Setting performer for embedded workflow

Hi,
Can anyone tell me as to where we can define and assign a performer to an already defined(embedded) workflow. Do we need oracle workflow builder or can it be done in workflow administrator.
We are using Payables open interface workflow and a notification must go to a performer upon custom validation failure. We'd want the user to be able to query the notifictaion and view the notification from time to time. Also, what is to be done to send an email notification to the performer?
Thanks in advance

This depends a bit on when you want to assign the performer and how the process was initially defined. I am not familiar with that particular workflow process, but for example if the notification has already been sent but not responded to, the administrator could simply reassign the notification in the Workflow Monitor. Before the notification is sent, if the performer defined for it in the Builder was specified as an item attribute, then the administrator could go into the Workflow Monitor during runtime and set the value of that item attribute. However if the performer was hard-coded to a certain role, then the change would have to be made in the Builder and would be effective only for process instances started after that point. Also if you are talking about adding a notification that is not already in the process, that would have to be done in the Builder as well.
Note that if you are making any changes to a seeded workflow in the Workflow Builder, it is very important to follow the customization guidelines to ensure that the changes will be supported. See the Oracle Workflow Guide and the Payables documentation for details.
To send an e-mail notification, you must run the Notification Mailer, and the user must have a valid e-mail address defined as well as a notification preference for receiving e-mail. For details, see the Setting Up Oracle Workflow chapter in the Oracle Workflow Guide.

Similar Messages

Can't set parameters for embedded audio files using css

I'm embedding numerous audio files in Dreamweaver CS3 using
the <embed> tag. I'm using CSS to control the box size and
other attributes relating to how the file displays on the page, but
I'd also like to set the parameter "autoplay" to false, and
controller to "true," for all of the audio files. I've been doing
this individually for each file (very time consuming), because I
can't figure out a way to do it with CSS. Is there a way to set
those parameters in CSS and apply it to all files?

.oO(teachAA)
>I'm embedding numerous audio files in Dreamweaver CS3
using the <embed> tag.
>I'm using CSS to control the box size and other
attributes relating to how the
>file displays on the page, but I'd also like to set the
parameter "autoplay" to
>false, and controller to "true," for all of the audio
files. I've been doing
>this individually for each file (very time consuming),
Search & replace exists.
>because I can't figure
>out a way to do it with CSS. Is there a way to set those
parameters in CSS and
>apply it to all files?
No. CSS is for presentation, but these parameters belong to
the HTML and
have to be written there.
BTW: The 'embed' element is invalid HTML. If you care about
valid markup
and your site doesn't have to be compatible with really old
browsers
like NN 4 or IE 5.5, then you should use the valid method
using 'object'
elements.
Micha

Set up Lightroom for my workflow - Help Please!!

Hi Guys,
(PC/Win XP pro/Lightroom 1.3/PS CS3 running on large PC with plenty of everything!! - Printing on 7880 Epson through qimage)
I have been working on Bridge/CS3 and want to set uplightroom for the following workflow (easy in Bridge but I cant seem to figure it out in LR).
I want all raw images to reside in a folder on HDD (say jane smith wedding). (that bit is easy- even I could manage that!)I want all work files (Xmp or whatever) and all developed images (low/high res) to reside in the same folder (there was a simple command in bridge - export to same location - that could be set as default but I cannot find in LR.)
I also need to export a jpeg crop ( I cant find a crop tool for inches!!)of my corrected image at say 10x7@ 240dpi for inkjet printing through Qimage and a second jpeg say @ 70dpi with copyright mark for a slideshow in proshow gold.(is there a setting for "save in same location with work files). So I would end up with a folder for example R/jane smith wedd with subfolders develops and previews. This folder should contain ALL workfiles so when i archive ALL files go with it. ( also I would be able to open the raws with corrections applied on a home computer with CS3 but not lightroom running.)
I admit Im thick!!
Any help would be really appreciated, nigel
PS: Memo to Adobe: What were you thinking of with no way to save contact sheets.......? Also no way to export music with the slideshow......?

