Setting up a sequence - newbie

I am new to oracle and using 9i, how does one set up a sequence for a column using the windows interface?
Thanks

To use GUI tool you will need to install OEM that comes with the server release.

Similar Messages

In/out markers being set in the sequence instead of source clip

Here's what's happening:
1) I open a clip in the source monitor
2) I set the in/out points of a subclip and drag it to the timeline, no problem
3) I scroll around in the source monitor, finding a new clip
4) I hit in/out and try to drag the clip from the source monitor
5) The original clip is dragged over and I notice that the in/out points were set on my sequence instead of my source monitor.
The issue seems to be that focus doesn't follow the mouse intuitively? The focused/highlighted window remains the sequence even if I'm actively scrolling around in the source monitor and even if I hit in/out keys while the cursor is in the source monitor window -- the only way I can get the source monitor to be the focus is if I explicitly click on it.
I've only recently upgraded after some time over in FCP-land, but I feel as though this didn't seem to happen to me in previous versions of Premiere. Is there a preference or anything I can do to enable this to work? Many thanks in advance if anyone has ideas.
I'm on OS X Mountain Lion.

the only way I can get the source monitor to be the focus is if I explicitly click on it.
That's normal. If you want to keep focus on the Source Monitor, use the Insert or Overlay Edit commands instead of dragging.

Setting Up A Sequence For AVCHD

I'm using FCP 5.1.4 and Mac OS 10.5.4. I was sent some video that I was told was AVCHD. This is the first time I've worked with this kind of video (normally I just have MiniDV). When I open the video in QuickTime Pro it says it is Apple Intermediate Codec, 960px by 540px and 29.97fps. I'd like to work on this in FCP and set up a Sequence so that I'm not constantly having to render the video. So, I set up a sequence using:
Frame size: 960 x540 Custom (16:9)
Pixel Aspect Ratio: HD (960x720)
Compressor: Apple Intermediate Codec
However, the video still needs to be rendered when I put it into the Sequence. And additionally, the size is 1280x540 (black bars at the side), not the 960x540 I set in the Sequence.
Any help setting up a sequence that will accept the video without needing to be rendered and make the video the exact same size it currently is would be greatly appreciated. Thank you very much.

FCP doesn't edit AVCHD media. It gets converted using log and transfer to QuickTime using a codec you can select, ProRes, LT, or AIC. Your sequence settings should exactly match the format you convert the media to. AVCHD can be either 1440x1080 or 1920x1080.

Any suggestions on setting up polling sequence in lookout 4.5?

I have noticed that lookout does not handle polling of radio telemetry units, if you set up each modbus object to poll at a certain time each RTU will poll at the time interval, but not in sequence right after each other, meaning if unit 1 polls and is received, unit 2 will poll when its time interal expires, not immediately after unit 1. I have set up (1)timer for all units but each modbus object will start its countdown from the time it is tagged to timer. any ideas? This becomes a problem when there is 20 plus units, time becomes a factor for timely polls and data posting. Thanks

Paul, this is a very similar application to what I frequently use. Our approach is to have a master RTU talking to each of the slaves and then the front end PC only talks to the master. I realize this doesn't answer your question on making Lookout poll, but it is how we set our systems up.

Javascript set date function sequence issue

This is a javascript date error that occurs in FireFox, Chrome and IE.
In setting the date using utc functions the order in which the functions are used can cause the wrong date set be set.
var d = new Date();
d.setUTCFullYear(2012,1,26);
correctly sets the date:
Sun Feb 26 2012 10:10:33 GMT-0500 (Eastern Standard Time)
var d = new Date();
d.setUTCFullYear( 2012 );
d.setUTCMonth( 1 );
d.setUTCDate( 26 );
incorrectly sets the date:
Mon Mar 26 2012 11:10:33 GMT-0400 (Eastern Daylight Time)
var d = new Date();
d.setUTCDate( 26 );
d.setUTCMonth( 1 );
d.setUTCFullYear( 2012 );
correctly sets the date:
Sun Feb 26 2012 10:10:33 GMT-0500 (Eastern Standard Time)
It appears the full date isn't being used to re-validate/calc the date upon setting single utc parms.
Thanks.
This happens Windows 7, NOOK...

