Setting multiple paswords for sys user

hi there
is it possible that we set multi passwords for user : SYS ?
i'v heard it can be done
plz confirm this and tell me how if it is possible
thanks

mahdin-sotoudeh wrote:
hi there
is it possible that we set multi passwords for user : SYS ?
i'v heard it can be done
plz confirm this and tell me how if it is possible
thanksNo it's not possible. The password for the Sys can be just one and is setup in teh password file .
HTH
Aman....

Similar Messages

  • Multiple paswords for sys?!?

    Hello,
    Can anyone help me? I'm getting dizzy overhere...
    How is it possible to connect with the user sys with each pasword you image...?
    see next following snippet? (on Freshly installed Oracle10g)
    SQL> conn sys/whatever1@roadtest as sysdba
    Connected.
    SQL> disconn
    Disconnected from Oracle Database 10g Release 10.1.0.2.0 - Production
    SQL> spool c:\testpas.log
    SQL> conn sys/whatever1@roadtest as sysdba
    Connected.
    SQL> disconn
    Disconnected from Oracle Database 10g Release 10.1.0.2.0 - Production
    SQL> conn sys/whatever2@roadtest as sysdba
    Connected.
    SQL> disconn
    Disconnected from Oracle Database 10g Release 10.1.0.2.0 - Production
    SQL> conn sys/whatTheFuck@roadtest as sysdba
    Connected.
    SQL> disconn
    Disconnected from Oracle Database 10g Release 10.1.0.2.0 - Production
    SQL> conn sys/IDonThaveAClue@roadtest as sysdba
    Connected.
    SQL> disconn
    AND MORE IMPORTANT, HOW CAN I DISABLE THIS?!?

    Ok, after searching a bit more, I see that I'm not the only person with this issue.
    For persons with the same problem, see the following related problems/solutions.
    Why I can't change the internal password?
    Re: Can't change default SYS password
    how to change the default password file's name and path when the database created?
    password change

  • Always getting Invalid Pasword for Oracle User SYS

    Hello,
    I am installing IFS on Win XP.
    My database is on a remote machine.
    When I start with the configuration assistent of Oracle SMDK, he ask me to define the database to use.
    When I click on next I allways get the message Invallid pasword for Oracle user SYS
    I tested the connection via Oracle 9i client an that works properly.
    Can anyone help me please
    Thx in advantage.
    Database version: Oracle 9I Release 9.2.0.1.0
    Internet File system version: Oracle CM SDK

    I found the answer: getting the username with Get User Info on the User object gave me the username in a String. Using that, it worked like a charm.

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • ORA-01017: invalid username/password; logon denied FOR SYS USER

    Hello,
    I was usually login through the same password for sys user to log on to the database as sysdba, but last time i used " / as sysdba" to connect using local system administrative account which is connected very well and still connecting in the same way. The initializing parameter file set with the following parameter:
    remote_login_passwordfile=EXCLUSIVE
    Now if i use to connect the database server remotely using sys user, it gives me "ORA-01017: invalid username/password; logon denied" error and if i use the same login credentials on DB server machine using other local user accounts it is giving me "Insufficient Privilige" error. I can only connect now using local administrator account from DB server machine using " / as sysdba" statement.
    Kindly guide me the issue.

    When you use " / as sysdba" locally on server, you are using OS authentication which will bypass the password file and user/pass authentication.
    Looks like you have discrepancy between the password you use and real password. You can login " / as sysdba" and change your SYS password to a new one.
    When was last time you successfully login using password? What has changed since then?

  • HT1495 Can I set my iPad for different users? ie user - 1 login & user - 2 login

    Can I set my iPad for different users? ie user - 1 login & user - 2 login

    Afraid not. The iPad is not intended for multiple users.