1. You need to turn on "automatically write XMP" in preferences. Then the settings data will be saved as you make changes in LR and CS3 can use these settings to open images. You could also convert to DNG for the same end result.
2, If you want your exports in the same folder then just select that folder in the export dialogue. You also have the option of creating a sub folder to store the exports in. It doesn't have a save to same location default but it's not such a pain to pick a folder. I actually send my edits to a different drive just in case of corruption.
3. There's no cropping done by the crop tool so you can't assign a dpi to it. Crop it the way you like it (you can set an aspect ratio if you like. Nothing happens until you export and that's where you select dpi, watermarking etc for output files. In the export dialogue just enter the settings you want. You can also save several sets of output settings for quick retreival later on.
4. To save contact sheets install a free PDF printer and just print the contact sheets to it. Mind you because Adobe wont let you select sRGB as an output space and insists on Pro Photo RGG (don't get me started...) the colours will be washed out and horrible. You can also save your contact sheet settings so redoing it really isn't that big of a deal. Printing and saving contact sheets worked really well up to 1.1 after that Adobe broke it and it's the thing I miss the most. All they need to do is allow us to select an output colour space when using printer managed printing so I can have sRGB printing back.
Don't know about the slide show thing, sorry.
Hope this helps
Gordon

Integration setting for default workflow or creator or BP not set

Hello,
I am recieving the following error when trying to create a BP via web services: Integration setting for default workflow or creator or BP not set.
Can someone let me know what I need to do to resolve this.
Thank you
Rudy

Hi Sean,
This is what I have discovered so far. Open the Company Workspace tab and switch to Admin mode. Expand Company Sponsored Shells, expand Projects, select/open the project, under Setup/Business Process select/open the BP. Expand the BP in the tree, select Workflow Setup. Add a new setup, making sure it is Active. Go Back to the BP, open it, on the Auto Creation tab select the Setup, Creator and Action.
After doing this I recieve an error trying to add a Contract in the project "Cost Sheet is not setup" and via the web services the error is "Error processing XML" status 165. Looks like I have more to configure.

What is the workflow for embedding FLV into website?

I have a client that I created FLV files for. Now his "web guy" is asking me how
to create SWF files so he can embed them onto his web pages. I
explained that Premiere only creates FLV and F4V files. My understanding is that he needs Flash
Pro CS5 to create the SWF files. Is this correct? I have been all over the web looking for t
he workflow for embedding video files like they do on you tube. I'm a videographer dammit, not a web designer!!
thanks for your time,
Stuart

There is really no need for him to get Flash if he doesn't already have it, he can use the embedding method in DreamWeaver or better yet, use a third party video player like
JW Player:
http://www.longtailvideo.com/players/jw-flv-player/
or Flow Player:
http://flowplayer.org/
just to name two.
Adninjastrator

DAC as schedular tool for Informatica workflows(Not for OBIApps repository)

I have to use DAC as administrative / scheduler tool for Informatica workflows. Earlier, I configured the same for OBI Apps. It's running fine. Now I am not refering to Oracle_BI_DW_Base.rep which is the inbuilt repository provided with OBI Apps. I have to run my workflows through DAC. I have gone through the below listed steps to achieve the same,
1) Created New USER
2) Used that user to configure DAC connection as well as for DAC repository tables. (am not sure whether it is a best practice or not)
3) Created a new Source System Container. (no containers were there initially)
4) I have folder in Informatica as "MyRep", so I created task logical and physical folders with the same name in DAC (Tools => Seed Data =>........)
5) Created new Subject Area, tables, tasks, performed Synchronize Tasks.
5) Set up informatica servers, Physical Data Sources. Tested them, no flaws.
6) Added new Execution Plan.
7) Assigned Subject Area to it.
8) Clicked on "generate" button in parameters section of execution plan. No Parameters generated. Now got into confusion.
*9) I couldn't find my tasks listed in ORDERED TASKS tab.*
10) Clicked on BUILD. Then got error message as below,
MESSAGE:::No tasks were found to build this execution plan.
Please do let me know what is the wrong step here.
Thanks,

