Table for total planned hrs and total confirmed hrs in prodution order

Hi guys,
I am creating a report for which i need total planned hrs (set up + machine + any other) and confirmed hrs.
For eg., a production order has 10 qty. Standard values are Set up time is 20 min and machine time 5 min for a base quantitiy of 1. So here the planned hrs are 20 + (5*10) = 70 min.
In which table can i find this planned hrs. I can see the standard value in AFVV table. But what logic can i use for calculating the total planned hrs.
Is there any function module for this ?
Thanks
Srini

Hi Srini,
The following details are available in the table AFVV,
Standard value, operation qty & Base qty.
With this values create a formula Standard value * operation qty/ Base qty , this will equal to the planned hours for that particular activity type. Similarlt planned hours for other activities can be calculated.
The actual/confirmed hours are available in the table AFRU.
Regards,
Senthilkumar

Similar Messages

Table for total actual cost and total actual revenue.

Hi Gurus,
Can anybody pls tell me what is the table for total acutal cost and total actual revenue for a service order.
Thanks in advance.
Regards
Satish

Check COSP

Budget Item Details - 'Total (Loca)l' and 'Total (System)'

Dear Experts,
In Budget Scenario-> Budget Item Details, it has two rows one is 'Total (Loca)l' and 'Total (System)', what is this two rows use for? what is the diffrent between these two rows?
Your reply is highly appreciated.
Thanks.
Regards,
Danny

Hi,
All transactions in SAP Business One are done in Local Currency (LC), regardless of what currency is specified in any document. All financial reporting is based on LC.
SAP Business One offers reporting in another currency, the system currency (SC). This currency is for balance sheet reporting only. It is not relevant for any transaction involving profit and loss accounts
Hope this is helpful !

Table for inspection plan

hi all ,
what are the tables related to inspection plan in QM Module
regards

Following r the important table for inpection plan
1) PLKO    Inspection plan header
2) PLPO    Operation details
3) PLMK    Inspection plan characteristics
4) PLMW   Dependent characteristics specification
5) TQ72     Type of share calculation
6) TQ75      Qm formula parameters
7)TQ03      Control for screen texts
Amol

Any good table for Capacity Planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

Dear
Please find below SAP tables for CRP :
CRHD         Workcenter Header Data
CRCA         Workcenter Capacity Allocation
CRCO         Workcenter Cost Center Assignment
CRHH          Hierarchy Header
CRHS           Hierarchy Structure
CRTX          Workcenter Text
KAKO         Capacity Header
KAZY          Intervals of Capacity
Regards
JH

Tables for capacity planning?

HI all,
Is there any table for capacity planning?
we want to do some development to get capacity requirements data for each work center, don't like using CM01.
Thanks!
Harvey

>
harvey wu wrote:
> HI all,
>
> Is there any table for capacity planning?
> we want to do some development to get capacity requirements data for each work center, don't like using CM01.
> Thanks!
>
> Harvey
Hi Harvey,
Kindly check if the Below tables satisfy ur requriement
KBED      Capacity Requirements Records
KBEZ      Add. data for table KBED (for indiv. capacities/sp
KBKO      Header Record for Capacity Requirements
Reg
Dsk

Tables for linking sales organization and customers

Dear Sir,
I am Nikhil. I want to know the tables for linking sales organization and customer.
Please do help me.
Regards,
Nikhil

you mean table KNVV?
please post more details
A.

Difference between Total credit exposure and Total commitment

Hi All,
What is the meaning and difference between Total credit exposure and Total commitment? Probably i am confused between these two, can someone plz explain me in detial if possible with example.
Regards,
Satya

Commitments will include all sales orders, billing, delivery, and open items
Exposure, normally looks at just open items.

