Setting JOB

Hi,
I want to set a background job to a program. the job should run daily at 4 AM.
if i set the job from tomarrow, it should take the tomarrow date i.e, 22/11/2008, then minus it by one day
i.e, 21/11/2008. then pass this value to the selection parameter of the program.
How to i set it???
regards,
Swetha

Hi Shwetha,
To set the background job through ABAP programming instead of SM36 we can use the following procedure :
1. Call FM JOB_OPEN
2. Call FM JOB_SUBMIT / SUBMIT statement and pass the Job No. from the JOB_OPEN
3. Call FM JOB_CLOSE.
The link contains a sample program to implement it :
http://help.sap.com/saphelp_40b/helpdata/en/fa/096d40543b11d1898e0000e8322d00/content.htm
Thanks,
Nitesh Jain

Similar Messages

I would like to set job trigger on Data Service job.

Hi Expert,
I would like to know that how to set job trigger on Data Service job because now our system has been set job separate for get data from FI Module , HR Module and other. I want to execute job follow below.
Start --> FI job run --> FI job finished --> trigger --> HR job run --> HR job finished --> trigger --> Other etc.
Or if you have any idea. Please advise me.
Thank you for your advise.

Hi,
You can do this from Data Service management console, follow the below steps to create and execute
batch (.BAT) file
Select Batch > repository.
Click the Batch Job Configuration tab.
For the batch job to configure, click the Export Execution Command link.
4. On the Export Execution Command page, enter the desired options for the batch job command file that you want the Administrator to create(Extension will be added automatically: .sh for UNIX , .bat for Windows)
5. Click Export.
Batch file for the job will be created under <DS_COMMON_DIR>\log directory.
6. Create a New DS Jobs in Data service designer and write the script to execute your batch file as below
Hope this will be helpful for your requirement .
Regards
M Ramesh

Setting Job Priority outside of Scheduler Windows

We have a scheduled email job, EMAIL_RELAY, that should run every 15 minutes. We also have 8000
separate batch jobs that run in a Window, SAVED_SEARCHES_WINDOW, between
02:00 and 07:00. During the Window, the email job fails to run. When I look at the first email job that runs after the window closes I see that the job was requested to start at 02:00 but the actual start time was 07:00. The database is very busy during the saved searches window, but I would like the scheduler to run the email job every 15 minutes regardless. I have read in the docs that the you can prioritize jobs, but to me it looks like this is only within a window. I cannot see how I can add the EMAIL_RELAY job to the SAVED_SEARCHES_WINDOW as still get it to repeat every 15 minutes so changing the priority seems useless.
Any ideas?
Thanks

Hi,
- it is possible to prioritize jobs that are waiting to be run by setting the JOB_PRIORITY attribute of the job . You may run into an issue with so many (>1000) jobs in the waiting queue. If so you may need to put the higher priority e--mail jobs in a different class which points to a different service
- it may be that you have set the job slave limit too low. Please check the value of job_queue_processes
select value from v$parameter where name='job_queue_processes';
and of max_job_slave_processes (from the all_scheduler_global_attribute view) to make sure both are high enough.
- if both limits are high enough (or as high as you want to set them) but you want to make sure that your e-mail job always runs you can use the techniques on this thread
Run Jobs One After Another
to setup two classes, one for high-priority jobs and one for all other jobs and reserve a given number of slave processes for each class. You can have a resource plan in effect outside a window (as well as in a window) and the resource plan is what allocates resources between job classes (via resource consumer groups).
Hope this helps,
Ravi.

Oracle scheduler : Setting job attributes using Enterprise Manager

Hi,
I have created below job and set the attribute "'raise_events" using the dbms_scheduler.set_attribute procedure.
begin
dbms_scheduler.create_job
( 'ebj_A', job_action =>
'/tmp/job_A.ksh',
job_type => 'Executable',
enabled => false ,
auto_drop =>false) ;
dbms_scheduler.set_attribute
( 'ebj_A' , 'raise_events' , dbms_scheduler.job_run_completed);
end;
Now I am creating the same job using the Enterprise Manager (GUI).
I donot see any where to set the attribute (Raise_events) using GUI.
Please can you tell me can we set that attribute using the Enterprise manager or not.
If yes please let me know how.
Thanks in advance.
Sreenath.

