Setting Alert for Project Plan deviation and changes

Hi
I am trying to figure out if there is any alert function (automatic email sent) for project plan deviation
For example: original planned milestone date reached while the status has not yet marked complete
Also, I would like to check if there is any notification to senior management can be set if somebody change the project plan.
Many thanks,
Norine

You need to create a UDM based on a SQL Query.
If you want an alert of elapsed_time of a sql query, you can to query the v$sql and if you want history results you can query the dba_sql_history.
If you need help with the sql send me a mail to [email protected]

Similar Messages

I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched. Was is this happening?

http://support.apple.com/kb/he57?viewlocale=de_de
India
(91) 1800 4250 744
www.apple.com/in/support/
hope it helps

IDoc Configuration for Production Order Creation and Change

Hi All,
Please Help me out for IDoc Configuration for Production Order Creation and Change
I have found the IDoc for Production Order
Messgae Type : LOIPRO and IDoc type : LOIPRO01
Actually my requirment is to send the (LOIPRO01 )IDoc from SAP R/3 to XI system ,when ever the Production Order Created and Changed,
I have done following Configurations:
1. RFC Destination created for XI system
2. PORT was created for XI
3. Partner profile created WE20 and LOIPRO01 IDoc is added in OutBound Perameter.
I need to know how to do the followning.
1. How do i configure the outbound Production order idocs when Production Order is created or changed.
2. in NACE (Output control) which is the Application for Production Order.
3. How can I set IDoc as output Type for Production Order Creation.
Thanks in advance
Dhanabal T

Hi Michal,
I know that it is the old thread but still want to get clarified from you out of curiosity.
Unlike other IDOC, i actiavated change pointers for LOIPRO
1.message and idoc type is linked
2.function module , message type , idoc type is linked
function module used is CLOI_MASTERIDOC_CREATE_LOIPRO
3.BD64, distribution model is created and distributed
4. port and partner profile is in place.
5. IDOC is not getting generated after creating the process order.
do we need to activate the change documents for the message type in BD52,
if yes can you please provide the object types for the same.
or i am missing something else. please guide me in this regards.
Thanks in advance for your time.
S.Janagar

Alerts for Projects

The Vision Instance shows 6 Alerts for Projects Modules.
However, my Development Instance doesn't show any alert for projects .
we are implementing costing , billing & Prj Contracts.
Pls help.

Hi dina,
First of all ..thanks for your prompt replies..
In my question i am refering to Seeded Alerts(triggered to mails) provided by Oracle for each module.
Run the following query to view Oracle seeded Alerts for projects in Vision Instance:
SELECT DISTINCT fef.APPLICATION_NAME,
aa.ALERT_NAME,
aa.DESCRIPTION
FROM
FND_EXECUTABLES_FORM_V fef,
ALR_ALERTS aa
WHERE
aa.APPLICATION_ID=fef.APPLICATION_ID
and fef.application_name IN('Projects')
AND aa.ALERT_NAME NOT IN '%'
ORDER BY
fef.APPLICATION_NAME,
aa.ALERT_NAME
this query returns 6 alerts for vision instance
But none for my development Instance !!

SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007

Can you please help me to write an SQL Query to get Project Plan Name and Resource Name from Reporting database of Project Server 2007. Thanks!!

Refer
http://gallery.technet.microsoft.com/projectserver/Server-20072010-SQL-Get-a99d4bc6
SELECT
dbo.MSP_EpmAssignment_UserView.ProjectUID,
dbo.MSP_EpmAssignment_UserView.TaskUID,
dbo.MSP_EpmProject_UserView.ProjectName,
dbo.MSP_EpmTask_UserView.TaskName,
dbo.MSP_EpmAssignment_UserView.ResourceUID,
dbo.MSP_EpmResource_UserView.ResourceName,
dbo.MSP_EpmResource_UserView.ResourceInitials
INTO #TempTable
FROM dbo.MSP_EpmAssignment_UserView INNER JOIN
dbo.MSP_EpmProject_UserView ON dbo.MSP_EpmAssignment_UserView.ProjectUID = dbo.MSP_EpmProject_UserView.ProjectUID INNER JOIN
dbo.MSP_EpmTask_UserView ON dbo.MSP_EpmAssignment_UserView.TaskUID = dbo.MSP_EpmTask_UserView.TaskUID INNER JOIN
dbo.MSP_EpmResource_UserView ON dbo.MSP_EpmAssignment_UserView.ResourceUID = dbo.MSP_EpmResource_UserView.ResourceUID
SELECT
ProjectUID,
TaskUID,
ProjectName,
TaskName,
STUFF((
SELECT ', ' + ResourceInitials
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceInitialsCombined,
STUFF((
SELECT ', ' + ResourceName
FROM #TempTable
WHERE (TaskUID = Results.TaskUID)
FOR XML PATH (''))
,1,2,'') AS ResourceNameCombined
FROM #TempTable Results
GROUP BY TaskUID,ProjectUID,ProjectName,TaskName
DROP TABLE #TempTable
-Prashanth