Thanks Ahsan, it solved my problem.
I forgot to set Configuration Tags properly, later Assembled the subject area. Cheeeeeeerrrrrrsss... It's working
Edited by: ABT on Dec 19, 2011 9:49 PM

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Good Premiere pro Cs5.5 Video Editing Computer Set Up For Under $3000

Hey everyone im hopeing to hear for Harm Millaard input on this and anyone elses who understands PC computers for video editing. I need to build a computer set up for my specific needs. I am a youtuber who makes videos for a living and I need a speedy computer for editing primarily in premiere pro CS5.5 and sometimes in After effects. I use magic bullet 2.0 color grading in almost all my videos so that slows my computer down alot. The current computer I have now shuts off when ever it runs to much stuff and gives me the BSOD so its extreemly fusterating because editing something small can take me all day because of the constent shutting off. Mostly does BSOD when I uses Magic Bullet 2.0 I shoot with DSLR footage but once in a while it will happen out of the blue when running alot of things but mostly when exporting. I need a list of specs that will all work together to give a perfect workflow for my needs and I also would like advice on what Raid because I dont fully understand it as well as what back up drives etc should I have. I plan of buying the specs and having someone build it for me and set up raid etc that knows how to do all that. In case some of you wonder what type of computer I have now these are the specs if you need more information on what I have in my computer ask exactly what info you want to me to tell you and ill look it up.
If you have advice on specs I dont have to re-buy that I could take out of this computer to save money then that would be better as well. I currently have no back up external drives as well so Idk what I should buy for that as well. Thank you all for your time a head of time!

Well!!!!.....where do I start?? You must spend some time here reading all the valuable info that has been presented and discussed many times here. Basically, PPro is a very demanding , PROFESSIONAL program that needs beefy and SPECIFIC hardware to run properly.
AMD CPU will not cut it.....it lacks the necessary instruction set that Intel has that apply to video processing.
You need a fast Intel i7 CPU for starters.
You do not mention video card.....NVidia CUDA card of over 1GB video memory is required to enable the "Mercury PlaybackEngine", which provides a TEN TIMES INCREASE in rendering speed of previews.....not to mention accelerating the export process by handling some specific effects during export.
Some DSLR codecs,( like Canon MOVs) cause PPro....which is a 64bit program..... to open the 32 bit " Quick time Importer" process, ( as Quick Time is 32 bit), slowing down the process, even with good hardware. Editing highly compressed consumer codecs,( AVCHD,etc.) in real time ,then exporting can be very taxing on a computer, requiring top -notch components. Even if you do it the old way and transcode to a more edit friendly codec before editing.....you would then need a larger,faster disk system to handle the huge files at a high speed!!!
16GB system memory is OK for 5.5.....with 6 and later, 32GB is better.
Two separate hard drives are the required minimum for PPro......currently, the best performing and cheapest setup would be : C drive= 120GB quality SSD, D drive = 2x 7200 RPM HDDs in onboard RAID 0 for pagefile,previews, and all cache files. E drive= same setup as "D", for media,project files, and export. F drive = large 7200 rpm disk for necessary backup of important files and backup of "D" drive. All drives should "indexing" and" compression" turned OFF,( under drive Properties window).
Less expensive would be just three separate 7200 RPM HDDs...that could be OK with just DSLR footage which is so compressed that it requires less actual MB/sec., unless you are using many tracks of video, upping the requirement needed.
Read the many posts and articles by Harm Millard and Bill Gehrke....they have contributed a tremendous wealth of knowledge and experience to the readers.....preventing many from making bad purchases and expensive mistakes when trying to construct a machine that will perform well....their website, PPBM5 is invaluable as it can show you all the video benchmark results of differently configured machines. It is a good guide as to what you may want to build,or, purchase.....Good Luck!!