Hi ,
I am modified my question.
We could set the value for "raise_events" attribute using Dbms_Scheduler.Set_Attribute.
Can we also set the value for the "raise_events" attribute using the EM.(GUI).
Please let me know.
Thanks in advance.
Sreenath.

Printing setting job log - can't save settings.

Hi, this problem's been around some time with my printing settings.
I am attaching the my setting image as below.
User ID & User Code when printing Color from my computer is '100109'.
I want to permanently save this numbers.
However, every time I try it appears as '100108'; may be my previous setting.
How can I save it as '100109'?
Thanks in advance for the help.

Your image shows that you are using the Presets menu. If the Preset of Color has been saved with a particular User ID/User Code (ex 100108), then delete this Preset and create a new Color preset using the number you want (100109).
To do this, with the Color preset selected, click on the Presets drop menu and select Delete. Then, change to the Job Log menu, enter your 100109 User ID and Code, and then click on the Presets drop menu again and select Save As. Give it the name of Color and click OK.
Now when you print and select the Color Preset, the Job Log menu should show the 100109 User ID & Code.

How to set a job ran after another job finished?

Dear Experts,
Our requirement is to have 2 JOBs defined in SAP:
JobA and JobB
The requirement is JobA will firstly ran and finished everyday.
Then JobB will start to run upon JobA finished everyday also.
Then what i did is set 2 jobs, and set JobB ran after with JobA. I set JobA's name in 'After Job' for JobB.
Right now, the issue is:
JobB will run after JobA, but only could run one day..
The next day after JobA finished, JobB will not run...
Please kindly help what issue here??
Thank you very much.

Dear Hoo,
It is possible to follow one job after another.
For this set up please go to transaction "SM36"
fill your details and then press "Start condition" a new screen opens where you can see several tabs,
and there is one tab with "After Job" , please enter the name of Job e.g jobA.
here you can set all the conditions to start a new job.
I hope this solves your problem.
Regards,
Paresh

Jobs setting

Hi i would like set jobs for my packages
is it good to set all 10 packages(10 steps) in job or 10 jobs for each package
Thanks & regard
ADKR

Depends on dependency
If they are all related packages you can put them as a 10 steps of same job
Even further if you want to set dependency among packages themselves you can create wrapper package which will call these individual packages as per dependency set inside it.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

GROUP BY grouping sets

Hello everybody,
I have this query
SELECT ALL
            M_PAGAMENTO||' '||D_TIPO MPAGA,
            grouping(F.KIND_F),
            DECODE (grouping(F.KIND_F), 0 , 'Totali IVA',F.KIND_F) a1,
             case
             when grouping(F.KIND_F) = 1 then F.KIND_F
             when grouping(F.KIND_F) = 0 then 'Totali IVA'
             end TIPOF,
           F.KIND_F TIPOF,
           COUNT(*) NFATTURE,
            sum(F.TOT_FT) TFATTURA, sum(F.BOLLO) TBOLLO,
            K_IVA, SUM(FA.IPBFA) TIMP, SUM(FA.IPSFA) TIPS
FROM A_FATTURE F,A_PAZIENTI A,TIPOLOGIA_PAGAMENTI p ,A_FATTURE_ALIQUOTE FA
where (F.TIPORD = A.TIPORD AND F.K_CODE = A.K_CODE AND F.ANNO = A.ANNO)
AND   (FA.TIPORD = F.TIPORD AND FA.K_CODE = F.K_CODE AND FA.ANNO = F.ANNO AND FA.N_FATT_D = F.N_FATT_D)
and p.ID_TIPO = f.M_PAGAMENTO
&MYWHERE
GROUP BY grouping sets (M_PAGAMENTO||' '||D_TIPO,F.KIND_F),K_IVA
ORDER by 1
Why I get this result(A1, tipof) = NULL but they would be = 'D' (F.KIND_F ='D'
MPAGA                    GROUPING(F.KIND_F)     A1     TIPOF     TIPOF     NFATTURE     TFATTURA     TBOLL      K_IVA     TIMP          TIPS
01 Contante               1                              5          3183,24          7,24     20     250          50
01 Contante               1                              3          2342,43          5,43     FC     5,43          0
01 Contante               1                              50          7024,61          9,91     ES     24458,91     0
02 Assegno               1                              1          780,81          1,81     FC     1,81          0
02 Assegno               1                              2          816,96          1,81     ES     755,15          0
02 Assegno               1                              1          780,81          1,81     20     50          10
04 Carta di credito          1                              1          780,81          1,81     FC     1,81          0
04 Carta di credito          1                              1          780,81          1,81     20     50          10
04 Carta di credito          1                              1          780,81          1,81     ES     719          0
                    0     Totali IVA     Totali IVA     D     53          8622,37          23,53     ES     25933,06     0
                    0     Totali IVA     Totali IVA     D     5          3904,05          9,05     FC     9,05          0
                    0     Totali IVA     Totali IVA     D     7          4744,86          10,86     20     350          70where I am wrong?
thanks for any help

