Setting the doc.type to use for t.code ABUMN (transfer asset ...)
Hi All,
Could anyone show me where to set, in customizing, the doc.type to use for t.code ABUMN (transfer asset within company code)?
Thanks
Umberto Gandalf
AO71 Document type for posting deprec.
AO72 Specify posting procedure
AO73 Define Transaction Type
AO73_INV Define Transaction Type
AO74 Define Transaction Type
AO75 Define Transaction Type
AO76 Define Transaction Type
AO77 Define Transaction Type
AO78 Define Transaction Type
AO79 Define Transaction Type
AO80 Define Transaction Type
spro- FA - AA - transactions - transfers
Rgds.
Similar Messages
-
Drop Down for Selecting the doc type while uploading?
Hi all,
Is it possible to create some document type in KM so that we can select the doc type and upload the file to specific folder.
What I mean from Doc type is like Doc for Meetings, Doc for activity report.
Is it possible using standard KM features? Urgent help needed pls reply.
Pls send the document regarding this to [email protected]Hi Karan,
I'm not sure if I have understood your issue correctly, but let me try:
1. You want to upload documents to KM
2. Uploading them, you want to categorize them in some way, so that they can be identified as docs for meetings, docs for unit XYZ, etc..
3. After upload, you want each doc to end up in a folder according to its category
If this is what you want, try the following:
1. Create a custom resource property called "category" or something similiar.
2. You may define your possible values for that property. This makes it a drop down box containing the possible values in property view. (You can see property view when uploadinga document)
3. Mark the property as searchable
4. Create a taxonomy using TREX searching your repository for the given values of your custom property
Now you can upload documents, fill the custom property, and some minutes later TREX will create a link to the document in the specified 'category folder'.
If you need some more detailed assistance, please come back.
HTH,
Carsten -
Cfhttp and setting the content-type for a request
Hi,
I am trying to set the content-type for a cfhttp request like this (on coldfusion 9):
<cfhttp redirect="no" method="get" timeout="120" url="http://10.0.0.1/test2.cfm">
<cfhttpparam type="HEADER" name="Content-Type" value="application/json; charset=utf-8">
</cfhttp>
// coding on test2.cfm:
<cfset x = GetHttpRequestData()>
<cfdump var=#x#>
// Output on test2.cfm
content
[empty string]
headers
struct
Accept-Encoding
deflate, gzip, x-gzip, compress, x-compress
Connection
TE
Host
10.0.0.1:80
Proxy-Connection
close
TE
trailers, deflate, gzip, compress
User-Agent
ColdFusion
X-REWRITE-URL
http://10.0.0.1:80/test2.cfm
method
GET
protocol
HTTP/1.1
As you can see no content-type is send through. I also tried the sniffer.exe:
GET http://10.0.0.1:80/test2.cfm HTTP/1.1
Host: 127.0.0.1
Proxy-Connection: close
Connection: TE
TE: trailers, deflate, gzip, compress
User-Agent: ColdFusion
Accept-Encoding: deflate, gzip, x-gzip, compress, x-compress
Here you can also see that no content-type was passed through. The sniffer should report back
GET http://10.0.0.1:80/test2.cfm HTTP/1.1
Host: 127.0.0.1
Proxy-Connection: close
Connection: TE
TE: trailers, deflate, gzip, compress
User-Agent: ColdFusion
Accept-Encoding: deflate, gzip, x-gzip, compress, x-compress
Content-Type: application/json; charset=utf-8
But is does not, what do i need todo to set the content-type in a cfhttp request.
Kind regards,
Nebu12Robots - are you sure about your statement that GET method requests cannot have Content-Type headers? I don't think that that is correct. I've always thought that it was valid (maybe unusual, but ...) and this W3C link weems to agree, especially in the context of its comment about what Content-Type means in a HEAD method request: http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html
The big problem with trying to get around the CFHTTP limitation by using the CGI scope is that the dash is illegal in a CF varname.
