Setting up accounts

I have a mobilme account. Inquiring if two separate websites (different domains) can be set up on one account. If not, can I use the disk I purchased for my mobileme account be used to set up the second account.
Big Al

Welcome to the Apple Discussions. You can have as many web sites in one MMe account as you have room on your iDisk. There are a couple of caveats to that:
1 - the site that is at the top of the list on the left hand pane in iWeb will be the one to open if you use the basic/minimal URL which is: http://web.me.com/YourMMe_AccountName/. Any other published sites will need to add the site name to the end of the basic URL:
http://web.me.com/YourMMe_Account_Name/SiteName.
2 -for multiple sites you would provide the following URLs to whomever you want to visit:
http://web.me.com/YourMMe_Account_Name/Site1/ and
http://web.me.com/YourMMe_Account_Name/Site1/
The MMe disk is good only for one account. If you already have an account setup you won't need that disk.
OT

Similar Messages

  • HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    The iPhone has a feature called "Activation Lock" described here:
    http://support.apple.com/kb/PH13695
    Without that Apple ID, you will not be able to use that iPhone.

  • Business area is not Populated in Set off account During MIRO.

    Hi All,
         I have some issue in MIRO. I have Service tax set off account. When i do MIRO Business area is updated in Vendor Line item, Provisional Items and even in Withholding TAX line item(TDS) but System does not show Business area in SERVICE TAX SET OFF line item.More over , when i see the document in FB03 , in Entry view no business area is there for SERVICE TAX SET OFF  but When i see the GENERAL LEDGER view business is there.
    Screen shots :
    Entry View :
    General Ledger View :
    please help.
    Thanks,
    Karandeep bhagat.

    Hi Mukhthar ,
            Thanks for quick response.
           I have define the substitution as :
    Prerequisite :
    Company Code = 'XXXX' AND Tcode = 'MIRO' AND Document Type = 'RE' (For MIRO) AND Plant = 'XXXX' AND G/L Account = 'XXXXXXX' ( SET OFF ACCOUNT)
    Substitute:
    Business area = 'XXXX'
    But it doesn't work.
    Please suggest.
    Thanks,
    Karandeep Bhagat.

  • HT4157 I just got an iPad 16GB+3G. When I try to set up a cellular data account (settings cellular data view account) it wants the login info and password,which I don't have because I have yet to set up the account. How do I get to a "set up account" scre

    I have a new iPad2 16GB+3G. ( Only got this yesterday.)  I have set up a wireless router so am able to use WiFi at home. When I attempt to set up a cellular data connection (ATT) I get to the "view account" which asks for my login ID and password, which of course I do not have yet because I haven't set up an account yet. How do I get to a "set up account" screen?

    I'm taking that this is a used iPad. Have you removed the microSIM and got one of your own?
    Also, have you cleared it out with Settings > General > Reset > Erase All Content and Settings?
    And if that does not work you may need to contact the cell provider.

  • Unable to set up account in Mail

    I have a problem with setting up a POP account in Mail. During the account setup Mail states there is a problem with the user name or password and refuses to work however I know both are correct.
    The same account works fine on 2 other Macs running Mail with exactly the same settings.
    And on the machine where Mail doesn't work I can telnet to port 110 and login into the POP account no problem. I can also set up Entrourage to work with the same account on the same machine.
    And final point is that the email account is for a client and I run the POP server and there are no messages in the log files on the server about failed or attempted logins from this user. I know Mail is connecting to the server since if I put an incorrect user name or password during the setup I get an error on the server.
    Please some ideas would be great.
    PowerBook G4   Mac OS X (10.4.7)  

    Hi Ernie,
    One other point that is relevant is that this problem is occuring on two Macs.
    In answer to your questions:
    1. Yes there are other .Mac accounts
    2. Not sure about this one but I doubt it since the client doesn't usually muck around with the fonts but they do move some Applications to a separate folder.
    3. It is the version distributed with 10.4 and all updates to 10.4.6 have been applied. I will get the client to confirm the Apple Mail version.
    4. No that is something I haven't tried. I will ask the client to try this.
    Thanks for your reply.
    Also I've jsut tried to set the account up on a Mac with Mail version 2.1 (752/752.2) and again it failed with the same error message. This Mac has nothing to do with the affected client, and I've tried this one to eliminate any problems with moved Applications or font problems. On this same machine I set the account up in Entourage and it worked no problem. The mail server is OS X Server with 10.4.
    Damian Halloran.

  • I purchased an HP8600, i am trying to set up account and it says account already exists for my email

    i am trying to set up account for new printer and HP site says email address already exits.  When I go to forgot password and enter email, HP is saying email address does not exist.

