Setting the selectOneChoice value at runtime

Hi,
I need to set the selectOneChoice value at runtime. On Page Load I am creating object of RichSelectOneChoice and currencyCode.setValue("USD");
When I check on runtime it is not showing "USD" as selected item in dropdown where as in background it is sending USD to downstream application.
How to get the show the value in SelectOneChoice which is selected at runtime in code?
Thanks in advance.

Hi,
Selected value will be taken from the value property of selectOneChoice component, I guess you don't have specified value property. Create a String instance variable in bean and then set the value 'USD' to this variable and then bind it to value property of selectOneChoice component.
Sample:
//inside bean
private String selectedValue;
//Getter and Setter methods
//Replace the currencyCode.setValue("USD"); line with the below code
this.selectedValue = "USD"
//Finally in jspx page bind this selectedValue to value property of bean
<af:selectOneChoice value="#{bean.selectedValue}" ... />Sireesha

Similar Messages

How to set the Selectonechoice Value associated with MethodAction

Hi All,
I am using Jdeveloper 11.1.1.5 and i have a two textbox on my page and one selectonechoice.I am fetching the values from the Master Table in the dropdown by sending the supplierVatId and SupplierPostCode and the base dataSource of the selectonechoice is my transaction table(InvoiceHeaderTable).
My jspx page source is :-
<af:inputText value="#{bindings.Suppostcode.inputValue}"
binding="#{backingBeanScope.backing_parkSupplierId.it7}"
id="it7">
</af:inputText>
<af:inputText value="#{bindings.Suppvatid.inputValue}"
binding="#{backingBeanScope.backing_parkSupplierId.it8}"
id="it8">
<f:validator binding="#{bindings.Suppvatid.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:selectOneChoice value="#{bindings.supplierid.inputValue}"
binding="#{GeneralManagedBean.suppid}"
id="soc1">
<f:selectItems value="#{bindings.supplierid.items}"
binding="#{GeneralManagedBean.suppiditems}"
id="si1"/>
</af:selectOneChoice>
and this is my pageDef code :-
<attributeValues IterBinding="InvoiceheaderView1Iterator" id="Suppostcode">
<AttrNames>
<Item Value="Suppostcode"/>
</AttrNames>
</attributeValues>
<attributeValues IterBinding="InvoiceheaderView1Iterator" id="Suppvatid">
<AttrNames>
<Item Value="Suppvatid"/>
</AttrNames>
</attributeValues>
<methodAction id="getSupplierIdfromDB" RequiresUpdateModel="true"
Action="invokeMethod" MethodName="getSupplierIdfromDB"
IsViewObjectMethod="false" DataControl="SupplierDetailImpl"
InstanceName="SupplierDetailImpl.dataProvider"
ReturnName="data.SupplierDetailImpl.methodResults.getSupplierIdfromDB_SupplierDetailImpl_dataProvider_getSupplierIdfromDB_result">
<NamedData NDName="supplierpostcode"
NDValue="#{bindings.Suppostcode.inputValue}"
NDType="java.lang.String"/>
<NamedData NDName="suppliervatid"
NDValue="#{bindings.Suppvatid.inputValue}"
NDType="java.lang.String"/>
</methodAction>
<list IterBinding="InvoiceheaderView1Iterator" id="supplierid"
DTSupportsMRU="true" StaticList="false"
ListIter="getSupplierIdfromDBIterator">
<AttrNames>
<Item Value="Suppid"/>
</AttrNames>
<ListAttrNames>
<Item Value="supplierid"/>
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="supplierid"/>
</ListDisplayAttrNames>
</list>
</bindings>
And i have a button on the page called as "Clear DropDown".Now on click of Clear DropDown button i need to clear the dropdown list and need to set a new value in the SupplierId selectonechoice.For the testing purpose it can be a static value like "Shah".
I am trying to do like this but no help ..
public String clearDropDown() {
ValueExpression suppid1 = null;
String id = "Shah";
suppid1 =
elFactory.createValueExpression(elContext, "#{bindings.supplierid.attributeValue}",
Object.class);
suppid1.setValue(elContext,id);
AdfFacesContext.getCurrentInstance().addPartialTarget(suppid);
AdfFacesContext.getCurrentInstance().addPartialTarget(suppiditems);
return null;
Please suggest!!!
Regards,
Shah