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

Urgent!! How to update Planning book and change when planning will start

Hi Gurus,
I had configured the system and we can initilize planning area every month and my question is
1. How to update planning book and change planning start date every month?
Thanks a Lot
Regards,
Raj

Hi,
In the planning book-dataview, you will assign the time bucket profile, and will be on rollling basis. if you want the forecast profile on rolling basis, maintain the forecast and history horizon as periods then that will also be on rolling basis.
Regards,
Raj

Is there a Business Object for Sales Order Create and Change VA01 and VA02

Hi experts -
I am looking for a business object for Sales order create and change VA01 and VA02 respectively?
Thanks,
Mark

Hi Mark,
I think this question is best answered in [SAP Solutions|/community [original link is broken]; Forums.
- Subhodeep
Edited by: Subhodeep on Aug 29, 2009 11:14 AM

Function module which uses both BAPI's for sales order create and change

Please name the function module which uses both BAPI's for sales order create and change.
BAPI_SALESORDER_CREATEFORMDAT2
BAPI_SALESORDERCHANGE

Yup.
you must write a piece of code for this.
with if else condition.first check if SO is exsist than use second FM to change it else create new SO from first FM.
logic somethig like this.
Amit.

Can you set an alert for birthdays in Addressbook and iCal?

When I migrated from Palm Calendar to iCal, my calendar had my birthdays in it repeating each year and with a 7 day alert so I could send a card or get a present in time.
I see you can list a birthday in Addressbook and set the iCal pref to show them which is at first glance very cool and green but when I open the birthday event in iCal I don't see any way to set an alert which is a big limitation.
If I can't set alerts, then the Addressbook/iCal birthday syncing is kind of pointless and limited, unless I'm missing how to set alerts.

Hi Steven,
This is one of the reasons why I wrote Dates to iCal.
As well as automatically syncing birthday dates from Address Book, Dates to iCal can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries.
Best wishes
John M
<hr/>As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Setting up a project where source and destination are different formats

Howdy...
I'm a recent Vegas user who is just switching over to FCP6.
My question is this: When your source footage and destination format are two unrelated formats (for instance, HDV for source footage, Apple-TV H264 for destination), is it better to set up the project for your source footage format, or for your destination format?
In Vegas it didn't really matter, but it was good to use the destination format because you could preview what it'd look like at the size and frame-rate that you were going to end up in.
In FCP6, however, it seems that importing HDV into a H264 project may not work as well, becuase it wants to render the footage into the correct format before you can preview it.
FYI: The final desitnation is my gadget podcast, http://www.neo-fight.tv, which I have shot on HDV and edited on Vegas for the past year. FCP is very new to me, but I'm enjoying learning something new.
Let me know your thoughts...
Best,
Benjamin
http://www.neo-fight.tv [The TV Show for The 'Not-So-Geeky']
MacBook, MacPro Mac OS X (10.4.9)

Hi Benjamin - Prior to fcs 2 I worked in whatever my capture format was and will still continue to do that. I plan to use ProRes now - but if I was coming from an hdv source I'd prolly opt to capture using DVCPro HD and working in that.
"In FCP6, however, it seems that importing HDV into a H264 project may not work as well, becuase it wants to render the footage into the correct format before you can preview it."
As far as working in .h264 is concerned and combining other formats into that I really don't know.
h264 for me is a delivery format - so I'd opt to still work in native capture format and then transcode/convert at the end. More options ....

