Configuring the graphical planning table (GPT)

Hi folks,
Can anyone help me out here, feeling a bit dumb
I am trying to configure the field layout for the orders pool on the GPT. I have identified my overall profile (SAPSFCG001), the planning table profile (SAPSFCL001), the layout ID (SAPSFCLA05) and the layout key (SAPSFCAS03)
When I edit the layout key SAPSFCAS03, I want to add the operation short text, I have found it in the list and added it to the layout key... all good so far.
When I run CM25 with my overall profile... for some reason the headers are correct but the actual column data is not ... i.e. it hasn't pulled through the operation short text for any orders and to make matters worse, the column headers and the actual data are now out of sync... so under the operation short text I have the work centre name ... what the ?!?!?!
clearly I am missing something here.
Any help would be greatly appreciated.... thanks

Dear ,
Please check in CY38-Lay out key -SAPSFCAS03-Hit change pencil -Please do the following :
1.Remove the high lighte mark from existing Operation Short text column and select the Standatd one ( Operation Short Text line -It will be in down botton -Operation row started with AFVGD -Field lenght 97 ) .
Accordingly mark those field which you want to bring into CM25 taking refernce of Standrad one .
2.Then you hit the Sequence and heading text .
3.Now select the high ligthed row and hit the Select icon ( ink-nip mark ) to move as per your sequence .
4.Finally re-chek with preview and SAVE.
Hope this clarifies
Regards
JH

Similar Messages

Customizing Graphical Planning Table Views

Where do I go to alter the look of the graphical planning tables that I find in transactions like CM21, 27, 31 and 32? There are no labels, everything is gray and difficult to read! Where can I go in and change the way these graphical planning tables look? Mainly the colors of the dispatched orders into the work centers (the single gray bars).

Dear,
Please refer this link,
[Lay-out Profile Set|New Lay-out Profile for CM25]
Regards,
R.Brahmankar

Graphical Planning Table can show quantity?

Dear all,
I am using Graphical Planning Table (MF50), the graphic shows the planned order number for each Material.
How can the graphic show the quantity for each Materials?
Pls help me to configure it.
Thank you very much!
Cao Huy

Hi Huy Cao,
why not to show the order QTY in the table section of the chart for each material? you could create a layout key containing the field GSMNG-PLAF and assign it to the layout of the charts - dispatched and pool via OPDJ.
Cheers,
Mao

DP_How to lock KF in the interactive Planning table

Dear Expert!
I want to lock the data in the Interactive Planning table according to each Key figure and a period of time (that mean I can not change the data of KF after locked). How can I do?
e.g: I created a Planning book and data view with following Key Figure:
- Forecast
- GDP
- CPI
- Historical Data
And the time bucket profile of this planning book as following:
- Past: 24 months
- Future: 12months
Now, I want to lock data of the KF "Forecast" in all past and future; lock data of other KF (GDP, CPI, Historical data) in past period.
How can I do now!
I hope to know the question soon. Thanks for your support!
LeGiang

Hi LeGiang,
If you would like to not allow any manual input for ALL the key figures in the past, then the solution for this "history" part would be quite easy.
When you define the planning view, specify the "input from" date as the current date. This way, no-one would be able to change any data in the past manually.
The above would also take care of not allowing any manual changes to "Forecast" in the past.
If however, you want only certain KFs should be non-editable while others should be editable, then you should use the function CELL_INPUT:
Syntax would be like
<Macro Name>
   <Step Name> ( <Maintain 'processing Area' as 'past'>)
       Cell: <Key Figure Row name> ( Attributes ) =
          CELL_INPUT(0)
In above, remember that in <Step> row, you should double-click and change the value of the field 'change scope' to "attributes" from 'values'.
For the future and past, if you want that Forecast should be non-editable, then you could do this by another macro. Define a default macro that would change the attribute of the KF for Forecast as "no input allowed" for all the time periods. You could do this by using the function ROW_INPUT.
Your macro would look like -
<Macro Name>
    <Step Name> : ( 1 Iterations :INITIAL;INITIAL )
        Row: <Key Figure name e.g. Forecast> ( Attributes ) =
           ROW_INPUT( 0)
In the row line above, remember to double click and change the value of the field 'change scope' to "attributes" from 'values'.
If you need more help, do let me know. This second macro would actually make the whole row non-editable. You could create these macros as a default macro, and have them run in the end after the other default macros.
Thanks - Pawan