While setting the value, it is giving me this warning in the logs :-
*<FacesCtrlListBinding> <getInputValue> ADFv: Could not find selected item matching value Shah of type: java.lang.String in the list-of-values*.
I know that the Shah is not present in the List but how do i clear the list and set the New Value which is "Shah".
Please Suggest!!
Regards,
Shah

How to set the default value of selectOneChoice

Hi All,
I have two selectOneChoice(soc1 and soc2) in two respective pages with the same datacontrol.Now i need to set the default value of soc2 as per the value selected in soc1.
For eg:-
if user has selected a value in soc1 say "Bag" in the list then it should set the default value in soc2 as "Bag" when the second page loads.As both the selectOneChoice has been created using same data contol.
How can i achieve this?
Please suggest.

Hi PR/Suresh,
Thanks for your reply.
My soc1 shows the employeeId like 100,101,102,103 but it holds the value as employeeName like Navn,Joy,Steve,Mark. I have used valuechangeevent to get the current selected value from soc1 but when i set the value in soc2 in its set property then the log says :-
*<SimpleSelectOneRenderer> <_getSelectedIndex> Could not find selected item matching value "Navn" in RichSelectOneChoice[UIXEditableFacesBeanImpl, id=soc2]*
My jspx page code of soc2 is :-
<af:selectOneChoice binding="#{backingBeanScope.backing_temp2.soc2}"
id="soc2"
label="#{bindings.FirstName.label}">
<f:selectItems value="#{bindings.FirstName.items}"
binding="#{backingBeanScope.backing_temp2.si2}"
id="si2"/>
</af:selectOneChoice>
and in my bean where i am accessing the value from valuechangeevent from soc1:-
public void getValue(ValueChangeEvent valueChangeEvent) {
BindingContext bindingContext = BindingContext.getCurrent();
oracle.binding.BindingContainer bindings = bindingContext.getCurrentBindingsEntry();
//for iterator name click binding tab in the jsf page
DCIteratorBinding iter = (DCIteratorBinding) bindings.get("Employees1View1Iterator");
int curIndex = (Integer)valueChangeEvent.getNewValue();
Row datRow = iter.getRowAtRangeIndex(curIndex);
String name = (String)datRow.getAttribute("FirstName");
System.out.println("the new value is"+name);
RequestContext requestContext = RequestContext.getCurrentInstance();
requestContext.getPageFlowScope().put("value", name);
and then i am setting it to the soc2 in backing bean :-
public void setSoc2(RichSelectOneChoice soc2) {
this.soc2 = soc2;
RequestContext requestContext = RequestContext.getCurrentInstance();
String val = requestContext.getPageFlowScope().get("value").toString();
this.soc2.setValue(val);
In this error i can predict that it is not able to find the 'Navn' in the list of soc2 because in the list it has employeeId which has corresponding value as name of that employee but how do i set the value in soc2 then.
*<SimpleSelectOneRenderer> <_getSelectedIndex> Could not find selected item matching value "Navn" in RichSelectOneChoice[UIXEditableFacesBeanImpl, id=soc2]*
Any ideas??
Thanks

Unable to set the selected value for a ADF LOV

Hi,
I am developing an application using jdeveloper 10.1.3 and Struts.
I have created a ADF LOV on my JSP Page as given below:
<html:select property="lob" onchange="javascript:selectLOB(this.form)">
<html:optionsCollection label="prompt" value="index" property="lob.displayData"/>
</html:select>
When i submit the form, i am able to get the value of the selected Value in the List.
JUCtrlListBinding listBinding = (JUCtrlListBinding) formBean.get("Lob");
Row r = (Row) listBinding.getSelectedValue();
String SoLob = (String) r.getAttribute("LobLob");
But i am unable to set the selected value back in the list when i return to the form again.
I tried the following:
int x = listBinding.getSelectedIndex();
listBinding.setSelectedIndex(x);
It would be really helpful if some one could let me know what needs to be done.
Thanks,
Subashini

