Setting a transient attr on the EO changes the state to modified.

Hi,
Is this behaviour correct? How do i avoid this except to keep track of the state before and after setAttributeInternal() for this attribute?

Thanks Sascha,
I am updating from a ViewRowImpl with type-safe getters and setters that were originally generated by the wizard. What you are suggesting is to replace the setAttributeInternal() with populateAttribute().
Where did you find documentation about this? - the API is a bit lean on this issue.
I am a bit hessitant on changing wizard implemented methods as the are easily overwritten when the wizard is accessed again.
I write audit records away at EO level based on the EO's state.
At this stage, as a work around, we just check if the attributes other than the transient ones changed to trigger the audit process rather than the EO state.
Thanks again.

Similar Messages

  • How can I set default value to a transient parameter  in the VO

    I have created a transient parameter in the VO, which is type of boolean.
    When I try to input the "true" or "True" or "Y" in the 'default value',
    and then running the programm, but all failure.
    so I don't know how can i do.
    Genuinely waiting for you help, thanks in advance.

    Hi Sumury,
    First of all you could check if this transient attribute is read only. to check this, edit the VO and select the transient attribute under the Attributes tab. Then verify if it is marked as "Updateable Always" on the right-hand section.
    If it is updateable, then try setting the default value on the VO Implementation class: open the xxxVOImpl class, go to the transient attribute's setter (setxxx()) and change it to:
    <code> if (getXXX() == null) setAttributeInternal(XXX, "Y");
    else setAttributeInternal(XXX, value);</code>
    This might work. If it does not, then please post the exact message you are receiving when running the app.
    Hope this helps!
    Thiago

  • I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of y primary. How can I change it back to my primary account?

    I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of my primary account. How can I change it back to my primary account?

    Hey bjboles,
    Welcome to Apple Support Communities.
    The article linked below describes what to do after changing your Apple ID, but you can use it as a guide to resolve the incorrect Apple ID account information entered issue that you described.
    Apple ID: What to do after you change your Apple ID - Apple Support
    Ciao, 
    -Jason

  • HT4759 I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

    I now have my daughters iPad can you please tell me why I can't set up iCloud.in settings the iCloud is greyed out also how do I change her mail account to mine?

    To change your iCloud ID or password you have to go to Settings>iCloud, tap Delete Account, then sign back in with your other ID.  If you need to migrate any of your daughter's iCloud data to your account, choose Keep on My iPad when prompted, then choose Merge to upload it to the new account.  If not, choose Delete from My iPad.

  • I set my passcode in arabic then I changed the language to English, when I wanted to open my ipad later there was no arabic letters to enter my arabic passcode..and I am not able to use my Ipad again please let me know what to do

    I set my passcode in Arabic then I changed the language to English, when I wanted to open my ipad later there was no Arabic letters to enter my Arabic passcode..and I am not able to use my Ipad again please advice me what to do

    Hello Shaholeh87,
    Do you see a Globe icon on left hand side of your Spacebar if yes try pressing that and see if you get an option of changing the keboard language (this will work if you have Multiple language set on your iPhone from Settings>General>Keyboard>International Keyboards and added a keyboard in Arabic Language before )
    Or you can get your iPhone in Recovery Mode and Restore it to Factory settings but you will lose all your current Data that you have on your iPhone.
    To Restore your iPhone by taking it in Recovery Mode you can follow the below steps :
    Follow the process mentioned below step by step to get your iPod Touch/iPhone/iPad working.
    Make sure you have Latest Version of iTunes (11.1.3) Downloaded and Installed on your Computer, if not then you can download the latest version of iTunes from the Link below.
    http://www.apple.com/itunes/download/
    Now once you have the Updated version of iTunes installed on your computer follow the below steps to get your iPod Touch/iPhone/iPad in Recovery Mode and Then restore it to factory settings
    Open iTunes Application on your computer and then start the process step by step
    1>Disconnect your device from the computer (if connected). The process won’t work if you start with the iPod Touch/iPhone/iPad connected to the computer. Leave the cable connected to the iPod Touch/iPhone/iPad, as you will be reconnecting the iPod Touch/iPhone/iPad to the Computer later in the process.
    2>Power down your device. Turn off your device by holding down the Power button ( On Top right corner of iPod). When the power slider appears, slide it to the right. Wait for your device to comepletely shut down before continuing.
    3>Press and hold the Home button (Home Button is located at bottom of your iPod Touch/iPhone/iPad screen/display). With the Home button held connect the device to your computer with the USB cable. When reconnected, your device should turn on.
    (If the low battery screen appears, charge your device for a few minutes and try the process again.)
    4>Continue holding the Home button. After a few moments, you will see the "Connect to iTunes" screen on your device. This screen is a picture of an arrow pointing from a USB cable to the iTunes logo. When you see the screen you can release the Home button.
    5>iTunes will display a message stating that a device in recovery mode has been connected. From there you can proceed to restore your iOS device. Once you see this message click on OK and then click on Restore
    Once you click on Restore iTunes will download the Latest available version of iPod Touch/iPhone/iPad software (ipsw file) in your computer and after the download is completed the same will be restored in your iPod Touch/iPhone/iPad. You will see the Download process and Restore process on top of your iTunes screen. Once the restore is completed your iPod Touch/iPhone/iPad will automatically restart and you will see a message that iPod Touch/iPhone/iPad has been Restored and will connect after restart.
    Now you will have to follow some steps on your iPod Touch/iPhone/iPad to Customize your Device for First Use.
    Hope this process will help you

