In/out markers being set in the sequence instead of source clip

Here's what's happening:
1) I open a clip in the source monitor
2) I set the in/out points of a subclip and drag it to the timeline, no problem
3) I scroll around in the source monitor, finding a new clip
4) I hit in/out and try to drag the clip from the source monitor
5) The original clip is dragged over and I notice that the in/out points were set on my sequence instead of my source monitor.
The issue seems to be that focus doesn't follow the mouse intuitively? The focused/highlighted window remains the sequence even if I'm actively scrolling around in the source monitor and even if I hit in/out keys while the cursor is in the source monitor window -- the only way I can get the source monitor to be the focus is if I explicitly click on it.
I've only recently upgraded after some time over in FCP-land, but I feel as though this didn't seem to happen to me in previous versions of Premiere. Is there a preference or anything I can do to enable this to work? Many thanks in advance if anyone has ideas.
I'm on OS X Mountain Lion.

the only way I can get the source monitor to be the focus is if I explicitly click on it.
That's normal. If you want to keep focus on the Source Monitor, use the Insert or Overlay Edit commands instead of dragging.

Similar Messages

QUESTION - Has anyone else recently experienced an iPhone or iPad's alarm going off by itself, without being set by the user?

Has anyone else had his/her phone alarm (on the clock app) go off by itself, without being set, and with a very weird sound?
Happened to me at 11:34 pm last night (Oct 28, 2013). I'm using an iPhone 5 with iOS 6. Sound was named something like "Orari" and sounded like a woo-woo ghostly alarm. I immediately swiped to stop the alarm and then deleted the alarm, which I had NOT set, but which seems to have set itself. The iPhone was plugged into my iMac at the time. There is no such sound on my phone or, it seems, anywhere (I Googled).
The night before, Oct 27, something similar happened to my iPad mini running iOS 6 ... also plugged in to recharge, but at a wall socket ... the sound was like a fire or smoke alarm.
I know it's Halloween week, but some of us need our sleep!
Any explanations?

Hi Littleleslie,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Silver Apple appears (up to 30 seconds). Once the Home screen comes up, double tap the Home key and make sure you don't see the Alarm app in the list of background apps. If you do, swipe up on the thumbnail for it to close it out completely.
Then all you can do is wait to see if it will let you sleep through the night!
Good luck!
Cheers,
GB

PP CS6 same settings as sequence created from source clip ...

If there is documentation on this one, let me know, I didn't see anything at a glance. I am trying to educate myself on PP CS6 and encoding when one selects same settings as sequence on export where the sequence was created from a clip. (And also just trying to understand the basics of encoding, codecs, formats, containers, etc. generally speaking.) Keep in mind I am coming from a consumer level of understanding and prior used another editor that had "smart rendering" whereby if you selected an output matching a clip it matched everything and encode only what changed. My source video in this case is from a Countour+ helmet camera unit: 1280x720, 59.94, progressive, .mov, "avc1" codec and H.264 reported by Gspot. Let me know if you need more information.
Ok so when I do an export as noted above I see PP selecting "MPEG Preview" for the format and "MPEG I-Frame" for the codec, both options grayed out. If I run gspot I get the same width, height, frame rate, etc. as the original source clips only gspot reports the format is mpeg-2. I was expecting to see the mpeg-4/h.264 like the source video. Is this result to be expected?
Secondarily, if your goal was to have a file that can play on your Sony PS3 (and a PC), what settings would you choose for export if you wanted to have the highest quality result?

Jim - you were spot-on. Here's the response from Dropcam, in case anyone else had the same issue:
You are actually correct in that the frame rate for Dropcam's video does vary depending on a few factors. The fps slows down for night vision to average out image noise and increase the image quality. The fps will also slow down when there is no motion going on in a scene to conserve bandwidth.
Thanks, Sean

Sequence playout with source clip timecodes?

What I want is actually quite simple, but it's more difficult then I thaught.
Our cameraman has shot al lot of material onto Panasonic P2 cards (and copied them on to a Harddrive). And now I need to make a rushes playout with burned in timecode. (and i don't want to render)
All the clips have timecode from itself (time of day). Is it possible to create a playout with those timecodes instead of the master sequence timecode? (a little bit like freerun) With the use a digibeta recorder to read the timecode from de rs422 port (and then crash rec on a dvdrecorder)
Anybody who can help me?
Ciao, Gideon

YOu want to output the sequence, and have the deck record the timecode that exists on the clips themselves? So that you then make a tape of all the P2 footage and retain the P2 footage TC?
Sorry, I don't know of any edit system that does that. Timeline timecode, or pre-striped TC only.
Shane

How to tell the date of a source clip (from events) in a project

I am making a very long and complex project.
I am using events from IHD and EHD.
The project has tons of clips from tons of different events spanning over 10 years.
I want to add some still pics. I want the still pics to be inserted around the same time the video was taken (i.e. my pics are sorted by date and my video clips in events are also sorted by date).
Question is:
Is there a way to see the date of the clip being used in the Project???
(The events list the clip dates, but I have so many clips in the project, that I couldn't possibly find them all using the events view).
So, I want to be able to say, this 10second portioned clip in this project was taken on April 5, 2005 for example.
Can I do this some how??
Thanks.