Rosario,
Those rows where grouping(f.kind_f) = 1 are superaggregate rows where you are grouping by M_PAGAMENTO||' '||D_TIPO,K_IVA. So f.kind_f doesn't come into play for these rows, and it shows a null value.
You can of course hard code a 'D' value in there, but values of the f.kind_f column are always null at this grouping level.
See this example:
SQL> select deptno
2       , job
3       , extract(year from hiredate)
4       , sum(sal)
5       , grouping(job)
6    from emp
7   group by deptno
8       , grouping sets (job,extract(year from hiredate))
9 /
    DEPTNO JOB       EXTRACT(YEARFROMHIREDATE)   SUM(SAL) GROUPING(JOB)
        10 CLERK                                     1300             0
        10 MANAGER                                   2450             0
        10 PRESIDENT                                 5000             0
        20 CLERK                                     1900             0
        20 ANALYST                                   6000             0
        20 MANAGER                                   2975             0
        30 CLERK                                      950             0
        30 MANAGER                                   2850             0
        30 SALESMAN                                  5600             0
        10                                1981       7450             1
        10                                1982       1300             1
        20                                1980        800             1
        20                                1981       5975             1
        20                                1982       3000             1
        20                                1983       1100             1
        30                                1981       9400             1
16 rijen zijn geselecteerd.
SQL> select deptno
2       , job
3       , extract(year from hiredate)
4       , sum(sal)
5       , grouping(job)
6       , decode(grouping(job),1,job)
7    from emp
8   group by deptno
9       , grouping sets (job,extract(year from hiredate))
10 /
    DEPTNO JOB       EXTRACT(YEARFROMHIREDATE)   SUM(SAL) GROUPING(JOB) DECODE(GR
        10 CLERK                                     1300             0
        10 MANAGER                                   2450             0
        10 PRESIDENT                                 5000             0
        20 CLERK                                     1900             0
        20 ANALYST                                   6000             0
        20 MANAGER                                   2975             0
        30 CLERK                                      950             0
        30 MANAGER                                   2850             0
        30 SALESMAN                                  5600             0
        10                                1981       7450             1
        10                                1982       1300             1
        20                                1980        800             1
        20                                1981       5975             1
        20                                1982       3000             1
        20                                1983       1100             1
        30                                1981       9400             1
16 rijen zijn geselecteerd.Regards,
Rob.

Job scheduled at month end.

Hello,
Does anyone know how to set job schedule at each month end?
as you all know, for each month, end date is different from month to month.
but we need to execute a job at month end... is there any good method?
thanks advance for your kind reply and advice.

Hi,
It is possible using SM36 , read the solution provided by Thomas (Schedule on 31st )
Re: How to run a job on last day of every month
Regards,

Sequence periodoic Jobs

Hello All,
I have 3 jobs thats needs to run one after the other.
Job A, Job B and job C.
When Job A is complete Job B needs to trigger and then when job B is done Job C.
I have set the Jobs in SM36, First i have set Job A witha time and date and schedules to run everyday as a periodic job.
Now for Job B, I have clicked the tab after Job and i have given to atart after Job A and for JOb C after Job B.
However the problem is it all works fine the first day of the jon. ALl job ran and everthing looks good.
But from the second day onwards Job B and Job C are not running. However Job A is getting completed everyday.
Any suggestions on why this happens and what can be done to resolve this.
Thanks,
Ster

