Setting/preferences do not get copied over

I have recently copied my library to a external hardrive. I noticed that any preferences and or settings (equalizer etc etc ) I had previously in place do not get copied over when I copied this library back ont another computers iTunes. How can I save all the settings when I'm backing up the library.

Mahsa21,
We are glad that we were able to resolve the international calling plan issue for you.  If you need assistance,please  reach out to us.
thanks,
Tonya D.

Similar Messages

  • Material not getting copied over from Soource to Destination Document

    Hi
    I have created a contract.& when I tried to create a Debit memo Request with reference to the contract I am getting a message that 'Material in Item 10 does not exist'(Msg No-V1 474) &' Item 10 contains errors & cannot be copied'..Though the material that I am trying to copy exists in the sales area of the Debit Memo Request & also it is not blocked for Sales..Master Record for the material also exists in the system.I am getting this error only for a specific Company code/Sales Area.
    Any help to fix this issue is highly appreciated.
    Thanks & Regards
    Prasad

    Hi,
    Check the contract for the incompletion log, the document may not be completed ,
    also check the copying requirement -001 maintained in VTAA.
    Regards
    Senya

  • Manual discounts are not getting copied from Quote to Sales order

    Hello All,
    If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
    copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
    and both quote & Sales order use the same pricing procedure, i am i missing something here?
    I appreciate your help
    thanks
    Chandu

    Hi Chandu,
    Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
    Please share the outcome.
    Regards

  • Header and footer of RTF template not getting carried over to Excel output

    We have Header and Footer in RTF template defined. The output of the report will be in Excel. When we run the report, the header and footer on the report are not getting carried over to excel has header and footer, instead the header and footer are printed as first line on the excel. Also, the RTF template is set to landscape but when the output is generated in excel, it is set to Portrait

    hi..
    chk this presentation...
    http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt#352,3,Why NW 2004s?
    http://www.sap-hefte.de/download/dateien/1090/086_leseprobe.pdf'
    hope this helps...

  • The pricing procedure in Sales order is not getting copied into invoice

    The pricing procedure in Sales order is not getting copied into invoice.
    I have created a document type (pricing procedure),based on the document type ,pricing procedure determination is done.
    So while creating sales order the pricing procedure is determined but when invoice is created the pricing doesnt refelect in the invoice.How to over come this problem

    Hi
    Please check the in OVKK, weather you have maintained correctly or not.Also check in the Billing document type details what is the Document pricing procedure that has been maintained.
    Regards
    Srinath

  • Freight Charges from PO into MIRO is not getting copied.

    Hi Experts,
    Please see the document flow and the issue below.
    PO -> MIRO -> MIGO
    Here, I have entered freight charges manually in PO, when use the reference to create MIRO.. the freight charges are not getting copied from PO into MIRO.
    Why set of configuration I have to perform to solve this?

    Hi,
    Open you condition type in tcode M/06 which you have created for freight and check the settings as below..
    in control data 1-
    Cond. class-A(Discount or surcharge)
    Calculat.type-A(Percentage)
    Cond.category-B(Delivery costs)
    Plus/minus-A(Positive)
    Check the Accrual Key.
    Check whether Accrual key is provided in your pricing procedure for your freight condition.
    In PO select your freight condition from conditions tab and click on detailed tab there provide your freight vendor in the same screen you can view the condition value which then flows to your MIRO when posting delivery charges.
    While doing MIRO for posting delivery charges select planned delivery charges.
    Thanks

  • Configuration of product not getting copied in follow up transaction

    Hello all,
    we are implementing CRM 5.0 . IPC is configured for pricing. After entering products in quotation, I go to configuration tab at item level and configure my product by selecting characteristics. Problem arises when I create a follow up document from quotation. Configuration of individual items that I had done earlier does not get copied in follow up transaction and has to be done again. Is there some setting in IPC/ CRM that will let me copy entire configuration of quotation item?