There is a custom tag called CFHTTP5 that getsaround a lot of the CFHTTP limitations, including cookie preservation across multiple requests. I haven't used it for a long time (CF5), but it is still actively developed. Costs $50 - http://www.cftagstore.com/tags/cfxhttp5.cfm
-reed -
Using Forms that don't set the content type charset
The Servlet API 2.3 has a new method, request.setCharacterEncoding(), to
deal with the fact that almost no browsers set the content type. When I call
this method passing "Shift_JIS" using weblogic 6.1, it works fine when the
content type is not set by the browser. That is, after calling
setCharacterEncoding when I call request.getParameter("testparam") I get the
correct translated value. However, if the content type is
"application/x-www-form-urlencoded; charset=Shift_JIS" and I call
request.setCharacterEncoding("Shift_JIS"), getParameter("testparam") returns
null.
Can anyone shed some light on this?
It looks like I'll have to not set the character encoding if it is already
set. That, of course, opens the possibility that the character set used for
translation is different than was used in the form.
Russ Cole
[email protected]
It might not be the new 3G network. Though I've heard the major metropolitan cities can have slower responses due to congestion.
Have you upgraded to the new operating system? Have you tried resetting your phone? You can do that by holding the "Home" and "Power" buttons down together, through the shut down screen and until the apple appears on the screen.
You might also try this:
http://www.roughlydrafted.com/2010/07/07/how-to-speed-up-your-iphone-3g-running- ios4/
It's called a cold reboot.
Sharon -
I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both
iForgot.com
-
Inserting a node in XML and retaining the doc type
Hi All,
I want to insert one new node in an XML. Using the following code I can do that. But the problem is if the XML has doc type declaration then its giving me problem. After inserting the node the transformer is removing my doc type declaration from the XML. I have to retain the doc type definition (including entity declaration) as it is in the original XML file.
The following is the code that I'm using.
Document vDoc = null;
try {
// Contruct the DOM document
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
vDoc = builder.newDocument();
Node vFormNode = vDoc.createElement("Form");
vDoc.appendChild(vFormNode);
// Convert into a String the DOM document
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer = tFactory.newTransformer();
DOMSource source = new DOMSource(vDoc);
StringWriter sw = new StringWriter();
StreamResult result = new StreamResult(sw);
transformer.transform(source, result);
catch (Exception e) {
System.out.println("Error: " + e.getMessage());
}The doc type def. in the original file is some thing like this.
<!DOCTYPE article SYSTEM "someurl/TFJA.dtd"[
<!ENTITY T0001 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_T0001.gif" NDATA GIF>
<!ENTITY F0001 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_F0001g.gif" NDATA GIF>
<!ENTITY F0002 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_F0002g.jpg" NDATA JPEG>
]>I know that I can set up the doc type definition in the new XML using the following properties of the transformer.
transformer.setOutputProperty( OutputKeys.DOCTYPE_SYSTEM,"article" );
transformer.setOutputProperty( OutputKeys.DOCTYPE_PUBLIC,"my DTD def");
I cannot hard code the DTD def. as it can vary from one XML to another. Using doc.getDocType() I can get the doctype of the original XML. But is it is not returning the complete def. including entities declaration. Its giving me "someurl/TFJA.dtd".
Is there any way to retain the complete doc type in the original XML file? I don't have much experience in XML and this issue is eating my head.. Also do I have to modify the DTD to accommodate the new tags added in order to make it a valid XML?
Any help and sample code would be highly appreciated.Hi,
I also had similar requirement and when searching i came across this post. Later i found the solution for this. Instead of hardcoding the doctype you can get it from Document as follows..Snippet from the code i used..
DocumentType doctype = document.getDoctype();
if(doctype != null) {
String id = doctype.getSystemId();
if(id == null || id.length() == 0)
return;
transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, id);
id = doctype.getPublicId();
if(id == null || id.length() == 0)
return;
transformer.setOutputProperty(OutputKeys.DOCTYPE_PUBLIC, id);
Hope this helps.
