Setting up logging - last step not working for me.

Hi, All.
My setup:
Airport Extreme
G4 Gigabit Ethernet PowerMac with original Airport card
OS X 10.4.2
Here's what I've done so far:
1. In either AirPort Admin Utility entered the logging computer's IP address in the "Send Base Station Logging to" field. I entered the assigned static private IP of the G4 "10.0.1.201."
2. On the G4, I logged in with an administrator account.
3. I executed these commands in Terminal:
# sudo touch /var/log/AirPort.log
# sudo pico /etc/syslog.conf
4. I scrolled to the bottom of the file, and added this line:
local0.* /var/log/AirPort.log
I added tabs between * and / to get the text lined up with the other entries in the file.
5. I pressed Control-O, Return, and Control-X to save the file.
6. I executed this command:
# sudo pico /etc/rc
OK, this is where things go awry...
7. I tried to find this line...
/usr/sbin/syslogd -s -m 0
...using Control-W. But, there's nothing like it in /etc/rc. So, I can't continue here. I realize the last steps are:
8. And change it to:
/usr/sbin/syslogd -m 0
9. To save and close the file, press Control-O, Return, and Control-X.
10. Restart the computer.
So, it seems like I'm missing something here. Any advice is welcomed.
Thanks.
Scott

Scott -
Ran into the same problem; found this article which helped me:
http://www.afp548.com/article.php?story=20050816135035340&mode=print
In 10.4 you need to instead edit /System/Library/LaunchDaemons/com.apple.syslogd.plist and add:
<string>-u</string>
directly below:
<string>/usr/sbin/syslogd</string>
There's more detail in the article; that's the short of it.
Jonathan

