Setting Color Values Example

When looking in the help file in Flash CS3, under "Setting
Color Values", they have an example of changing the color of a car.
When you click on the paint chip, the car changes to that color,
leaving the shadowing and everything else present on the car.
When I run through the tutorial on the screen where it shows
you how to set it up, it works but it takes the entire image and
changes it a solid color.
How do they just get that color to change on the car and
leave the other pixels the same color they were?
Thank you.
Dave

Any takers? I think that this is one of the "cool" features
of Flash and I would think a lot of people are utilizing it (I
hope)...
Thanks.

Similar Messages

How to set default value and bg color of cross tab cell?

Hi all
Which way can I set default value and background color for a crosstab cell where there are no any data?
I try to pass it in following way
if isnull(CurrentFieldValue) then
But is has no effect.

Hi,
If your field is numeric
if currentfieldvalue =0 then cryellow else crnocolor
if the field is numeric but you don't see the 0 check check if : Suppress if zero is ticked in the Number format tab.
Regards

Please, can I with help of Javascript change spot color values? for example by my color VARNISH with c:0,m:10,y:15,k:0 to make change to c:0,m:0,y:0,k:0? thank you

Please, can I with help of Javascript change specific spot color values? for example, I have color named VARNISH with values c:0,m:10,y:15,k:0 and it would help me to make change to c:0,m:0,y:0,k:0 as a part of an action. Is it possible? Thank you

Hi Kon Verter,
you can change the values of your spot swatch, but you have to check many things before.
e.g. you can do something like this:
var Vcolor = app.activeDocument.swatches.getByName("Varnish");
if (Vcolor.color.spot.colorType == ColorModel.SPOT && Vcolor.color.spot.spotKind == SpotColorKind.SPOTCMYK) {
    alert("Black value before: "+Vcolor.color.spot.color.black);
    Vcolor.color.spot.color.black= 0; // and so on
    alert("Black value after: "+Vcolor.color.spot.color.black);
This will change the black value of the cmyk spot color with name Varnish to 0
Have fun

Setting colors based on values in charts

Hello
Can anyone please provide some information on how to set colors based on certain values in the data object in Charts. I have a pie chart and we would like to show a certain color for some values (if the data object has a value of 0, for those slices in the pie chart, we want to show Red color). I tried creating a calculated field setting some HTML using an IF expression. I am not able to select the category for this calculated field as HTML under Value Format tab. Is this something that is possible in a pie chart?
We are using BAM 10.1.3.3
Thanks in advance for your help.
Raja
Edited by: Raja Ramasamy on Aug 21, 2009 10:21 AM

This feature is not available for charts at the moment. For list views, the way you were trying is the way to go, you will have to create a calculated field with HTML that shows a color image based on the value in any of the columns, and finally, select that calculated field as one of the fields of the report.

Preserving Black color values when converting color PDF to grayscale

I opened a full colored PDF document (exported from InDesign using Profile: Euroscale Coated v2) in Photoshop and tried to convert it to grayscale (image > mode > grayscale) and noticed that the black color values changed. text for example that was 100% black in the PDF document became a screen of 91% black.
is there a way to preserve color values when converting full color PDF documents to grayscale?
or in other words WHICH is the correct way to convert full color PDF documents or full color InDesign files to grayscale?
I am using Adobe CS 3, Acrobat 8 Professional, on Mac OS 10.5.5

Before you open the PDF in Photoshop, set PS's Color Settings to Photoshop 5 Default Spaces. When you open the PDF set the Mode to Grayscale in the Import dialog. Just remember to reset your color settings when you're done.
Edit: Also, if you want to match black percentages as well as 100% black, set the Photoshop Color Settings to Photoshop 5 Default Spaces with the Gray working space to Dot Gain 20%.

Can af:selectOneRadio initial selection be set to values from view object?