Regards,
Deepak -
How to set up set which NIC card to use for multicast?..
I just downloaded Rolling Patch 1 for WLS6.0SP2.
While reading the README file it says
" ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
Can anyone tell me how to set this?. on my WebApplication server it has two NIC
cards and I want to use the NICcard which is being used to talk to internal network
for multicast messages.
One more thing,
Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
place where I enter ISSUE number and should get the detailed description of bug/issue
etc..
Thanks for helping,
Nilesh
Thanks Kumar, I'll try this.
Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
used to talk to AdminServer?.
The other problem I am facing is when I restart the AdminServer in recovery mode
it's not finding my WebApp servers, because my webapp servers are on public network
and my admin (management) server is on private network.
please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
, for more details about my problem.
Thanks,
Nilesh
Kumar Allamraju <[email protected]> wrote:
><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
><html>
>You should be able to do it via console in 6.1
><br>Not sure if it was added in 6.0
><p>For 6.0 you can set this via command line
><br>java -Dweblogic.interfaceAddress=<addr>
><p>You need 6.0 SP2 RP1
><p>--
><br>Kumar
><p>Nilesh Shah wrote:
><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
><br>While reading the README file it says
><br>" ISSUE 42518: Provided a way to set which NIC card to use for multicast
>traffic
><br>"..
><p>Can anyone tell me how to set this?. on my WebApplication server it
>has two NIC
><br>cards and I want to use the NICcard which is being used to talk to
>internal network
><br>for multicast messages.
><p>One more thing,
><p>Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
>am
>looking
><br>place where I enter ISSUE number and should get the detailed description
>of bug/issue
><br>etc..
><p>Thanks for helping,
><p>Nilesh</blockquote>
></html>
>
-
What cast type are used for?
In the example attached to this question is a simple VI application that cast, using type cast of LabVIEW, one value to different other type. My understanding of type cast, in C, C++ and to my best knowledge, was an implicit adaptation of a numerical value in a specific format to an other format. The value should remain the same. Unless the type in which the value is assigned is not enough large or adapted to contain such a number ex:
I8 = 500;
U32 = -1;
But in my example all the assigned indicator are large enough.
I have the same problem in LabVIEW 5.1.1 and 6.1
If someone could only tell me what it is used for?
Best regards,
Nitrof
Attachments:
Type_cast.vi 26 KBThe type cast function is really helpful for typecasting "unusual" data to a more convienient data format. It can also be used to coerce data, like in your example, but coercion is usually not always a good thing because it can cause bad values.
There are lots of good examples of typecasting.
For example, I use the typecast function to change refnums to unsigned 32 integers (U32), just so I can pass the refnums between VI's easier.
Another VERY common typecast is if you want to display the ASCII value of a character. Run the string character "A" into a typecast, and set the output type as a Unsigned 8 bit number (U8), and you will see 0x41. Take a look at my example VI's to see what I mean.
David
Attachments:
Type_cast_Example5.vi 16 KB
Type_cast_Example6.vi 18 KB -
How do I set the content type ?
Hi
I have to upload a file from my Java Application to a remote servlet.
I have used the HTTPConnection class to connect to the remote servlet and made it call the POST method explicitly.
How do I set the content type of the file I am uploading from my Java apllication?
I tried to change the content type in the doPost method. by giving
req.setContentType("multipart/form-data"); in the doPost.
It still doesnt work..
Is there any way to set the content type in the Java application?
Thanks in advanceWhat class is your req variable? If your using a HttpServletRequest, then there is no method req.setContentType("");
In the HttpServletResponse this is for telling the web browser or receving medium what kind of mime type to expect.
And what package is the HttpConnection class from?
I think more precise info is required before this question can be answered. -
MN05: setting the number of printer copies for the whole range of vendors
Hi all,
by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
Thanks
GandalfUnfortunately,
setting for document type, it doesn't work for all range of vendors.
Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
you do for document type and then it will cover all range of vendors.