To trigger Overall release for PR workflow (WS20000077)

Hi,
I want to know that how can i trigger overall release for PR workflow ( WS20000077 ) of BUS 2105.
rightnow in my system workflow WS0000038 is activated & when i perform ME51N it is triggred perfectly. and in SWEL BUS2009 is triggered, but it wont trigger BUS2105.
So how can i trigger BUS2105 & instead of BUS2009, so it will trigger WS20000077 workflow.
Which seetings needs to be done in SPRO, so it will trigger BUS2105?
And please give me some idea about overall release for PR workflow & item level release for PR workflow.
Regards,
Smit

Hello,
Right now, the release strategy is configured item-wise for the PR and so the business object BUS2009 is triggered. To make the release of PR from Item-wise to overall, please make the following configurations in SPRO
SPRO -> MM -> Purchasing -> Purchase Requisition -> Define Document Types and check the 'OvrelReq' checkbox and then
SPRO -> MM -> Purchasing -> Purchase Requisition -> Release Procedure-> Procedure with classification->Set Up Procedure with Classification and maintain the Release Groups by checking the 'OvrelReq' checkbox.
Once these configurations are done, first check whether the event 'RELEASESTEPCREATED' is published in the system from the event log(SWEL). Once an entry is found,deactivate the linkage between template WS0000038 and activate the linkage of the template WS20000077 which is for the BO BUS2105.
Hope this will help.
Thanks,
Samson

Report Performance for GL item level report.

Hi All,
I have a requirements to get GL line items
report based on GL Line items so have created data model like 0FI_GL_4->DSO-> cube and tested everything is fine but when execute in production the report performance is very bad.
Report contains document number, GL act, comp.code, posting date objects.
I have decided to do as follows to improve reporting performance
· Create Aggregate on Document, GL characteristic
· Compression.
Can I do aggregates 1st then do the compression.
Please let me know if I missing out anything.
Regards,
Naani.

Hi Naani,
First fill the Aggrigates then do Compression,run SAP_INFOCUBE_DESIGN Check the size of Dimension maintain Line item, High cordinality to the dimension, Set Cahe for query in RSRT,
Try to reduce Novigational Attr in report. Below document may help you.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6071ed5f-1057-2e10-deb6-d3426fec0219?QuickLink=index&…
Regards,
Jagadeesh

Setting timeout for all the web test scripts in the solution

Hello,
I have around 16 web test scripts (using VSTS 2010 ultimate version) in my project (in a solution). By default the timeout set for each request is 60 sec. I need to increase the timeout to 180 sec. Currently, I am clicking on each request and modifying
the timeout parameter from the Properties window.
Is there any common setting for timeout available which would be acting across all the scripts?
Thanks.

Hello,
We only can set Timeouts for a separate request in Visual Studio Web Test. There is no way to set Timeout for all requests in VS IDE. But you can write you own logic code using
Timeout Property in a web test plugin to set Timeout for all requests in a web test.
About how to write a web test plugin, please see:
How to: Create a Web Performance Test Plug-In
Best regards,
Amanda Zhu <THE CONTENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED>
Thanks
MSDN Community Support
Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

How to set filter for few Setup Objects on Geneneral Foundation?