Hi,
I think if you schedule JOB B after JOB A then there is no need to make JOB B periodic as logically if JOBA is periodic then JOB B will become periodic.
For documentation you can go through this link.
[http://help.sap.com/saphelp_erp60_sp/helpdata/EN/c4/3a7f87505211d189550000e829fbbd/frameset.htm]
Regards,
Ankur Parab

Job event and chain

Hello,
i have job "MAIN_JOB" which raise event JOB_SUCCEEDED, second job "LITTLE_JOB" consume this event.
But i have one problem. MAIN_JOB starts chain "MAIN_CHAIN", and always when each step of this chain completed succesfull,
job "MAIN_JOB" raise event "JOB_SUCCEEDED".
How to do so "MAIN_JOB" raise event only once, not for each step?
DBMS_SCHEDULER.CREATE_JOB
job_name => 'MAIN_JOB'
,schedule_name => 'ANY_SCHEDULE'
,job_class => 'DEFAULT_JOB_CLASS'
,job_type => 'CHAIN'
,job_action => 'MAIN_CHAIN'
DBMS_SCHEDULER.SET_ATTRIBUTE
( name => 'MAIN_JOB'
,attribute => 'RAISE_EVENTS'
,value => DBMS_SCHEDULER.JOB_SUCCEEDED);
DBMS_SCHEDULER.CREATE_EVENT_SCHEDULE
schedule_name => 'EVENT_SCHED'
,start_date => to_date('01.01.2012 00:00:00','dd.mm.yyyy hh24:mi:ss')
,event_condition => 'tab.user_data.object_name = ''MAIN_JOB'' and tab.user_data.event_type = ''JOB_SUCCEEDED'''
,queue_spec => 'SYS.SCHEDULER$_EVENT_QUEUE, REPORT'
,end_date => NULL
DBMS_SCHEDULER.CREATE_JOB
job_name => 'LITTLE_JOB'
,schedule_name => 'EVENT_SCHED'
,program_name => 'SOME_PROGRAMM'
,auto_drop => false
,enabled => true
Thx.
Edited by: dbms_alec on 13.05.2012 23:44

This is because for each step of chain a job is run. For your request don't set job attribute to raise event but create a step for chain job that raise this event from code. Put this step as last step in chain job.

Scheduler - Event Based Jobs

Hi,
I've been trying to create an event based job dependent on multiple jobs. I tried queuing, but it seems like it can only hand one Job at a time. Also, chains were recommended to me, but I want the Job to run on the dependence on the Job that ran on specific program at the specific time. I currently know that chains can only handle, programs, other chains and/or events.
In my mind chains wouldn't work, because If I wanted to run Job3 dependent on the outcome of Job1 running Program1 and Job2 running Program2, chains wouldn't be able to accomdate that. For it to happen in chains I would have to attach Program1 and Program2 to the new chain Job and that is not exactly what I would want.
Can anyone help/clarify this situation for me. Thank you.
Tony

Hi Tony,
So the requirement is to run a job after 2 prior jobs have completed.
There are two ways I can think of to do this, both using events. In both cases you need to set job A and job B to raise events on completion (succeeded, failed or stopped) and setup an agent for the Scheduler event queue in the schema in which you are working
dbms_scheduler.add_event_queue_subscriber('myagent')
In order to get Job C to start after jobs A and B have completed there are 2 options.
1) Let job C point to a chain and start running whenever job A has completed. The chain will have 2 steps, one event step waiting on B and one that runs your task C. An event step does nothing but wait for a particular event and complete successfully when the event is received. The second step will run when the event step waiting on job B has completed.
So your chain would look something like
begin
dbms_scheduler.create_chain('chain1');
dbms_scheduler.define_chain_event_step('chain1','stepB',
'tab.user_data.object_name = ''JOB_B'' and
tab.user_data.event_type IN(''JOB_SUCCEEDED'',''JOB_FAILED'',''JOB_STOPPED''',
'sys.scheduler$_event_queue,myagent');
dbms_scheduler.define_chain_step('chain1','stepC','finalTaskProg');
dbms_scheduler.define_chain_rule('chain1','true','start stepB');
dbms_scheduler.define_chain_rule('chain1', 'stepB completed', 'start stepC');
dbms_scheduler.define_chain_rule('chain1', 'stepC completed', 'end');
dbms_scheduler.enable('chain1');
end;
And your job would point to the chain and run whenever job_A completes (similar condition and queue_spec). It would keep waiting till job_B runs and then the final task would run and it would complete.
2) The second way is to require job_A to insert a row into a table somewhere. Rule conditions can access table data so you could have job_C have an event condition which checks for a completion event for job_B and checks the table to see whether job_A has completed. Then the code you run should then remove the row in the table
e.g.
queue_spec=>'sys.scheduler$_event_queue,myagent'
event_condition=>'tab.user_data.object_name = ''JOB_B'' and
tab.user_data.event_type IN(''JOB_SUCCEEDED'',''JOB_FAILED'',''JOB_STOPPED''' and
(select count(*) from mytab where col='job_A')>0'
Then when running C do - delete from mytab where col='job_a';
Both of these assume that job_A always completes before job_B but both of these will then run job_C after job_B completes. Modifying either of these so that either job A or B runs first is also possible by having another job that waits on A rather than B.
Hope this helps, if you have any more questions, let me know.
-Ravi