Gyan,
I tried with the code you suggest , its trying to set the value of a field, but my requirement is to change the property for
"Rendered" on the field so that based on search parameters we can hide result table column.
After searching online, I modified the controller code as follows
1.Created a new transient attribute (Testrender) with type "Boolean" and always updateable.
2.changed the "Rendered" property value on the field I want to hide as ${oa.PoSearchVO1.Testrender}.
3. Modified the controller code as follows :
        OAApplicationModule am = pageContext.getApplicationModule(webBean);
        OAViewObject testvo = (OAViewObject)am.findViewObject("PoSearchVO1");
        OADBTransaction txn = am.getOADBTransaction();
        if (testvo != null)
          OARow row = (OARow)testvo.first();
            if (a.equalsIgnoreCase("Approved"))
                 row.setAttribute("Testrender", Boolean.FALSE);
            else
                 row.setAttribute("Testrender", Boolean.TRUE);
        } But now when i run the page and populate the search field and click "Go" its hiding the field but throwing the following error and the search results are also bad.
Its using only the value of one search parameter but not the second one .
The search cannot be executed because the table has pending changes that would be lost. I think the vo is getting dirty when I update the transient attribute value. So I used txn.rollback ,then search is working fine but its not hiding the field.
So can you please let me know how to proceed from here ?

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to set the default value of a LOV that is found in a view criteria

HI,
I need to set the default value of an LOV that is found in a view criteria. I tried to set a groovy expression but unfortunately it wasn't read. i also tried to bind the LOV to a bind variable and set the value of the bind variable in the constructor of my backing bean but unfortunately the default value appeared the second time i entered the screen and not on page load.
Can anyone advise where can i set the default value,
Thanks

if you want some default value in LOV. you go to edit list of value wizard-> UI hint->include no selection Item checkbox -checked.use labeled item first of list- and beside that put the label. but when you try to get value, it will show null.but you can manipulate in ur java , if it default value

How to set the default value of a database column to NULL

Hello,
I want to set the default value of a column (VARCHAR2(20) to NULL, nut I cannot figure out to do this. I tried the following editing the offline table with JDeveloper:
Default Value : <empty> -> On database NULL
Default Value: '' -> On database ''
When I create a new column, there is no default value on the database side and when I open the tabe properties in the database navigator I can see that the default value is (null). This is what I want to see in the other column as well. I don't know why sometimes a default value is visible on the database side (when generating form offline tables to database tables) and sometimes not.
Perhaps sombody can bring some light in this issue.
Thanks Thomas

Hello Shay,
I have the impression that you don't understand my problem. So here step by step:
1. Create a offline Table TEST with one column TEST: VARCHAR2(20). nullable=true, no default value.
2. Generate the table to the database
3. When you look at the table properties (columns) with the database navigator the following information is displayed (sorry for the formatting):
Column Name | Data Type | Nullable | Data Default | COLUMN ID| Primary Key | COMMENTS
TEST | VARCHAR2(20 BYTE | Yes | (null) | 1 | (null) | (null)
4. Now set the default value for the column TEST in the offline table for example to 'Test'
5. Generate the table to the database.
6. When you have a look at the database table, the default value is now 'Test' (as expected)
7. Now remove the default value of the column TEST in the offline table
8. Generate the table to the database
9. When you have a look at the database table, the default value is now NULL (in uppercase letters without parenthesis)
And this is where the problem starts!
When you generate the table again with the options "Alter/Manual Reconcile" the default value of the column test is considered to be different! But in fact it should'nt be different because nothing has been changed.
Best regards Thomas
Edited by: thmayr on May 28, 2009 9:05 AM
Edited by: thmayr on May 28, 2009 9:31 AM

Setting the cookies value

hi,
when i do, submiting the page i'm able to set the cookie value.I'm not getting any messages. But the Same time when i call the proceudre with parameters from the URL i'm not able to store the cookie value.
It display's the message like this and the value is not stored in the cookies
Content-type: text/html Set-Cookie: emp_no=9999X; path=/;
my code is :
owa_util.mime_header('text/html',FALSE);
     owa_cookie.send('emp_no',UPPER(lv_emp_no),null,'/',null,null);
owa_util.http_header_close;
How do i solve this problem?
Thanks

