Setting up a Resource Based Calendar with Multiple Permissions

Using SharePoint 2010 we're trying to schedule multiple conference rooms in a single calendar using calendar resources as described here: office.microsoft.com/en-us/sharepoint-server-help/enable-reservation-of-resources-in-a-calendar-HA101810595 (dot) aspx
Our requirements are that most of the conference rooms (resources) may be scheduled by anyone, but two of the rooms may only be scheduled by some users (a different set of users for each room...three sets of permissions).
I suspect there is no way to articulate permissions for different resources, all coming from the same resource list, and I can not figure out how to create more than one resource list per subweb. My solution has been to create two subwebs, one for each of
the restricted calendars, and have three different calendars which I'm trying to conceal to some degree from the user by making everything look the same, having the same navigational structure everywhere, etc.
A near-requirement (strongly desired but not absolutely required) is for a master view of all the conference room schedules. Not sure how I'm going to do this yet.
Questions are:
Is there a way to assign different permissions to different resources?
Is there a way to establish more than one resource list for this type of calendar within a single subweb, and if so, how do you assign different calendars to different lists?
With the approach I've taken, is there a way to combine my three calendars into a single calendar (ideally) or a single "schedule" that users may use to see which conference rooms might be open for a desired date/time?
Thanks in advance.

Hi,
In workflow, use impersonation step. It will help you decide who can view or edit this document.
You can refer these link to know how impersonation step works:
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=91 
http://www.learningsharepoint.com/2010/07/31/impersonation-in-sharepoint-designer-2010-workflow/

Similar Messages

  • Where/ how do I set SNP to create Planned orders with multiple line items?

    Hi
    Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
    Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
    Thanx
    Keegan

    Hi Keegan,
                   In SNP (APO) it is not possible to create order with multiple line items.
    But you can do some settings so that while planning system can do aggregation and disaggregation.
    But your requirment should be set on Aggregation/Dis-aggregation logic.
    Please follow the follwing links:
    http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
    Aggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
    Disaggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
    Please be sure that the setting of this logic will be at planning area level.
    You can't change aggregation/disaggregation logic further.
    Regards,
    Santosh

  • How to set default email address for contact with multiple addresses.

    Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
    Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
    Thanks
    Denis

    Thanks for the reply, buy I have no idea what this means.
    I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
    Apologies for not quite understanding the first reply.

  • How to track calendars with multiple devices apple and droid

    I have a iPhone 5 and iPad but would like to find a way to communicate my calendar with others using apple and droid products. How would I do that?

    Sync your calendar with iCloud, then share it publically as explained here: http://help.apple.com/icloud/#/mm6b1a9479.  This allows non-iCloud users to view the calendar (but not edit it).

  • Calendars with differing permissions

    I am setting up Mountain Lion Server and wish to set up a series of calendars to be used by a studio of approx 20 people - two calendars will show the kind of thing I'm trying to achieve.
    Calendar A shows appointments and meetings - it can be viewd and edited by all
    Calendar B shows who is taking leave and when - it can be viewed by all, but edited by only a small group of people
    What is the best way to set this up? On The earlier version of the server we had set up calendars on the server and delegated - this is not possible on Mountain Lion Server.

    (reposted under the heading "How to set a shared calendar 'read only' for SOME users in ML server" for better clarity)

  • I need a calendar with multiple alert times for events; Advice please?

    1. I need to be able to set multiple alert times (e.g. 24 hours before, and 2 hours before)
    2. I need a good clear Month view, with text that can be enlarged (I am disabled)
    3. It needs to sync with standard iCloud calendar data (I use Week Calendar on my iPhone and iPad - great!)
    4. I do not want BusyCal, thanks (the developer point-blank refuses to fix the Alarm window to remember it's width, and refuses point-blank to wrap the alarm title text onto two line when it is long - although they do wrap text in the calendar itself, just not in the alarm window, go figure)

    Hey I have same problem. No PCMCIA No PCIe No USB converter are usefull
    I recommend you to use IBM Thinkpad Laptop with DockStation (adv Mini Dock 2504-10U)
    This Dock Sattion have real RS232 port

  • How to sync 'On My Mac' calendar with multiple devices

    Hi
    This is an ongoing problem for me and I have decided to become more pro-active in seeking a solution. I would be grateful for any help whatsoever.
    In summary, I need to understand how I can sync calendars that are 'On My Mac' with iCloud, so that then I can see them on any of my devices. I don't mean export - I am looking for a solution that creates a constant, updating feed.
    I cannot use iCal as my primary calendar location. I need to send a lot of calendar invitations to people who use MS Outlook for their calendars and MS Outlook does not accept invitations from iCal. Therefore I have migrated to Outlook for Mac 2011 as my principle calendar client. (A temporary work around was that I continued using iCal for a short while but send invitations using Gmail. This works, except that for my clients it became confusing and they started thinking that my main email address was a Gmail address and that is a problem for me.) So I am using Outlook for Mac 2011 which enables me to exchange calendar appointments with other MS Outlook users with no problem. At this stage these appointments don't show up anywhere except in Outlook for Mac 2011 on my iMac at home and I am hardly ever there. So I need them to reveal themselves on my Macbook Air, iPhone 4S and iPad as I drive around meeting everyone. The problem is made worse by the fact that I work for several companies, all of which expect me to use their own email accounts to set up these meetings. Outlook for Mac 2011 is good for that. So the next step for me is to go to Preferences in Outlook for Mac 2011 and select Sync Services. This helps because it sets up an instantaneous feed from Outlook for Mac 2011 to iCal on the same machine. Great, but not perfect as they are all stuck in the 'On My Mac' section of iCal - which does not sync with iCloud.
    That is where I get stuck.
    Can anyone help?
    With best wishes,
    Tom