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

Table for maintenance plan and maintenance cycle and Unit

Hello,
I need to know the table where the values are stored for maintenance plan, maintenance cycle and Unit.
I know that we can get the maintenance cycle and unit from MMPT table.
Question 1
If the maintenance plan has only a single cycle then the data is stored in above table MMPT, but if a maintenance plan has mutiple cycles like 1 maintenance plan has maintenance cycle as 364 Days and 1092 days then the data is not stored in MMPt table.
Question 2
Requirement is I need to develop a report where in I need maintenance order, maintenance plan and the relevant maintenance cycle and unit. Supose an maintenance order is created for the above maintenance plan which has 2 maintenance cycle how can I identify for which maintenance cycle the order is created.
Regards,
Narendra

Hi,
Please review PM tables
PM/SM/SD Tables
MPOS                       Maintenance Items
AFAB     Network - Relationships
PLKO     Task list
PLAS
AFFH     Operations
PRT assignment data for the work order
AFFL     Work order sequence
AFFT     Order process instructions
AFFV     Order process instruction values
AFFW     Goods movements with errors from confirmations
AFIH     Maintenance order header
AFKO     Order header data PP orders
AFPO     Order item
AFRC     Table of planned changes to conf.: Automatic goods receipt
AFRD     Default values for collective confirmation
AFRH     Header information for confirmation pool
AFRU     Order completion confirmations
AFRV     Pool of confirmations
AFVC     Operation within an order
AFVU     DB structure of the user fields of the operation
AFVV     DB structure of the quantities/dates/values in the operation
MPOS     Maintenance ITEM
AFWI     Subsequently posted goods movements for confirmations
AUFK     Order master data
AUFM     Goods movement for order
MPLA     Maintenance Plans
BGMK     Master warranty header
BGMP     Master warranty item
BGMS     Text item master warranty
BGMT     Master warranty text
BGMZ     Warranty counter information
CRHD     Work Center Header
CRTX     Text for the Work Center or Production Resource/Tool
EQKT     Equipment short texts
EQST     Equipment link to BOM
EQUI     Equipment master data
EQUZ     Equipment time segment
HIKO     Order master data history
IFLO     Functional Location (View)
IFLOT     Functional location (TABLE)
IFLOTX     Functional location: Short texts
IHGNS     Plant maintenance permit segment
IHPA     Plant Maintenance: Partners
IHSG     Object-related permits in Plant Maintenance
ILOA     PM object location and account assignment
IMPTT     Measuring point (table)
IMRG     Measurement document
KAKO     Capacity Header Segment
KONP     Conditions (Item)
KONV     Conditions (Procedure Data)
OBJK     Plant Maintenance Object List
QMEL     Quality notification
QMFE     Quality notification - items
QMIH     Quality message - maintenance data excerpt
QMMA     Quality notification - activities
QMSM     Notification - Tasks
QMUR     Quality notification - causes
STPOA     Name is does not have an A at the end; BOM items
T001     Company Codes
T001L     Storage Locations
T001W     Plants
T077D     Customer account groups
T003O     Order Types
T352R     Maintenance revisions
T353I_T     Maintenance activity type description
T356     Priorities
T357G     Permits
T357G_T     Table 357G texts
T370A     Activity category for PM lists
TINCT     Customers: Incoterms: Texts
TVKO     Organizational Unit: Sales Organizations
TVKOS     Organizational Unit: Divisions per Sales Organization
TVKOV     Org. Unit: Distribution Channels per Sales Organization
TVTA     Organizational Unit: Sales Area(s)
VIAUFKST     Order selection view
MMPT Cycle detail
Regards
Carlos

Table for viewing SHC details and Confirmation details

Hi All,
I would like to ask in which table can i get SHC details in SRM (SHC Num, Company Code, Business Area, Created By)
I would also like to get same details for Confirmations in SRM.
Thanks!

Hi,
Go to T.code: BBP_PD
Enter the object type : BUS 2121 for shopping cart
and execute and click on the shopping cart no
You can see all the tables for the shopping cart no.
For Confirmation check :BBP_PDCON this is also appearing in the above t.code
Please check and reply
Regards
Ganesh Kumar .G

Need a table to check Planned delivery time & Total replenishment lead time

Hi Experts,
I want a report of Planned delivery time & Total replenishment lead time (MM02) for the material.
Thanks in Advance.