Thanks.
Darn it.... I didn't realize this.
I put together a 20min project so far... it is composed of many many few second clips from probably over 100 different events spanning over 10 years.... now i want to add the still pics to it..... so I guess it is a little to late for this solution ;(. I probably should have added the stills during the time I added the video clips (since it would be hard to go back to see what events the videos clips in the project came from).
I like to put all the video clips in first and then add the still pics. Then add music last.
But your tip is good to know and thanks so much again!

In Imovie I get the message that my source clip is missing so I can't work/view the project

What do I do if I get a source clip is missing message in Imovie?

Well you need to reimport the original of missing clip into iMovie.
Geoff.

How do I stop my Notes from being set to the default mail account?

I just bought an IPhone 5s and I'm loving it except.... Every time I create a new Note or change an existing Note, the Note shows up in my Outlook Inbox as an email. How do I stop this from happening? Thx

Thank you. What is the difference when I log into my mail, prefereces, accounts, allow notes in inbox and click No. Nothing seemed to happen when I did that. Thank you. I am such an amateur

Timed Out , OK i wanna instal the firmware instead !!

After 10 times of downloading the ios 5 .. and getting the " it's timed out " thing .. I downloaded the firmware for my iPod 4G .. I JUST CAN'T INSTALL IT ! .. I Click it and there is no changes .. HELP PLZ it been hours ..

Disable your firewall/security software and try again.

Loading the different result sets in the same sequence for the target table

Dear all,
I have 5 tables say A,B,C,D as my source and i made 3 joins P,Q,R .the result sets of these 3 joins are loading into a target table X but with 3 different targets with same table name.
I created one sequence say Y as my target table has primary key and mapped to three different targets for the same target table which i need to load.
But after deployed and executed successfully ,i am able to load the data from three join result sets with differeent sequence numbers.
I am looking to load data like this.
If First Result set P has 10 Records,SEcond Result Set Q Has 20 and the third result set has 30 records then while loading data into first target it creates the seq for the 10 records from 1..10 and while loading the data for second result set ,it creates the sequence from 11 ...20 and while loading the third target with the third result set it creates the sequence from 21 ----30.
But i am looking to load the three result sets in the sequence 1to 10 but not like creating fresh sequence for each result set.
how can we achieve this in owb?
any solution for this will be appreciated.
thank you
kumar

My design is like following
SRC1
---->Join1--------------------------->Target1( Table X)<-----Seq1
SRC2
SRC3
----> Join2----------->Target2(Table X)<----Seq1
SRC4
-----> Join3 -------> Target3(Table X)<-----Seq1
SRC5
Here the three 3 targets are for the same Table X as well sequence is same i.e seq1
If the First Join has 10 rows ,Seq1 generates sequence in 1 to 10 while loading target1
But while loading second target,Same Seq1 is generating new sequence from 11 but i am looking to load target2 and target 3 starting from sequence 1 but not from 11 or so.
As per your comments :
you want to load 3 sources to one target with same sequence numbers?
yes
Are you doing match from the other two sources on first source by id provided by sequence (since this is the primary key of the table)?
No
can you please tell me how to approach for this?
Thank You
Kumar

Render Markers to Files OR Create Sequences From Markers

This may have been asked before, but here goes (and yes, I did a search...extensively here and google):
Is there a way to set markers within a long sequence containing begin and end times. Either automatically create multiple sequences or video files with the same name as the marker.
I need to do this because I shoot long form Church services (1.25 hours) and need to output the Worship team performances separate from the sermon prior to upload. Currently, I have to duplicate the long video 6-7 times and set the in/out times to correspond to the markers. Then rename the sequences as the markers and then import them all to Media Encoder.
Vegasaur (a plugin for Sony Vegas) has this functionality. Much quicker and easier.
Thanks.
Wally

No, I'm afraid you can't do that trick from the iPad's Safari. What I do is take a snapshot of the screen when I want to keep a record. Press the Home and Lock buttons simultaneously real quick. You should hear a click and see the screen flash blank for a second. A snapshot of the screen will then be saved to your Saved Photos album. It's almost the same as having a PDF file of the page.
Oh, and welcome to Apple Discussions!

