"Set variable value" topic

Hi evry!
My vi sends some value of "cluster" type to RT-machine's vi by means of "Set variable (variant).vi", wich, in turn, answers with Error #2: Memory is Full!
How can be that?
Thanx in adv, guys!
P.S.: All versions are 8.2.1.

Hi Sharonoff,
Thanks for contacting National Instruments. I have been looking into your question a little more and I have some helpful links for you that I think will help you out. This error is pretty self-explanatory in the fact that the system you are running the VI on is running out of memory. The links attached below should give you some good guidelines on what to do with managing large data sets trying to avoid this error. I would particularly pay attention to the article entitled "Managing Large Data Sets in LabVIEW." However, you want to try and limit the size of the data in the cluster that you are sending to the RT-machine as it may not have a large amount of virtual memory that it can use to handle your data. Please look over some of these documents and try out some of their methods. If you have any more questions, reply back and we can go from there. Thanks!
http://zone.ni.com/devzone/cda/tut/p/id/3625
http://digital.ni.com/public.nsf/allkb/CBEBDC184655FC8C8625724A00050854?OpenDocument
http://digital.ni.com/public.nsf/websearch/C3C516C11184AF3F862571B5006B46E1?OpenDocument
http://digital.ni.com/public.nsf/websearch/BC911F0893A4627586256BB10076E90C?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3561
Regards
Noah R
Applications Engineering
National Instruments

Similar Messages

How to set variables values via VBA.

Anybody please help.
How to set variables values via VBA in workbook. SAP Netweaver 2004s.

Pass variable values with VBA and BI 7.0 funtions to Query
At first a remark u2013 Iu2019ve read a lot of threads saying that passing values to a query can be done by using VBA code only. Iu2019ve tested it but Iu2019m not sufficient with the new BEX 7.0 API and therefore I use a mixture of BEX 7.0 funtionality and VBA. I create a BEX 7.0 design item button passing the values to a query u2013 I hide this button somewhere on the sheet or on a hidden sheet and I then raise the event to click the button from VBA code. Works fine and the maintenance is easier if something changes in the API in the future again.
How to start:
Switch to design mode in BEX Analyzer:
Implement a BEX 7.0 design item u201Cbuttonu201D
Click on the button to implement the properties
Make the input for the commands
data_provider = dataprovider_1
cmd = process_variables
subcmd = var_submit
No comes the part with the variables u2013 Letu2019s assume a query has 4 variables but you only want to change 1 with the button u2013 an organizational unit for instance.
Make a range somewhere in the excel with the following structure:
Name    Index   Value
VAR_NAME_1      1       Variablename
VAR_VALUE_EXT_1 1       variablevalue
Value should contain the name of your variable of course and u201Cvalueu201D the value of your variable
Set a name for this range with EXCEL functionality but without the header:
Back to the properties of the button: Insert the name of the range with the variables in the field Command Range:
If you have more variables to process you can of course enhance your Filterrange!
In the left upper Corner you have a name for your button:
Now you can raise the button-click in vba like this:
Application.Run "'" & ThisWorkbook.Name & "'!Sheet2.BUTTON_35_Click"
regards, Lars

How to set variable value in an XML array

Hi,
Please let me know how to set the value for a xml array element using assign activity inside a for-each block in BPEL 11g
I tried to set the variable value for result element using the below condition but i encountered selection failure message
$outputVariable.payload/ns1:Student['i']/ns1:result or
$outputVariable.payload/ns1:Student[$i]/ns1:result
And the xsd used is as below
<xsd:complexType name="StudentCollection">
<xsd:sequence>
<xsd:element name="Student" type="Student" minOccurs="0" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Student">
<xsd:sequence>
<xsd:element name="Name" type="xsd:string"/>
<xsd:element name="location" type="xsd:string"/>
<xsd:element name="mark" type="xsd:string"/>
<xsd:element name="result" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
Thanks,
Dhana

Hi,
At the back of button specify the following parameter:-
CMD    1        Execute_planning_function
Planning_function_name 1   xyz
Var_name     1    variable_name
var_value      1    blank
Can also refer to link below:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954?quicklink=index&overridelayout=true(can refer to page 20)
http://www.sdn.sap.com/ddc5564a-337d-4cf9-a34e-2dab64df09be/finaldownload/downloadid-a61a6724ba8e7b7fbd9c5df9590ab50d/ddc5564a-337d-4cf9-a34e-2dab64df09be/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Hope it may help

Set variable value from a query - is it possible?