Not able to connect to the database while configuring the Hyperion Planning

Hi all,
I am trying to configure Hyperion Planning, i am getting error while connection to the database,
and i am not able to connect to the sqlserver management studio using sql server authentication mode, while installing sql server i selected as windows authentication mode,
here is my environment:
OS: Windows Vista
Database: MS SQL Server 2005, with Windows authentication mode
Hyperion9.3.1: Planning, Essbase server, shared services.
can anyone let me know what is the error? or do am i missing any step,
appreciate your help.
Thanks
Afjal

Hi,
First of all Vista is not supported as O/S for Hyperion server products, so if you encounter any problems it may be due to that.
It is possible to use windows authentication mode but some have problems with it and end up going down the sql server authentication route.
It is possible to change SQL server to mixed mode.
Cheers
John
http://john-goodwin.blogspot.com/

Clear the History Data Automatically in Production Planning Table MF50

Dear Friends,
I have the problem to set the Production Planning Table (Txn MF50) to
clear the history data automatically. Currently, all the history data
in the planning table has to be cleared manually.
Appreciate your help.
Rgds
Zahari Yusof

instead of just removing the whole history like private browsing do, i just want to remove browsing/download history and form&search. i didn't want to remove cookies and active logins, heheh. thank you

Setting the plan table

any way to do set the explain plan table sqlDev version 1.2
Thanks

Again, what is the problem, and why running @?/rdbms/admin/utlplan would not suffice? If you don't have access to the source on rdbms server, there is still a million ways to do it. You can copy plan table as create as select from plan_table@dblink, or find plan table definition on the web and run it in sql worksheet.

Ability to display multiple texts within graphic planning board Gantt chart

I have been unable to change the planning board Bar Chart Graphic Profile (OPG0 and OPG9) to be able to display both material text and a user field within the Gantt chart graphic. I have copied the SAPSFCG011 profile and created my own. The profile is displayed below from CMCH.
Overall prof: ZBWSFCG011           SFC: View work center/capacity (3 graf.)
...... Select.profile:                     ZBWSFCS001      SFC: View work center -> cap.(3 graf.)
...... Control profile:                    ZBW___C002      Gen: Planning table
...... Time prof:                           ZBW___Z002      Gen: Medium-term (3 months)
...... Evaluation prof.:                 ZBW___A001      Gen: Standard evaluation profile
...... Strategy prof.:                    ZBW___T001      Finite scheduling forw./all functs.activ
...... Capacity planning table:      ZBWSFCL010      SFC: only main cap. (3 graf.)
.......... Graphics profile                      ZBW___X002      BARC    1 Default profile 2 Capa. planning board
.......... Chart sequence                      ZBWSFCT002      SFC: Main caps. (3 graph.)
.......... Layout ID                                 ZBWSFCLA10      SFC: Work center view     (graphical)
.......... LineRepresSelection                 ZBW___ZR02      SAP standard 2
.......... Scale time axis                         SAP___M031      Stand. weekly per. split rough
.......... Graph.object.select.                ZBW___OA02      Pool group order path
.............. DStat Sq Structur Field na ROp Comparison val NStat Struct
.............. 00000 01 KBED     TYPKZ    NE 1                      00001
.............. 00000 02 AFVG     OBJNR    ST SAP005         00000 SAP002 Standard operation partially confirmed
.............. 00000 03 AFVG     OBJNR    ST SAP006         00000 SAP003 Standard operation completely confirmed
.............. 00000 99                   DEF                                  00000 ZJB000 Standard operation
................... Graphical object type               ZJB000          Standard operation
........................ Form type                           22              Plan. board:Graphic obj. w. ordNo matTxt
........................... Form group                          ZBW001
............................... Form definition                     PLTO22          Planning board graphic order and mat.txt
.................................. Layout definition                   [[$a//$b]]
.................................. Layout definition
.................................. Layout definition
.................................. Layout definition
In addition to the profile change, I have configured the graphical object type ZJB000 (in OPG9) to look as follows:
0     AFKO     Order header                          MATXT     Material description
2     KBED     Capacity requirements     A     SSTAD     Latest start / date     SSTAU     Latest start / time
3     KBED     Capacity requirements     A     SSSBD     Latest scheduled start: Processing (date)     SSSBZ     Latest scheduled start: Processing (time)
4     KBED     Capacity requirements     A     SSSAD     Latest scheduled start: Teardown (date)     SSSAZ     Latest scheduled start: Teardown (time)
5     KBED     Capacity requirements     A     SENDD     Latest finish / date     SENDU     Latest finish / time
6       AFVG    Order operation                       USR08    User field for date
I have found that the 2nd text field (USR08) must be added as the last step (#6). When I had it as #1, the planning board did not display the USR08 value.
Now both are displayed in the Gantt chart graphic. However, it is difficult to see this long string of data as the bars in the Gantt chart may not be long enough to display the data.
Therefore we would like to use the "hover over" text which is displayed in the status line at the bottom of the screen. We have tried using both the Info Text and the Quick Info options within the Bar Chart: Options Profile (OPG0). Only the first text (the material descirption) is dislayed within either the Quick Info or the Info Text.
Is it possible to have multiple object values appear in Quick Info or Info Text? Or is it possible to control which text is displayed in the Quick Info or Info Text?
Any help in this area would be greatly appreciated, as this is a make-or-break issue for the business to use the planning board. Thank you!

