Setting the bullet in list tag

Hi,
I have some problems with the bullet in a html list
(<li> tag). I have a
multi language application and in the chinese font "ms_song"
the bullet
is not displayed correctly. Can I set the bullet via css? Can
I even set
it as Bitmap? Or can I set it to be displayed in a special
font?
TIA

castten,
> I have some problems with the bullet in a html list
(<li> tag). [...]
> Can I set the bullet via css? Can I even set it as
Bitmap?
LI tags in Flash make circular bullets, and nothing more.
But you can
use an IMG tag to load an external image or SWF -- or an
internal image or
SWF as long as the asset has a Linkage ID.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Similar Messages

2K8 - Best practice for setting the DNS server list on a DC/DNS server for an interface

We have been referencing the article
"DNS: DNS servers on <adapter name> should include their own IP addresses on their interface lists of DNS servers"
http://technet.microsoft.com/en-us/library/dd378900%28WS.10%29.aspx but there are some parts that are a bit confusing. In particular is this statement
"The inclusion of its own IP address in the list of DNS servers improves performance and increases availability of DNS servers. However, if the DNS server is also a domain
controller and it points only to itself for name resolution, it can become an island and fail to replicate with other domain controllers. For this reason, use caution when configuring the loopback address on an adapter if the server is also a domain controller.
The loopback address should be configured only as a secondary or tertiary DNS server on a domain controller.”
The paragraph switches from using the term "its own IP address" to "loopback" address. This is confusing becasuse technically they are not the same. Loppback addresses are 127.0.0.1 through 127.255.255.255. The resolution section then
goes on and adds the "loopback address" 127.0.0.1 to the list of DNS servers for each interface.
In the past we always setup DCs to use their own IP address as the primary DNS server, not 127.0.0.1. Based on my experience and reading the article I am under the impression we could use the following setup.
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: 127.0.0.1
I guess the secondary and tertiary addresses could be swapped based on the article. Is there a document that provides clearer guidance on how to setup the DNS server list properly on Windows 2008 R2 DC/DNS servers? I have seen some other discussions
that talk about the pros and cons of using another DC/DNS as the Primary. MS should have clear guidance on this somewhere.

Actually, my suggestion, which seems to be the mostly agreed method, is:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
The tertiary more than likely won't be hit, (besides it being superfluous and the list will reset back to the first one) due to the client side resolver algorithm time out process, as I mentioned earlier. Here's a full explanation on how
it works and why:
This article discusses:
WINS NetBIOS, Browser Service, Disabling NetBIOS, & Direct Hosted SMB (DirectSMB).
The DNS Client Side Resolver algorithm.
If one DC or DNS goes down, does a client logon to another DC?
DNS Forwarders Algorithm and multiple DNS addresses (if you've configured more than one forwarders)
Client side resolution process chart
http://msmvps.com/blogs/acefekay/archive/2009/11/29/dns-wins-netbios-amp-the-client-side-resolver-browser-service-disabling-netbios-direct-hosted-smb-directsmb-if-one-dc-is-down-does-a-client-
logon-to-another-dc-and-dns-forwarders-algorithm.aspx
DNS
Client side resolver service
http://technet.microsoft.com/en-us/library/cc779517.aspx
The DNS Client Service Does Not Revert to Using the First Server in the List in Windows XP
http://support.microsoft.com/kb/320760
Ace Fekay
MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007 & Exchange 2010, Exchange 2010 Enterprise Administrator, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
I agree with this proposed solution as well:
Primary DNS: Locally assigned IP of the DC (i.e. 192.168.1.5)
Secondary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Tertiary DNS: empty
One thing to note, in this configuration the Best Practice Analyzer will throw the error:
The network adapter Local Area Connection 2 does not list the loopback IP address as a DNS server, or it is configured as the first entry.
Even if you add the loopback address as a Tertiary DNS address the error will still appear. The only way I've seen this error eliminated is to add the loopback address as the second entry in DNS, so:
Primary DNS: The assigned IP of another DC (i.e. 192.168.1.6)
Secondary DNS: 127.0.0.1
Tertiary DNS: empty
I'm not comfortable not having the local DC/DNS address listed so I'm going with the solution Ace offers.
Opinion?