Hi all,
I need to use a 'precalculated' value in my report measures' calculations.
Is it possible to set a variable value as a result of a query?
Thanks in advance,
Alex

Hi,
In my report, I need to calculate one of the columns as a [certain measure] / [result of another query]
I didn't succeed to include the [result of another query] as a column in my report's request, but it would be very easy to calculate this [result of another query] separately.
The [result of another query] value is same for all the rows of my report.
What I'm trying to do is to run a query before my report (e.q. in the Prefix section), set a variable = [result of another query] and then use this variable in the column calculation of the report.
Is this possible?
Thanks,
Alex

How to set variable values in Stored Procs

Hi all,
please excuse my newbie questions - I've spent too long using SQL Server......
Anyway,
I'm playing with SP basics and was wondering how I can set a variable value in a stored proc, ideally getting a value from a table or some select .
for instance...........
CREATE OR REPLACE PROCEDURE RPT_SP_ANT_TESTING
P1 IN NUMBER,
P2 IN VARCHAR2
IS
TmpNum NUMBER;
TmpStr VARCHAR2(255);
BEGIN
--How do set these?
SET TMPNUM := SELECT Count( * ) FROM ALL_TABLES;
SET TMPSTR := P2 + '_APPENDED';
INSERT INTO TEST_TABLE
( STRINGFIELD, NUMBERFIELD )
VALUES
( TmpStr, TMPNUM )
END;
Regards
DC

Some ways are...
setting directly
x := 1;
setting from a select use INTO clause
select 1 into x from dual
setting from a select into a collection type use BULK COLLECT INTO
select name bulk collect into lName from your_table.
It would be better if you read the document.
Thanks,
Karthick.

How to set variable value in BEX analyzer for IP Layout

Hi All,
   I have created a simple planning function to copy data from one account to another and I have used mandatory selection variable for Fiscal year /period. When I execute the planning function through Planning modeler I get the prompt for the variable and the planning functions execute without errors and return the values. But now when I design the Bex workbook using my Input ready query that have button to execute the planning function,I don't get the prompt for the mandatory selection variable. I need to set the variable vaule in design mode then the function return the values. Is there way to get the prompt for the variable when I choose to execute the planning function. Also is there a option in Web application designer too?
Please let me know what I'm missing.
Appreciate you help.
regards,
Balaji

Hi,
At the back of button specify the following parameter:-
CMD    1        Execute_planning_function
Planning_function_name 1   xyz
Var_name     1    variable_name
var_value      1    blank
Can also refer to link below:-
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954?quicklink=index&overridelayout=true(can refer to page 20)
http://www.sdn.sap.com/ddc5564a-337d-4cf9-a34e-2dab64df09be/finaldownload/downloadid-a61a6724ba8e7b7fbd9c5df9590ab50d/ddc5564a-337d-4cf9-a34e-2dab64df09be/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Hope it may help

WAD drop-down box and commands on Set Variable values/ Set Filter Values

Hello to all
I am confused in WAD and Help online couldn't clarify my concerns. Thus here following issue:
I am using a WAD, where the data provider (query) is set dynamically. I would like that
1 user selects company in drop-down-box 1
2 I use commands on drop-down-box 1 to manage the next drop-down-box 2 ( like it becomes input ready)
3 user selects plant in drop-down-box 2
4 User selects a tab strip A, where report A of multiple reports is placed. Now in this moment I assign the query A to the data provider A.
Now my questions:
- I am not clear how to use the bex-variables required for the query ( like company and plan). If I use in drop-down variables, then I can't set anymore commands
- What means and makes the command set_variable_state
- What means and makes the command set_selection_state
Thanks a lot for your clarification and help
Christian

Hi Christian,
I will try and answer your Qs
- I am not clear how to use the bex-variables required for the query ( like company and plan). If I use in drop-down variables, then I can't set anymore commands
>> Can you explain how exactly are you trying to populate the DropDown webitems for Company / Plant data for user-selection.
- What means and makes the command set_variable_state
>> SET_VARIABLE_STATE is used to assign input values to your query variables. Here, the command gives you a range of input options to select from such as Characteristic/Text/Formula/Hierarchy Variables & Binding Type Selection. Binding Type Selection in addition gives you more options such as assigning manual input from a Text webitem [ITEM_INPUT], assigning value from another Variable [VARIABLE], or simply assigning the selected value from an underlying Data Provider such as one mapped to a DropDown webitem [DATA_PROVIDER_CHARACTERISTIC].
- What means and makes the command set_selection_state
>> SET_SELECTION_STATE is used to assign input values to Characteristics in your query. It serves as a Filter option.
I think in your case using SET_VARIABLE_STATE makes more sense. You can use Binding Type Selection with [DATA_PROVIDER_CHARACTERISTIC] on both the DropDown webitems to assign the values of Company / Plant to the query on runtime.
--Priya

How Can I Dynamically Name and Set Variable Values?

