Setting the plan table

any way to do set the explain plan table sqlDev version 1.2
Thanks

Again, what is the problem, and why running @?/rdbms/admin/utlplan would not suffice? If you don't have access to the source on rdbms server, there is still a million ways to do it. You can copy plan table as create as select from plan_table@dblink, or find plan table definition on the web and run it in sql worksheet.

Similar Messages

Default setting for Planning Table

Dear gurus,
How to default user setting in planning table?
( Not at individual user level) how it is possible?
Pl. reply.
Srini

Hi Srini,
you can customize some settings.
Define scheduling parameters for planned orders - OPU5
Maintain Entry Parameters - Production\Repetitive Manufacturing\Planning\Planning Table\Maintain Entry Parameters
Maintain Row Selection - Production\Repetitive Manufacturing\Planning\Planning Table\Maintain Row Selection
For the capacity planning in the planning table you can maintain different profiles.
Kind regards,
Frank

How to set the column table so it can not be moved !

how to set the column table so it can not be moved !

m_table.getTableHeader().setReorderingAllowed(false);
m_table.getTableHeader().setResizingAllowed(false);

IW37n using the Planning Table with Overall Profile for Wrk Cnter Hierarchy

Dear Experts,
We are using IW37n to sort and filter our orders. From there we make a selection and then GOTO the planning table to use for dispatch. We copied the overall Profle to allow us to define the Evaluation Profile to allow for a Work Center Hierarchy and Plant to be defined.
If I run CM25 using the overall profile the Work Center Hierarchy works fine. If I use IW37n, enter the same overall profile it does not execute the CM25. Is there something else we should to get the CM25 to run?
Regards,
Roseanne

Can I take this out a little further. I verified with two orders that indeed both are being shown coming through IW37n or CM25. I've determined that the profile is being called. The layout shown in Chart 2 is correct. It's chart 1 that is not showing the work center hierarchy correct from IW37n, it only shows the top node of the work center. We have two scenario, one work center is defined with the employee linked to HRMS. The lower node is a work center used to schedule too. The other work center structure is the employees are defined as work centers. We build the order to the top node and then use the hierarchy to schedule to each individual work center. In both cases using IW37n, the lower level work centers are not shown in chart 1.
If running CM25 independent it works fine.
Regards,
Roseanne

How can I set the af:table cell spacing ????

Hi,
I am using the af:table component and I need absolutely to set the cell spacing. I am afraid that it couldn't be possible.
If you have any idea please dont hesitate.
Many thanks

Please lell me how can i create a TableModel , means
we have to create a seperate class or I have to do
like this---------------
private TableModel myData;
private JTable oTable = new JTable(myData);
and call this method on table object
int iRows = oTable.getRowCount();
oTable.isCellEditable(iRows,2);\Something like this:
public class MyTableModel extends DefaultTableModel {
public boolean isCellEditable(int row, int col) {
return false;
}Or even better, extend AbstractTableModel. AbstractTableModel already overrides isCellEditable to return false.
public class MyTableModel extends AbstractTableModel {
}Graeme

5700 - Email - Send - Set the code table

I installed the Psiloc Crystal Japanese
But when i send message to a my friend
she cannot see my messages because her
phone (or her Mobile Operator: Japana AU)
Wants emails only with JIS but my nokia send only
as unicode.
Can I do something?
Is it a Nokia bug?
Is it a Pslic problem?
my old nokia 6234 I had in the email menu the possibility to change the code table (ISO or Unicode)
If i wrote to Nokia the site forward my mail to Nokia Italy So no one understand nothing of techinical problem
(all question i did they say: go to the assistance for change firmware, but Nokia never updated the firmware of 5700)

why nokia never answer?