    Hope you are doing well  Bruce_Evatt;
    Do you have another HP account in existence?
    Normally when someone has this  issue, they have an existing Snapfish HP account.
    To eliminate this as the culprit let's do the following;
    1. Go to www.snapfish.com and click on "log in" at the top right.
    2. On the splash screen that comes up click on the "forgot your password"  link and submit your email.
    3. You should receive an email with a link and a temporary password.
    4. Click on the link and log in with the temp password.
    5. Change your password to something that has at least 6 characters (at least 1 of those should be a number).
    6. Go back to www.eprintcenter.com and click on Sign In.
    7. On the next screen do not put your email or password, but click on the small Snapfish below.
    8. On the splash screen that comes up log in with your email and the password you just created at Snapfish.
    This should merge your HP accounts and you should be able to log in to www.eprintcenter.com normally after that. Do not hesitate to contact me if you feel I may be of any further assistance I will do my best to help you.
    Hope this helps!
    RobertoR
    ▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Help setting up accounts and user rights for students

    hi there, we've just bought an xserve for a college classroom running 20 imac clients and me being new to the xserve and macs in general wondered if you guys can tell me the workflow for setting user accounts up and getting the students to log onto the xserve domain with their accounts. so that the xserve can give their imacs the restrcitions for their use (user rights basically) how the imacs log on has really got me stumped as with windows it does it on logging in? any help would be appreciated

    I've just realised that you have to manually remove some stuff from the classes such as reference to J2Se classes.
    How do you do this.

  • Set outgoing account based on address book group

    Hello -- I am looking for a way to automatically set the account of new outgoing messages based on the address book group membership of the email recipient. For example, a script or rule that works something like:
    If [any recipient] belongs to group [employer1] set message account [employer1];
    If [any recipient] belongs to group [employer2] set message account [employer2];
    If [any recipient] belongs to group [personal] set message account [personal];
    etc.
    Paul Berkowitz has written a very clever script to do exactly this for Entourage (see http://scriptbuilders.net/files/otheraccountx2.0.5.html) but I have been unable to locate an equivalent for Mail.app.
    I would very much appreciate any suggestions regarding where to find (or how to build) a script, automator workflow, etc. that accomplished this task.
    Thank you!
    Adam

    V.K. wrote:
    for some reason it can only script changes to messages that were initiated by apple script. At least that has been my experience. I would be VERY happy to be proved wrong on this.
    Thanks for the feedback. Assuming your point above is correct, is it possible to create a script or workflow that initiates a new outgoing email message then changes the account to something other than the default? For example, I might might disable [cmd-n] for new messages, then set up new shortcuts linked to simple scripts so that that [ctrl-cmd-A] would initiate a new message with the account set for Employer Alpha and [ctrl-cmd-b] would initiate a new message with the account set for Employer Beta. An alternative solution might be to write a script to replace the usual [cmd-n] with a simple dialogue box that forces me to make a conscious decision about the From account every time I initiate a new outgoing email message.
    My goal here is to prevent a situation in which I forget to manually switch from the default account to the correct account for an outgoing message, thus inadvertently sending email from the wrong address. Either of the solutions I described in the paragraph above would meet my needs... might one or both of these might be possible?
    Thank you again for your support,
    Adam

  • Other members of my family are able to access my ".me" e-mail account. How do I set my account so that only I am able to access that account?

    Other members of my family are able to access my ".me" e-mail account. How do I set my account so that only I am able to access that account?

    Are you sharing the same iCloud account with your family members and they all have access to the password?
    If so, that's why. iCloud accounts are not designed to be shared if you want to keep your email, contacts, calendars etc. seperate.

  • Off set gl account needed in fbl3n

    Dear experts,
    My client want view the off set gl account in fbl3n screen.is it posible? If it is posible help me.
    ex: expenses a/c Dr
          to cash a/c
    The requirement is while checking the expences gl in FBL3N
    cash a/c no also should be appeared.this is what client requirement.so plz help me.
    Thanks in advance
    Regards
    srinivas

    Dear friends,
    Thanks for your reply.But i dont have access to OSS.so plz send me the procedure to get that field in FBL3N screen.If you send the procedure that is very helpful to me.
    Thank in advance,
    Regards
    srinivas

  • ECCS Reclassification by Partner unit for a Set of Accounts

    Hello Guys,
    I want to reclassify a SET OF ACCOUNTS by Partner unit.
    Let say that I have 3 accounts and 2 partner unit for the same entity as follows:
    Entity A
    Account 1:  1000 Euros with Partner Unit a
    Account 1:    500 Euros with Partner Unit b
    Account 2: -2000 Euros with Partner Unit a
    Account 3: -1000 Euros With Partner Unit b
    SET 1: Account 1 & 2
    SET 2: Account 3
    I want the system to cumulate the values by Partner Unit for each SET OF ACCOUNTS and post the result to Account 4 if the result is a debit or to Account 5 if the result is a credit.
    Result for SET 1:
    Account 5: -1000 Euros with Partner Unit a
    Account 4:    500 Euros with Partner Unit b
    Result for SET 2:
    Account 5: -1000 Euros with Partner Unit b
    I can get this result when the source item = the trigger item but I do not manage to apply the same logic when the source item is a set of accounts...
    Could you please help me finding a solution
    Thank you in advance
    regards
    Pascal