Controlling the download of sub-entities:
By default all sub-entities are downloaded. Pass a non-existing value
for the parameter (primary key) of the sub-entity if you don't want to
download a specific sub-entity.
For example, if you don't want to download the values of a value set,
then use following input to FLEX_VALUE attribute while setting filter;
FLEX_VALUE='THIS_IS_A_NON_EXISTING_VALUE_I_DONT_WANT_TO_DOWNLOAD_VALUES'
VALUE_SET
Notes:
- To download '$FLEX$.%' value sets pass '$FLEX$.%' argument.
- Upload API automatically submits the hierarchy compiler request
- FLEX_VALUE_SET_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Value Set Values.
VALUE_SET has subenities such as VSET_SECURITY_RULE, VSET_ROLLUP_GROUP and VSET_VALUE.
Setting value for attribute FLEX_VALUE_SET_NAME downloads all the subentities. If you want
to restrict the subentities, set appropriate filter at VSET_SECURITY_RULE, VSET_ROLLUP_GROUP
and VSET_VALUE.
Parameters:
VALUE_SET
| FLEX_VALUE_SET_NAME : Value set name.
|
+-VSET_SECURITY_RULE
| FLEX_VALUE_RULE_NAME : Value set security rule name.
| PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
|
+-VSET_ROLLUP_GROUP
| HIERARCHY_CODE : Hierarchy (rollup group) code.
|
+-VSET_VALUE
PARENT_FLEX_VALUE_LOW : Independent value for the dependent value sets.
FLEX_VALUE : Flexfield segment value.
DESC_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the DFV view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Descriptive Flexfields.
DESC_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes DESC_FLEX and DESCRIPTIVE_FLEXFIELD_NAME downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at DFF_REF_FIELD, DFF_CONTEXT
and DFF_SEGMENT.
Parameters:
DESC_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| DESCRIPTIVE_FLEXFIELD_NAME : Descriptive Flexfield Name.
|
+-DFF_REF_FIELD
| DEFAULT_CONTEXT_FIELD_NAME : BLOCK.FIELD reference field name.
|
+-DFF_CONTEXT
| DESCRIPTIVE_FLEX_CONTEXT_CODE : Context Code
|
+-DFF_SEGMENT
END_USER_COLUMN_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
KEY_FLEX
Notes:
- Upload API automatically submits the flexfield compiler request
- Upload API automatically submits the KFV view generator request
- Upload API automatically submits the structure view generator request
- APPLICATION_SHORT_NAME is a required argument for download.
You can find the following parameters in Set Filter screen of Key Flexfields.
KEY_FLEX has subenities such as DFF_REF_FIELD, DFF_CONTEXT and DFF_SEGMENT.
Setting value for attributes APPLICATION_SHORT_NAME and ID_FLEX_CODE downloads all the subentities.
If you want to restrict the subentities, set appropriate filter at KFF_FLEX_QUAL, KFF_SEGMENT_QUAL,
,KFF_STRUCTURE,KFF_WF_PROCESS,KFF_SH_ALIAS,KFF_CVR_RULE and KFF_SEGMENT.
Parameters:
KEY_FLEX
| APPLICATION_SHORT_NAME : Application Short Name.
| ID_FLEX_CODE : Key Flexfield Code.
|
+-KFF_FLEX_QUAL
| | SEGMENT_ATTRIBUTE_TYPE : Flexfield Qualifier Name
| |
| +-KFF_SEGMENT_QUAL
| VALUE_ATTRIBUTE_TYPE : Segment Qualifier Name
|
+-KFF_STRUCTURE
| ID_FLEX_STRUCTURE_CODE : Structure Code
|
+-KFF_WF_PROCESS
| WF_ITEM_TYPE : Workflow Item Type
|
+-KFF_SH_ALIAS
| ALIAS_NAME : Shorthand Alias Name
|
+-KFF_CVR_RULE
| FLEX_VALIDATION_RULE_NAME : Cross Val. Rule Name.
|
+-KFF_SEGMENT
SEGMENT_NAME : Segment Name
APPLICATION_COLUMN_NAME : Column Name
MENU
You can find the following parameters in Set Filter screen of Menus.
PARENT_MENU_NAME Name of the menu to start downloading at. If this
parameter is specified on its own, that menu and
all its children will be downloaded. If specified
with FUNCTION_NAME and/or SUB_MENU_NAME, then only
the menu entry with that function and/or submenu name
immediately under the PARENT_MENU_NAME will be
downloaded.
FUNCTION_NAME Function name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the function on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded; all other
menu entries under PARENT_MENU_NAME will not be
downloaded.
SUB_MENU_NAME Sub Menu name to limit download to. If this parameter
is specified then PARENT_MENU_NAME must also be
specified in order to download menus. Specifies
the Sub Menu on a menu entry immediately under
PARENT_MENU_NAME which will be downloaded (along with
all its children); all other menu entries under
PARENT_MENU_NAME will not be downloaded.
MENU_APP_SHORT_NAME Application short name of Menu. The menu on the resp
for this application will be downloaded. If you
pass this parameter, do not pass any of the other
parameters; this parameter is only supported on its
own.

