Setting Line Pattern for Lines

Hi All,
How to set line pattern for Lines? I am trying to use Line Pattern to draw some thing like "======" ( with out gap though I used equal symbol to draw I don't have other way to show an example). I have tried setting line pattern it is not working any one help is much appreciate.
Thanks

Hi,
Actually you can draw two lines and keep the distance as sme as you are trying to show by equal sign. Just remove tick from Snap To Grid option from View>Snap To Grid then you can adjust using the arrow keys.
-Ammad

Similar Messages

Multiple patterns for one SimpleDateFormat???

Newbie so be nice! :)
I am using the following formatter to define a SimpleDateFormat:
private static SimpleDateFormat theFormatter;
     static {
          theFormatter = new SimpleDateFormat("yyyyMMdd");
          theFormatter.setTimeZone(TimeZone.getTimeZone("UTC"));
          theFormatter.setLenient(false);
This works fine when the date submitted is in the format "yyyyMMdd" however sometimes the date is submitted in the format "yyyy-MM-dd" and when this happens I get an error saying unparsable date when I try to parse my date later on.
Is there a way I can set two patterns for a SimpleDateFormat or can anyone suggest a way of solving this problem?

flobabob wrote:
Newbie so be nice! :)
I am using the following formatter to define a SimpleDateFormat:
private static SimpleDateFormat theFormatter;
     static {
          theFormatter = new SimpleDateFormat("yyyyMMdd");
          theFormatter.setTimeZone(TimeZone.getTimeZone("UTC"));
          theFormatter.setLenient(false);
This works fine when the date submitted is in the format "yyyyMMdd" however sometimes the date is submitted in the format "yyyy-MM-dd" and when this happens I get an error saying unparsable date when I try to parse my date later on.
Is there a way I can set two patterns for a SimpleDateFormat or can anyone suggest a way of solving this problem?Create two SimpleDateFormats, one for each pattern. Check the length or for the existance of a "-" and then use the appropriate SimpleDateFormat.

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

How to sets the Reason for Rejection of the Open Sales Order Lines

Hello gurus,
          I want to set the Reason for Rejection of the Open Sales Order Lines, Case is like :
If current date is exeed the Auto Void Confirmed Back Order Days(for item level) + date (last responding from customer), then reason for rejection should be set, So i want the logic to find out the date is exceed or not.
Thanks
Anjana

Hello anjana,
   Actually your question is some confusing, but if u want to get eldest change as active sales order then logic is as follows:
1. On base of OBJNR u have to get UDATE from JCDS table
2. then write logic as:
SORT i_jcds BY objnr stat chgnr DESCENDING.
      LOOP AT i_jcds INTO wa_jcds1.
        CLEAR lv_stat.
        lv_stat = wa_jcds1-stat.
        AT NEW objnr.
          AT NEW stat.
            CLEAR: wa_tab.
            wa_tab-objnr = wa_jcds1-objnr.
            wa_tab-stat = lv_stat.
          ENDAT.
        ENDAT.
        IF wa_jcds1-inact = 'X'.
          CLEAR lv_tabix.
          IF sy-tabix > 1.
            lv_tabix = sy-tabix - 1.
          ELSE.
            lv_tabix = 1.
          ENDIF.
          READ TABLE i_jcds INTO wa_jcds2 INDEX lv_tabix.
          IF sy-subrc = 0.
            wa_tab-chgnr = wa_jcds2-chgnr.
            wa_tab-udate = wa_jcds2-udate.
            wa_tab-utime = wa_jcds2-utime.
            APPEND wa_tab TO i_tab.
          ENDIF.
          CONTINUE.
        ELSE.
          wa_tab-chgnr = wa_jcds1-chgnr.
          wa_tab-udate = wa_jcds1-udate.
          wa_tab-utime = wa_jcds1-utime.
        ENDIF.
        AT END OF objnr .
          AT END OF stat.
            APPEND wa_tab TO i_tab.
          ENDAT.
        ENDAT.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr stat.
      SORT i_tab BY objnr stat udate utime.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr.
3. now in i_tab table u'll get eldest UDATE
Hope its work for u.
Thanks & Regards,
Sumit Joshi