Clear the History Data Automatically in Production Planning Table MF50

Dear Friends,
I have the problem to set the Production Planning Table (Txn MF50) to
clear the history data automatically. Currently, all the history data
in the planning table has to be cleared manually.
Appreciate your help.
Rgds
Zahari Yusof

instead of just removing the whole history like private browsing do, i just want to remove browsing/download history and form&search. i didn't want to remove cookies and active logins, heheh. thank you

IMG setting for REM Planning Table

Hi Gurus,
Can any one throw light on following IMG settings-
Path -
IMG --> Production --> REM --> Planning --> Planning table --> Maintain Row selection --> Reciepts Other version
Relevance of "Other version - in IMG setting for visible rows in planning table".
Planning table output does not change with check or uncheck of version.
Which check or unchecking, planning table is considering all the production versions of the materials maintained.
What is purpose of having a check or uncheck, if system is giving the same result.
Regards,
Srini

Hi Srini,
We create production version to OPTIMIZE the production. We mention the routing and the BOM in the production version. Actually speaking, in the REM scenario we don't even need a planned order. Production order is absolutely not needed. So in the planning table, it shows the production data for all the versions that you have created, irrespective of whether or not you check the indicator. During planning run, the system will take the first production version by default. So in the planning table you can see the optimum production and you can do leveling also, possible through the row selection option in IMG. Hope this sheds a light on your concern.
Regards,
Sreekant.

Configuring the graphical planning table (GPT)

Hi folks,
Can anyone help me out here, feeling a bit dumb
I am trying to configure the field layout for the orders pool on the GPT. I have identified my overall profile (SAPSFCG001), the planning table profile (SAPSFCL001), the layout ID (SAPSFCLA05) and the layout key (SAPSFCAS03)
When I edit the layout key SAPSFCAS03, I want to add the operation short text, I have found it in the list and added it to the layout key... all good so far.
When I run CM25 with my overall profile... for some reason the headers are correct but the actual column data is not ... i.e. it hasn't pulled through the operation short text for any orders and to make matters worse, the column headers and the actual data are now out of sync... so under the operation short text I have the work centre name ... what the ?!?!?!
clearly I am missing something here.
Any help would be greatly appreciated.... thanks

Dear ,
Please check in CY38-Lay out key -SAPSFCAS03-Hit change pencil -Please do the following :
1.Remove the high lighte mark from existing Operation Short text column and select the Standatd one ( Operation Short Text line -It will be in down botton -Operation row started with AFVGD -Field lenght 97 ) .
Accordingly mark those field which you want to bring into CM25 taking refernce of Standrad one .
2.Then you hit the Sequence and heading text .
3.Now select the high ligthed row and hit the Select icon ( ink-nip mark ) to move as per your sequence .
4.Finally re-chek with preview and SAVE.
Hope this clarifies
Regards
JH

Activating capacity display in Planning table of MF50.

Hi Experts,
I intend to use the MF50 for Planning my FG. My scenario is a normal PP PI and not REM. I am using production version to distinguish the work centre (defined as production place). I want to display the Capacity of the Workcentre on the MF50 screen along with the Planning table. I am able to see the Prod Versions, planned ordes / requirements on the screen. My only concern is I want to display the capacity on the same screen, I found that the Activate graphic and set graphic settings in the Capacity reqt planning have got greyed out.
I request the experts to guide me in this case.
Regards,
A S K

Hi
Check the following settings :
1. In production Version whether work center is maintained as production line or not ? .Also make sure that same work center ins maintained in Routing or not .
2. In MF50 Initial selection screen Scheduling TAB check whether 'capacity requirement ' along with detailed planning is activated or not.It must be activated.
Regards,
Velmurugan S

Error message in capacity planning table

Hi,
I am using REM planning table.I enter the planning table by giving the selection criteria of Plant and production line.
System is giving following error message,
the error message and dignosis of the error message is given here.
'No prod. dates for material MTI_FERT011, version 0001, production line 2279'
Message no. REMPT315
Diagnosis
The planned order has no production dates for the combination of material, production version and production line you specified.
This may be as a result of the following, for example:
The planned order was scheduled but not using the production line you selected. (The production line is determined by the production version you entered in a planned order.)
Procedure
One possibility of finding out what is causing the problem is:
To access the planned order from the detailed dialog box in the table via "Change" and reschedule the planned order. Check the scheduling log by choosing "Goto --> Scheduling log". More information is displayed in the log's warning or error messages.
But which master data to be corrected is not known.
Experts please guide me.
Regards,
Ravindra