Hi,
Planned delv time = MARC-PLIFZ
Total Repl. lead time = MARC-WZEIT
Vishal

Hi, I want to know that standard tables for vendor analasys report and sale

Hi, I want to know that standard reports for vendor analasys report and sale order and customer order report...? why most probably we use tables and fetch the fields rather than standard reports >

Hi
This is the sample report for vendor aging:
Std reports Tcodes are:
customer : s_alr_87012178
vendor : s_alr_87012084
Custom designed:
REPORT zfi_customer_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: kna1, " Customer Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Customer Open Items Data
DATA: BEGIN OF int_bsid OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
shkzg LIKE bsid-shkzg, " Dr/Cr Indicator
belnr LIKE bsid-belnr, " Document Number
xblnr LIKE bsid-xblnr, " Ref Doc No
blart LIKE bsid-blart, " Document Type
zfbdt LIKE bsid-zfbdt, " Base Line Date
zbd1t LIKE bsid-zbd1t, " Due date1
zbd2t LIKE bsid-zbd2t, " Due Date2
zbd3t LIKE bsid-zbd3t, " Due Date3
waers LIKE bsid-waers, " Currency
dmbtr LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_bsid.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
kunnr LIKE bsid-kunnr, " Customer Number
name1 LIKE kna1-name1, " Customer Name
total1 LIKE bsid-dmbtr, " Amount in Local Curr
total2 LIKE bsid-dmbtr, " Amount in Local Curr
total3 LIKE bsid-dmbtr, " Amount in Local Curr
total4 LIKE bsid-dmbtr, " Amount in Local Curr
total5 LIKE bsid-dmbtr, " Amount in Local Curr
total6 LIKE bsid-dmbtr, " Amount in Local Curr
total LIKE bsid-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsid-dmbtr, " Amount Totals
v_gtotal2 LIKE bsid-dmbtr, " Amount Totals
v_gtotal3 LIKE bsid-dmbtr, " Amount Totals
v_gtotal4 LIKE bsid-dmbtr, " Amount Totals
v_gtotal5 LIKE bsid-dmbtr, " Amount Totals
v_gtotal6 LIKE bsid-dmbtr, " Amount Totals
v_gtotal LIKE bsid-dmbtr, " Amount Totals
v_subtotal1 LIKE bsid-dmbtr, " Amount Totals
v_subtotal2 LIKE bsid-dmbtr, " Amount Totals
v_subtotal3 LIKE bsid-dmbtr, " Amount Totals
v_subtotal4 LIKE bsid-dmbtr, " Amount Totals
v_subtotal5 LIKE bsid-dmbtr, " Amount Totals
v_subtotal6 LIKE bsid-dmbtr, " Amount Totals
v_subtotal LIKE bsid-dmbtr, " Amount Totals
v_date LIKE bsid-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsid-zfbdt, " Date Range 1
r_date2 FOR bsid-zfbdt, " Date Range 2
r_date3 FOR bsid-zfbdt, " Date Range 3
r_date4 FOR bsid-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_kunnr FOR kna1-kunnr. "Customer account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Customer Code
CLEAR kna1-kunnr.
SELECT kunnr UP TO 1 ROWS
INTO kna1-kunnr
FROM kna1
WHERE kunnr IN s_kunnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Customer Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Customer Open Items data from bsid
SELECT l~kunnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsid
FROM knb1 AS l INNER JOIN kna1 AS l1
ON lkunnr = l1kunnr
INNER JOIN bsid AS b
ON lkunnr = bkunnr AND
lbukrs = bbukrs
WHERE l~kunnr IN s_kunnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsid WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsid BY kunnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Customer Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Customer#'(015) CENTERED,
13 sy-vline ,14(35) 'Customer Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsid.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsid-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsid-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsid-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsid-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsid-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsid-dmbtr.
ENDIF.
AT END OF kunnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-kunnr = int_bsid-kunnr.
int_final-name1 = int_bsid-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-kunnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsid-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsid-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsid-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsid-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsid-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsid-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsid-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsid-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsid-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsid-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsid-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsid-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsid-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsid-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsid BY belnr zfbdt.
LOOP AT int_bsid WHERE kunnr EQ int_final-kunnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsid-zbd3t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd3t.
ELSE.
IF int_bsid-zbd2t <> ' '.
v_date = int_bsid-zfbdt + int_bsid-zbd2t.
ELSE.
v_date = int_bsid-zfbdt + int_bsid-zbd1t.
ENDIF.
ENDIF.
IF int_bsid-zbd1t = ' '.
v_date = int_bsid-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsid-belnr,
12 sy-vline,13 int_bsid-kunnr,
23 sy-vline,24 int_bsid-name1,
59 sy-vline,60 int_bsid-xblnr,
76 sy-vline,77 int_bsid-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsid-dmbtr CURRENCY int_bsid-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsid-dmbtr.
WRITE : 88 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsid-dmbtr.
WRITE : 105 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsid-dmbtr.
WRITE : 122 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsid-dmbtr.
WRITE : 139 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsid-dmbtr.