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

To set HOTSPOT for a field in ALV-oops and when clecked should call transac

Hi,
I need to set HOTSPOT for a field in O/P list using ALV-oops and when clecked should take me to Transaction VA01. Please help....
Thanks,
Prabhu

Hi,
Please go through this code it may help u.
REPORT zcls_alv_oops MESSAGE-ID z1.
TABLES : mara.
Types Declaration..\
TYPES :
BEGIN OF t_mara,
matnr TYPE matnr,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_mara,
BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mtart TYPE mtart,
maktx TYPE maktx,
END OF t_marc.
Internal Tables Declaration..\
DATA :
i_mara TYPE TABLE OF t_mara,
i_marc TYPE TABLE OF t_marc,
i_fcat1 TYPE lvc_t_fcat,
i_fcat2 TYPE lvc_t_fcat.
Constants Declaration..\
CONSTANTS :
c_cont1 TYPE scrfname VALUE 'CONT1',
c_cont2 TYPE scrfname VALUE 'CONT2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
SELECT-OPTIONS:
s_matnr FOR mara-matnr NO INTERVALS.
SELECTION-SCREEN SKIP 1.
PARAMETERS :
p_hotspt RADIOBUTTON GROUP r1 DEFAULT 'X',
p_bttn RADIOBUTTON GROUP r1.
SELECTION-SCREEN END OF BLOCK b1.
\* Class forward referncing.
CLASS lcl_rcvr_class DEFINITION DEFERRED.
\* Pointers Declaration..
DATA :
lp_rcvr TYPE REF TO lcl_rcvr_class,
lp_cont1 TYPE REF TO cl_gui_custom_container,
lp_cont2 TYPE REF TO cl_gui_custom_container,
lp_grid1 TYPE REF TO cl_gui_alv_grid,
lp_grid2 TYPE REF TO cl_gui_alv_grid.
\* Local Class Definiton.
CLASS lcl_rcvr_class DEFINITION.
PUBLIC SECTION.
METHODS :
hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column.
ENDCLASS.
\* Local Class Implementation.
CLASS lcl_rcvr_class IMPLEMENTATION.
METHOD hotspot_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row_id-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD handle_double_click.
DATA :
wa_mara TYPE t_mara,
wa_marc TYPE t_marc.
DATA :
l_index TYPE sy-tabix.
READ TABLE i_mara INTO wa_mara INDEX e_row-index.
IF sy-subrc EQ 0.
REFRESH i_marc.
SELECT matnr
werks
INTO TABLE i_marc
FROM marc
WHERE matnr EQ wa_mara-matnr.
IF sy-subrc EQ 0.
LOOP AT i_marc INTO wa_marc.
l_index = sy-tabix.
wa_marc-mtart = wa_mara-mtart.
wa_marc-maktx = wa_mara-maktx.
MODIFY i_marc FROM wa_marc INDEX l_index
TRANSPORTING mtart maktx.
ENDLOOP.
CALL SCREEN 200.
ELSE.
MESSAGE e121 WITH text-005 wa_mara-matnr.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
\* Start of Selection
START-OF-SELECTION.
\* Extract the Material Master data for the Input Material.
SELECT a~matnr
a~mtart
b~maktx
INTO TABLE i_mara
FROM mara AS a
INNER JOIN makt AS b
ON a~matnr EQ b~matnr
WHERE a~matnr IN s_matnr
AND b~spras EQ sy-langu.
END-OF-SELECTION.
IF NOT i_mara\[\] IS INITIAL.
\* Call Screen to display the Material Master data.
CALL SCREEN 100.
ELSE.
MESSAGE s121 WITH text-006.
ENDIF.
\*& Module DISP_GRID OUTPUT
\* text
MODULE disp_grid OUTPUT.
\* Build the Field catelog for Material Master data.
PERFORM build_fcat.
\* Display the Material Master data using ALV.
PERFORM disp_alv.
ENDMODULE. " DISP_GRID OUTPUT
\*& Module USER_COMMAND_0100 INPUT
\* text
MODULE user_command_0100 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
\*& Form build_fcat
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARA'.