I'm also looking for a standard customizing alternative to do the same thing.
Still, if you're interested, I've already done it successfully with user exit PLAT0001.
Hope this helps.
Best regards.

Error message in capacity planning table

Hi,
I am using REM planning table.I enter the planning table by giving the selection criteria of Plant and production line.
System is giving following error message,
the error message and dignosis of the error message is given here.
'No prod. dates for material MTI_FERT011, version 0001, production line 2279'
Message no. REMPT315
Diagnosis
The planned order has no production dates for the combination of material, production version and production line you specified.
This may be as a result of the following, for example:
The planned order was scheduled but not using the production line you selected. (The production line is determined by the production version you entered in a planned order.)
Procedure
One possibility of finding out what is causing the problem is:
To access the planned order from the detailed dialog box in the table via "Change" and reschedule the planned order. Check the scheduling log by choosing "Goto --> Scheduling log". More information is displayed in the log's warning or error messages.
But which master data to be corrected is not known.
Experts please guide me.
Regards,
Ravindra

Hello,
I had the same error while working with the REM planning table, despite the consistency of the data.
Another cause that can lead to the error message REMPT315 is that in the production version detailed screen, "Planning data" table you have entered the routing next to rate-based planning. You must enter the routing (number of the group and the group counter) on the line detailed planning.
After that, choose check again and try to introduce new quantities in the planning table. It worked for me!
Irina

Question on Plan Table

Hi,
This is the Explain Plan for one of my SQL queries
PLAN_TABLE_OUTPUT
| Id | Operation            | Name       | Rows | Bytes | Cost | Inst   |IN-
OUT|
|   0 | SELECT STATEMENT     |             |   101 | 7676 |    60 |        |
PLAN_TABLE_OUTPUT
   |
|   1 | SORT ORDER BY       |             |   101 | 7676 |    60 |        |
   |
|   2 |   NESTED LOOPS OUTER |             |   101 | 7676 |    50 |        |
   |
|   3 |    VIEW              |             |   100 | 2400 |     5 |        |
   |
PLAN_TABLE_OUTPUT
|   4 |     UNION-ALL        |             |       |       |       |        |
   |
|   5 |      REMOTE          |             |       |       |       | MKTG   | R-
S ||   6 |      REMOTE          |             |       |       |       | MKTG   | R-
S ||   7 |    REMOTE            |             |     1 |    52 |     1 | MKTG   | R-
S |PLAN_TABLE_OUTPUT
Note: cpu costing is off, PLAN_TABLE' is old versionI am concerned about the note "cpu costing is off"
Does this mean my optimizer is RBO?
Moreover, what is the cost cloumn in the explain plan table meant by?
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for HPUX: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
I did 'select cpu_cost' from v$sql_plan;'
The column results in NULL values.
Thanks
Rajiv