    Agreed, change the method layout (in SEM-BCS) and it will then be easy to do.
    Edit: sorry just realised that you are in EC-CS, where I don't think you have the method layout (NB I don't have access to an EC-CS system).
    In EC-CS You have the option to "reclassify based on debit/credit signs", which you seem to have done.
    Now you need to ensure you define the triggers (your FS item set & partner) and the sources (just one FS item and partner) seperately.
    Edited by: TheScotsman on Jan 20, 2009 6:46 AM

  • Unable to set GL Account for each ItemGroup in Inventory

    Hi,
    I am Using SAP b1 2005b Patch level 27.
    I created one database with "Chart of Accounts INDIA."  then I got Default Chart of Accounts.
    I want to set GL Account for each ItemGroup in Inventory.
    How to assign the Perticular GL Account for Particular Item Group? where can i find this provision in SAP b1?
    I am trying from past 2 days, I did not get the way to assign the GL Account for each Item Group.
    Plz help me asap.
    Regards,
    Nagababu.

    Hello,
    you can set it in the module administration --> setup --> inventory --> item group --> tab accounting. But first you must define the name of item group. it is still in the same form.
    let me know if problem still persists. G'luck.
    Rgds,

  • Unable to set up account

    I have recently tried to order a book, but when I get to stage 2 of the set up account process (Enter Billing Information) the bottom of the form is off the bottom of my screen (15" monitor), and there are no scroll bars on the form. I am therefore unable to move on to step 3!
    Is there some way of reducing the size of the form? I already have 1-click set up with Apple, but iphoto still requires me to set up an account.
    Thanks
    Peter

    colbypete:
    Can you change the resolution on your monitor? If so select the highest you can and that might bring that window into full view where you can access it.
    Do you Twango?

  • How to deselect "automatically set up account" in Mail?

    I have a new Mac book Pro OS X v. 10.6.7 and I don't have the option to deselect "automatically set up account" when I set up a new account in Mail. I have therefore not the option to say which type of account I want: IMAP, POP, etc. On my old MacBook this option was available.
    Does anyone have an idea how I can still deselect this option so I can choose the type of account I really wish to have?
    Thank you for any tip

    Storminator from Lint wrote:
    hello,
    Changing from PC to Mac is a tough cookie! ...pfft...
    Anyhow, I also have the same issue as described above, only that the so called "option" button does not appear on my screen. Result: i don't seem to be able to select this IMAP.
    Any advice would be welcome (...have googled for some time, but also there: no clear indication on how to get around this issue)
    best regards,
    The Option Key
    Is right .............here, in between control and command

  • Need to set the account ID twice for CampaignManagementService?

    We're using GetCampaignsByAccountIdRequest to get the list of campaigns in an account.
    We found that we must set the account ID for the request to succeed:
    GetCampaignsByAccountIdRequest.setAccountId(AccountId);
    However, it seems it's also mandatory to set the account ID when crreating the java service stubs:
    BasicHttpBinding_ICampaignManagementServiceStub _service;
    CampaignManagementServiceLocator locator = new CampaignManagementServiceLocator();
    _namespace = locator.getServiceName().getNamespaceURI();
    _service = (BasicHttpBinding_ICampaignManagementServiceStub) locator.getBasicHttpBinding_ICampaignManagementService();
    _service.clearHeaders();
    _service.setHeader(_namespace, "CustomerAccountId", AccountId);
    Do we indeed need to set the AccountId twice as above?
    Thanks

    As a best practice you should always specify the identifier of the account being accessed in the CustomerAccountId header
    element. Some of the campaign management operations for example GetCampaignsByAccountId,
    require that you specify the account ID in the request message body, and most of them require that you specify the account ID in the CustomerAccountId header
    element.
    In a future version of the API we plan to make this more consistent, for example exclude the AccountId from the body, and only require CustomerAccountId in the header. 
    I hope this helps!

  • HT1918 when I click on the payment type it only gives me credit card options instead of the none option . Any idea how to set the account without a credit card?

    I am trying to set the account so that there is no credit card associated with it. Anyone know how to do this

    Welcome to the Apple Community.
    Open iTunes and navigate to the app store. Select a free app to download. A simple way to do this is to scroll down to the top free apps box on the right hand side, hover your mouse over the first item and click on the free button that appears when you hover over it.
    A pop up will open asking you to sign in with your Apple ID click "create new account", click continue to create your account. Check the box to accept the store terms and conditions and click continue.
    Enter your email address, password, security question, and date of birth, click continue. Now, you will be asked to provide a payment method. Note now that the last option says "none".

Maybe you are looking for