  • How to set multiple senders for one account

    Hi all,
    I have a BIS account with my provider and a paid gmail account which collect for me mails from different address. Is it possible to set multiple senders for this account, thus it seems that I'm replying from one of these address and not only from my google address? In fact, it's important for me also that all mails come out from the same SMTP server (google).
    Thanks in advance.
    Best regards,
    Pierluigi

    For the BlackBerry to "send using" a specific email account, it must be set up on your BIS account as an email account, otherwise, you can send from that account.
    You can do that, and then block ALL incoming emails from those accounts, and allow only incoming mail from your one Gmail account, if you desire.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

    We are currently looking to set the default preferences in the CMC for all of our users.
    I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
    The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
    I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
    Thank you

    I thought I could just run it too but when I attempt to I get a Windows Script Host error:
    Script: C:\User Prefs.vbs
    Line: 1
    Char: 1
    Error: Expected statement
    Code: 800A0400
    Source: Microsoft VBScript compilation error.
    I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong.  I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

  • Set multiple passwords for single PDF

    Hi All,
    Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
    Thanks
    Augustine

    Thank you.
    Do you mean different IDs can be used for a single PDF and can make the PDF protected.
    Regards
    Augustine

  • Set business closure for a users

    i created a business closure in crm 2015 on a particular date,business closure is associating successfully with facility and equipment's but not associating with users.
    So how can be set business closure for a users ????

    Hello,
    The TechNet Wiki Discussion Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
    Please note that this forum exists to discuss TechNet Wiki as a technology/application.
    As it's off-topic here, I am moving the question to the
    Where is the forum for... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to set password expiration for EBS users

    how to set password expiration for EBS users .
    Regards .

    Please follow below steps:-
    This is available starting in RUP4.
    The script to expire all passwords in the fnd_user table is $FND_TOP/patch/115/sql/AFCPEXPIRE.sql.
    It can be executed from SQL*Plus or as a Concurrent Program: sqlplus -s APPS/ @AFCPEXPIRE.sql
    or Submit concurrent request: CP SQL*Plus Expire FND_USER Passwords
    This script sets the fnd_user.password_date to null for all users which causes all user passwords to expire.The user will need to create a new password upon the next login.
    Thanks,
    JD

  • How do I set up itunes for a user account on my windows machine so that it starts?

    Hi,
    My laptop was recently fitted with Windows Enterprise Edition.  I have a regular user account, and also a local administrator account.  I can get iTunes to run on my windows machine as an administrator, but not as a user.  All my calendar entries and contacts are in my user account, and I want to be able to start iTunes in that account.  What settings do I need to change?
    Thanks,
    Euan

    Hi Diesel,
    Many thanks for your reply. I have been doing that, but running it as an administrator means that my calendar info is not synced. I get a blank calendar on my iPad.  I need to be able to set it up so that users can run it in their own accounts. There must be a way to do this?
    Kind regards,
    Euan

  • How do I send multiple credentials for a user when he/she connects to iTune

    I want to be able to send multiple credentials when a user connects. For example, all students will get a generic student credential and may have one or more more specific credentials for access in certain sections or course pages. I presume I can send multiple credentials but haven't found a how-to. Since the credentials are strings, I presume all I need do is concatenate them to send them all at once. What is the delimiter character so that iTunes can parse it?
    Thanks,
    Rob

    Yes, you can send multiple credentials in an iTunes U URL request. The delimiter is the semi-colon.
    So, let's say you want to send two credentials ...
    Student@urn:mace:itunesu.com:sites:hogwarts.ac.uk
    Student@urn:mace:itunesu.com:sites:hogwarts.ac.uk:potions3yr
    your token string would have the following "credentials" token ...
    credentials=Student@urn:mace:itunesu.com:sites:hogwarts.ac.uk;Student@urn:mace:i tunesu.com:sites:hogwarts.ac.uk:potions3yr

  • Set default password for all users including csv file

    I would like to set the default password for all users
    including the ones imported in the csv file?
    Also now the default passwrd in set to the email address. How
    do i change that setting to the "login" setting in the csv file so
    those users can loin with that password?
    Kinda the same question but do yuo get the idea?
    Thank you,
    Chip

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

  • Set default application for *all* users

    Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
    When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
    I want to do that for all users of my mac, without repeating the getinfo process for each of them.
    Is there any adminstrative tools for doing that?
    Thank you.

    You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
    http://www.rubicode.com/Software/RCDefaultApp/

Maybe you are looking for