Using JDeveloper 11.1.1.4
Hi all. I have a selectOneRadio on a data entry page which works well. Now I want to (if possible) use the selectOneRadio on an edit page--setting the choice initially to the values that were stored in a database table's record (from the data entry page). I am able to retrieve the data selected in the data entry page, but I can't find anything referencing what I want to do on the edit page. Note that my selectOneRadio objects are actually on jsff's in a region on a page. I've supplied how I designed selectOneRadio on the data entry page in hopes that someone can gleen from it and tell me how to set one up on the edit page and set its initial value to the value combination stored.
There are two columns in the data displayed (example):
Short Format / Text
Short Format / Comma Delimited
Long Format / Text
        <af:selectOneRadio value="#{bindings.Pay_File_Data_FmtVO1.inputValue}"
                           shortDesc="#{bindings.Pay_File_Data_FmtVO1.hints.tooltip}" id="sor1"
                           inlineStyle="text-align:left; font-size:2.0em;"
                           autoSubmit="true" showRequired="false" label="File Format">
          <f:selectItems value="#{bindings.Pay_File_Data_FmtVO1.items}" id="si111"/>
        </af:selectOneRadio>
public class FileTypesBean {
    String fileFormat = null;
    String dataFormat = null;
    public BindingContainer getBindings() {
        return BindingContext.getCurrent().getCurrentBindingsEntry();
    public void getFileTypesSelection(ActionEvent actionEvent) {
        fileFormat =
                (String)resolveExpression("#{bindings.Pay_File_Data_FmtVO1.attributeValue}");
        dataFormat =
                (String)resolveExpression("#{bindings.Pay_File_Data_FmtVO1.attributeValues[1]}");
        //System.out.println("dataFormat = " + dataFormat);
        // now put in ParamsBean for use
        AdfFacesContext afci = AdfFacesContext.getCurrentInstance();
        ParamsBean params =(ParamsBean)afci.getPageFlowScope().get("paramsBean") ;
        params.setFileTypeParam(fileFormat);
        params.setFileDataTypeParam(dataFormat);
    public Object resolveExpression(String el) {
        FacesContext facesContext = FacesContext.getCurrentInstance();
        ELContext elContext = facesContext.getELContext();
        ExpressionFactory expressionFactory =
            facesContext.getApplication().getExpressionFactory();
        ValueExpression valueExp =
            expressionFactory.createValueExpression(elContext, el,
                                                    Object.class);
        return valueExp.getValue(elContext);
}Thanks in advance,
Troy
Edited by: Hoopestr on Apr 18, 2012 10:54 AM

in the amimpl have an edit method, get the value you want to set and set that value for your af:selectOneRadio, row.setAttribute(PayFileDataFmtVO1, value);

To set a value in matrix cell which is linked

In sales order if I enter form no of TAX TAB as "form c" , each cell of the TAX Code column of the matrix of contents tab should be set the value as "CST". I have tried to set the value, but it is showing "Form item not editable". I have tried to make the cell as editable but still the error message is coming and it is not setting the defined value. How can this be solved?
Thankx in advance

Hi Priya Manoj
Some notes you can find on this [Thread: Set Value in Itemcode in Purchase Order Form|Set Value in Itemcode in Purchase Order Form;.
There are I has posted some examples in vbcode.
Hope the notes can help you.
Regards
Sierdna S.
Edited by: Sierdna S on Oct 22, 2008 9:45 AM

How do I set the value of a dynamic row text field

I have a repeated row form which contains a button and multiple text fields. There is a text field (Input Data Field) further up with some information I want to place in the table and multiple buttons that I want to read the value of and set to the table. I apologize there are multiple questions I have and I am using pseudocode to describe it.
Top form looks like
InputField
| ButtonX1 | ButtonY1 | DescriptionX1 (read only Text Field)
| ButtonXn | ButtonY1 | DescriptionXn
OutputRow looks like
| ButtonOutput | OutputField1 | OutputField2 | OutputField3 |
So I would like it to do
ButtonX1.click
OutputTable.OutputRow.addInstance(true) //this works - everything else I have questions on
OutputTable.OutputRow.OutputField1.rawValue = DescriptionX1.rawValue
Question 1
How do I address the location in each table to set a value
Question 2
How do I get the value of the description field in the same table and row as the button
I would like to say something to the effect of OutputTable.OutputRow[??].OutputField1.rawValue = this.parent.DescriptionX
OutputTable.OutputRow.OutputField2 = InputField.rawValue
Same question as above - how do I specify a dynamic row - is this the proper syntax for getting the value from the input field?
OutputTable.OutputRow.OutputField3 = this.ButtonLabel
Question 3
How can I get the value of the button's label to set in the field
There should be very many of these buttons and buttons will be added - I would prefer to set the value based on the button's label to make the value easier - not requiring changing the code
Question 4 - unrelated to those above.
Is it possible to build the first table
| ButtonX | ButtonY | Description |
from an XML File. I have seen examples of how to build if it is just data, but can the XML be pushed into a form with code to do the above actions?