How do I set the inbox to list incoming mail in descending order

at present my emails are listing in no set order, its confusing and annoying is there an easy way for me to put this right?

Clicking on any column header will sort on that column. Clicking on the same header a second time will reverse the sort order. Click on DATE to sort by date.

How do I set the Explicit/Clean tags in an MP3 file?

Does anyone know of a utility that will let me set the Explicit and Clean tags/flags in an MP3 file? I have Subler, and that works fine for MPEG4 files & derivatives.
Even a command line utility would be useful.

Rick,
You need to right-click on the FP-1000 and choose Edit This Device. You will then have a checkbox in the middle right portion of the window called Factory Configuration. Un-check it. At this point, every time the FP-1000 is re-powered, it will configure all IO modules with the "User" configuration, rather than the factory default configuration. Note: You must do these steps while the FP-1000 is connected to the computer and powered on.
Regards,
Aaron

How to manage the personal value list of movement types

When selecting the movement type from F4 Help, you can set the personal value list on the F4 Help pop-up screen(i.e. Tr-cd:MB1A).This list seems to depend on users.
Questions are.....
1. If you can manage the setting of this list from other management transactions like SU01, could you tell me which transaction should be used and how to manage it ?
2. If impossible to manage it, the setting information must be stored into some DB table in some way though. Could you tell me the name of the table ?
Thank you in advance for your help.
Best regards

Hello Hideki Kozai,
First of all, include ONLY the mvt types in your (user's) favouite list by pressing "add to favourite button" on F4 help. These mvt types are normally used by users.
If you want to delete from the favourite, then select that particular mvt type and click on "Delete from favourite" button, so that will not apprear in next time.
The other way is suggested by Sumit, remove from the transaction list itself so user will not be able to carry out that mvt type.
Hope this helps.
Regards
Arif Mansuri

How to unmarshall list tags/unbounded elements using jax-ws auto generated classes in weblogic 12c

hi
i have a need wherein i need to create/host jax-ws webservice ( starting from wsdl) and in that service translate the xml using xsl to a different structure and call another webservice hosted to another server ( non-weblogic).
so my approach is as soon as request comes to the service impl, i marshal the object to a xml then apply the required xsl transformation and then unmarshal the transformed xml to the object which can be used to trigger another webservice.
This approach works fine for the xmls without list tags/unbounded elements , however it gives marshal exception whenever the xmls has list/unbounded elements.
i am using jaxb and jax-ws generated class for marshalling and unmarshalling.
so need some help on how to deal in this scenario?
any help is appreciated

hi
i have a need wherein i need to create/host jax-ws webservice ( starting from wsdl) and in that service translate the xml using xsl to a different structure and call another webservice hosted to another server ( non-weblogic).
so my approach is as soon as request comes to the service impl, i marshal the object to a xml then apply the required xsl transformation and then unmarshal the transformed xml to the object which can be used to trigger another webservice.
This approach works fine for the xmls without list tags/unbounded elements , however it gives marshal exception whenever the xmls has list/unbounded elements.
i am using jaxb and jax-ws generated class for marshalling and unmarshalling.
so need some help on how to deal in this scenario?
any help is appreciated

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to set the rows of dataTable using loadBundle tag?

Hi,
Can i set the rows property of a <h:dataTable> using the value from a <f:loadBundle> tag?
I tried the following code
<f:loadBundle basename="com.message.NumberOfRows" var="numRows"/>
I have NumberOfRows.properties file with the following entry
rows=5
The dataTable code
<h:dataTable value="#{mastData.list}" rows="#{numRows.rows}" align="center" var="mastBean">
</h:dataTable>
This code is generating ClassCast Exception.
Please comment on this issue.
Thanks,
Renju

Hi,
Exactly Reymond, See Renju you already using mastData bean for datatable. In that create a bean method something like rows & create a getter/setter method returning int. In getter method try this code as
ResourceBundle bundle = ResourceBundle.getBundle("ur resource bundle");
rows = Integer.parseInt(bundle.getString("rows_to_display"));
return rows.
Hope you can now get some clear idea i guess
Regards,
A.