File adapter-How to set line break in text file-split record into two lines

Dear Guru's,
I have to solve following problem with XML (with mulitiple records) to TEXT file scenario using file adapter. I have to output for ever ONE data record in XML always two identical lines in text file. Second line should have a little bit different mapping in few fields like date,... So I did duplicate fileds in my output structure in mapping and need to know how to set line break in the middle and see half of structure in first line and next structure half in second line
My output structure in mapping is:
CASHFLOW
- INTERFACE
- GESELLSCHAFT
- ANWENDUNG
- PRODUKT
- VERTRAG
- BETRAG
- WAEHRUNG
- DIRECTION
- BEWEGUNGSTYP
- FAELLIGKEIT
- ZINSFESTSTELLUNG
- ZAHLUNGSTAG
- RENDITE
- INTERFACE2
- GESELLSCHAFT2
- ANWENDUNG2
- PRODUKT2
- VERTRAG2
- BETRAG2
- WAEHRUNG2
- DIRECTION2
- BEWEGUNGSTYP2
- FAELLIGKEIT2
- ZINSFESTSTELLUNG2
- ZAHLUNGSTAG2
- RENDITE2
Question is how can I set on receiving file adapter in Content Conversion Parameters that fields from first structure half INTERFACE...RENDITE should be outputed in one line and fields from second half of structure INTERFACE2...RENDITE2 should start on second line in final text file.
I'm getting at the moment one line only and I need to know how can set line break so that second line starting with INTERFACE2(CA)...RENDITE2 will start in new line.
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000",CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
This should be final output:
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",2,12,2009-01-28,2009-01-27,2009-01-28,"0.0000000"
CA,"0100","7","512",20090127010001,-12454762586.6800,"EUR",1,10,2009-01-27,2009-01-27,2009-01-27,"0.0000000"
My file adapter settings:
RecordsetStructure=CASHFLOW
CASHFLOW.fieldNames=INTERFACE,GESELLSCHAFT,ANWENDUNG,PRODUKT,VERTRAG,BETRAG,WAEHRUNG,DIRECTION,BEWEGUNGSTYP,FAELLIGKEIT,ZINSFESTSTELLUNG,ZAHLUNGSTAG,RENDITE
CASHFLOW.fieldSeparator=,
CASHFLOW.endSeparator='nl'
CASHFLOW.fieldNames=INTERFACE2,GESELLSCHAFT2,ANWENDUNG2,PRODUKT2,VERTRAG2,BETRAG2,WAEHRUNG2,DIRECTION2,BEWEGUNGSTYP2,FAELLIGKEIT2,ZINSFESTSTELLUNG2,ZAHLUNGSTAG2,RENDITE2
CASHFLOW.fieldSeparator=,
It wont help if I add two identical structures in mapping because in output i would see for multiple entries section with first lines only and after that section with second lines only. And CASHFLOW is one part of more complex mapping ...
(This is final output structure RecordsetStructure=HEADER,CASHFLOW,CONDITION,REFERENCE,CONTRACT - more sections with different data and all these should have duplicate lines at the end)
Thanks a lot for any help
Cheers
Marian
Edited by: Marian Luscon on Jul 14, 2009 11:44 AM

Hi Ivan,
right, I did test just for sure.
Putting constant 'nl' into field CASHFLOW-INTERFACE1 didnt help - still getting one line instead two lines.
CA ,"0100" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,2 ,12 ,2009-01-28 ,2009-01-27 ,2009-01-28 ,"0.0000000" ,'nl' ,"GTP1" ,"7" ,"512" ,20090127GTP101 ,-12454762586.6800 ,"EUR" ,1 ,10 ,2009-01-27 ,2009-01-27 ,2009-01-27 ,"0.0000000"
So there is still question. Is there any way (mapping,...) how to output always 2 lines in text file for one record in XML. It always does 1 record in mapping structure = 1 line but we need 2 lines ...
Example:
Input: 4 records in XML
Output: 8 lines in final text file ...
Thanks to you all guys
Marian

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

CR XI - Problem Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) of an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corrsponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.
Thanks,Steve

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

How to set line width using CoreGraphics ?

Hi guys.
I trying draw line with 2 pixels width.
How to set line width on CoreGraphics ?
AFAIK, OpenGLES.framework has method like this :
glLineWidth(2.0);
Is it possible for CoreGraphics ?
Thanks in advance.

See CGContextSetLineWidth in the CGContextReference.
You might also want to look over Painting a Path in the +Quartz 2D Programming Guide+.
\- Ray

How can I set line wrap on a JButton??

Hi...
I am working on an application that required to have a long label on a button and I was wondering if anyone know how to set line wrap on a JButton. Any suggestion will be greatly appreciate.