    Hi Snozdop,
    Thank you for your quick and helpful reply. Yes it does seem astonishing that Microsoft is not helping with a problem that must be affecting many of their customers.
    Actually pretty much all the appointments are already in iCloud as I exported them to Outlook for Mac as part of this recent burst of activity. So populating iCloud again will not be a problem, if I need to.
    It is helpful that you have referred to Exchange. If I am hearing you correctly then you are saying that any appointments that I set up using email accounts that use Exchange can easily be set up to show on all of my devices. This means that if I set them up using Outlook for Mac, then I will not need to use Sync Services in Outlook for Mac to inform iCloud of my schedule.
    But if I am also hearing you correctly, I will still need to use Outlook for Mac to set up the appointments because other people's Outlook systems will still not recognise calendar invitations sent from iCal, even if the email address used to set them up uses Exchange. Is that correct?
    If so, then I suppose I can work with it - although it still seems somewhat elaborate. I would be using Outlook on my iMac and Macbook Air and iCal/iCloud on my iPhone and iPad - all connected via separate accounts using Exchange.

  • Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

    I'm using RoboHelp 9 with WebHelp output.
    I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
    I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
    Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
    If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
    If RH supports multiple browse sequences, what is the workflow?
    I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
    Carol

    Me again, Carol
    You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
    I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
    The behavior of Browse Sequences as explained above
    The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
    As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
    As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
    Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
    John Daigle
    Adobe Certified RoboHelp and Captivate Instructor
    Evergreen, Colorado
    www.showmethedemo.com

  • Can I have calendar alerts for only one calendar with multiple calendars?

    My wife has multiple calendars on her iPhone (mine and hers), but she would like to receive alerts/notifications only for the items on her calendar. Is this possible? (This seems to be the opposite problem from what this person experienced: http://discussions.apple.com/thread.jspa?messageID=8479193.)
    We sync with Outlook on a PC via iTunes.

    I have the very same problem. In our company, we have shared CalDAV calendars for every employee. I receive and sync those to my Mac and to my iPhone/iPod Touch; on both platforms I only want alerts for my personal appointments, and not to get alerted when my colleagues have a business lunch.
    Interestingly, in iCal on Mac OS X, there is an option "Ignore Alarms" for every single shared calendar, and I can cherry-pick those that I want to get alerted about. This is exactly the behavior I want on the iPhone, too, which regrettably is not possible (yet?).
    The other option would be to forbid alarms in shared calendars for everybody, which is not feasible, too, because people might want to get alarms without having to duplicate the date to some personal calendar first.
    So if anyone has a practical solution to this problem, I'd be happy to hear about it. Thanks!
    --Alex.

  • Date based report with multiple record return

    Hello all,
       Here is the situation. Running MAS 4.1 and using Crystal 10 for doing reports. I currently have a custom report that shows all invoices that have been paid for any given date range. This works great except when there is a "credit Memo" against an invoice. The way I'm getting all paid invoices is via a formula. The record set I have to pull against lists the invoice amount, date paid and amount paid. Simple calculation on the returned record will tell you if it has been paid off or not. The problem I'm having is those invoice records that also have a credit memo against them. The credit memo entries do not have a "paid date" and since that is my main selection criteria those records will not pull into my report, and therefor those invoices will not be showed as being paid. What I need to happen (and I don't know how to do it). Is for the report to run based upon the date range specified, and pull in related records even if there is no "paid date" on them. The way MAS stores it's invoice/credit memo records is the same for both. The main difference is that invoice has the "type" field set to "IN" and a credit memo has the "type" field set to "CM". So the actual "invoice number" is the same for both kinds of records. I hope my request makes sense, if not let me know and I will try to explain what does not make sense.  Thanks in advance.  Bill

    Jason,
        You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
    I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned  based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think?  I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
    Thanks.  Bill

  • Setting up my Airport Extreme properly with multiple routers on a home network

    I have a 4 bedroom house that over the years has had router after router added in different rooms. I recently bought an airport extreme and an airport express as I am getting sick of not being able to network everything as well as to have one strong wifi.
    So I have set up the Extreme in my office and the express at the far end of the house and it's doing wonders in boosting the wireless signal. This is what I am trying to solve:
    How do I make all the wired routers apart of my wired and wireless network? The router/modem that was installed by Verizon obviously should stay. I read in another forum that NAT should be turned on and all other routers shouldn't but would be bridged. I logged into the admin settings for the router and couldn't find any place to change this.
    As you can tell, I am no IT. So I am sure this may all be confusing. My ultimate goal is to have a shared hard drive on my airport extreme and shared printer on my express and all computers on the same network, communicating to each other. Currently I have 3 routers + airport extreme and express all connected.
    Hope someone has the patients to help me out.
    Thanks.