Each object in a form must have a unique name. I doing so it is not neccessarily the name but the path or SomExpression associated with that object that must be unique. In your case you have a Table.Row.object configuration. The Row is the part that is repeating so to give each object a unique name an instance number is placed on the repeating part. So objects in the 1st row woudl be Table.Row[0].object...objects in the second row woudl be Table.Row[1].object etc .....You can see this by adding a debug instruction on the Enter event of the description field. Put the code app.alert(this.somExpression) and when you enter the field you will see what the somExpression is. Do this for a few rows and you will see the pattern (don't forget to remove the debug code from the enter event). Now you know what you have to use to address the fields. If no instance is given it is assumed to be 0 ..that is why only the 1st row is being affected.
So now to answer your questions:
Question1: The square bracket notation is an issue for javascript (this is the notation for an array) so we have to use a different means of addressing the field to include the instance number. So to address the Description in the 3rd row we woudl use:
xfa.resolveNode("Table.Row[2].Description").rawValue = "This is my new description";
Note that the instance number is 2 for the 3rd row because the instance numbers are 0 based.
Question2. The resolveNode notation allows you to pass a string so you can also concatinate expressions to make the string. If you are writing code on a button in the same row you can get the instance that you are on by using the expression this.parent.index. The "this" portion refers to the current object (the button) and the parent.index gets you th eindex of the Buttons parent. If the button is embedded deeper in a hierarchy then you can continue to add parent indicators until you get back to the node that you want. So rewriting your expression from Q1 it woudl be:
xfa.resolveNode("Table.Row[" + this.parent.index + "].Description").rawValue = "This is my new description";
Question3: The buttons caption can be retrieved by using ButtonName.caption.value.text.value
Question4: When you say build from an XML file. What are you expecting to come from the XML file? The caption that goes on the button? Typically the XML file carries data (not to say that it cannot carry other things). Just need a bit of clarification on this one first.
Hope that helps
Paul

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

How to set a value to a Presentation Variable using GO URL?

Hi All,
     I am working on a drill (GO URL) from Dashboard page1 to Dashboard page2.
     The problem I am facing is, I am not able to pass a value to the presentation variable through GO URL. (I have to pass "Customer Category" static
value to The presentation variable present in Dashboard Page2 ).
     The Dashboard page2 is having a view select in which we are using presentation variable to select the report based on the value selected in
View Select.
     For example: If the user selects "Customer Category" value in View select and clicks on GO button Customer Category report will show the out put.
     When i am drilling from Dashboard Page1 I have to pass a value to the presentation variable used in view select and also pass some filter condition in
     GO URL.
     Please let me know if it is feasible to pass a value to the presentation variable through GO URL in OBIEE 10.1.3.4.
     It will be greate if you can provide me with the syntax to set a value to the presentation variable of dashboard page2 through GO URL.
Thanks and Regards,
Sagar Vishwanathwar.

1) You have to navigate to dashboard page, not to answer request = you have to use "Dashboard URL API" not GO URL API.
2) On the target page, you have to place dashboard prompt, which sets required presentation variable.
3) Refer to the target using Dashboard URL API and set filter on prompt column using URL parameters. Example: http://localhost:9704/analytics/saw.dll?Dashboard&PortalPath=%2Fusers%2Fadministrator%2F_portal&Page=page%201&Action=Navigate&P0=1&P1=eq&P2=D_TIME.YEAR_CODE&P3=%221996%22
Do not forget to use Action=Navigate. The syntax for setting filters using url parameter is the same as for GO URL API described in Business Intelligence Presentation Services Administration Guide.
This is the way, you can implement navigation to parametrized direct SQL reports including passing filter values...
Regards K.

HOW to set the value attribute of FORM INPUT data to a variable in a JSP

eg. Registration.jsp
The data is accessed from an hidden field called course
for example, if I have "Java programming" in the field course, and I use
an expression to access the value from the hidden field.
**My problem is that the data gets truncated to "Java" , I need "Java Programming"to display. The code looks like this
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<INPUT TYPE="text" SIZE=12 NAME="course"
VALUE=<%=getParameter("course") %>
IS there ANY OTHER WAY to set the value of VALUE to a variable?

Instead of value=<%=request.getParameter("course")%>
Use double codes
value="<%=request.getParameter("course")%>"

Setting default value read from user session, for an LOV in Query component

I want to set the default value of a field in VO that participates in a named view criteria and thereby in Query component. That field is configured with an LOV by mean of a view accessor. The values are Y and N and the corresponding display strings obtained from view accessor are true and false respectively.
I am able to set the default value by setting the value of the criteria item corresponding to that field in view criteria. I am setting the value as either Y or N and I am able to corresponding display string as per the view accessor, on the query component when it is rendered.
I want to read the defauilt value from the ADF BC user session and set it as default value. I tried setting the values as "adf.userSession.userData.usageFlag". Iam ensuring that the attribute usageFlag is set before the view activity that has the query component is invoked. But this is ending up showing no default value in the Query component when rendered.
Can any one let me know how to go about with this?