Hi,
Here are a couple of things you can try:
1) remove the following line because it shouldn't be necessary:
the_cookie.num_vals :=0;2) remove the following line because the owa_cookie.send will automatically replace any existing cookie:
     owa_cookie.remove('emp_no',the_cookie.vals(1),null);3) try capturing the cookie value in a local variable and printing it (after htp.body, of course) to see if it is working correctly.
4) enable the browser to prompt you when a cookie is being set so that you can verify whether it is being set or not.
HTH,
Ashesh Parekh
Oracle9iAS Product Management
hi,
Something like this...
Code
PROCEDURE checkLogin ( emp_no in varchar2 default NULL) IS
     pv_check_f      BOOLEAN ;
the_cookie      owa_cookie.cookie;
BEGIN
pv_check_f := FUN_EMP_PASSWORD(UPPER(emp_no) ) ;
IF NOT pv_check_f THEN
     v_msg := 'Sorry Log on denied';
     RAISE EMP_ERROR;
     END IF ;
the_cookie.num_vals :=0;
the_cookie:= owa_cookie.get('emp_no');
if the_cookie.num_vals= 0 then
          owa_util.mime_header('text/html',FALSE);
          owa_cookie.send('emp_no',UPPER(emp_no),null,'/',null,null);
          owa_util.http_header_close;
     else
          owa_util.mime_header('text/html',FALSE);
     owa_cookie.remove('emp_no',the_cookie.vals(1),null);
          owa_cookie.send('emp_no',UPPER(emp_no),null,'/',null,null);
owa_util.http_header_close;
end if;
htp.p('<script language="javascript">
window.location="http://www...URL";
</script>');
     htp.formclose;
EXCEPTION
     WHEN EMP_ERROR THEN
     Pageheader;
Procedurename.Banner('Login denied');
htp.fontOpen('red','Arial Narrow');
htp.header(3,lv_msg);
loginagain;
htp.fontClose;
htp.centeropen;
     htp.br;
     htp.p('<INPUT type="button" value="Back" onClick="history.back()">');
     htp.br;
     htp.centerclose;
pagefooter;
END checkLogin;
calling the Procedure "checklogin" with the parameter emp_no from the URL like this
"http://....:8810/dir/Packname.checkLogin?emp_no=9ABCDS".
Waiting for ur replay.
Thanks.

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

Iam using a table in numbers to plot daily graph lines. If I fill a cell with a text box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is tho

I am using a table in Numbers to plot daily graph lines. Mood swings of how I am on the day, i"m a depressive.
If I fill a cell with a step box at say zero it plots the graph. I can't actually set the cell value until the actual day but the graph plots it at zero when I don't want it to plot anything. Is there a work around. so thatbgraph only plots on the day?

The answer is (sort of) in your subject, but edited out of the problem statement in the body of your message.
When you use a stepper or a slider, the value in the cell is always numeric, and is always placed on the chart if that cell is included in the range graphed by the chart.
But if you use a pop-up menu cell, you can specify numeric or text values in the list of choices for in the menu. Numeric values will be shown on the chart. Text values will not.
For the example, the values list for the pop-up menu was:
5
3
1
Choose
-1
-3
-5
The first pop-up was set to display Choose, then the cell was filled down the rest of the column. Any text value (including a single space, if you want the cell to appear blank) may be used instead of Choose.
For charts with negative Y values, the X axis will not automatically appear at Y=0. If your value set will include negative values, I would suggest setting the Y axis maximum and minimum to the maximum and minimum values on your menu list, rather than letting Numbers decide what range to include on the chart. Place a line shape across the chart at the zero level, and choose to NOT show the X axis.
Regards,
Barry

