weeks
In your report select 'Current Point of View for Time' in one row/column and in the other use:
RelativeMember set up as follows:
Member: Current Point of View for Time
Offset: 52
Hierarchy: Time
RelativeMemberList: Lev0, Time
UseFirstDescendant: leave unselected
Hope this helps
StuartGame
www.analitica.co.uk

Runtime prompts with the same dimension

Hello,
I'm setting up a business rule to contain two variables referring to members in the same dimension (for example, Account_VAR and Account_Basis_VAR both using Member of the Account dimension). I would like to have Account_VAR default as filled based on the selected member on the form (and hidden) and then have Account_Basis_VAR default to the same account as Account_VAR, but selectable based on which accounts the user has Read access to.
The calculation is working properly and the values are being distributed to the Account selected (Account_VAR) based on the current allocation to level 0 in the base account(Account_Basis_VAR), but I would like to hide Account_VAR while still prompting for Account_Basis_VAR. I've tried a few iterations of settings but both account prompts always appear in the runtime prompt window.
Is there a workaround for this?
Nik

The strange thing is that the results from the queries are correct running them in SQL Developer. This is one that works:
SELECT Project.Project saw_0, "- SalesOrderFact"."Sales Amount" saw_1, "- PurchaseOrderFact"."Purchase Amount" saw_2, REPORT_SUM(saw_1 BY ), REPORT_SUM(saw_2 BY ) FROM SalesOrder ORDER BY saw_0
SALES ORDER:
select T3032.PROJECT_DESCRIPTION as c1,
sum(T161.SALES_AMOUNT_LOCAL) as c2
from
DIM_PROJECT_V T3032,
CUBE_SALES_ORDER T161
where ( T161.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_DESCRIPTION
order by c1
PURCHASE_ORDER:
select T3032.PROJECT_DESCRIPTION as c1,
sum(T3020.TOTAL_BUY_AMOUNT) as c2
from
DIM_PROJECT_V T3032,
CUBE_PURCH_ORDER T3020
where ( T3020.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_DESCRIPTION
order by c1
And this will give the wrong result in Answers (correct in SQL..):
SELECT Project."Project Id" saw_0, "- SalesOrderFact"."Sales Amount" saw_1, "- PurchaseOrderFact"."Purchase Amount" saw_2, REPORT_SUM(saw_1 BY ), REPORT_SUM(saw_2 BY ) FROM SalesOrder ORDER BY saw_0
SALES_ORDER:
select T3032.PROJECT_KEY_NAME_ID as c1,
sum(T161.SALES_AMOUNT_LOCAL) as c2
from
DIM_PROJECT_V T3032,
CUBE_SALES_ORDER T161
where ( T161.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_KEY_NAME_ID
order by c1
PURCHASE_ORDER:
select T3032.PROJECT_KEY_NAME_ID as c1,
sum(T3020.TOTAL_BUY_AMOUNT) as c2
from
DIM_PROJECT_V T3032,
CUBE_PURCH_ORDER T3020
where ( T3020.DIM_PROJECT = T3032.DIMENSION_KEY )
group by T3032.PROJECT_KEY_NAME_ID
order by c1
As you can see the SQL look very familiar, and I cannot see anything in SQL that should be the cause of this error. I think the error must be in the BI Memory or something.
Any ideas?

Applying the same ActivationConfigProperties to multiple MDBs

Is there a portable way of applying the same ActivationConfigProperties to multiple MDBs?
I think it's typical for many applications to contain MDBs which differ only in the destination name so it should promote ease of use and convention over config to have such a feature, say for JMS 2?
Motivation for asking is:
In Jboss 5.1.0 one could use a container defined AspectDomain to define a set of properties that an MDB inherits and overrides at will. This allowed externalization of config properties as well as reuse. This is no longer available in Jboss 7.1.X. and I found myself having to create an ejb-jar.xml file
that contains
<ejb-name>MDBName</ejb-name>
      <activation-config>
        <activation-config-property>
          <activation-config-property-name>destinationType</activation-config-property-name>
          <activation-config-property-value>javax.jms.Queue</activation-config-property-value>
        </activation-config-property>
        <activation-config-property>
          <activation-config-property-name>providerSpecificProperty.eg.queueManagerHostName</activation-config-property-name>
          <activation-config-property-value>${departmentA.queueManager.hostName}</activation-config-property-value>
        </activation-config-property>
      </activation-config>
...where ${departmentA.queueManager.hostName} is an ant style variable configured in Jboss 7 standalone.xml. There's quite a lot of those provider specific properties that I had to define. Then I had to copy and paste the same configs for all the MDBs I had keeping only the queue name definitions on the MDB.
I'm not really looking for the externalization in this request since that's container specific but putting the properties in one place to apply them to multiple MDBs could be helpful in the spec.
One very crude approach would be to allow wildcards on the <ejb-name> values as is allowed for intercepted classes in interceptor definitions (which would make it a request for the EJB spec rather than JMS?)
Anyone know something I can use now with the current specs that allows definition of config properties at one place and reusing the configs over multiple MDBs?

