Setting Order Consolidation flag in Sales Order

Dear All,
I need to set order consolidation flag in sales order. I have already set order combination in customer master.
When i was creating the sales order i set the order combination flag in header and item level and i saved the order, the sales order is saved without showing error. But i display that sales order the order confirmation flag is reset in both header and item level.
Help me regarding this.
Thanks all
Raghu

Hi Raghu,
Please check the SAP note [447872|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=447872]
In your configuration, if you are using any reference sales org, check the order combination indication in the customer master of the reference sales area.
Also you can get in touch with an ABAPer who can debug in your program SAPMF02D for the logic of knvv-kzazu
Thanks & Regards,
P Gomatheeswaran

Similar Messages

Cannot update Override ATP flag on sales order line

Unable to update the override ATP flag on sales order line.
Is there any way that this functionality can be achieved.

Yes, I have set it to yes and it works.
Thank you

Setting up Billing Block for SALE ORDER during Invoice cancellation

Hi,
I have a requirement where in i need to set the billing block(VBAK-FAKSK) while saving Invoice cancellation document. Please suggest some user exit or BADI during Invoice save so that i can set the billing block in sale order header data.
Thanks in Advance,
Raghav
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 12, 2011 2:59 PM

Hi,
You can try TCode V.00
This transaction when executed will give you the list of all the sales documents blocked for delivery per sales organization. There are various other criteria which might be useful. This transaction will allow you to edit each sales document.
If this is not the one that you want, then perhaps you might have to develop one.
Thanks
Mukund S

How to set "Configuration Variant" for a sales order item using function

Hello All,
I use function module 'SD_SALES_DOCU_MAINTAIN' to create Customer Indep. Requirements but how to set "Configuration Variant" for a sales order item.
Is their any idea or sample code?

Hi Zhijun zhang,
<u>http://help.sap.com/saphelp_nw2004s/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm</u>
<u>http://help.sap.com/saphelp_nw04/helpdata/en/c0/980374e58611d194cc00a0c94260a5/content.htm</u>
A variant is simply an SAP report where the parameters for running the report have been set by the user and then saved with unique name. This allows future retrieval and execution of the report faster without reentering the parameters. As a convention the variant name should start with with the digits 50 so searchs for LHU variants is easier and quicker.
The first link will guide you by screen shot wise.
Award points if it adds information.
Thanks
Mohan

Value Set error msg when opening sales order Form

Hi
I created a value Set(where the values are populated at run time based on a view) which is attached to DFF (column eg Attribute13),The Value set would get value populated only if any sales order lines are cancelled, as the value of Attribute13 on cancelled line would be inserted to new Order Line.
The Problem is when ever the Sales order Form is opened it throws the error message
"Value XX For the FlexField Segment dosent not exists in the valueset (Valueset name)" as the oe_order_lines_all.attribute13 has value and the value set has null, it matches it and throw the above error.
Could you guys give any suggestion how to avoid it, or is there any workarould , Thanks
Thanks

This tells me that the same attribute is used for something else and there is a value in that the column that is not your table which you are validating against. Or the value you are setting is not in that table.
About the context: If the same attribute is used under a different context AND if that context gets set when you open the sales order AND if the validation type is different under that context for attribute13, you will get this error.
Thanks
Nagamohan

Set Mass Deletion Flag for production orders

Hi,
I am planning to set mass deletion flag for production orders using programme PPARCHP1.
My users dont have access to SE38/SA38 and they cant run this program from directly.
I dont wnat my users to do this preprocessig using SARA or CO78 as it will give access to them for whole archiving process + it only works in background.
I am thinking to create a Z tocde for this program and use it in dialogue mode also. Do you guys see any aftereffects with this process?
Let me know if creating a Z tocde sounds a good idea?
Edited by: santosh sarda on Mar 10, 2011 3:23 AM
Edited by: santosh sarda on Mar 10, 2011 3:28 AM

The standard SAP procedure to set the archive is that
- you run COAC in background to set deletion flag and deletion indicator. It should be set as the variant and run periodically (i.e., monthly).
- The system get all orders with DLV status in the past xx days depending on your variant to set deletion flag.
- Also it will change the status DLFL to DLT based on your residence time 1.
- The orders with DLT that reside in system longer than residence time 2 then archive.
This should be done by IT department or background jobs. Not the users.
Which, in my opinion, is enough. However, if you do need the user to select by themselves which orders they want to set deletion flag (why is that?). Then you may want to explore enhancement.
For the sake of simplicity, I will recommend to use user status (normal cohv can change that, as we know; therefore no new fancy screen needed). Then develop the user exit to set deletion indicator in PPCO0002 - EXIT_SAPLCORE_001 based on user status. The rest of the procedure should remain the same.
If you want to allow user to do every steps and develop some Z* screen for users, they must have the authorization for archiving anyway. They just don't have the t-code COAC, and SARA. In my opionion, it is overkill. Plus in terms of users, I don't think they have skills enough if there is some errors during archiving (i.e., logical file error, etc.).
Hope it helps.