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order.

I have two albums (RCA Sweeny Todd 2 discs set and RCA Into the Woods 1 disc) where the songs are listed as being on the same album on the list view, but do not group together on the iPod, so the songs can't play consecutively, or in the proper order. The "Apply Sort Field" and "Same album does not work, but ti is only these two RCA albums that do this. All other albums remain intact. Need help with this minor problem. Thanks.

UPDATE: This behavior (to an extent) still happens when "Repeat Album" is off. Instead of an infinite loop, it goes through all the tracks on the album (unsuccessfully) and kicks me out to the Album overview screen. Going back to list of Albums and tapping the Album again brings up "No Content: You can download music from the iTunes Store" but that screen immediately kicks me back to list of Albums.
So I am just even more confused now.

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory

I've had a hard drive crash and put in a new one. However iTunes has or list all of them from my old drive. How do we re-set the directory?

You can re-download the software from Download CS5.5 products
Install and enter your serial number when prompted.
Find your serial number quickly

Itunes 10.6.1.7 I have 2 sets of playlists the first set displays greyed out lists and does not work The second set is fine. How do I get rid of the non working set of playlists?

I have 2 sets of playlists in the sidebar of itunes. I have recently upgraded to 10.6.1.7 but this condition remains the same
The top list refers to greyed out listings and does not function
The list below works fine
How do I get rid of the "false" list?

I think the greyed out playlists must be listed from your device which is set up to mirror your library. Because the device is synced you can't edit content directly on the device. From the top of the left-hand column do you have?
Library > Music, Movies...
Store > iTunes Store, iTunes Match...
Devices > <Your Device> > Music, Movies, and all the other "dummy" lists...
Genius > Genius, Genius Mixes...
Playlists > iTunes DJ, and then all your playlist folders and playlists...
If so then that is perfectly normal when your device is connected, either directly or over wi-fi and you have the lists expanded. Simply click the small triangle to the left of the device name to hide all the playlists.
tt2

Can I set the value of a list binding in my managed bean?

Dear All,
This is just an exercise for me and I just wanted to experiment on the bindings of ADF for me to understand it further.
I wanted to create a custom Model Driven LOV with my data control listed below
Countries
     -CountryId
     -CountryName..but I wanted to display the label similar to this
1 - USA
2 - England
n - France..so I thought of manipulating the select items in a bean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>..and the code similar to this
public class MyBean{
     public List<SelectItem> getCountries(){
          //countryMap points to accessing the iterator binding
          //BindingsHelper is a utility class that sets the value
          for(...){
               SelectItem item = new SelectItem();
               item.setLabel(countryMap.get("CountryId") + " - " + countryMap.get("CountryName"));
               item.setValue(countryMap.get("CountryId"));
               list.add(item);
          //set the item to the first row
          BindingsHelper.setExpressionValue("#{bindings.Countries.inputValue}",
                                 list.get(0).getValue());
          return list;
}...on the last part I wanted to set the value to the first item but I am encountering numberformatexception when setting the list binding.
I know I can do this declaratively also by removing the unselected item but as I have said I am experimenting on the bindings.
Is this not possible?
Thanks.
JDev 11G PS5