Similar Messages

Lot of exceptions in kura-console.log. Tutorial not working for me

Hi David,
Well, now I have a wired connection to my pi and got kura up and running. But, my tutorial implementation did not work.
Later, I found there is a new 1.2.0 verion of kura, so I uninstalled 1.0.0 as per wiki steps and installed 1.2.0. I had the kura showing up again and deployed green house. But again, my LED and temperature sensors were not showing.
I was worried if my pi has gone bad, but I found that its giving right voltages at power pins. I checked it is reaching my sensors too.
Later, I looked into in the kura-console.log which looked huge. Here I am attaching it for reference. On face of lot of exceptions have occurred during its start up. I have no clues about it as I am getting started and did not want to deviate anywhere in the tutorial specification(all items used are brand new). Well only change is I have upgraded Kura to 1.2.0.
telnet 127.0.0.1 5002 shows
osgi> ss
"Framework is launched."
id State Bundle
0 ACTIVE org.eclipse.osgi_3.8.1.v20120830-144521
1 ACTIVE org.eclipse.equinox.cm_1.0.400.v20120522-1841
2 ACTIVE org.eclipse.equinox.common_3.6.100.v20120522-1841
3 ACTIVE org.eclipse.equinox.registry_3.5.200.v20120522-1841
4 ACTIVE org.eclipse.equinox.http.registry_1.1.200.v20120522-2049
5 ACTIVE org.eclipse.equinox.console_1.0.0.v20120522-1841
6 ACTIVE org.eclipse.equinox.ds_1.4.0.v20120522-1841
7 ACTIVE org.eclipse.equinox.event_1.2.200.v20120522-2049
8 ACTIVE org.eclipse.equinox.io_1.0.400.v20120522-2049
9 ACTIVE org.eclipse.equinox.metatype_1.2.0.v20120522-1841
10 ACTIVE org.eclipse.equinox.util_1.0.400.v20120522-2049
11 ACTIVE org.eclipse.osgi.services_3.3.100.v20120522-1822
12 ACTIVE org.eclipse.osgi.util_3.2.300.v20120522-1822
13 ACTIVE org.apache.felix.gogo.command_0.8.0.v201108120515
14 ACTIVE org.apache.felix.gogo.runtime_0.8.0.v201108120515
15 ACTIVE org.apache.felix.gogo.shell_0.8.0.v201110170705
16 ACTIVE org.knowhowlab.osgi.monitoradmin_1.0.2
17 ACTIVE org.apache.felix.dependencymanager_3.0.0
18 ACTIVE org.apache.felix.deploymentadmin_0.9.5
19 ACTIVE osgi.cmpn_4.3.0.201111022214
20 ACTIVE org.eclipse.equinox.http.jetty_3.0.0.v20120522-1841
21 ACTIVE org.eclipse.equinox.http.servlet_1.1.300.v20120522-1841
22 ACTIVE org.eclipse.jetty.continuation_8.1.3.v20120522
23 ACTIVE org.eclipse.jetty.http_8.1.3.v20120522
24 ACTIVE org.eclipse.jetty.io_8.1.3.v20120522
25 ACTIVE org.eclipse.jetty.security_8.1.3.v20120522
26 ACTIVE org.eclipse.jetty.server_8.1.3.v20120522
27 ACTIVE org.eclipse.jetty.servlet_8.1.3.v20120522
28 ACTIVE org.eclipse.jetty.util_8.1.3.v20120522
29 ACTIVE javax.servlet_3.0.0.v201112011016
30 ACTIVE org.apache.commons.fileupload_1.2.2.v20111214-1400
31 ACTIVE org.apache.commons.io_2.4.0
32 ACTIVE slf4j.api_1.6.4
Fragments=33
33 RESOLVED slf4j.log4j12_1.6.0
Master=32
34 RESOLVED log4j_1.2.17
Fragments=35
35 RESOLVED log4j.apache-log4j-extras_1.1.0
Master=34
36 ACTIVE org.json_1.0.0.v201011060100
37 ACTIVE org.eclipse.paho.client.mqttv3_1.0.1
38 ACTIVE org.hsqldb.hsqldb_2.3.0
39 ACTIVE com.google.protobuf_2.6.0
40 ACTIVE com.codeminders.hidapi_1.1.1
41 ACTIVE org.eclipse.soda.dk.comm_1.2.1
42 ACTIVE javax.usb.api_1.0.2
43 ACTIVE javax.usb.common_1.0.2
44 ACTIVE javax.usb.linux_1.0.3
45 ACTIVE jdk.dio_1.0.1
46 ACTIVE org.apache.commons.net_3.1.0.v201205071737
47 ACTIVE org.tigris.mtoolkit.iagent.rpc_3.0.0.20110411-0918
48 ACTIVE com.gwt.user_0.2.0
49 ACTIVE org.eclipse.kura.deployment.agent_1.0.2
50 ACTIVE org.eclipse.kura.api_1.0.4
51 ACTIVE org.eclipse.kura.core_1.0.4
52 ACTIVE org.eclipse.kura.core.certificates_1.0.0
53 ACTIVE org.eclipse.kura.core.cloud_1.0.4
54 ACTIVE org.eclipse.kura.core.comm_1.0.1
55 ACTIVE org.eclipse.kura.core.configuration_1.0.3
56 ACTIVE org.eclipse.kura.core.crypto_1.0.2
57 ACTIVE org.eclipse.kura.core.deployment_1.0.2
58 ACTIVE org.eclipse.kura.core.log_1.0.0
59 ACTIVE org.eclipse.kura.core.net_1.0.4
60 ACTIVE org.eclipse.kura.linux.clock_1.0.3
61 ACTIVE org.eclipse.kura.linux.command_1.0.3
62 ACTIVE org.eclipse.kura.linux.net_1.0.4
63 ACTIVE org.eclipse.kura.linux.position_1.0.3
64 ACTIVE org.eclipse.kura.linux.usb_1.0.4
65 ACTIVE org.eclipse.kura.linux.bluetooth_1.0.1
66 ACTIVE org.eclipse.kura.linux.watchdog_1.0.2
67 ACTIVE org.eclipse.kura.net.admin_1.0.4
68 ACTIVE org.eclipse.kura.web_1.0.4
69 ACTIVE org.eclipse.iot.greenhouse.coap_0.1.0.SNAPSHOT
70 ACTIVE org.eclipse.iot.greenhouse.publisher_0.1.0.SNAPSHOT
71 ACTIVE org.eclipse.iot.greenhouse.sensors_0.1.0.SNAPSHOT
72 ACTIVE org.eclipse.iot.greenhouse.sensors.raspberrypi_0.1.0.SNAPSHOT
osgi>
Please help!
regards,
Krishna

Hi David,
It worked!!
I had to follow steps as mentioned in https://learn.adafruit.com/adafruits-raspberry-pi-lesson-4-gpio-setup/configuring-i2c
I did it once and rebooted and all started to work!
Found it shared by Diego Alejandro PalmeiraFriend in this forum.
thanks,
Krishna

'Image Set' in Contacts print function not working for envelopes

I'm using 'Image Set' in Apple Contacts to insert a pic into my Christmas address labels, which works fine, but when I try to use the same function to try and print envelopes the 'set image' function will not work, and no image will appear. Ive tried quitting and restarts to no avail - any thoughts?