I've asked around (and checked the EJB spec), but I haven't found any way to do this.
Nigel

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc)?

Would like to use 4nr iPads as an autocue system. Can I view the same pdf on multiple iPads at the same time with 1 iPad operating as the master (controlling page turns etc) and the others operating as slaves? Can this be done without the use of 3G or a remote Wifi hub? I would appreciate your input.................

Open the document in Acrobat Reader and use the menu Window > New Window.

Can i use the same advertisement to multiple collections?

Can i use the same advertisement to multiple collections?
Advertisment A1 currently linked to collection C1.
Can i use the same advertisement A1 to a collection C2? Because my collection C1 is query based and the C2 would be a static one.
If i use the same A1 advert, will it affect the earlier linked C1 collection i any ways?
System Security analyst at CapG

Well, in 2007 you actually kind of can. You can used linked collections to make C2 a linked sub-collection under C1 and ensure that the advert applies to sub-collections.
Jason | http://blog.configmgrftw.com | @jasonsandys

TS2755 keep receiving the same text message multiple times, at the same time of the night. How can I stop this?Thabnks

Hi
I keep on receiving the same text message multiple times and at around the same time each night. Any idea how I can stop this happening? The text messages are originating from to separate Saudi Arabian mobile numbers. Both these people are listed in my contacts so do you think if I delete their names it might stop the texts coming htrough each night?
Cheers

Deleting the people from your contacts will not stop the messages. Have you tried talking to the people and finding out if they're sending you messages? You could try contacting your carrier and finding out what blocking services they offer. However, theat would block all messages from those people.

Re: Running the same (Forte) application multiple times -for different

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi
We had the same problem - how to deploy a number of identical applications, using each their own db.
(for training).
The solution we used is to wrap the entire application into different applications by using a very small
module called KURSUS01, KURSUS02 etc, that did nothing but call the start procedure of the main app.
Then in the dbsession connect, we made a call appname to get the application name, and appended the
first 8 chars to the dbname. Thus our dbnames now points to logicals name: rdbdataKURSUS01, rdbdataKURSUS02 etc.
All this allows us to deploy the identical apps in the same env, or change one version, and run both the old
and new program on the same pc and server at the same time (eg. KURSUS01 and KURSUS02).
I also think this is a kludge - but it works nicely!
Jens Chr
KAD/Denmark
-----Original Message-----
From: Haben, Dirk <[email protected]>
To: 'Soapbox Forte Users' <[email protected]>
Date: 15. januar 1999 09:41
Subject: Running the same (Forte) application multiple times - for different business clients.
Hi All
We have a number of different business clients all willing to use our
application.
The (forte) application is to run on our machines etc for these (business)
clients.
All (business) clients will have their data kept in separate Oracle DBs
(instance).
The problem now is that the entire (forte) application is written using
DBSessions.
Now, depending on what business client needs to be serviced (so to speak) we
need to attach to the right DB - or use the "right" SO.
The two options we can think of are:
Option1:
Programatic change to somehow "know" what (business) client (DB) I'm talking
about and then use the right DB.
Pro:
Only one forte environment to maintain
Can run multiple (business) clients on same PC at the same time
Con:
Requires many program changes
bending O-O rules(?)
can't dynamically name SOs so can it be done at all? (ResourceMGRs maybe?)
Option2:
Use separate environments! One for each business client.
Pro:
More defined separation of app and data,
SLA-easy
Con:
Maintain "n" number of environments
Can only run the application for one environment (business client) at a time
on one PC - Big Negative here!
Not knowing any feasible solution to option 1 (without much code changes and
developer moaning) I would go for option two; as I have already worked on
multi-environment setups on VMS back at the Hydro (hi guys).
I would appreciate any comments from anyone who has solved this problem.
How, Why Pro Con etc.
TIA,
Dirk Haben
Perth, WA
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Using the same library with multiple computers over a network Use Aperture

Hi Everyone. I am researching some cataloguing/editing programs to recommend one to my boss, and I was wondering if it was possible to use the same library between multiple computers on a network. Does anyone know if this is possible? This may be what makes or breaks the decision on whether or not to go with Aperture as we need a program that can access a large database of photos on multiple computers.
Thank you.

Welcome to the forum.
You can do it, but...
It's not supported by Apple.
Performance won't be great unless you're running a really fast network.
If more than one person tries to access the Library at one time you're likely to end up with a corrupted database, and there's no code in Aperture to limit access to one person at a time.
The Library must be stored on an HFS+ volume - don't even try putting it on a FAT32-formatted drive.
If you want 'proper' multi-concurrent-user network-enabled cataloguing software you're looking into a whole different level of investment than the low price of Aperture - think more in terms of thousands or even tens of thousands of dollars.
Ian

Set the same dimensions to multiple objects

Similar Messages

Maybe you are looking for