    Hi Sumedh,
    there is note 899894 with a detailed description how to customize it the correct way! hope it's helpful!
    Regards, Gerhard

  • Purchase Requisition Price "valuation Price" is not getting copied into PO

    Hi MM Expert,
    we are facing a problem with PO price not getting copied from PR, our Client dont want to maintain the Info record as material they are using is generic (general, not specific or special),  so is there any way or configuration setting so the PR price get copied into PO
    Please help me to come out from this issue
    Thanks in advance
    Priya

    Hi,
    Yes there is a way to fix this.
    Please follow the steps below.
    1) SPRO --> MM --> Purchasing --> Authorization Management --> Define Function Authorizations for Buyers
    2) Maintain 01 function authorization or copy it to create a new one
    3) Under General Parameters, Check Adopt PO Price.
    4) If you would like PO to have reference objects as mandatory, uncheck W/o Reference Optional
    5) Go to each buyers ID by SU01 --> Parameter. Enter EFB and enter the 2 codes that you defined in Step 2.
    6) Log out then log back in
    Now with that ID, when you create PR, under valuation, you have a new drop down button asking whether you would like to adopt the price in PO.
    Hope this helps.

  • [svn:fx-trunk] 5819: Fix asdoc issue for event description getting copied over to the class definition .

    Revision: 5819
    Author: [email protected]
    Date: 2009-03-31 13:15:14 -0700 (Tue, 31 Mar 2009)
    Log Message:
    Fix asdoc issue for event description getting copied over to the class definition.
    QE Notes: None.
    Doc Notes: None.
    tests: checkintests, asdoc tests
    Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

    THank you , Nancy. Appreciate the input.
    So instead of this:
    <a class="brand" href="index.html"><img src="../img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    Would it be something like this?:
    <a class="brand" href="index.html"><img src="http://ConsumersAdvocate/img/logo-ca.png"alt="Consumers Advocate Review"> </a>
    And if I do that, is there a way to cope with that locally so that DW can still display the images?
    jeff

  • Ordered Quantity does not get copied to Invoice by  DIAPI

    Hi All,
    I am stuck with an issue in Invoice creation using  DI API by code.The field Ordered Qty (DB Filed INV1.OrderedQty) does not gets copied to Invoice line from delivery lines. But while we add invoice from delivery >Copy To> AR Invoice , it gets copied to Invoice lines. This OrderedQty field is not exposed through DI API, so we cant set that field throgh code. What I do in Invoice creation code is as follows.
    SAPbobsCOM.Documents oINV;
                        oINV = (SAPbobsCOM.Documents)
                            modups.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
                        oINV.CardCode = oDLN.CardCode;
                        for (int i = 0; i < oDLN.Lines.Count; i++)
                            oDLN.Lines.SetCurrentLine(i);
                            string str = oDLN.Lines.ItemCode;
                            if (i != 0)
                                oINV.Lines.Add();
                            //oINV.Lines.ItemCode = oDLN.Lines.ItemCode;
                            //oINV.Lines.Quantity = oDLN.Lines.Quantity;
                            oINV.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
                            oINV.Lines.BaseEntry = oDLN.DocEntry;
                            oINV.Lines.BaseLine = oDLN.Lines.LineNum;
                            taxcode = oDLN.Lines.TaxCode;
    if (DeliveryExpenseCount > 0)
                                for (int i = 0; i < DeliveryExpenseCount; i++)
                                    oDLN.Expenses.SetCurrentLine(i);
                                    if (i != 0)
                                        oINV.Expenses.Add();
                                    //oINV.Expenses.ExpenseCode=i;
                                    oINV.Expenses.ExpenseCode = oDLN.Expenses.ExpenseCode;
                                    oINV.Expenses.LineTotal = oDLN.Expenses.LineTotal;
                                    oINV.Expenses.TaxCode = oDLN.Expenses.TaxCode;
                                    oINV.Expenses.BaseDocEntry = oDLN.DocEntry;
                                    oINV.Expenses.BaseDocLine = oDLN.Expenses.LineNum;
                                    oINV.Expenses.BaseDocType = 15;
    int retVal = oINV.Add();
                        if (retVal != 0)
                            int lErrCode; string sErrCode;
                            modups.oCompany.GetLastError(out lErrCode, out sErrCode);
    Any help will be appreciated..
    Deepesh

