Setting the "Email" Button to only send specific pages in a PDF

Hey everyone, couldn't find this question on the board, so figured I'd give it a shot.
I have a PDF I'm making w/a coverpage, what I'm trying to find out is if I can set the "email PDF" button to specifically send the PDF without the coverpage included (so...if the cover page is page 1 in a 5 page document, the pdf emailed would only include pages 2-5).
Not sure if this functionality is possible, but I figured I'd reach out to the experts - thanks in advance!

Adobe Reader is simply for reading/printing PDF's (and possibly a few other things depending on the PDF). You can find more functionality in the full version of Adobe Acrobat. In this case, with Acrobat you can simply remove the first page then email the rest.

Similar Messages

How do I set the delete button to automatically send email to my deleted folder?

I was trying to empty my deleted mail folder, and accidentally deleted the entire folder. No worries. I created a new subfolder. But, now when I select the <delete> button, nothing happens. How do I route emails to be automatically stored in my deleted folder when I select the <delete> button?

the most bottom part

How do I set the Submit button to send the information directly to a specific email address?

How do I set the Submit button to send the information directly to a specific outside email address? It isn't clear to me where or how it says that you can do this.

Is this for a web form or a PDF? If PDF, you would have to use Acrobat to edit the form and replace the submit button action with either a "Submit a form" action using a mailto type URL, or use the doc.submitForm statement to do the same.

When I try to forward a PDF file by using the email button on the toolbar, it won't send.

I cannot always forward a PDF using the email button on the toolbar. For example, I get a report forwarded to me as a link. When I open the link, the document opens as a PDF. I use the email button on the toolbar to forward the document as an attachment. Outlook pops up as a new message with the attachment. I finish writing my email and hit the "send" button and I get an error saying the doucment couldn't be sent. If I close the email and save it as a draft, I can open the draft copy and it will send. Is there someway to fix this so I can eliminate these extra steps? This has happened on a computer with Adobe Reader as well as a computer with Adobe Acrobate 9 Standard.

teresah7680 wrote:
the doucment couldn't be sent.
Is that the exact message that Outlooks gives you?
Anyway, why don't you just forward the original link to the document, instead of the PDF itself?

HT201363 I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have

I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have?

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Validate.nullTest working only with the EMAIL button

Hello,
This piece of code is working just great when submiting a form by
email.
TextField1.validate.nullTest = "error"; (highlighting the empty fields when pushing the EMAIL button)
On the print button it doesn't have any effect. How can I highlight
the required fields when clicking the print button the same easy way
as with the email button? (I have other highlighting scripts but I want to use the exact same method as used on EMAIL)
Your input is really appreciated! And any explanations for this stupid behavior?

To make this functionality you can use two buttons trick:
First button Print, onClick event should has this script: realPrintButton.execEvent("click").
Second button is invisble Print button.
So, when you click on your first button print validation is appear and real print will be executed.

Drop down that fills a second field and sets the email recipient

(note: this was incorrecty posted in the Acro forum and I was informed to move it here)
Apologies for this simple, newbie question but I am stuck. I have worked on this for a few hours, and just cannot get it to work.
The basics: I want to get a name from a drop down, have it display in another field then set the submit button to email to that recipient.
Acrobat Pro X
LCD 9.0.0.2
Win 7
I have done this with one recipient before where the Submit button has all the info already entered, but this time I want to allow the user to choose from one recipient in a list and route the completed form to that person. I have tried all sorts of variations on Java examples in multiple forums and while everyone else seems to be able to do this, I have been unsuccessful. I cannot even get the text field to display the email based on the name in the drop down, much less the addressing part. I have tried a custom calculate script, case script and other items to no avail.
The 3 elements........
1) Drop down menu with names, let's just say there are two names - "John Doe (Eastern)" and "Jane Smith (Western)". The field is named "DistMgr".
2) Text Field that displays the corresponding email for the name in DistMgr. Pretty much only used for display to confirm the address visually. This field is named "Email".
3) Attach & Email button to send the form to the recipient chosen. Subject is always the same, lets just say it says "New Form". The button is named "Submit".
What I want to do is select the name from DistMgr, have it populate Email (for display in the form) and automatically change the Submit button to allow the user attach the fom, insert the appropriate email address & the standard subject and invoke a standard email client with just the click of the Submit button.
Any help would be appreciated and even links to locations where this very basic question has already been answered would work.
Thank you.
Joe Rowan

Are you using Adobe LiveCycle Designer? If so when you have the form open in designer, click on the dropdowns you will see in the code behind that dropdown where it calls a variable which is called myScriptObject. Behind the drop-down list called "teams" it calls this script.
Here is what is in the scriptobject:
var epl = "Chelsea,Manchester United,Arsenal,Tottenham";
var liga = "Barcelona,Real Madrid,Valencia,Mallorca";
var seriea = "Roma,Inter Milan,AC Milan,Sampdoria";
var eplArray = new Array();
eplArray = epl.split(",");
var ligaArray = new Array();
ligaArray = liga.split(",");
var serieaArray = new Array();
serieaArray = seriea.split(",");
function loadData(dropdownField) {
     if (!(form1.page1.subform1.league.isNull)) {
          switch (form1.page1.subform1.league.rawValue) {
               case "English Premier League":
                    for (var i=0; i < eplArray.length; i++) {
                         dropdownField.addItem(eplArray[i]);
                    break;
               case "Spanish Liga":
                    for (var i=0; i < ligaArray.length; i++) {
                         dropdownField.addItem(ligaArray[i]);
                    break;
               case "Italian Serie A":
                    for (var i=0; i < serieaArray.length; i++) {
                         dropdownField.addItem(serieaArray[i]);
                    break;
               default:
                    break;
Deborah

How can I set up email so I can send iPhoto without using a .mac account?