IF p_hotspt EQ 'X'.
ws_fcat-hotspot = 'X'.
ENDIF.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARA'.
APPEND ws_fcat TO i_fcat1.
CLEAR ws_fcat.
ENDFORM. " build_fcat
\*& Form disp_alv
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv.
IF lp_cont1 IS INITIAL.
\* Create the Container Object of Material Master.
CREATE OBJECT lp_cont1
EXPORTING
container_name = c_cont1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6 .
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Master.
CREATE OBJECT lp_grid1
EXPORTING
i_parent = lp_cont1
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Master data by calling method.
CALL METHOD lp_grid1->set_table_for_first_display
CHANGING
it_outtab = i_mara
it_fieldcatalog = i_fcat1
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Set Handler for the Hot Spot Event.
CREATE OBJECT lp_rcvr.
IF p_hotspt EQ 'X'.
SET HANDLER lp_rcvr->hotspot_click FOR lp_grid1.
ELSE.
SET HANDLER lp_rcvr->handle_double_click FOR lp_grid1.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " disp_alv
\*& Module STATUS_0100 OUTPUT
\* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN_STAT'.
SET TITLEBAR 'T_100'.
ENDMODULE. " STATUS_0100 OUTPUT
\*& Module STATUS_0200 OUTPUT
\* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'PLANT_STAT'.
SET TITLEBAR 'T_200'.
ENDMODULE. " STATUS_0200 OUTPUT
\*& Module DISP_GRID_plant OUTPUT
\* text
MODULE disp_grid_plant OUTPUT.
\* Build the Field catelog for Material Plant data.
PERFORM build_fcat_plant.
\* Display the Material Master Plant data using ALV.
PERFORM disp_alv_plant.
ENDMODULE. " DISP_GRID_plant OUTPUT
\*& Module USER_COMMAND_0200 INPUT
\* text
MODULE user_command_0200 INPUT.
\*when exit or cancel is clicked program has to come out
CASE sy-ucomm.
WHEN 'EXIT' OR 'CANC'.
LEAVE PROGRAM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
\*& Form build_fcat_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM build_fcat_plant.
DATA : ws_fcat TYPE lvc_s_fcat.
ws_fcat-fieldname = 'MATNR'.
ws_fcat-scrtext_m = text-001.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'WERKS'.
ws_fcat-scrtext_m = text-004.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MTART'.
ws_fcat-scrtext_m = text-002.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ws_fcat-fieldname = 'MAKTX'.
ws_fcat-scrtext_m = text-003.
ws_fcat-tabname = 'I_MARC'.
APPEND ws_fcat TO i_fcat2.
CLEAR ws_fcat.
ENDFORM. " build_fcat_plant
\*& Form disp_alv_plant
\* text
\* \--> p1 text
\* <-\- p2 text
FORM disp_alv_plant.
IF lp_cont2 IS INITIAL.
\* Create the Container Object of Material Plant data.
CREATE OBJECT lp_cont2
EXPORTING
container_name = c_cont2
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Create the Object for Grid of Material Plant data.
CREATE OBJECT lp_grid2
EXPORTING
i_parent = lp_cont2
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
\* Dipslay Material Plant data by calling method.
CALL METHOD lp_grid2->set_table_for_first_display
CHANGING
it_outtab = i_marc
it_fieldcatalog = i_fcat2
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDIF.
ELSE.
\* Call method 'REFRESH_TABLE_DISPLAY' to refresh the grid data.
CALL METHOD lp_grid2->refresh_table_display.
ENDIF.
ENDFORM. " disp_alv_plant