If it is not inconvenient for you to use mouse events instead of action events this procedure may be adequate.
Invoke "createImage" on the JButton to obtain an "Image" object then use "getGraphics" on the image object to get "Graphics" object. Next call "getFontMetrics" on the "Graphics" object to obtain "FontMetrics". Now you can get the size of a String drawn from the "drawString" method of the "Graphics" object. This can be obtained in an int returned from "getHeight" method in "FontMetrics".
You can obtain the center of the "Image" by using "getSize" method from JButton and dividing it by 2.
You can get the width of characters by using "FontMetrics" "charsWidth" method. Now you can use the int returned from charsWidth and getHeight to align text in the JButton "Image" by using the "Dimension"
object returned by the "getSize" method. Now invoke
the "drawString" method for as many lines of text as you would like to display. After finished drawing strings you
construct an ImageIcon with its one parameter being the "Image" object you have created and drawn on.
Now you invoke the "setIcon" method of JButton to insert the ImageIcon as the image displayed on the JButton.
At this point you have a JButton with all the text you want displayed on it, but with no event handling. So
you are going to add a MouseListener to the JButton.
In the MouseListener override the "mouseClicked" method
inside the method obtain the MouseEvent's location through "getX" and "getY". Next invoke the JButton's
"getLocation" method to obtain a "Point" object. Now invoke the "Point" objects "getX" and "getY" methods to return the int locations of the origin of the JButton.
Now invoke the "getSize" method of the JButton to get
a "Dimension" object containing the size of the JButton.
Now you can use boolean operations to determine if the
x, y coordinate that was obtained by the MouseEvent falls within the boundries of the JButton component.
Something like this:
public void mouseClicked(MouseEvent mouseEvent) {
Point point=jbutton.getLocation();
Dimension dimension=jbutton.getSize();
int pX=point.getX();
int pY=point.getY();
int dW=dimension.width;
int dH=dimension.height;
int mX=mouseEvent.getX();
int mY=mouseEvent.getY();
if(mX>pX & mX<(pX+dW)) {
if(mY>pY & mY<(pY+dH)) {
//This means that the point does indeed fall within
//the boundries of the JButton, so place the code
//that would normally appear in actionPerformed
//within this code block
Good Luck.

How to set line break points in JSF Facelets files on NetBeans?

I am running debugger on NetBeans. I can set line break points for jsp files but cannot for Facelets files with extension 'xhtml'. Dose anybody know how to set break points for Facelets xhtml files? Or is it possible to set break points for xhtml filles?
Thank you very much.

You can't. They aren't executable code, they are templates. The only executable code is the part inside #{}.

VSTO: How to set line break in Ribbon Xml?

Hi All,
I have a button in Ribbon.xml. it looks like:
<group label="myLabel" id="View">
<checkBox id="cbView" label="ViewViewviewviewview" getPressed="cbView_Pressed"/>
</group>
The result is shown as:
The checkbox is too long. My question is : How to set line break in checkbox's label.
Thanks a lot,
By the way, in Ribbon Xml. How to add RadioButton?

Hello Ricky,
The Fluent UI (aka Ribbon UI) doesn't provide any attribute or callback for that. You can try to use an escape sequence "\n\r", but I am not sure whether it helps. Also you may consider placing a text block below the check box control.
You can read more about the Ribbon UI in the following series of articles:
Customizing the 2007 Office Fluent Ribbon for Developers (Part 1 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 2 of 3)
Customizing the 2007 Office Fluent Ribbon for Developers (Part 3 of 3)

How can I set Line Width

Hello,
When I print a PDF document with a 3D annot in "Illustration" Mode, I've got a bad printing. All lines are too thin and sometime hidden.
Is it possible to set the line width? where? in U3D doc or directly in pdf3d engine ?
I apologize for my bad english.
Thank you for answers

I do not think it is possible in U3D - there seems to be no field setting line width in the U3D spec.
As to the "pdf3d engine" - likely no. I was complaining on this forum about similar problem with point size
(it can not be controlled and was changed from 1 pixel to 3x3 pixel in a new version of Reader)
and got the following reply from a man of Adobe (http://forums.adobe.com/message/1922684#1922684):
We try to adhere as closely as we can to published formats,
so as point size is not supported in U3D it is not displayed in Acrobat.
We have much greater influence over the content of PRC, so we can more quickly make improvements to that format.
The size of the points displayed by U3D was changed
- but as U3D does not support point sizes, it is not part of the U3D supported elements.
It seems lines and points parts of U3D spec are less important to Adobe than meshes,
so many features are not supported (some limitations are documented, some not).

Can I use differnet patterns for a "digital pattern match start trigger"

Hello,
Currently I would like use different patterns for a trigger the PCIe-6537 board to start capture data, for example, two patterns: 1101 and 1100 in digital IO lines line0:3, whenever one of this two pattern happens, start capture.
It seems like "digital pattern match" in DAQmx trigger can use one pattern only.
thanks!