Hi Justin,
I ran into some serious problem here.
As per the suggestions given, this is the modified query
SELECT   x.rep_date,
               x.certificate_id,
               x.member_kit_flag,
               y.enabled_date,
               y.disabled_date,
               TRUNC(y.creation_date) - TRUNC(x.rep_date) days,
               y.csg_account_no
          FROM (SELECT /*+ DRIVING_SITE(pt_gift_cert_referrals) */ a.*,
                       /*+ DRIVING_SITE(pt_cd_mailings) */ b.member_kit_flag,
                       to_date(b.shipment_date,'dd MON YYYY') rep_date
                  FROM pt_gift_cert_referrals@mktg a,
                       pt_cd_mailings@mktg b
                 WHERE a.cert_mailing_id = b.cert_mailing_id
                   AND to_date(b.shipment_date,'dd MON YYYY') >= '22-AUG-2003'
                UNION ALL
                SELECT /*+ DRIVING_SITE(pt_gift_cert_referrals) */ a.*, /*+ DRIVING_SITE(pt_certificate_referrals) */
                       'Z' member_kit_flag,/*+ DRIVING_SITE(pt_cert_stage_log) */
                       to_date(b.creation_date,'dd MON YYYY') rep_date
                  FROM pt_gift_cert_referrals@mktg a,
                       pt_cert_stage_log@mktg b
                 WHERE a.cert_event_id = b.cert_event_id
                   AND SUBSTR(b.process_type, 1, 14) = 'CLUBDISH DAILY'
                   AND to_date(b.creation_date,'dd MON YYYY') >= '22-AUG-2003') x,
               pt_certificate_referrals@mktg y
         WHERE x.certificate_id = y.certificate_id(+)
      ORDER BY rep_date,
               x.certificate_id;Unfortunately, the query resulted in NO rows.
no rows selected
Elapsed: 00:02:31.03
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=60 Card=101 Bytes=76
          76)
   1    0   SORT (ORDER BY) (Cost=60 Card=101 Bytes=7676)
   2    1     NESTED LOOPS (OUTER) (Cost=50 Card=101 Bytes=7676)
   3    2       VIEW (Cost=5 Card=100 Bytes=2400)
   4    3         UNION-ALL
   5    4           REMOTE*                                            MKTG.WOR
                                                                       LD
   6    4           REMOTE*                                            MKTG.WOR
                                                                       LD
   7    2       REMOTE* (Cost=1 Card=1 Bytes=52)                       MKTG.WOR
                                                                       LD
   5 SERIAL_FROM_REMOTE            SELECT /*+ */ "A2"."CERTIFICATE_ID","A2"."GI
                                   FT_CSG_ACCOUNT_NO","A2"."CERT_PROMOT
   6 SERIAL_FROM_REMOTE            SELECT /*+ */ "A2"."CERTIFICATE_ID","A2"."GI
                                   FT_CSG_ACCOUNT_NO","A2"."CERT_PROMOT
   7 SERIAL_FROM_REMOTE            SELECT "CERTIFICATE_ID","CSG_ACCOUNT_NO","EN
                                   ABLED_DATE","DISABLED_DATE","CREATIO
Statistics
          0 recursive calls
          0 db block gets
          0 consistent gets
          0 physical reads
          0 redo size
        338 bytes sent via SQL*Net to client
        234 bytes received via SQL*Net from client
          1 SQL*Net roundtrips to/from client
          1 sorts (memory)
          0 sorts (disk)
          0 rows processedThe thing more bothering is, optimizer is not using the DRIVING_SITE hint
Previous Execution Plan was....
6742176 rows selected.
Elapsed: 03:15:20.07
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=53 Card=100 Bytes=76
          00)
   1    0   SORT (ORDER BY) (Cost=53 Card=100 Bytes=7600)
   2    1     NESTED LOOPS (OUTER) (Cost=50 Card=100 Bytes=7600)
   3    2       VIEW (Cost=5 Card=100 Bytes=2400)
   4    3         UNION-ALL
   5    4           REMOTE*                                            MKTG.WOR
                                                                       LD
   6    4           REMOTE*                                            MKTG.WOR
                                                                       LD
   7    2       REMOTE* (Cost=1 Card=1 Bytes=52)                       MKTG.WOR
                                                                       LD
   5 SERIAL_FROM_REMOTE            SELECT "A2"."CERTIFICATE_ID","A2"."GIFT_CSG_
                                   ACCOUNT_NO","A2"."CERT_PROMOTION_ID"
   6 SERIAL_FROM_REMOTE            SELECT "A2"."CERTIFICATE_ID","A2"."GIFT_CSG_
                                   ACCOUNT_NO","A2"."CERT_PROMOTION_ID"
   7 SERIAL_FROM_REMOTE            SELECT "CERTIFICATE_ID","CSG_ACCOUNT_NO","EN
                                   ABLED_DATE","DISABLED_DATE","CREATIO
Statistics
          0 recursive calls
         14 db block gets
          0 consistent gets
      14173 physical reads
          0 redo size
112195379 bytes sent via SQL*Net to client
    3146621 bytes received via SQL*Net from client
     449480 SQL*Net roundtrips to/from client
          0 sorts (memory)
          1 sorts (disk)
    6742176 rows processedAny help on this would be greatly appreciated.
Thanks
Rajiv