How do I disable the setting of the jbo.ApplicationCookie

Hi,
I am using BC4J with struts and have all my action mappings set to "stateless" releasemode. A cookie is still being set with the name "jbo.ApplicationCookie" and a value of "-1".
The problem I'm having is that I'm working in an environment with mulitiple servers being loadbalanced by a hardware device, so there's no gaurantee that an individual user will land on the same server from request to request. I'm getting the error:
oracle.jbo.common.ampool.ApplicationPoolException: JBO30006: The cookie for session A50D3FE5149C50CC0280FE083D3C4866 and application AccountService is not a valid handle for application pool, AccountServiceLocal. The cookie may not be used to access this pool instance.
at oracle.jbo.common.ampool.ApplicationPoolImpl.validateSessionCookieInPool(ApplicationPoolImpl.java:2477)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2034)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:230)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:369)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:364)
at oracle.jbo.html.BC4JContext.getApplicationModule(BC4JContext.java:152)
...and so on...
can I just disable the setting of the jbo.ApplicationCookie altogether as I'm operating in stateless mode anyway??

Ok, so the long identifier appears like it might be the Tomcat session identifier, which may very well be timed out as we have our session timeout parameter set very low. However, why should this foul up the Application Module pool when I'm running in "Stateless" mode?..Seems like an unnecessary dependency.
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30006: The cookie for session 1A6D244B9C1E0EBA88A2FDF8DAB2957E and application AccountService is not a valid handle for application pool, AccountServiceLocal. The cookie may not be used to access this pool instance.
at oracle.jbo.common.ampool.ApplicationPoolImpl.validateSessionCookieInPool(ApplicationPoolImpl.java:2477)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2034)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:230)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:369)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:364)
at oracle.jbo.html.BC4JContext.getApplicationModule(BC4JContext.java:152)

How do I set up the printer default so that it prints black only, with all my devices and iMac

Have an Officejet 8600 Plus, used with an iMac. Also using wireless feature to print from iPads and iPhones. The printer has been setup from the iMac to print using the black ink cartridge, only. The problem is with my devices. I am unable to figure out how to set up the printer to print in black when I print from my devices. Is there a solution to this?

Hi symo46, welcome to the HP Forums. I understand you are trying to determine how to print with black ink only from your iPad. As you may have experienced using Airprint you will not have any options other than number of copies, however the HP ePrint App may have the option you are looking for.
When printing from the HP ePrint App, if you are printing Office documents or PDFs you can use black ink only.
Getting Started with ePrint
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

SSL_CLIENT_S_DN not being set

Oracle 11g
Application Express 3.2.0.00.27
SSL_CLIENT_S_DN not being set if the user has "Use TLS 1.1" or "Use TLS 1.2" checked in Internet Explorer Advanced Settings.
We are using mod_ossl, are there any updates to this module that would fix the above?

Any updates on this?
Appears that the latest release of OpenSSL supports TLS 1.2, any changes there will be an update to mod_ossl?
Seems to be happening more and more that users have all Internet Explorer TLS settings checked and run into a problem getting to the Application Express site unless I tell them to only have TLS 1.0 checked.

Error in commitment update. Status is being set.

HI Experts,
I have this error during sales order creation
"Error in commitment update. Status is being set. The order cannot be delivered/billed."
The system here FMderive to get commitment item.
Is there any missing FI in the SO?
THanks.
Regards,
Clarice

Check and maintain the following settings:
All accounts the system finds in the SD sales order must be supplied with an existing commitment item.
The funds center and the funds must either be entered in the account assignment panel of the SD sales order or they must be derived.
For detail refer SAP Note 418471 - V1331 (Item & does not exist) / Funds Management.
Thanks & Regards
JP

Why does Premiere only let me put audio in the sequence?

I have a few videos taken with iPhones that I have used Media Encoder to make 100% certain they are compatable with Premiere. I have even edited these videos using different projects and exporting them also to make sure they are compatible. When I make a new project to edit these videos together, something messes up. I am able to import the first video and put it in the sequence and everything works fine. I then import the second video and everything looks fine till I try to add it to the sequence, it only shows up as audio when adding to the sequence. Both videos have audio and video when watching them in QuickTime and when watching the preview in Premiere. Any ideas as to what is causing this and how to fix it?

If you're on PPro CC, then check whether Source Patching is enabled for a video track. If not, that would explain why only audio is being inserted in the sequence.

In/out markers being set in the sequence instead of source clip

Similar Messages

Maybe you are looking for