I used to use this to print a report:
...but it doesn't work on my Windows 7 computers. So, now I use this:
...and I'm happy again. You may be, too, if you're using Windows 7. I found this post helpful when I experienced this problem.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

"Stop on last screen" not working for videos in development app

I am testing an app I created in InDesign on my iPad. Although "stop on last page" is selected for the movies and it functions properly in the Adobe Viewer, in the development app the movies go back to the poster when they are finished. This causes major problems for the functionality of my app. What can be done to fix this?

You should ask in InDesign or maybe Touch Apps
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Hello, the 'Set As Start Page' is not working for me. Does anyone have an idea why?

My 'Set As Start Page' isn't working...does anyone know what I can do?
Thank you!!

So you have tried to set the startpage under site domains?
What is your startpage now?

HT200161 steps not working for me

When I run the first part of step 3 to add a user named jacob I get an error saying "Record was not found". But when I replace 'edit' in the command with 'add' I get some output indicating success perhaps. But then when I try to edit that user, I get "Record not Found". These steps don't seem like they work. What am I missing?

While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Setting of "opening web pages from last session"not works when open next time

In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

''setting to "open windows & tab pages from last time" does not work.''
That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

SPA3000 F/W 3.1.20(GW) last digit repetition within the dial plan is not working for gateway 0-4

H/W: SPA3000
F/W: 3.1.20(GW)
Problem: The last digit repetition within the dial plan is not working for gateway 0-4.
Line 1 Dial Plan: (****|<#,xx.<:@gw1>|1747xxxxxxxx.<:@gw1>)
Dial "17474743246#" which works for gw1.
Dial "#17474743246" which also works for gw1.
Dial "17474743246" which doesn't work and actually goes through VoIP 1 but not gw1.
It results in I have to specify a fixed number of digits for gw0-gw4 in the dial plan or it won't works. This could be very difficult for international calls.
Is there any way to specify Interdigit Short Timer with <:@gw0>?
BTW, it's strange that I have to include (****) in the dial plan to enter IVR. Without it I can't even hear any sound coming from gw1 (SIPphone). Maybe the SPA needs a factory reset. The test dial plan might look like,
S:4,(****|*xxx.|[2-9]|xxxxx|*0<:@gw1>|1747xxxxxxx<:@gw1>|1408xxxxxxx<:@gw0>|xxxxxxxxxxxxxxxxxxxx.!)
The last barring sequence "xxxxxxxxxxxxxxxxxxxx!" is to make sure the Interdigit Short Timer works after the last digit dialed otherwise the number will be transmitted immediately which is not preferred.

IMHO , if there's a need for you to include *** on the dial plan to enter the IVR menu there might be a need to reset the unit.
I believe that you can set the interdigit timer by including that on the dial plan ie: xxxxS0 just like on a hotline, i just never had a chance to try including that syntax when invoking gw0 on the dial plan , but i guess you may give it a try.

[svn] 3921: Fix for - @inheritDoc tag not working for get/ set overrides when you only override the setter of a base class

Revision: 3921
Author: [email protected]
Date: 2008-10-28 06:23:00 -0700 (Tue, 28 Oct 2008)
Log Message:
Fix for - @inheritDoc tag not working for get/set overrides when you only override the setter of a base class
QE Notes: Baselines for framework test will need to be updated.
Doc Notes: None
Reviewer: Paul
Bugs: SDK-17304
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17304
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

Revision: 3921
Author: [email protected]
Date: 2008-10-28 06:23:00 -0700 (Tue, 28 Oct 2008)
Log Message:
Fix for - @inheritDoc tag not working for get/set overrides when you only override the setter of a base class
QE Notes: Baselines for framework test will need to be updated.
Doc Notes: None
Reviewer: Paul
Bugs: SDK-17304
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17304
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ASDocExtension.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.java

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

My phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution

We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.

TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?

This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan

Software Update Point Switching is not working for some Clients

Hi there,
I found nothing similar here and I hope this is the right section.
I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
From how I understand SUP switching as described here
http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
make no attempt to switch.
I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
are available in my environment.
I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
Things I tried additionally to all the log file / WMI / registry sniffing:
Removing the Software Distribution Folder and restarting the Windows Update Agent
Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
"reset" on those machines without reinstalling them.

Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

Incoming Email not working for one web app, but IS working for others in same farm.

I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?

Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result.

Setting up logging - last step not working for me.

Similar Messages

Maybe you are looking for