Calculating the Size(KB) in the explain plan....

Hi
I executed a sql statement in SQL*PLUS and having enabled the tracing in OEM , among others , I read the Size in KiloBytes which the 'TABLE ACCESS FULL' segment of the explain plan returned.....
This number is 5.998,193KB
I used the vsize built-in function in order to get the total number in bytes of the physical representation of all the rows (about 53500) ....
So , I wrote :
select nvl(sum(vsize(farmak_code)),0)+nvl(sum(vsize(emp_name)),0)+nvl(sum(vsize(category)),0)+ .....+.....
from mitroo_farmakou
The result was 5794544 in bytes which is close to 5.998,193KB.
My question is :
The computation of the bytes in the explain plan (TABLE ACCESS FULL segment) is done by adding the vsize of all columns....????
Does anybody Knows...????
Thanks , a lot
Simon

I doubt it. For a large table that would be an incredibly expensive calculation.
I suspect that it is something closer to:
SQL> SELECT * FROM incident;
Execution Plan
   0      SELECT STATEMENT Optimizer=CHOOSE (Cost=137 Card=15603 Bytes=6818511)
   1    0   TABLE ACCESS (FULL) OF 'INCIDENT' (Cost=137 Card=15603 Bytes=6818511)
SQL> SELECT ROUND(num_rows * avg_row_len)
2 FROM user_tables
3 WHERE table_name = 'INCIDENT';
ROUND(NUM_ROWS*AVG_ROW_LEN)
                    6818449HTH
John

Planning Table MF50

Hello experts,
Can some one please explain the purpose of the planning table MF50 and how to use it for capacity levelling. I am in a REM environmnt.
Thanks
Raman

HI
1)In Repetitive Manufacturing, the master plan is represented by the planning table. The planning table is a tool for operative planning and is used to plan the production quantities:
2) In a repetitive manufacturing environment, planning and control is usually carried out in a period and quantity basis. The layout of the planning table has been designed to support this requirement and is also based on periods to provide a very clear, easy-to-interpret overview of materials and production lines.
3)The planning table is the planneru2019s/MRP controlleru2019s most important tool for planning the production quantities. At a glance the planner can check production quantities, monitor the available capacity of the production lines and check up on the availability situation of the products produced on each line.
4)You can directly enter and change production quantities in the planning table. You can assign u2018non-assignedu2019 production quantities to the production lines or you can reassign production quantities to alternative production lines.
5) You create the production quantities or assign them to the production line in the planning table.
6 )You can also use the planning table with capacity planning. Here, planning is based on lead time scheduling. The basis for lead time scheduling is the routing. You can access the capacity planning table directly from the REM planning table.
Regards
Anupam Sharma

Interpret sample schema of sample plan table

Hi guru,
May I know if my following understanding and interpretation on the sample plan table (sampling type is sampling schema) is correct:
Lot Size ---Sample Sze---c1--------d1--------c2 ------ d2------c3-------d3------c4------d4 --------c5---------d5----------c6-----------d6----------c7------------d7
10000----------20--------0----------4--------0---------4-------0---------4------0--------4----------0---------4-----------0------------4------------0-------------0
If lot size is equal or above 10000, the sample size computed by the system will be 20.
The first sample has an acceptance of zero (C1) and rejection of 4 (d1). In another word, if there is 4 or above 4 sample size is fail, it will be rejected. Correct?
Question 1 - what does the zero in C1 means? actually what is the usage of C1, C2, CN means, someone told me it is optional?
Next, if on the first sample, the 4 out of 20 of the sample size are failed, the inspection lot is failed.
Therefore, the system will triggers 2nd sample (i.e. C2, and D2) in which it is similar to C1 and D1 (i.e. 0 for acceptance, 4 for rejection), and if it fail again, the system will trigger the subsequent sample (i.e. C3, and D3) till C7 and D7, correct?
Question 2 - what will the system response if the sample lot kept failing until C6 and D6? Because the last sample (i.e. C7, and D7 are both 0), what will the system do on this?
Thanks
YY