First one with a correct answer will have the FUNCTION named after them......
What I want to do is create 'new' variables based on the index of the parent.
So, if I have 4 subforms called 'Panel' (Panel[0], Panel[1], Panel[2], Panel[3]), I want do declare a local variable in my function to count from 0 to n for each Panel.
We won't know how many Panels we will have until runtime. So, I need the variables to keep track of the count (it's tracking the number of errors) - for each Panel.
Something like this:
if(obj.rawValue==null || obj.rawValue=="")
var errorCount[obj.parent.parent.index]=errorCount[obj.parent.parent.index]+1;
app.alert(errorCount[obj.parent.parent.index]);
I am assuming it has something to do with Arrays. But I suck at Arrays.
Thanks for the help.

You're correct, arrays are the way to go. Define your error array like this:
var errorCounts = [];
Then, understand that when an array entry is not set it will have the value 'undefined', so you can know if an entry has been initialized. So to increment the count for a particular index (subform occurance) use:
// If entry is being set for the first time, set it to 1. Otherwise increment count.
if ( errorCounts[index] == 'undefined' )
errorCounts[index] = 1;
else
errorCounts[index]++;
You can also loop through and initialize the array to zero; then you can remove the check for undefined. How and where you do this and how you figure out what 'index' is depends on how your form is set up and which event you're using to kick off the error check. Give me a little more detail on what you're trying to do.

One workbook, 2 identical queries, different variable values

We have a query which has a number of user-input parameters - Cost Centre, Year, Material etc.
We wish to embed this query twice in a BEx Analyser Workbook - with the same values for Year and Cost Centre, but each with a different Material.
What we are looking to do is make Year and Cost Centre global for the workbook, but Material to be variable. From what I can see our only option is to switch off the ability to collectively process all variables.
Thus my questions are:
1. Is there any way of selectively defining which variables to process during refresh?
2. Is there any other way of setting variable values (properties, macros etc)
Many thanks!

Hy,
try the bexgetdata available in Nw2004s/bi.
You generate 1 dataprovider in your workbook (maybe query with businessunit,
cost-centre, material, year and month + further in rows )
Embed the queryresult in your workbook.
Convert the result to formular (bexgetdata)
Now all cells have a formula (bexgetdata) with cell-adresses to the criterias.
For example, create a mastersheet and place year and period (central-variables).
Insert cells/rows at the top of each sheet (business-unit) and fill in the value for businessunit.
Now change the bexgetdata-formula, instead of the references in rows, refer to the
cell-adress of mastersheet and to the cell-adress of each workbooks.
You can use excel-functionality to copy all new formulas in each cell.
You can also copy the formula to each worksheet.
Delete all the lines you do not need. (Deleting the lines will not reduce the
result of the query!)
So you have one query (with a large selection) and you can place different
sub-results to the sheets.
Regards
Roland

Show or Hide fields based upon a variable value

Hi,
I am a rookie in the field of Acrobat. And my only question is :
How to Circle a Form Field based upon a variable value .
For example, If x=1, I want to circle Japan and if x=0, I want to leave it without any change.
Please help me out. Thanks for your time and help.
Thanks,
Vijayvijay77.

Hi George,
I am pre-populating a Pdf file based upon the data submitted by the user. And I have to circle options selected in the form.
I am writing coldfusion code to flatten, populate the form into a PDF form. The end result is the PDF generation with all the data in it.
The data comes from the database, where I set variable values if any is selected or not.
Thanks for your reply, I really appreciate your help.
Vijayvijay77.

IB settings Variable Values Change

Hello All,
I am strugling a lot with Broadcasting the workbooks with using the multi channel. every time i am updating the variable values in IB setting before broadcasting. Is there any process to change the IB setting variable value automatically.
Thanks
Aravinda

Hi Suvarna,
Sorry for delyed reply.
we have our own payroll calender month and year maintained in SAP BI system by mannually. lets say for example payrol calender for oct is 21st sept to 24 oct. so 25th or 26 i need to broadcaste the reports. now my variables has to change automatically based on the reporting calender.
ex. i am using payroll month and year as a variable. i have written the cusomer exit to fill the variables.
normally when i execute the workbook values are refreshing. but whn i was broadcaste the report,variables were not refreshed.
so everytime i am changing the IB setting and broadcasting the reports.
Thanks
Aravinda