Short answer; no, doesn't happen Apr 1.
<br/>Longer answer; I set up a page to loop through everyday of a given month.
<br/>(http://itriware.com/lab/test/datetest.html)
<br/>Changing the machine date results in:
* md:30-Mar - no good for the month of Feb.
* md:31-Mar - no good for the months: Feb, Apr, Jun, Sep, Nov.
* md:01-Apr - ok
* md:30-Apr - no good for the month of Feb.
* md:31-May - no good for the months: Feb, Apr, Jun, Sep, Nov.
(md=machine date)
Seems to be an end of the month issue, depending on the sequence of setting the utc parms, the month rolls over but isn't adjusted back when setting the next parm...sometimes.
After thinking about it;
Seems that if the machine day of month is greater than the # of days in the requested month it fails, hence feb always fails and only requested months with 30 days fail when the machine date is the 31st. In the sequence setUTCFullYear, setUTCMonth, setUTCDate.

Timeout setting for Realtime-Sequence execution

Hello,
I'm referring to the "Timeout" setting in the stimulus profile editor or the "Timeout" parameter of the SequenceCallInfo Constructor. The description of this parameter is as follows:
The timeout in milliseconds within which the sequence must complete each time step.
What exactly is this parameter good for? I understand that each task in a realtime sequence is executed once per PCL iteration and that the "time step" of a task is completed when the control flow reaches a "Yield" statement (or the end of a loop with autoyield enabled).
When I'm running a sequence where a timestep takes longer than the PCL period, the VeriStand engine will abort and undeploy the system definition. In my case the PCL rate is 2KHz so isn't the timeout implicitly given as 500us?
I thought that maybe I can use the timeout parameter to set an additional timeconstraint from "greater 0 to less than PCL period". So for example if I set it to 0,1ms, the realtime sequence would have to hit a Yield statement within 100us. But this doesn't seem to be the case either because the realtime sequence is not aborted and it still stops the VeriStand engine.
Thanks
Krid

Hi Jarrod,
thanks for your answer but your second use case is exactly what I tried to do. The VeriStand engine is still aborted even when I run the sequence with timeout set to 0,01:
Error -307743 occurred at NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> HP Loop.lvlib:HP Loop Main.vi
I just tested it again and the first time I started the stimulus profile, the realtime sequence actually was aborted and the VeriStand engine continued to run. Then I started the stimulus profile a second time (without changing anything) and this time the profile was not aborted and hence the VeriStand engine was stopped. It's also not possible to stop the profile in stimulus profile editor. It just hangs and I have to kill it.
After this happened it's also not possible to run any other realtime sequences (they will simply not start but no error message is returned). One has to completely close down VeriStand (just re-deploying doesn't work) and restart it before it works again.
Why isn't the timeout parameter working as it's supposed to?
Regards
Krid

Setting Timer to Sequence Structure

Hi,
I'm currently designing a VI that perform analog data acquistion. How do I actually set a timer to each sequence so that they can run within stipulated time??

One of the easiest ways is to use the "Wait until Next millisecond" VI. Just place it in one of your sequences and program control will wait that long to execute the next sequence.
J.R. Allen

My apple TV will not show my iPhotos travel photos in sequence. I set up a sequence of photos that STAY in sequence when viewing in iPhoto on my iMac, but they do not show in sequence when my Apple TV shows them on my TV screen. My Apple TV is MC 572C/A

My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug May

I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Help to get from video to sequence (newbie - Print person learning video)

I have .vob video files I am bringing into iSquint and converting to .mp4. I then bring that into MPEG Streamclip and have tried many different conversions. I bring them into FCE HD 3.5.1. The video pane plays the file, but when I drag & drop the file into the "Sequence 1" pane they either play the video with no sound, don't show the video at all, show as "undrendered". I am working from .vob files that are recorded at church, from the preacher and I am volunteering to post these online through Vimeo, but I can't seem to get them to work in FCE. I have never used FCE before, but know that I can learn new things. I just can't seem to figure out what settings it is to use to get them in. They are also wanting me to add the preaching points as the preaching happens via text on the screen and it seems like that can be done in FCE. I really need help. Thank you for reading this and posting anything back. I have read post after post in different areas and have tried so much, but keep running into a brick wall on my end.