Hi Gajesh,
Thanks so much on your reply, but on the answer 4 which you replied to me, I still have a bit double..
4) Question 2: what if I have 5 sample size, and the actual test result is 2 sample size are pass (which meet C1 value), and 3 sample size are fail (which is smaller than D1 value), I said the whole MIC is pass.. am I correct?
*You said: No, system will propose you to check next sample to check C2 /D2*
Why system propose the next C2/D2? My rational is based on the following statement which you previously confirmed that I am correct:
IF the actual number sample size inspection fall outside the lower & upper limit range (i.e. fail) is Equal to OR Larger than D1, THEN, the whole MIC is rejected.
Thus, my rational is if the above statement is correct, which mean if the failed number of sample size (i.e. 3) is less than d1 (i.e. 4), isn't it clearly pass? Furthermore, out of the 5 sample size, 2 sample sizes are passed (i.e. which is equal to the C1 of 2). Thus, why would the system still propose to check next which is C2/D2? Beside on the very first time, you had replied to me on this topic you saidu2026.
Suppose you have a lot size of 10 having sampling size 5 with C1(acceptance number) 0 and D1(rejection number) 3
You have quantitative MIC with single recording with a specification limit of 10 (lower) to 20 (upper)
If, in actual results, if the 3 of the results is outside the spec limits, the MIC as whole is rejected. If only 2 results are rejected the MIC stands accepted.
The following is the sample plan we talking about...
Lot Size -Sample Size-c1--d1c2---d2--c3---d3--c4--d4 -c5d5c6d6c7--
d7
10--52404---04--0404040--
0
Thanks,
Yong-Yeow

Product Planning Table

In the Product Planning Table (/SAPAPO/PPT1), Product View: Periodic we see the caption Make-to-Stock Production which is the Requirement strategy.How can we hide the caption (requirement strategy) in the PPT1.

Dear Rekha Panicker,
In user setting in product planning table, go through Product 2 -> Forecast then you will find the row description section.
Delete the number marked in "Desc.plg strat.".
Hope this would help you.
Beragrds,
Lee, Seung Won

Plan Table Not Being Created

When I place the cursor on a statement and press F6, sqldev asks me if I want to create the missing plan table. If choosing YES, nothing happens, no output to the console, no plan table is created. F6-ing again and the same happens again and again.
After executing ?/rdbms/admin/utlxplan.sql (using the same connection info), it works.
This is against 9.2.0.4.

>
Normal table fine but trying syntax below but tabel properties show no compression
>
What properties? You didn't show any query or result that shows if the table is compressed or not.
>
nOW HSOING AT TABLE LEVEL OR ON TABLE PORPETIES BUT WHEN check user_tab_partitions shows as compressed for oltp
>
I have no idea what any of that means.
Again - you didn't post anything showing if the table is compressed or not. And without the DDL for the source table no one can try to reproduce your results.
Thanks for using code tags and posting some of the DDL needed but you should edit your post and REMOVE all of the extra partition definitions since all they do is bloat the listing.
This works for me in vanilla 11.2.0.1.0
create table EMP_PART parallel
COMPRESS FOR OLTP
partition by range (hiredate)
INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))
subpartition by hash (deptno)
subPARTITIONS 4
partition all_data values less than (to_date('01/01/2013', 'mm/dd/yyyy')
as select * from emp
select table_name, compression, compress_for, composite, partition_name
from user_tab_partitions
TABLE_NAME COMPRESSION COMPRESS_FOR COMPOSITE PARTITION_NAME
EMP_PART ENABLED OLTP YES ALL_DATA

Configuring the graphical planning table (GPT)

Similar Messages

Maybe you are looking for