    Good diagram!
    In that case you definitely want the D-Link to act as a switch, and its manual describes how to do it:
    (page 10)
    Connect to Another Router
    If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:
    Disable UPnPTM
    Disable DHCP
    Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router.
    To connect to another router, please follow the steps below:
    Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer.
    Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log In to continue.
    Click on Advanced and then click Advanced Network. Uncheck the Enable UPnP checkbox. Click Save Settings to continue.
    Click Setup and then click Network Settings. Uncheck the Enable DHCP Server server checkbox. Click Save Settings to continue.
    Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer’s IP settings back to the original values as in Step 1.
    Disconnect the Ethernet cable from the router and reconnect your computer to your network.
    Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router.
    You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network.
    While reading the above bear in mind the Verizon box is your router. Don't overlook any of the details in these instructions - read all of it and understand its implications. If I were doing it the first thing I'd want to know is how to reset the DIR-601 to factory defaults since I'd be sure to muck it up about a dozen times before getting it right.
    It sounds as though your Express is configured correctly. It is providing a wireless access point for your wired network, the one created by your Verizon router.
    The optimal configuration for this design is to configure the Express to create a network using the exact same wireless network name and password as the one created by your Verizon router, otherwise you will have two wireless networks. Leave its "channel" on "automatic" so it won't conflict with whatever the Verizon is using.
    It will look a little like this:
    I'm assuming some of your devices still need 802.11g so the "radio mode" will most likely need to be b/g compatible.
    When everything is up and running, experiment with the wireless transmitter power for the Verizon router as well as the Express. It's best to use the least amount that will work for you, so as not to create needless wireless interference for everyone else. This also minimizes the possibility of people piggybacking on - or trying to hack into - your wireless network.
    As far as getting your Windows computer to see your external HD, I haven't a clue. I'm sure it's possible but I'm not a Windows expert.

  • Resource Gantt Chart with Multiple Series (Apex 4.1.1)

    Hi,
    I am building a resource gantt and I want to show different types of entry in different colours.
    My series query is:
    select null,
    time_record_id,
    username,
    null,
    to_timestamp(to_char(event_date + (start_time/24),'YYYY-MM-DD HH24:MI'),'YYYY-MM-DD HH24:MI') start_date,
    to_timestamp(to_char(event_date + (end_time /24),'YYYY-MM-DD HH24:MI'),'YYYY-MM-DD HH24:MI') end_date
    from
    oly_time_record
    where
    work_code = 'OFFICE'
    order by 5, 3;which works well to show me the times when a user is going to be in the OFFICE.
    I now want to add additional bars to the chart that shows me the times that a user is going to be 'WORKFROMHOME'.
    The 'OFFICE' time should show Green bars and the 'WORKFROMHOME' should show Red Bars.
    This is quite easy on normal charts, where you can add extra series but the Resource Gantt does not seem to allow more than one series.
    Does anyone have any ideas about how I can get what I need?
    Thanks,
    Martin

    Hi Martin,
    there are a lot of examples of gantt charts in this forum.
    Take a look here:
    http://apex.oracle.com/pls/apex/f?p=36648:60
    Markus

  • How do I set up a swept sine vi with multiple response channels?

    I'm using a Compact PXI, the PXI-1002. I'm trying to setup a swept sine program that can acquire more than one response channel simultaneously. Is there an easy way to do this? or do I have to modify the SVT swept sine vi's to accommodate acquiring more channels?
    - Adam Cissell

    Welcome to the discussions, CassC.
    You may need to re-post in the pre-Tiger mail forum.
    But what I THINK you need to do is use your Address Book, and make a group. Add to the group (by selecting, dragging and dropping) the contacts you need in the distribution list. Now in Mail use the name of the group in the To: or Cc: or Bcc: field to send them all mail.
    AK

  • How To Create An SMS Flash Based Chat with Multiple Usersfor Website

    I have a site, that will need messaging service for up to
    four people at a time. All users are part of a database in mysql. I
    want to use my database to extend the usage of the site to live
    chat. Does anyone know how to start and where to go find out how to
    start, so far in flash I have textfield and input field but how to
    connect is beyond me right now. Please help.

    Have a look
    Here

  • Unable to open/edit shared calendar with Editor permissions

    I have created an account, and have shared the calendar to the entire office. Some of the individuals have either been unable to accept the invite as it says "The folder you selected is not available". Some can view the calendar, but are unable
    to create appointments. Their addresses are set as Editor, but it continues to give this error.
    Is there something I am missing?

    Hi,
    If these users are working in Outlook Cached Mode, please let them switch to Outlook Online Mode to check the result. If the function works fine in Online Mode, removing and re-adding the calendar may help since it seems to be a cache issue.
    If the issue persists, could you please detail this scenario a little bit? I've seen Office 365 users used to meet this issue and it was resolved by installing an update:
    Outlook 2013 The folder you selected is not available
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for