Thank you so much. You are such a big help. I kept trying to figure out where I knew your name from and it is from some of your help FCE videos I watched on youtube. Wow, you are such a help.
I am converting it now under those settings you gave to me. Although, I couldn't find where the 29.97 was so I typed it in and assume that was right.
I have been working on this since last Monday on and off. I bet I have put in more than 20 hours and still without success. Your help really means a lot to me.
I am use to imovie and just dropping in there and working from there. FCE is so intense for me. I really don't understand "sequence" either.
I have 2 .vob files that I need to convert and bring in to merge together to play as one piece. Is that why there is a "sequence" 1 or 2, etc. or is it like imovie and will all drop into the same timeline and work from there? I have to delete the first 20 seconds of video too and can easily do that in imovie is it easy in FCE too? Then I want to go and add the text to it as he is preaching to give the Scripture reference and points as he preaches. I have read so many places to do that in Photoshop and save as a .psd and bring it into FCE. Is that true or would it be easier to try to learn it in FCE? Thank you!

Copy setting to new sequence

I'm working on an HD project and when I copy the sequence and paste it in a new sequence where do make it the same settings? I went to settings and it looks like they are the same.

1) It's only been a few hours. Calm yourself.
2) You hardly gave any information to work off of. "HD sequence"? What kind of HD? What do you mean "copy the sequence and paste it in a new sequence"? Are you taking about nesting, or just duplicating clips? "I went to settings" is not quite a sentence.

Set party number sequence with a specific value

Hi all,
I have a requirement to start the customer party number sequence from a specific number, so whenever a new customer is created the party number will be above a certain value. Any suggestions on how I can do that?
Thanks, Mike.

Thanks for the feedback. I got it with following SQL statements to start from 700000.
alter sequence ar.HZ_PARTY_NUMBER_S increment by 700000 ;
select HZ_PARTY_NUMBER_S.nextval from dual ;
alter sequence ar.HZ_PARTY_NUMBER_S increment by 1 ;

PP6 Multiple tracks output setting & why MATCH SEQUENCE SETTINGS isn't seeming to work correctly!!

First... can you change a active timeline from stereo to mulititrack 16 channels for instance without creating a new sequence and pasting old sequence into new one.
Also, watch this video...
16 channels of audio... great... try to match sequence settings it changes from 16 channels to stereo. Um... what's happening there???? How do we fix that?
http://youtu.be/EslOPTRk79E

Jim, this is the best place for Mike to post.
This is where the Premiere Pro engineers, testers, and product managers will see questions. It's extremely cumbersome to try to forward a tweet to the relevant expert, and it's even worse to try to troubleshoot and give answers longer than 140 characters (with screenshots) over Twitter.
That said, I'll get someone more familiar with the new audio features to have a look.

[SOLVED] How to set nautilus sort sequence?

Usually nautilus had sorted my files (acc. to name) independent if first letter is upcase or lowcase:
Now it is changed to sorting:
first all files starting with A...Z, after this a...z.
How could this changed to the former setting?
Thanks,
PS
Last edited by PS (2012-06-15 19:35:54)

I posted in a thread about this a while ago, but can't find it. If I remember correctly, it has to do with the locale variable LC_COLLATE. You can run locale to see your locale vars.
Edit: Here is the thread I was thinking of.
Last edited by alphaniner (2012-06-15 16:36:42)

Home studio set-up for a newbie

I'm just getting started in the world of digital music, and I'm hoping someone can help me set up a home studio.
Here's what I've got:
- Powerbook G4 w/ GarageBand 2
- Yamaha P-200 Electric Piano
- Roland JV-1010 64-voice synthesizer module
I don't even know what the voice synth module does. A friend left it in my garage and doesn't want it anymore. I looked it up on Roland's website but I'm not too clear on it's function.
Questions:
1. How do I get the Yamaha hooked up to my computer?
2. What do I do wih the Roland module?
3. Is there any additional equipment I need?
Thanks for your help.
Chris

Setups vary with each person. If it would help, here is my very simple set up:
Yamaha PSR520 touch sensitive keyboard ($599.00)
Behringer unpowered mixer (cost me about $69.00)
iMic Usb adapter (appr.$35.00)
MIDIsport 1x1($49.00)
Shure and Rhodes mikes. ($200-300.00)
With my set up I can record real instrument tracks or software instruments from the same keyboard:
I record on real instrument tracks:
I use the mixer to control the gain from the sound out from the keyboard and from my mikes. The iMic connects the mixer to my usb port since I have no sound in. (There have been reports of problems with the iMic in Tiger. If you have a sound in port use it.)
I use the MIDI interface to connect my keyboard via MIDI cables into Garageband to record software instruments.
Kurt

Setting up a sequence - newbie

Similar Messages

Maybe you are looking for