I made up your table since you didn't provide some example, but I'm sure this will give you the picture:
SQL> var run_type varchar2(1)
SQL> exec :run_type := 'A'
PL/SQL procedure successfully completed.
SQL> create table my_cycles as select level cycle_id
2                            ,      level cycle_status
3                            from   dual connect by level <= 5;
Table created.
SQL> select cycle_id
2 from   my_cycles
3 where case
4           when :run_type = 'D' and cycle_status = 1 then 1
5           when :run_type != 'D' and cycle_status in ( 2, 3 ) then 1
6         end = 1;
CYCLE_ID
         2
         3
2 rows selected.
SQL> exec :run_type := 'D';
PL/SQL procedure successfully completed.
SQL> /
CYCLE_ID
         1
1 row selected.
SQL>

Setting the value of a textbox from another page

Hi Everyone,
I have a multi paged application (multiple xib, multiple controllers)
In my selection view, the view that holds the UIViewPicker control, I need to populate the page that called the selector page...
I have the code to identify what page called the selector, and when the page is dismissed, I need to fill in the field from the calling page.
I have included the header of the calling view in my selector view, and now I need to be able to fill in a readonly textbox in the calling view....
Do I need to setup a property for each of the textboxes in the calling view, or can I populate them directly??
thanks
tony

alt-088 wrote:
I am sorry, but I am lost in this implementation....
How exactly do I tell the self.parentViewController what control will receive the new text value??
Ooooops!! I'm the one who needs to be sorry, Tony:
// from previous post
- (void)setTextInParent:(NSString* textValue) {
// assume that every possible parent controller has a "textbox" object
// which is a member of some class that has a writable 'text' property
[previousViewController setValue:textValue forKey:@"text"]; // <-- * Idiot alert *
Looks like another one of my senior moments. As you pointed out, we need the value of the 'textBox' property before we can set the value of the 'text' property.
To your question on how I am displaying the second view, it is called via
[self presentModelViewController:screen animated:YES]
from a button click event
Cool. That means we already have the address of vc1 in the 'parentViewController' ivar of vc2, so we don't need to add the 'previousViewController' ivar shown in my example.
So here's a corrected and maybe more relevant example--this one has been tested (Duh!), btw:
- (IBAction)done {
// get the currently selected string
NSInteger row = [pickerView selectedRowInComponent:0];
NSString *selection = [dataArray objectAtIndex:row];
NSLog(@"%s: selection=%@", _func_, selection);
// set text in textBox property of parent controller
[self.parentViewController setValue:selection forKeyPath:@"textBox.text"];
[self dismissModalViewControllerAnimated:YES];
I have tried to implement this code
[self.parentViewController setValue:21 forKey:@"test"];
but it is generating an error stating
passing argument 1 of 'setValue:forKey:' makes pointer from integer without a cast
Yeah, referring to the doc, [setValue:forKey:|http://developer.apple.com/iphone/library/documentation/Cocoa /Reference/Foundation/Protocols/NSKeyValueCodingProtocol/Reference/Reference.html#//appleref/occ/instm/NSObject/setValue:forKey:] wants an id type (pointer to an object of any Obj-C class) for the first arg. Since 21 is an int, i.e. a scalar value, the compiler doesn't like it (and the runtime system would like it even less).
However when you want to use KVC to set a scalar property, the methods are actually smart enough to extract an int if you provide a NSNumber object (see "Setting Attribute Values Using Key-Value Coding" under [Key-Value Coding Fundamentals|http://developer.apple.com/iphone/library/documentation/Cocoa/Conc eptual/KeyValueCoding/Concepts/BasicPrinciples.html#//apple_ref/doc/uid/20002170 ] in the Key-Value Coding Programming Guide). So if 'test' is an int ivar of the parent controller, something like this should work:
[self.parentViewController setValue:[NSNumber numberWithInt:21] forKey:@"test"];
Does that cover your questions? Sorry again for the bad code. Most of the examples I post are pasted directly from working, tested code, and I usually add a disclaimer if it's just something I keyed into the forum. But when I"m having a senior moment all bets are off.
- Ray

Placing images in Illustrator changes their color values-Why?

I've been placing photoshop tiff files into Illustrator, and doing this seems to change the color values, when I sample them with the eyedropper tool. The images I made use a custom mix of CMYK rich black, with the K set to 100. In Illustrator, they appear to revert to the default 'Photoshop black", approx C75 M68 Y67 K90. This is not my intent of C70 M60 Y58 K100. The Illustrator document is CMYK mode, and I don't know why this is happening. The non-image items (vectors) in my illustrator file DO retain the color values I intended, however.
Is this some kind of setting I can change in Illustrator? Will this discrepancy show up when this file goes to print? Please help! Thanks.

WHen the image is not embedded, Illustrator samples the representation values. Those are handled by color management.

Setting Color Values Example

Similar Messages

Maybe you are looking for