    Hi Gordon,
    Thank you for your reply.But it didnt fix the problem.The only change of previous code with this one was oINV.Lines.Add() method is called in the last of the loop.But it wont fix issue. 
    Updated on 20/10/2011
    I have found the issue.The issue is causing if we update the resulting invoice's expense lines.
    If we copy the expense lines from delivery and update any line with an amount it works fine and resulting invoice has "Ordered Qty" in its lines. Code is
    for (int i = 0; i < DeliveryExpenseCount; i++)
                        oDoc.Expenses.SetCurrentLine(i);
                        if (i != 0)
                            oINV.Expenses.Add();
                        string s = oDoc.Expenses.TaxCode;
                        oINV.Expenses.TaxCode = oDoc.Expenses.TaxCode;
                        oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
                        oINV.Expenses.BaseDocLine = oDoc.Expenses.LineNum;
                        oINV.Expenses.BaseDocType = 15;
                        oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal;
                        if (radioButton2.Checked == true && i == 0)
                            oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal + Convert.ToDouble(txtExp.Text);
    But if the delivery has no expense lines or we are adding a new expense line to the invoice while invoice creation from delivery , the resulting invoice does not have "Ordered Qty " in its lines..
    Code is
    if (DeliveryExpenseCount > 0)
                            oINV.Expenses.Add();
                        oINV.Expenses.ExpenseCode = 1;
                        oINV.Expenses.TaxCode = taxcode;
                        oINV.Expenses.LineTotal = Convert.ToDouble(txtExp.Text);
    If I try to add lines
    oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
      oINV.Expenses.BaseDocType = 15;
    to the above code it may show either "Internal error" or " No matching records found".
    Is this a bug in DI API?

  • Validity end date is not getting copied from inquiry to quotation.

    Hi Friends,
    While creating quotation the validity end date is not getting copied from inquiry to quotation.
    What setting needs to be done, pl suggest.
    Regards,
    Hari.

    Sreehari,
    i dont find any logic of having Same validity date for Quotation and Inquiry....
    the simple reason is explained by example: Say you have created Inquiry on 1st november and end date is 15th novembr. Customer comes to you on 14th november and asked for Quotation, and if you refer quotation on that day that means its only applicable for one day, which generally wont be the case.
    There is no option for copying the validity dates from Inquiry to Quotation as per standard. If you want, create routine, place it in copy control.
    Thanks,
    raja

  • Profit Center not getting copied from WBS master data to settlement rule

    Hello,
    I am facing issues during settlement to G/L. From FI side we have set up some validations that the  FI postings shld always carry a Profit Ctr. Now when I am doing settlement to B/S account, the profit ctr from WBS master data gets copied to settlement details and hence on FI posting (Credit line).
    However when I am trying to settle to Expenxse/P&L account this is not happening. The profit Ctr is not getting copied from WBS master data to Settlement details and hence the settlement is not going thru. The profit derived is a dummy profit ctr and not the one on WBS master data.
    I have posted this query on FI forum too but no satisfactory answers.
    Pls let me know, what is the system behaviour....will the prof ctr on WBS master data gets copied on settlement rule details automatically ?
    Sarang

    Which exit do I use in OPSN? any thts or some exit in FI?
    I am on ECC-6.0...
    One thing to mention, the prof ctr is getting copied to settlement rules for Balance sheet account but not for P&L.This is more confusing...
    Sarang

  • Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

    iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
    still not getting this options please help
    Thanks
    Koushik

    13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
    The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
    http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
    Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
    http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
    If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

  • Sub items are not getting copied into excise invoice

    Hi Guru's
    I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
    I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
    When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
    When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
    Kindly suggest me how can I copy subitems into excise invoice from billing document.
    Thanks & Regards.
    Swamy H P

    Hi Lakshmipathi,
    Thank you so much for the response.
    Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
    I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
    But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
    I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
    Thanks & Regards,
    Swamy H P

  • Incoterms are not getting copied at the item level

    HI Gurus,
    I have an sales order where If we change the Incoterms at the header level, its not getting copied at the line Items. Its giving an information mesage stating, Header Business Data does not apply to Item.
    The Incoterms are intially getting copied from Customer master, but later I am not able to change it.
    Please let me know what might be the reasons ? If possible Please let me know some User exits which needs to be checked.
    Thanks,
    Swathi

    Check in VOV8 for your sale order type the following:-
    a)  If both Check Division and Item division are ticked, then system will pop up this message due to the fact that in the said sale order, the item division differs from header division
    b)  The field "ProdAttr.messages" should be blank
    Next go to VOV7, select your item category and execute.  There ensure that the box is ticked for "Business item".  If this is unticked, then system will copy all header data to line item and you cannot change it.
    thanks
    G. Lakshmipathi

Maybe you are looking for