Setting needed for Capacity Planning.

Hi PP Gurus,
I want to know what setting we have to do for capacity planning.
what I know is:
1. W/C should be set for finite scheduling.
2. In scheduling parameters for process order tick "Generate capacity Requirement".
This both setting are made in my scenario, but it is'nt loading the work center fot that week.
Any other setting nedded?
Thanks, in advance.

Dear ,
You need to have following set up at basic level frist before you perfomr the capacity requirement planning :
1.In OPKP-Define Production Scheduling parameter -Availability check -Confirm Capacity and also Finite Scheduling chekc box ticked .
2.In OPU3/OPU5-Define Scheduling Parametesr -you should mark the following
1.Automatic Scheduling check box should be marked
2.Scheduling Log check box should be marked -generate in case there is a scheduling error due to capacity over load .
3.Scedulinga and Generate Capcity should be ticked .
3.In OPJK Imaintain check capacity with SAPSFCG013 overall profile and set indicator -1 -Release Order -by user decision if capacity is insufficient
4.Work Center - Define the capcity planner group,activate checkbox Relevant for Finite sceduling,on the capacity header define the shift timings,break timings and unit of measure,no of individual capaity, enter formula for scheduling in capacity view.
5.Routing - enter the values for the standard values. Use control key with scheduling and CRP activated .
6. OPD0 and have the following set up : Overall profile : SFAPSFC015 --Inside the over all profile I have the following set up
1.Selection Profile -SAPSFCS013 SFC: Order view, standard overview
2.Control Profile : SAP___C004 : Gen Capacity Availability Check for 1.5 months
3.Time Profile : SAP___Z006 : Gen Capacity Availability Check for 1.5 months
4.Evalution Profile : SAPSFCA013 : Gen Capacity Availability Chek =3.0D
5.Strategy Profile : SAPSFCVER1-Gen Capacity availability Check
6.Period Profile : SAP___P001 -Weekly period
7.List Profile : SAPSFCI001-Production Planing
Check all of them in place .Then you can go ahead with Capacity Req.Planning -Evalution and Leveling -CM21/CM22/CM05/CM07 etc.
Refere the below theread for farther reference :
Capacity problem in production order
capacity planning
Hope this will be useful .
Regards
JH

Table for total planned hrs and total confirmed hrs in prodution order

Hi guys,
I am creating a report for which i need total planned hrs (set up + machine + any other) and confirmed hrs.
For eg., a production order has 10 qty. Standard values are Set up time is 20 min and machine time 5 min for a base quantitiy of 1. So here the planned hrs are 20 + (5*10) = 70 min.
In which table can i find this planned hrs. I can see the standard value in AFVV table. But what logic can i use for calculating the total planned hrs.
Is there any function module for this ?
Thanks
Srini

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

Setting Alerts for emails

I'm trying to set an alert for a SharePoint list. I can set the alert for myself and other users (which worked fine) but I cannot set an alert to a helpdesk email. I think it has something do to with licensing. Does the helpdesk need an exchange
email to get alerts? - we're in the process of migrating everybody to 365 as we speak.
Thanks!

Hi,
Thanks for posting this issue,
Kindly find the below mentioned steps to solve this
1. Go to Exchange Management Console -> Recipient Configuration -> Distribution group.
2. Right-click on the problem group and choose properties.
3. On the Mail Flow Settings tab, double click on Message Delivery Restrictions.
4. Uncheck the check box “Require that all senders are authenticated”.
Also, check out the additional details in below mentioned URLs
http://joyknows.wordpress.com/2011/01/12/sharepoint-alerts-not-working-for-group-recipients/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Set alerts for resource profiles

How can I set alert in 10g OEM grid alerts for resource limits set in for a particualar user profile.
Let's say we want to get an alert when sessions_per_user reaches a value of 90 if sessions_per_user has been set to 100.
Kindly guide and provide navigation if possible.
Regards

If the existing metrics don't cover what you need you'll have to create a user defined metric. read the documentation on metrics, and shout if you still need help

Setting Alert for Project Plan deviation and changes

Similar Messages

Maybe you are looking for