  • When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    When I load certain websites the the writing is all squashed up. I correct this by changing the character encoding setting. I am using the latest Apple Mac machine. Thanks in advance

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)

    Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501.  This arrived with Signal Express, which I intend to use as a Lite version.  I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs?  I have this working on a 0.1sec sample period and can interrogate the logs after recording.  Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured?  Cheers.

    Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
    Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
    Sorry about that

  • Is there a change history for the STAT retention setting?

    I've been told that the setting that controls the retention period for the STAT files is maintained by the ST03 transaction.  (Export Mode / Collector and Performance DB / Workload Collector / Control Data.)
    Is there any kind of change history kept on this setting, or any way to look at what this setting was in the past?  We are on SAP Basis version SAPKB62061.
    We had this setting originally configured to 72 hours in order to allow us a longer recovery time for problems with FireFighter activity capture.  Now the setting is at 48 hours.  This has actually caused us to be missing some FF activity.  Had some failures on the FF Log Update job from last Friday night and when I went in to manually run the job to capture the missing FF activity, the STAT data is missing.
    Need to see if I can determine who changed the setting, and when.
    Thanks.

    Welcome to the Apple Community William.
    Unfortunately, there isn't anything like that available to you.

  • How can I change the state in the shipment info in the account setting?

    How can I change the state in the shipment info in the account setting?
    I was trying to buy an Apple TV from the store but, I live in Italy and at the moment (for long time) I'm in Deutschland.
    From the shipment information i didn't find the possibility to change the state. From default is ITALY but I need to receive in Deutschland.
    Did somebody know how to???
    Thanks in advance!!!

    Hi 7oaksGaz,
    1) Due to tax reasons, it's not possible to change the country associated with an existing Adobe ID.
    Follow the steps mentioned in the below link as a workaround to create an Adobe ID with the email address you currently use for the existing Adobe ID.
    http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    2) You can change the language of the application from AAM preferences
    Please find the link below for the article with the steps
    http://helpx.adobe.com/creative-cloud/kb/creative-cloud-trial-mode.html
    Thanks!
    Eshant

  • I have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot see to do it help please

    i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?

    Mail/Preferences/Accounts
    Use the - and + signs to delete or add your new Accounts
    see
    http://support.apple.com/kb/PH4928
    Mac 101
    http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts

  • How do I set a different folder than the Windows MyDocuments/Downloads folder? I do not use 'My Documents' at all, all my saved files go to other hard drives for storage, and I do not want to bother with the My Docs route. I used to have downloads set to

    I want to set a different folder from the My Documents/Downloads folder for Firefox to put everything I download, like I used to have it. I recently rebuilt my computer and reinstalled everything from WinXP to security software to Firefox, and I cannot find any options anywhere to set a different folder like I used to have it... with the same software, other than it being a newer iteration of Ff. So tell me, am I losing my mind so bad that I just can't remember how I did it before, or have things changed so much that what I want is no longer possible? Please, someone tell me how to set it to do what I want, I can't stand to have what I do on my computer dictated by programmers who only think that they know what people want. If that sounds a little angry, I apologize with the disclaimer that I suffer from Post Traumatic Stress Disorder and therefore cannot handle frustration... and this kind of thing frustrates me to the point of rage.

    Tools > Options - General tab = Downloads
    Set your preferences there.