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

Getting error 025036 while setting bind variable value

Hi,
I have created a view object (ViewObj) having bind variable (Bind_Val).
I am writing custom java method in AppModuleImpl.java, so that I can use that in serviceInterface.
my method is:
public void Met(String a){
ViewObjImpl vo=new ViewObjImpl();
vo.setBind_Val(a);
I tried the below method also:
public void Met(String a){
ViewObjectImpl vo=new ViewObjectImpl();
vo.setNamedWhereClauseParam("Bind_Val",a)
But when I am running the AppModuleServiceImpl.java and select the Met method and pass the value for a. It is giving me error 02036.
How to set the bind variable value in AppModuleImpl.java??
Thanks,
Rohit

Hi Frank,
Thanks for reply. It was helpful.
Please go through the below mentioned two queries.
My sql query is:
SELECT Message.MESSAGE_ID,
MessageProp.VALUE,
MessageProp.MSG_PROP_ID
FROM MESSAGE Message, MESSAGE_PROP MessageProp
WHERE (MessageProp.Key='From' OR MessageProp.Key='To')AND Message.MESSAGE_ID = MessageProp.MESSAGE_ID And MessageProp.Value='B'
and I have created one view criteria where I am giving the condition as MessageId=:Bind_MessageId.
And then I am executing my findViewCriteria method from AppModuleServiceImpl where I am passing the value for Bind_MessageId and I am getting the output as I want.
Now I am modifying my query as:
SELECT Message.MESSAGE_ID,
MessageProp.VALUE,
MessageProp.MSG_PROP_ID
FROM MESSAGE Message, MESSAGE_PROP MessageProp
WHERE (MessageProp.Key='From' OR MessageProp.Key='To')AND Message.MESSAGE_ID = MessageProp.MESSAGE_ID And MessageProp.Value=:Bind_Value
and setting the value for :Bind_Value programatically as:
public void test(String s){
ViewObjectImpl view = this.getViewObj1();
VariableValueManager vm = view.ensureVariableManager();
vm.setVariableValue("Bind_Value",s);
**Note- I have written this custom method in AppModuleImpl.java class
Then firstly I am executing test method from AppModuleServiceImpl to set the value for :Bind_Value. After that I am executing findViewCriteria method but then I am not getting any record.
**Note-I am not getting any error.
I want to set Bind_Value programatically and then I want to execute my FindViewCriteria from serviceInterface.
Thanks,
Rohit

How to set a value to a Presentation Variable using GO URL?

Hi All,
     I am working on a drill (GO URL) from Dashboard page1 to Dashboard page2.
     The problem I am facing is, I am not able to pass a value to the presentation variable through GO URL. (I have to pass "Customer Category" static
value to The presentation variable present in Dashboard Page2 ).
     The Dashboard page2 is having a view select in which we are using presentation variable to select the report based on the value selected in
View Select.
     For example: If the user selects "Customer Category" value in View select and clicks on GO button Customer Category report will show the out put.
     When i am drilling from Dashboard Page1 I have to pass a value to the presentation variable used in view select and also pass some filter condition in
     GO URL.
     Please let me know if it is feasible to pass a value to the presentation variable through GO URL in OBIEE 10.1.3.4.
     It will be greate if you can provide me with the syntax to set a value to the presentation variable of dashboard page2 through GO URL.
Thanks and Regards,
Sagar Vishwanathwar.

1) You have to navigate to dashboard page, not to answer request = you have to use "Dashboard URL API" not GO URL API.
2) On the target page, you have to place dashboard prompt, which sets required presentation variable.
3) Refer to the target using Dashboard URL API and set filter on prompt column using URL parameters. Example: http://localhost:9704/analytics/saw.dll?Dashboard&PortalPath=%2Fusers%2Fadministrator%2F_portal&Page=page%201&Action=Navigate&P0=1&P1=eq&P2=D_TIME.YEAR_CODE&P3=%221996%22
Do not forget to use Action=Navigate. The syntax for setting filters using url parameter is the same as for GO URL API described in Business Intelligence Presentation Services Administration Guide.
This is the way, you can implement navigation to parametrized direct SQL reports including passing filter values...
Regards K.

HOW to set the value attribute of FORM INPUT data to a variable in a JSP

eg. Registration.jsp
The data is accessed from an hidden field called course
for example, if I have "Java programming" in the field course, and I use
an expression to access the value from the hidden field.
**My problem is that the data gets truncated to "Java" , I need "Java Programming"to display. The code looks like this
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<INPUT TYPE="text" SIZE=12 NAME="course"
VALUE=<%=getParameter("course") %>
IS there ANY OTHER WAY to set the value of VALUE to a variable?

Instead of value=<%=request.getParameter("course")%>
Use double codes
value="<%=request.getParameter("course")%>"

"Set variable value" topic

Similar Messages

Maybe you are looking for