Hello!
I am trying to send an iPhoto via email. Since I do not want to set up the .mac account yet, how do I correctly set the email send and receive perimeters? POP?
I want to use my yahoo email.
Thanks!
Powerbook G4 Mac OS X (10.4.4)

Thanks again Allan.
I figured out the AOL iChat LATE last night.
I finally got my email up and running. I called Cox to get the correct POP and SMTP addresses. It still wasn't sending, I spoke with Apple who confirmed I had all my perimeters set up correctly. Back to Cox. After a couple frustrating hours, the only reason the email was not sending was that Cox did not support the SSL that I had checked off.
The great thing about Mac (which I kept overlooking) was when I was trying to send my email, it was giving me hints for example the error message smtp.etc is not connecting with the SSL. I could have saved myself some trouble by unchecking that and testing it earlier.

How can I edit the default settings for the Email button?

I saw this question posted for February and as yet still unanswered. So I am now asking it again.
I do not want to use my .mac account email address in my website. I want it linked to my domain. I have found no specific instructions for changing the default. Also my drag down "Link to" menu in the Inspector does not work.
Thanks........
eMac Mac OS X (10.3.9)
eMac Mac OS X (10.3.9)

While you can't edit the default email address in iWeb, there is a workaround which may suit.
In Safari, locate a web page which has iWeb's email button on it (if you've already published a site, one of your own web pages is ideal). Control-click on the button and select 'Add Image to iPhoto Library'. Drag this image from the Media Browser to your iWeb page, select the image, and use the Link inspector to enable it as a hyperlink linking to 'An Email Message'. Enter whatever email address you like in the To box and a Subject for the message if you wish.
To make things easier, create an iWeb library in iPhoto and add the email button to it for handy access.
[ Visit here for iWeb Tips, Tricks and Hacks ]

Does the email button word from a PDF generated report from 9ias?

Has anyone been able to get the email button from a PDF report generated from 9ias? I try to email the report as an attachment, and the file doesn't attach, and I dont receive anything. If I email a link, it just sends a link that directs you to the report server webpage, but you can't see the file.
Besides saving the file to the local file system and attaching the file to an email, has anyone been able to get this button to work?

Hi Jim,
What command are you using in your link or button?
For sending report output by email you must use:
http://machine:port/reports/rwservlet?report=...+server=...+destype=mail+desname=<email_address>desformat=<your_desired_format>from=...
You can also use CC, BCC, REPLYTO and SUBJECT. See Publishing Reports manual for more information:
http://download.oracle.com/docs/html/A92102_01/pbr_cla.htm#658500
For more advanced emailing options you can also use distribution. See Publishing Reports:
http://download.oracle.com/docs/html/A92102_01/pbr_dist.htm#1005563
Navneet.

Why does my iPad hang when writing an email? When I'm done with the email, I can't send it out and have to re-boot the iPad.

Why does my iPad hang when writing an email? When I'm done with the email, I can't send it out and have to re-boot the iPad. This happens if the time to compose email exceeds 10 to 15 minutes.

Shut down all programs that are running in the background.
1. Double-click the Home button to see Apps in background
2. Hold the Apps down for a second or two until you see the minus sign
3. Tap the minus sign to close program
4. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo
Suggest you perform Step 1 to 3 at the end of every day.

How do I add the email button to the toolbar when I open PDF files in Mozilla ver. 19?

I just updated to Mozilla ver 19 and now when I open a PDF file in Mozilla the email button is no longer on the toolbar how do I add it?

hello, firefox 19 has introduced its own integrated pdf viewer - if you want to switch back to the plugin you've used before to view pdfs just go to firefox options > applications & define the default action for the ''portable document format (pdf)''.
[[View PDF files in Firefox without downloading them]]

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

"The reply" as in the Rescue email to reset your Security Questions? If so, then you will have to contact iTunes Support directly to get them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

I have set the presence to screen only but the checkbox still prints adobe livecycle

I have set the presence to screen only but the checkbox still prints. I am using adobe LiveCycle design 9 and it is a dynamic form
This check box is part of an action, where when clicked, it copy's the data from one row and puts it in another. It is also in a row that can be added and removed.
But basically I want the check box to appear on the screen but not print (including when the form is converted to a PDF when its completed)

Intel-based Macs: Resetting the System Management Controller (SMC)
Power
The computer sleeps or shuts down unexpectedly.

How do you set the menu button for a playlist?

I have a "Play All" playlist that I want to return to the main menu (when the menu button on a DVD remote is pressed). Right now, it's going to one of my sub menus. I can't figure out why this is happening. Any help would be greatly appreciated.

Thanks for the responses.
My "Play All" playlist is not a button on a menu. It is actually the "First Play" of my DVD. I want the user to be able to hit the menu on their remote and then go to the main menu. What's happening is the menu button is going to a sub menu. I find it frustrating that you cannot set the remote button options for a playlist. If this can't be done, is there at least a way to set my main menu screen as my "top menu"? I don't want to set all of my timelines to the main menu. If I were to set it that way, all of the clips from the sub menus would go back to the main menu (when the menu remote button is pressed).

Setting the "Email" Button to only send specific pages in a PDF

Similar Messages

Maybe you are looking for