  • How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    Phone A = phone with information you want duplicated
    Phone B = phone that you want to copy from A
    Backup Phone A.
    Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
    When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
    After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

  • How can I set #HOST# variable referenced in the Chart template?

    #HOST# and #HOST_PROTOCOL# are being set incorrectly by APEX from CGI variables when I create a chart. I am using APEX 4.1 and Oracle 11g. The get the continual "Loading data..." and then after it times out I get "Error loading file".
    Before we changed to a secure http environment, our charts worked. After we changed to the new web layer, the charts do not work. The #HOST# substitution was set to http://correctservername/ and #HOST_PROTOCOL# was set to http. We set PlsqlCGIEnvironmentList REQUEST_PROTOCOL=https in the dads configuration file and now the #HOST# displays https but it also includes the default port number which we do not want (https://correctservername:port/) The charts work without the port. REQUEST_PROTOCOL is not in the cgi list and setting this variable set #HOST_PROTOCOL#. What variable can we set to make #HOST# correct. It seems like #HOST# is being set by #REQUEST_PROTOCOL#'://'||HTTP_HOST||':'||SERVER_PORT||SCRIPT_NAME||'/'. SERVER_NAME could also be used in of HTTP_HOST. I don't know how APEX is setting #HOST#. Does it come from a host alias somewhere in the environment?
    I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.
    I would rather not create a global variable (hard-coding) and create a new chart template using the global variable or create a before header application process to re-direct url without a port.
    Edited by: Donna C-Houston on Oct 10, 2012 1:06 PM

    Hi Donna,
    changing the CGI environment variables HTTP_HOST, REQUEST_PROTOCOL and SERVER_PORT is the correct way how to resolve this, because it appears that your hiding the web server where you have installed mod_plsql or EPG by a different outside facing web server (also called reverse proxy). That's why APEX gets the host name, protocol and port of the internal web server, but should actually get the values of your reverse proxy web server. Can can fix that by changing the following CGI environment variables.
    HTTP_HOST should just contain the domain name (no protocol or port). For example: www.oracle.com
    REQUEST_PROTOCOL should contain http or https
    SERVER_PORT should be the port for https
    I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.The value of HTTP_HOST is wrong anyway and points to your internal web server, but I assume your developers actually want to get the host name of your external web server if they use it to generate absolute URLs. That's why I wouldn't bother and set it to the correct host name.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • When I set (on two different computers) the Location Bar to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox.

    When I set (on two different computers) the Location Bar option: When using the location bar suggest: to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox. I am using the latest vesion on Win8 on both computers. One has Bitdefender the othe McKafee. I have no obvious Addware, I use Iobit Uninstaller Advanced Care and and Driver manager on both computers. Until now I have always used Firefox as I refuse to use Explorer and I do not want to have to use Opera or another browser instead.
    Can you please help?

    Have you seen this general article: [[How to fix preferences that won't save]]?
    Also, this might be a glitch with using automatic private browsing mode. Some settings changes might not be saved in that mode.
    If all else fails, do you want to try a manual hack?
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window (Windows Explorer window) showing your current settings files.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then open '''prefs.js''' in a text editor by right-clicking it and choosing Edit or Open With. (Double-clicking leads to Windows attempting to execute it, so I do not recommend that.)
    Paste this at the end of the file on its own line:
    user_pref("browser.urlbar.autocomplete.enabled", false);
    Then save the file and close your editor.
    Start Firefox back up again. Did the manual change work?

  • What is the best way to set up multiple devices in the same household?

    Our family has a bunch of devices (phones,pads,pods) all set up under the same appleID.  The idea was to be able to share iTunes content among devices.  The problem is that there is personalized data merging between devices (address book, apps, etc).  Is there a way to set up multiple devices under the same account while maintaining their own identity so that Each user can have their own apps, addresses, etc without having to sift through everyone else's stuff?

    Continue to share your iTunes ID, but use different IDs for other services such as FaceTime, iMessage and iCloud.  (When you share the same iCloud account across multiple devices, any synced data is merged and the merged list appears on all devices sharing the account.)
    To change the ID For:
    iMessage, go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID sign out, sign back in using the other ID.
    FaceTime, do the same thing in Settings>FaceTime.
    iCloud, you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On [iDevice].  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.  Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want in each account (such as deleting the other person's contacts from your account, and vice versa).
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/.

Maybe you are looking for