How to set the initial value of of a poplist dynamical

Hi,
I've got a poplist that is populated by a recordgroup. This is done by the following pre-form trigger:
DECLARE
     l_query_ok NUMBER;
     l_group_id RecordGroup;
     l_it_id     item;
     l_int_value VARCHAR2(2);
BEGIN
     l_it_id := Find_item('MERGED_ISSUER.product_code');
     l_group_id := FIND_GROUP('RG_PRODUCT_CODE');
     l_query_ok := POPULATE_GROUP(l_group_id);
     -- Populate list 'Product Code'
     CLEAR_LIST (l_it_id);
     POPULATE_LIST(l_it_id,l_group_id);
END;
I've tried to set the initial value by adding following lines to the trigger above but I receive the frm-41084 error. This code assigns the first value of the recordgroup to a hidden text item. In the properties of the poplist the value of the hidden text field is set as initial value.
-- Set initial value
l_int_value := Get_Group_Char_Cell('RG_PRODUCT_CODE', 1);
:MERGED_ISSUER.int_value := l_int_value;
Any help?
thx

Hello Ken,
you can set an initial value for a poplist with the copy command.
You could use a procedure like this:
PROCEDURE P_FILL_LBX
     lbx_ITEM_IN                 VARCHAR2,
     grp_DATA_GROUP_IN VARCHAR2,
     flg_DEL_NULL              BOOLEAN,
     str_WERT_IN               VARCHAR2
) IS
ERROR_ID NUMBER;
BEGIN
CLEAR_LIST(lbx_ITEM_IN);
ERROR_ID := populate_group(grp_DATA_GROUP_IN);
populate_list(lbx_ITEM_IN,grp_DATA_GROUP_IN);
IF flg_DEL_NULL = TRUE THEN
    DELETE_LIST_ELEMENT(lbx_ITEM_IN,GET_LIST_ELEMENT_COUNT(lbx_ITEM_IN));
END IF;
IF str_WERT_IN IS NOT NULL THEN
    COPY(str_WERT_IN,''||lbx_ITEM_IN||'');
END IF;
END;Bernd

How to set the LOV value programmatically?

Hello,
I have a LOV (select list with submit) the value (displayed and corresponding returned) of which I would like to set by selecting a row in a report.
What is the event I use to catch the selection of the row in the report and what would be the sample code to set the LOV values?
Thanks a lot!
Gabor

Perhaps a more detailed explanation of the issue helps:
I am developing an online internet bookmarking application. It basically contains a folder tree and bookmarks within the folders.
The folder tree is implemented by a table referencing itself (main columns are: ID, NAME, PARENT_ID).
The LOV lists the NAMEs (actually, the full path of each folder as returned by a function) and returns the IDs.
When the user selects a NAME, folders and bookmarks contained in that folder are listed in a report (non-recursively).
The action of the user clicking a folder in the report should simulate the above as if they selected the name manually. This is where I need help!
I hope this helps. Thanks!
Gabor

[svn:osmf:] 13942: 1. Set the default value of _manualSwitchMode back to false

Revision: 13942
Revision: 13942
Author:   [email protected]
Date:     2010-02-02 13:02:47 -0800 (Tue, 02 Feb 2010)
Log Message:
1. Set the default value of _manualSwitchMode back to false
2. Remove the setter of client property and change relevant methods/properties.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as

i have tried this but this is not working.
follwing code working for Null case not for False
vcr.setAttribute("Marked","is null"); this code display all rows who has null but when i checked any row and then unchecked so that row get value "false" also not display.

Cannot set the default value of an item in the detailed table

Hi,
I have Master-Detail group, both are Table formats.
I need to set the default value of an item in the details row to the value of an item in the selected row in the Master table.
I tried Default Display Value=#{row.MasterItem}, but it seems it is trying to access current details row instead of the Master.
I tried #{bindings.MasterGroupColumnName.inputValue}, but it does not work.
Any ideas
Thanks in advance
Mohamed

I think I now what I'm doing differently, I had the "New Rows" JHS property of the detailed table group "empty" instead of the default "2" value.
It seems that "Default Display Value" expression works only for the new records specified in the "New Rows" property. But when I try to "Add" new record using the "Add Row" button, the new record inserted does not have the default values generated, only has values populated for the items of the FK (in the view link) but not the ones set through the property.
I guess in a nutshell, how I can get the details item to behave like the FK columns?
Thanks much
Mohamed

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Setting the selectOneChoice value at runtime

Similar Messages

Maybe you are looking for