PO order number error in Sales order

Hai Everybody,
I have a problem of PO order number error in the sales order.
While creating Sales order, i am entering the PO order number in SO.
Though the document is complete, i am getting this error message : "ordering errors; tested ORGID: 7147144007" and unable to proceed further (saving order & delivery).
Please give me some inputs to solve the issue.
Thanks in advance
Jaya

Thanks for your inputs.
@Ram : i have created the same senaerio in Quality system though manual entries still i am facing the same problem i dont know how they have created in Production system, how to find out please tell me.
@Raghu.k : i have checked in VOV8 ( check po number is set blank which means no check ), still i am facing the problem.
Please suggest further to solve the issue.
Thanks
Jaya

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

Replicate custom fields from CRM sales order to R/3 sales order

Hi Michael,
I have a requirement to replicate custom setype data created for CRM sales order to R/3 sales order.These fields have been created at item level.
Do you know the set of steps to achieve the same.
Any help would be appreciated.
Thanks,
Chamu

Hi,
the CRM sales order cannot be extended using set types. Set types are a functionality that is limited to products.
You can however enhance the orders by using the easy enhancement workbench (ransaction EEWB). It will allow you to add specific fields to all levels of the sales document and will take care of ALL the objects that are necessary to update and maintain he fields (functions, screens, bdocs, bapi's,...)
Depending on you system, it will also generate the update modules for R/3 (don't bet on it). Otherwise you'll have to program the extraction and mapping of the new fields in R/3.
Michael.

Purchase orders manily against the sales orders

My client do purchase orders manily against the sales orders... but to meet the minimumn purchase order quantity or value they club many sales orders in a single purchase order... now is there any way to track for what sales-order-item what purchase-order-item made?? (in SAP B1 2007 B PL7)

Hi
By Design ,SAP creates link between SO to PO when you create PO based on SO .
Then you can use TargetDoc which is PO Number and can be seen in row level
If it is disabled , you can enable it through form setting .
I usually ask my user to start with SO . When they are ready to make purchase , they can click on purchase check box on SO and create PO based on SO . This way the link stay as B1design .
The reason of this you can see the PO and (orrange arrow link) which can let you navigate your PO from AR module .
An other workaround ,user defined field can be used at row level and manually link
Hope this helps
Bishal

What is the table to get the all planned orders related to a sale order

Hi,
May i know what is the table to get the all planned orders related to a sale order. My scenario is make to order scenario. we can get my out put final product by completing the nearly 916 planned orders.(Like major assemble,sub assemble). From this scenario i want the total orders related to a sale order. ( The planned orders from sale order to sale order will change. i.e 1 sale order will have 916 planned orders and one sale orders will generate 920 like that will chage when running mrp.). Now i want to pick the total planned orders for a sale order in a report. please guide me.
Regards,
Mastan.

Hi,
Use the table PLAF... in this table pass the sale order no in the filed KDAUF and then execute...issue here is once the planned orders are converted production orders, these planned orders are deleted from the system....so you will not able to see them.....
Thanks
Kumar

How to transfer cost from old sales order (cancelled) to new sales order

Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
Thanks

Hi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

BAPI for creation of Production Order with Ref to sales order

Hi all,
we are using BAPI_PRODORD_CREATE for creating Production Order with ref to sales order.
As per the Business Scenario, we are not creating any masters like BOM and Routing, instead
we are creating Routing directly into the Production Order under operation overview screen.
during creation of routing system is generating a default operation.
the following is the error results after running the Bapi.
"No routing selected"
Best Regards.
GTNRNR.

Hi GTNRNR,
with out creation of BOM you created routing and in routing for the operations which components did you allocated so that can be used to manufacture the final product. Can you be please specific?
Regards,
Madhu.G

Settlement Rule for service order created based on sales order

Hello,
I am creating a sales order and entering WBS as an cost object.
After creation of sales order the Service order is created.
For service order type in the settlement profile WBS is maintained.
But the system is not copying the WBS in Service order which is maintained in sales order.
Can any body have an idea on this?
Regards
Abhijit

Hi,
As far as my understanding when service order is created through sales order then settlement rule is SDI and its item number
Not what you maintained in account assignment tab of sales order
When you settle service order then cost will settle on sales document and its item and then latter you settle sales order then settlement receiver is WBS element which you maintained in account assignment tab
Kapil

Setting Order Consolidation flag in Sales Order

Similar Messages

Maybe you are looking for