Hello,
I had the same error while working with the REM planning table, despite the consistency of the data.
Another cause that can lead to the error message REMPT315 is that in the production version detailed screen, "Planning data" table you have entered the routing next to rate-based planning. You must enter the routing (number of the group and the group counter) on the line detailed planning.
After that, choose check again and try to introduce new quantities in the planning table. It worked for me!
Irina

Unable to drop or truncate a plan table

Hi guys,
I was trying to execute 'Explain Plan' on one of my query. However, when I tried to drop the plan table, i was prompted that the table or view does not exists:
QL> EXPLAIN PLAN FOR
2 SELECT * FROM ORDERS WHERE TO_CHAR(O_SHIP_DATE, 'YYYY')='2005' AND O_STATUS='PROCESSING';
Explained.
SQL> SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 1275100350
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 648 | 46008 | 725 (5)| 00:00:09 |
|* 1 | TABLE ACCESS FULL| ORDERS | 648 | 46008 | 725 (5)| 00:00:09 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
1 - filter("O_STATUS"='PROCESSING' AND
TO_CHAR(INTERNAL_FUNCTION("O_SHIP_DATE"),'YYYY')='2005')
14 rows selected.
SQL> TRUNCATE TABLE PLAN_TABLE;
TRUNCATE TABLE PLAN_TABLE
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> select count(*) from plan_table;
COUNT(*)
6
Any idea what went wrong? Thanks in advance.

Ok, I managed to find the scripts to recreate the plan table. Now it works again. Cheers.

Plan table output

Hello guys,
I am on a 9.2.0.7.0, and i am trying to get explain plan for one select that is reading some table through the db link at the remote sight.
Unfortunately, i am getting this output :
1* select * from table(dbms_xplan.display)
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost | Inst   |IN-OUT|
|   0 | SELECT STATEMENT     |             |       |       |       |        |      |
|   1 | REMOTE              |             |       |       |       | TESTI1 | R->S |
Note: rule based optimization
9 rows selected.remote database is 10.2.0.4.0
Can you reccomend me something?
Why can't i see normal output from the plan table, what to do to see it ?
Also , i could'nt find anywhere in the docs the meaning for R->S...
thanks

thanks for your time to reply
@Kartrick
-so can we say that the only way to see that plan would be to connect to that remote instance with that db link user and run it there?
@ravikumar
-this woried me to... so optimizer mode on that remote 10.2.0.4.0 is choose, so can we say that this query is attacking remote table with RBO plan ?

Explain Plan Table

Hi,
I have created the plan_table using utlxplan.sql but still i am getting the error:
ORA-02404: specified plan table not found
Is there something else to be done to get it fixed?
please suggest.
Regards
Arpit

As Lukasz suggested check the table privs between the schema where the table was created and the user trying to use it. Also make sure there's a synonym for the user using explain plan to get to the plan table easily; a public synonym might work best

PLAN TABLE

To see the current statement getting executed im using the session browser utility in TOAD. And to find the plan of the query im going to the view plan tab. But in that tab it saying the plan table is not available. I created the plan table from $ORACL_HOME/rdbms/admin/utlxplan.sql for the user. But even then im not able to see tha explain plan.
I also changed the plan table in TOAD from TOAD_PLAN_TABLE to PLAN_TABLE in view-->options-->General. But still im not able to see the explain plan

Okay, so back to basics: you need to identify whether this is a problem with Toad... or with your PLAN_TABLE. So, just for a moment, ditch toad.
Test one: Connect to the database via SQL*Plus as the user you trying to use to explain the query in Toad. Then issue:
SELECT OBJECT_NAME, OBJECT_TYPE, OWNER
FROM ALL_OBJECTS
WHERE OBJECT_NAME = 'PLAN_TABLE';[pre]
What's the output (and what's the user you're connecting as)?
Message was edited by:
Joseph Crofts
Oops - missed a line from the SQL statement.

Setting the plan table

Similar Messages

Maybe you are looking for