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

RDS Gateway 2012, RemoteApp Displays "A Revocation check could not be performed for the Certificate" via RDWEB

I have searched through the forums and there are a number of posts that are similar but all the checks they list seem to not apply to this one.
My current setup is as follows
All Servers are 2012 R2
1 x DC server
1 x RDS Gateway server with RDS Web installed
1 x Session Host Server
Certificate supplied by godaddy with 5 names. (included is the name of the RDS Gateway/Web server in the certificate, the internal name of the session host server is not included as the internal names are differnet to the external)
My tests are as follows
Navigating to the RDSWEB page from a machine inside the same network (windows 7 sp1) but not on the same domain is fine no errors and logging in and launching any published application is fine with no errors.
However logging in on another machine that is external from the network (windows 7 sp1) is ok up to the point of launching any of the published apps I get the error about ""A Revocation check could not be performed for the Certificate". this
prompts twice but does allow you to continue and login and use the app till the next time. If I view the certificate from the warning message all appears to be ok with all certs in the chain.
I have imported the root and intermediate certs to each of the gateway/rdsweb server and session host server into the computer cert store just to be on the safe side. This has not helped, I have also run the following command from both windows 7 machines
with no errors on either
certutil -f –urlfetch -verify c:\export.cer
I cant seem to see where this is failing and I am beginning to think there is something wrong with godaddy cert itself somehow.
If I skip rdsweb and just use MSTSC with the gateway server settings then I can login to any machine on the network with no errors so this is only related to launching published apps on the 2012 R2 RDWEB or session host servers.
Any help appreciated

Hi,
1. Please make sure the client PCs have mstsc.exe (6.3.9600) installed.
2. If you are seeing a name mismatch error, you can set the published name via this cmdlet:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
To be clear, the above cmdlet changes the name that shows up next to Remote computer on the prompt you see when launching a RemoteApp. You should have a DNS A record on your internal network pointing to the private ip address of your RDCB server.
Additionally, in RD Gateway Manager, Properties of your RD RAP, Network Resource tab, you should select Allow users to connect to any network resource or if you choose to use RD Gateway Managed group you will need to add all of the appropriate names to the
group.
For example, when launching a RemoteApp you would see something like Remote computer: rdcb.domain.com and Gateway server: gateway.domain.com . Both of these names need to be on your GoDaddy certificate.
Please verify the above and reply back so that we may assist you further if needed. It is possible you have an issue with the revocation check but I would like you to make sure that the above is in place first.
Thanks.
-TP
Thanks for the response.
To be clear I am only seeing a name mismatch and revocation error if I assign a self signed cert to the session host as advised earlier in the thread by "Dharmesh Solanki", if I remove this and assign the 3rd party certificate I then
just get the revocation error , I have already ran the powershell to change the FQDN's but this has not resolved the issue although the RDP connection details now match the external url for RDWEB when looking at one of the remoteapp files. The workspace
ID still shows an internal name though inside this same file.
RD Gateway is already set to connect any resource, when connecting using remote app both names (RDCB/RDGateway) show as being correct and are contained within the same UCC certificate. I also already have a DNS entry for the Connection broker pointing to
the internal ip.
Do you know if the I need the internal name of the session host servers contained within the same UCC certificate seeing as they are different fqdn's than what I am using for external access ? I resigned the UCC certificate and included the internal name
of the session host server to see if this would help but for some reason I am still seeing the revocation error. I will check on a windows 8 client pc this evening to see if this gets any further as the majority of the testing has been done on windows 7 sp1
client pc's
Thanks

Setting performer for embedded workflow

Similar Messages

Maybe you are looking for