BATCH Job Playing havoc !

Hi,
1. User called in to say that she cannot do a task that she used to do all the while.
2. She had that role ( Z-XX-_)
3. I went to role on PFCG it says "Last changed by "BATCH 19"
4. On checkign 'Batch 19' Its a batchjob
5. Why does it need to change the roles ? can roles be changed without user interaction ?
Thanks

Jurjen Heeck wrote:>
> Go to SM37, set job name to , user name 'your potential culprit', select all job statuses and a 24 hour timespan to see them for a day, 724 for a week, you can do the maths.
Batch users can have the nasty habit of spawning and reorganizing their own jobs, so there is no guarantee that looking in SM37 alone will show a complete picture, but it is a good starting point.
I would also look at the authorizations of the user to get an idea which area it can be used in, and with that in mind go to the security administrator and ask for the person who is responsible for the user ID, the access which it has and the possibly the management of it's password as well.
Ideally, that person should have all use cases of the user ID nicely documented.
If that is not the fact... then you will need to use more technical means to log / trace / monitor / etc the user ID over a period to re-document the use cases. Some usefull transactions are SM20 / RZ11 / ST22 / etc. Scanning for the user ID (or parts of the name, such as 'BATCH') is also an idea worth trying.
Cheers and good luck,
Julius

G6: Setting default metadata values

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Hello all!I am trying to find a way to set default metadata values in plumtree.
For example, if I created a Web Content Crawler to scan MarchofDimes.com, which has various career postings, I would like to be able to default or force these crawled content items to have a category field of "Job Postings".
It appears that at the "Content Type" object level, you can set a default value. However I don't want to set "Job Postings" as the category for all imported web content, only those imported through this particular crawler.
I tried to create a new Content Type called "Web Content - Job Postings" but I chickend out when it got down to setting a new identifier to map to the Content Type. I wasn't sure how that would be accepted in the Global Content Mime/File Type Map Utility if there were duplicate identifiers.
Apart from going into each crawled document and setting the category field manually, does anyone have a recommendation on how this can be done?Thanks!Geoff!
While I have your attention, in the Global Document Property Map, how can I identify the various Document Attributes?

Maintain transaction using DBMS JOB

Hi,
How, can I maintain a transaction in DBMS SUBMIT JOB
Suppose, I have parent and 2 children.... when 1 child raise and exception the other child's data should not be committed.

user8650395 wrote:
Currently, Java triggers the stored procedures and we do not have COMMIT in any of our procedures. Each Java node has COMMIT once the process is completed it commits the data.What Java? Your original post says child jobs are submitted via DBMS_JOB. Anyway, assuming child job is java, modify java code. First of all you need to pass run_id to java. Then, at each commit point do the following:
1. Execute autonomous transaction SP that updates run table with:
UPDATE run_table SET status = 'SUCCESS' where run_id = passed_run_id and job = 'ChildN_Job';2. Loop until all other jobs for same run id set their status:
3. Check if at least one status is FAILURE. If so, rollback. Othherwise, commit.
And at each rollback point you call autonomous transaction SP to set job run id status to FAILURE.
SY.

Setting JOB

Similar Messages

Maybe you are looking for