WRITE : 156 int_bsid-dmbtr CURRENCY int_bsid-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsid-dmbtr.
WRITE : 173 int_bsid-dmbtr CURRENCY int_bsid-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsid-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsid-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsid-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsid-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsid-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsid-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsid-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsid-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Customer Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Customer#'(015) CENTERED,
23 sy-vline, 24(35) 'Customer Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
REPORT zfi_vendor_ageing
NO STANDARD PAGE HEADING
LINE-COUNT 58
line-size 168
MESSAGE-ID zh_msg.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
M O D I F I C A T I O N L O G
Date | Change Number | Initials | Description
30-Aug-2004 | DTSK900**** | Anji Reddy | Initial
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE SY-LISEL, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 1 greater'(004)
'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
MESSAGE e999 WITH 'Column 2 greater'(006)
'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
MESSAGE e999 WITH 'Column 3 greater'(008)
'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs and
b~zfbdt le p_allgst.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 centered, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_date IN r_date1.
int_final-total1 = int_final-total1 + int_bsik-dmbtr.
ELSEIF v_date IN r_date2.
int_final-total2 = int_final-total2 + int_bsik-dmbtr.
ELSEIF v_date IN r_date3.
int_final-total3 = int_final-total3 + int_bsik-dmbtr.
ELSEIF v_date IN r_date4.
int_final-total4 = int_final-total4 + int_bsik-dmbtr.
ELSEif v_date > r_date4-high.
int_final-total5 = int_final-total5 + int_bsik-dmbtr.
ELSEif v_date < p_allgst.
int_final-total6 = int_final-total6 + int_bsik-dmbtr.
ENDIF.
AT END OF lifnr.
v_flag = 1.
ENDAT.
IF v_flag = 1.
int_final-lifnr = int_bsik-lifnr.
int_final-name1 = int_bsik-name1.
int_final-total = int_final-total1 + int_final-total2 +
int_final-total3 + int_final-total4 + int_final-total5 +
int_final-total6.
APPEND int_final.
v_gtotal1 = v_gtotal1 + int_final-total1.
v_gtotal2 = v_gtotal2 + int_final-total2.
v_gtotal3 = v_gtotal3 + int_final-total3.
v_gtotal4 = v_gtotal4 + int_final-total4.
v_gtotal5 = v_gtotal5 + int_final-total5.
v_gtotal6 = v_gtotal6 + int_final-total6.
v_gtotal = v_gtotal + int_final-total.
WRITE: /1 sy-vline,
2 int_final-lifnr COLOR 4 INTENSIFIED ON,
13 sy-vline,
14 int_final-name1 COLOR 4 INTENSIFIED ON,
49 sy-vline.
DATA : v_rem.
v_rem = sy-tabix MOD 2.
IF v_rem NE 0.
FORMAT COLOR 2 INTENSIFIED.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ELSE.
WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
66 sy-vline,
67 int_final-total2 CURRENCY int_bsik-waers,
83 sy-vline,
84 int_final-total3 CURRENCY int_bsik-waers,
100 sy-vline,
101 int_final-total4 CURRENCY int_bsik-waers,
117 sy-vline,
118 int_final-total5 CURRENCY int_bsik-waers,
134 sy-vline,
135 int_final-total6 CURRENCY int_bsik-waers,
151 sy-vline,
152 int_final-total CURRENCY int_bsik-waers,
168 sy-vline.
ENDIF.
FORMAT COLOR OFF.
HIDE int_final.
CLEAR int_final.
v_flag = 0.
ENDIF.
AT LAST.
WRITE : /1(168) sy-uline.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
168 sy-vline.
HIDE : v_gtotal1,
v_gtotal2,
v_gtotal3,
v_gtotal4,
v_gtotal5,
v_gtotal6,
v_gtotal.
ENDAT.
FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
v_rem = v_cnt MOD 2.
CLEAR v_date.
IF int_bsik-zbd3t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd3t.
ELSE.
IF int_bsik-zbd2t <> ' '.
v_date = int_bsik-zfbdt + int_bsik-zbd2t.
ELSE.
v_date = int_bsik-zfbdt + int_bsik-zbd1t.
ENDIF.
ENDIF.
IF int_bsik-zbd1t = ' '.
v_date = int_bsik-zfbdt.
ENDIF.
IF v_rem NE 0.
format color 2 intensified.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline, 189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
format color off.
ELSE.
WRITE :/1 sy-vline, 2 int_bsik-belnr,
12 sy-vline,13 int_bsik-lifnr,
23 sy-vline,24 int_bsik-name1,
59 sy-vline,60 int_bsik-xblnr,
76 sy-vline,77 int_bsik-zfbdt,
87 sy-vline.
WRITE : 104 sy-vline,121 sy-vline,
138 sy-vline,155 sy-vline,
172 sy-vline,189 sy-vline,
190 int_bsik-dmbtr CURRENCY int_bsik-waers,
206 sy-vline.
IF v_date IN r_date1.
v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date2.
v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date3.
v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEIF v_date IN r_date4.
v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date > r_date4-high.
v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
ELSEif v_date < p_allgst.
v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
ENDIF.
ENDIF.
FORMAT COLOR OFF.
v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
clear: v_date1, v_str, v_str1, v_tage.
write p_allgst to v_date1.
Move p_tage4 to v_tage.
concatenate '>' v_tage text-025 into v_str1.
concatenate
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 into v_str separated by space.
CALL FUNCTION 'Z_STANDARD_HEADER'
EXPORTING
title1 = 'Saudi International Petrochemical Company'(012)
title2 = v_str.
FORMAT COLOR 1 intensified.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
format color off.
WRITE : /1(206) sy-uline.
ENDFORM. " header1
<b>The below link will give Tables & Relations.</b>
http://www.erpgenie.com/abap/tables.htm
http://goldenink.com/abap/files_in_sap.html
http://abap4.tripod.com/SAP_Tables.html
http://www.geocities.com/sapcircle/Relations.pdf
Regards,
Sree