If you want prints for a specific vendor then set condition recrod for that vendor only.
regards -
What are type defs used for?
I am learning about type defs and wanted to ping the community to get a feel for what expanse of things they are useful for. Any and all comments are welcome.
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.I found this (from LV Help) enlightening as to the differences between typedefs and strict typedefs:
Type Definitions and Strict Type Definitions
Use type definitions and strict type definitions to link all the instances of a custom control or indicator to a saved custom control or indicator file. You can make changes to all instances of the custom control or indicator by editing only the saved custom control or indicator file, which is valuable if you use the same custom control or indicator in several VIs.
Type Definitions
Type definitions identify the correct data type for each instance of a custom control or indicator. When the data type of a type definition changes, all instances of the type definition automatically update. In other words, the data type of the instances of the type definition change in each VI where the type definition is used. However, because type definitions identify only the data type, only the values that are part of the data type update. For example, on numeric controls, the data range is not part of the data type. Therefore, type definitions for numeric controls do not define the data range for the instances of the type definitions. Also, because the item names in ring controls do not define the data type, changes to ring control item names in a type definition do not change the item names in instances of the type definition. However, if you change the item names in the type definition for an enumerated type control, the instances update because the item names are part of the data type. An instance of a type definition can have its own unique label, description, default value, size, color, or style of control or indicator, such as a knob instead of a slide.
If you change the data type in a type definition, LabVIEW converts the old default value in instances of the type definition to the new data type, if possible. LabVIEW cannot preserve the instance default value if the data type changes to an incompatible type, such as replacing a numeric control or indicator with a string control or indicator. When the data type of a type definition changes to a data type incompatible with the previous type definition, LabVIEW sets the default value of instances to the default value for the new data type. For example, if you change a type definition from a numeric to a string type, LabVIEW replaces any default values associated with the old numeric data type with empty strings.
Strict Type Definitions
A strict type definition forces everything about an instance to be identical to the strict type definition, except the label, description, and default value. As with type definitions, the data type of a strict type definition remains the same everywhere you use the strict type definition. Strict type definitions also define other values, such as range checking on numeric controls and the item names in ring controls. The only VI Server properties available for strict type definitions are those that affect the appearance of the control or indicator, such as Visible, Disabled, Key Focus, Blinking, Position, and Bounds.
You cannot prevent an instance of a strict type definition from automatically updating unless you remove the link between the instance and the strict type definition.
LabVIEW 8.0.1; WinDoze XP
aut viam inveniam aut faciam -
Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
JukkaHi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights. -
How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application -
What can I do? I've forgotten my password and dont remember the answers to my sercurity questions, and no longer have access to the email account i used for backup. How do I get my icloud password reset? Please help. Thanks in advance.
Please see Kappy's User Tip here:
https://discussions.apple.com/docs/DOC-4551 -
What are the tables to be used for these reports
hello everybody,
i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1. Report for Sales Orders due for delivery.
2. Revenue Reports based on Order Types.
3. Report for list of Pending Purchase Orders, Cancel Purchase orders.Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps
Maybe you are looking for
-
Initial AP rollout on 5508 HA-SKU and N+1 redundancy
Hi Board, I have a 7.4 WLC pair - one as primary and one as secondary WLC. They are not doing AP-SSO. I'm aware of all the design and configuration guides, but there are still some questions. Primary WLC: 50 AP count / Secondary WLC: 500 AP count (du
-
Watching flash animations on mac mini
to anyone reading this, please bear in mind my computer literacy is kindergarten level. i've just bought a mac mini. i transferred some flash animations that i did on my old computer by using a jump drive. they wouldn't play, because it didn't have a
-
How do you import raw motion video projects into Final Cut Pro X
How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.
-
Movie genres not working in UK
Since updating to 7.0.2 the movie genres option doesn't seem to work. How do I select movies to rent or buy if I can't browse the genres?
-
Ok either Im over looking it or it does'nt exist but where is t he crop tool on the toolbar?