Hi ,
I understand that , you want to show select one choice (dropdown) with label (countyid - country name) and value is (countryid).
and these informnation is coming from ADf Model ( may be a VO).
in the UI page you used this list is coming from MyBean
<af:selectOneChoice id="soc1" value="#{bindings.Countries.inputValue}">
<f:selectItems value="#{pageFlowScope.MyBean.countries}" id="si1" valuePassThru="true"/>
</af:selectOneChoice>
so ,
The Managed Bean code should be ,
private List<SelectItem> countries;
///setter method
public void setCountries(List<SelectItem> countries) {
this.countries= countries;
// getter method
public List<SelectItem> getQuoteStatusList() {
quoteStatusList =
selectItemsForIterator("countriesVOIterator",
"countryId", "countryName");
return quoteStatusList;
public static List<SelectItem> selectItemsForIterator(String iteratorName, String valueAttrName, String displayAttrName) {
return selectItemsForIterator(findIterator(iteratorName), valueAttrName, displayAttrName);
public static DCIteratorBinding findIterator(String name) {
DCIteratorBinding iter = getDCBindingContainer().findIteratorBinding(name);
if (iter == null) {
throw new RuntimeException("Iterator '" + name + "' not found");
return iter;
public static List<SelectItem> selectItemsForIterator(DCIteratorBinding iter, String valueAttrName, String displayAttrName) {
List<SelectItem> selectItems = new ArrayList<SelectItem>();
for (Row r : iter.getAllRowsInRange()) {
string labelValue = (String)r.getAttribute(valueAttrName) +"-"+ (String)r.getAttribute(displayAttrName);
selectItems.add(new SelectItem(r.getAttribute(valueAttrName),labelValue ));
return selectItems;
this will give you what you except in the ui
when you try to get the value form that seclecOneChoice value in MyBean what user selects , you can simply get the value of this selectOneChoice.

Set the column name of a table in a list box

is there any code to set the column name of a table in a list box at oracle devloper 6i?
pls help.

I dont want to go for pl/sql . It should work any table.You want Dynamic SQL without using PL/SQL? Tricky. I'm sure there's a possible way using some very complex and convoluted XML functionality of SQL but in reality you are asking for something that isn't natural to SQL queries, especially if you are expecting a dynamic number of columns to be produced for each row of data. SQL expects a table structure, including output formats, to be a defined number of columns with any number of rows, not a defined number of rows with any number of columns.
Perhaps if you explain why you need this sort of functionality then we may be able to offer a better solution.
;)

Issue with setting the tag "Bld_localDestDir" in pre-build VI: Project gets saved to previous localDestDir.

Hey All,
I'm writing a pre-build VI that updates the build destination (and other items, but we're ignoring those for now). This pre-build vi, when run, grabs the Destination Directory from the tag "Bld_localDestDir" and modifies the directory by incrementing a version number.
The issue I'm having is that after the pre-build vi is run, the build continues and puts the executable in the *previous* Destination directory instead of the updated one.
Example:
Destination Dir = c:\temp\version1 --> Choose to build the executable --> Pre-build VI runs and sets Destination Dir to c:\temp\version2 --> Build finishes and says "You can locate the build at C:\temp\version1" --> Check the build properties, destination dir is C:\temp\version2 --> build again --> Pre-build runs and updates destination to version3 --> Build finishes and says "you can locate the build at C:\temp\version2" --> check build properties, destination dir is C:\temp\version3
And so on and so forth. As you can see, the tag setting is working (as witnessed by the Build Properties being updated). However, it looks like the destination directory for the build is determined and set *before* the pre-build VI is run. This is, in my opinion, not intended behavior.
Here's a snippet of a watered-down version of the code, which still has the issue. I've also attached the full VI, saved for LV2010.
The attached VI will grab the version number of the build, append it to the startup vi's title bar, update the build destinations with a new path that has the version number, and then save the project.
As a final note, I'd prefer to not use a post-build VI to rename the directory that the build is placed in.
Solved!
Go to Solution.
Attachments:
Pre-Build Action 2010.vi ‏25 KB

> Leah-L Said:
> We were able to replicate your problem here as well. We are also seeing that the destination directory for the build is determined and set *before* the pre-build VI is run. Just so I am aware, have you found any other documentation concerning Pre-Build VI's?
Cool, thanks for confirming that I'm not crazy. And no, I haven't found any documentation concerning this phenomenon.
> gmart Said:
> it potentially processes the information and so simply updating values may not have the desired effect
Good to know. I think this should be in the documentation somewhere though, perhaps in the detailed help for the Get/Set Tag invoke nodes for a Build Spec reference.
To fix the issue, I've just made my own "Build Executable" vi that sets the tags before the build is started. It uses the same VI that I attached earlier (confirming that the VI works). Instead of starting the build from the project window and having a pre-build vi execute, I run this stand-alone VI and it builds the app.

Setting the bullet in list tag

Similar Messages

Maybe you are looking for