Hi tt_ni,
Pattern I/O only allows the acquisition
based off of one pattern. This is a “limitation” of the hardware based on the
registers being set a certain way and monitoring a change from that. You could
add external circuitry to OR your patterns and based the pattern I/O off of the
output of that external circuitry. The other option is to look at an FPGA
option.
Mark E.
Precision DC Product Support Engineer
National Instruments
Digital Multimeters (DMMs) and LCR Meters
Programmable Power Supplies and Source Measure Units

Design Pattern for execution queue

Anyone know of any good design patterns for using a JMS Queue and MDB's
          as async
          execution queue which maintains execution order by some key


Enforced ordering on redelivery will be supported in the
          next release, but only if the application clamps the pipe-line
          size down to its minimum and the MDB pool size down to one.
          I don't think enforced ordering is supported in the current release.
          We are looking at least partially addressing the general design
          pattern below in the release after next. I don't think I can
          get away with being more specific. (Sorry.) Currently, I
          think something along the line of Larry's solution is the only way to
          accomplish it. Interestingly, the recent thread started
          by "[email protected]" on correlating requests and responses
          seems to be somewhat related.
          Tom, BEA
          Larry Presswood wrote:
          > Well you are both correct however we have something which works
          > however it does involve some threading primitives which generally is not
          > a good idea
          > inside wlas but seems to work.
          >
          >
          > Generally have a singleton on the server which has slots for each key
          > with message
          > numbering for each message and force a wait if message for key is out of
          > order
          > during fifo processing rules. IE do what things you can do in parallel
          > but gate for
          > the last step.
          >
          > I think there is a general remote execution pattern out there.
          >
          > The general problem to solve is this:
          >
          > In a messaging system you want to process messages for each key/session
          > in order however
          > with a large number of sessions its possible to parallel messages for
          > different sessions
          >
          > Otherewise you can either create custom queues or a topic with a
          > selector and then
          > create custom consumers which does not behave as well from a resource
          > perspective
          > as MDB's do.
          >
          >
          >
          >
          >
          >
          >
          > Nick Minutello wrote:
          >
          >>I may be completely wrong - but I think that Larry is referring to the inherant
          >>out-of-order message consumption that you get when using MDB pools to consume
          >>from a Queue.
          >>
          >>In short, the only design pattern here is to deploy the MDB to only one machine
          >>in the cluster - and set the pool size to 1.
          >>
          >>In-order execution is incompatible with the parallel execution that MDB's give
          >>you.
          >>
          >>-Nick
          >>
          >>
          >>
          >>Tom Barnes <[email protected]> wrote:
          >>
          >>
          >>>Hi Larry,
          >>>
          >>>Generally, I think it is best to have a seperate queue per key if the
          >>>
          >>>number of keys is small. This prevents starvation of a particular
          >>>message. For example when handling message-priority, low priority gets
          >>>
          >>>an MDB pool of size 1, high priority gets and MDB pool of size 10.
          >>>
          >>>Note that WebLogic JMS allows a queue to specify a sort-order keys based
          >>>on arbitrary message fields. Note that the in-flight message pipe-line
          >>>
          >>>between server and asynchronous clients is unsorted.
          >>>
          >>>Tom, BEA
          >>>
          >>>Larry Presswood wrote:
          >>>
          >>>
          >>>>Anyone know of any good design patterns for using a JMS Queue and MDB's
          >>>>
          >>>>
          >>>>as async
          >>>>execution queue which maintains execution order by some key
          >>>>
          >>>>
          >>>>
          >>
          >>
          >>
          >

How to set up database for form application in app. server 10g r2

Hi Friends and Bgrant.
I get user compiled fmb file.
I did not find componant in app. server.
However, I can see form server ment with 3 subitem : form compiler, formmigration and run form on the web.
The form application is supported by database. Other person already configured server for application .
I put a URL in URL field in run form on the web. I can see install ed successfully! Oracle application Server. Forme server. Oracle application server 10g. title: welcome oracle application server
after clicked OK button, the page is grey blank without any inforamtion to be displayed. No error message. status bottome as done. the page title as Oracle application server form server.
SO I think that i need to creade a datasource in app. server.
But I do not know how to fill field.
I can log into database from SQL*plus in server PC.
In datasource page in app. server: i copy a default ORCALEDS information
with new ID and password. it does not work
hereData Source Class:
JDBC URL :
JDBC Driver:
Location
Transactional(XA) Location
EJB Location
Thanks for any help!!
jim

Thanks for help!
I fixed issue of database connection with new issue.
Only display first form setting (first URL) for 4 different URL
URL:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=xxxx
net 3 form setting
However it only display one form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do?
I am waiting for your help!
JIm
Edited by: user589812 on Nov 24, 2008 1:49 PM

Setting Line Pattern for Lines

Similar Messages

Maybe you are looking for