Tables for Fiels Fixed Value and Variable Value

Hi,
Can any one tell me where the actual fixed and variable costs are stored in which table and also the planned costs. I have checked it, but it is showing RKPLN as data structure. We are doing development report where in standard Cost Center Report we need to have break up of fixed and variable cost. Please guide me where exactly these fields are stored in which table. its very urgent.

Hi,
In regard to the tables for planned data please do a search of the forum as this question has already been asked a few times. E.g. here:
CO PLANNING TABLES
In regard to fixed / variable actual costs: these are not stored in separate tables. If a posting contains fixed and variable portions, for example postings resulting from splitting (KSS2), then the fixed portion is stored in the COEP- WKFBTR (line items) and COSS-WKF* fields (summary items). Please observe SAP note 192107 on this issue.
Regards
Karl

Data for Actual/ Plan Cost and Budget

Hi All,
Can you please adviseme which content i need to activate to get the Actaul, Plan cost and the Budget Data in SAP BW.
Do i need to exploer CCA cubes or Fund managment Cubes.. Please let me know... I need to know the Tables in R/3 Side for budget data to make sure that in R/3 we have budget data..
Please let me know.
Thank you
SAP

Hi there,
For those check in here:
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/561be24e8c11d596f30000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/60/0f07d3532c864aab7ec5f113146da2/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/26/d0cccc8d98c344925915ec81d5a421/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/43/de43fcf6e2154bbbbcecbc63cdf287/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/23/d5cf85683c3348b2189199e49a35cf/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/ad/be383fd98d1201e10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/1a/8c42588afe11d496d80000e835339d/frameset.htm]
[http://help.sap.com/saphelp_bw33/helpdata/en/d3/29ae399c1a6651e10000000a114084/frameset.htm]
Hope this helps.
Diogo.

Table for total planned hrs and total confirmed hrs in prodution order

Similar Messages

Maybe you are looking for