Setting up .pdf for webview

Hi everyone,
I made a few documents in InDesign as 300dpi A4. For print is ok, the real problem I am facing rigth now is webview.
How can I have the smallest possible disk size and retain the best quallity as possible? How do I need to sett it up properly so I can have a version suited for screen viweing?
Thanks,
Cristi

function(){return A.apply(null,[this].concat($A(arguments)))}
How can I have the smallest possible disk size and retain the best quallity as possible?
Those requirements are incompatible. If it were possible, I'd surely set them as defaults!
function(){return A.apply(null,[this].concat($A(arguments)))}
How do I need to sett it up properly so I can have a version suited for screen viweing?
Export using the "Smallest File Size" preset:
"Use these settings to create Adobe PDF documents best suited for on-screen display, e-mail, and the Internet. Created PDF documents can be opened with Acrobat and Adobe Reader 6.0 and later."
Images get downsampled to 100 dpi (which is enough for regular screens, unless people would want to zoom in), saved with JPEG/Lowest Quality -- you might want to notch that up a bit! -- and converted to sRGB. Everything else is unaffected; in particular, if you have very complex vector art, it won't really matter what sort of compression you apply. In that case, you probably should rasterize the vector art, so it can be downsampled and compressed.

Similar Messages

  • Poor folio performance when set to PDF for both renditions

    Hello,
    I'm getting ready to release a single edition folio and had originally planned to create separate folios for both iPad 1/2 & iPad 3. It then became apparent that this process isn't available for single edition professional dps. I've now tried creating one 1024 folio w/pdf settings. Both renditions look beautiful, but the performance is not really poor - it takes multiple swipes to change pages within an article. Is there any other methods any of you can suggest to handle this? Both apps perform much better when you using png settings. It's starting to feel like we'll either need to sacrifice performance or display at this point. Any thoughts?
    Thanks!
    Darin

    I haven't toggled the zoom enabled button to see if there's any difference. I should state that I've only tested this in the content viewer - I haven't tested the .ipa files yet. Would there be a noticeable difference?
    I'm only testing one two page article that only contains one scrollable content overlay - nothing too complex.
    Folios and viewer are both v25.

  • How to set default .PDF file extension for Form Downloads

    I am trying to find a way of setting the PDF file extension when I download forms.
    I author the forms under a Plus subscription and am then downloading the forms under a basic subscription Collaborator account (diffrent person)
    If I don't include .pdf as the file type when downloading a form with a unique name as the Collaborator, it downloads without a file extension.
    Remembering to continually add the pdf file extension is a pain so I'm hoping there is away of setting this as a defaulet for my 'collaborator' account ?

    Firstly, apologies for multiple posts, I received messages saying my comment hadn't posted and also checked my history before re-submitting.
    Okay, the process is
    1. Log in as the Author account and I can rename the file without having to set the extension
    2. Log in as the Collaboartor account - same PC, browser etc and it doesn't save with a default file extension; HOWEVER, I have done this whilst also being logged in on a diffrent browser as the Author
    3 I have just tried logging out as Author and only being in as the collaborator and the form downloaded with a default PDF.
    4. I had someone else log in as the collaborator from thei PC and browser whilst I was still signed inunder my author account and again they were unable to save as PDF by default
    This has me wondering if there is anything at play when you've got multiple Users?

  • "Display PDF in Browser" setting - $500 reward for the solution

    The corporate policy requires the "Display PDF in Browser" setting to be unchecked for all applications, this is to open the PDF document in new reader instance but our specific application needs the reader to be opened in the same browser even if the preference "Display PDF in Browser" is unchecked.... The setPreference from javascript (html) doesn't seemed to work... How do i make this work? I am looking for programatic way to set this preference in HTML javasript or Java Applet or ActiveX or any other means. I am currently using JS and Object tag, the only functions that we need at this point are page navigation and getting current page using JS.
    Also, I need the links the browser to open in new browser once the PDF is loaded... do I need to reset the preference once it is loaded for the links to open in new browser? How can this be progrmatically achieved without altering the original PDFs?
    I realize that this may be difficult and am looking for workarounds or alternate solutions to meet my req. $500 for anyone who could can provide solution.. Please email me [email protected]
    thanks,
    - Ray

    Convince your IT people to allow folks to set their preference to display in browser.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Sun, 13 Nov 2011 14:58:23 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: "Display PDF in Browser" setting - $500 reward for the solution
    Re: "Display PDF in Browser" setting - $500 reward for the solution
    created by pdf_disp_issue<http://forums.adobe.com/people/pdf_disp_issue> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4023302#4023302

  • Setting background image for repeating frame in .pdf report

    Is it possible to set a background image for a repeating frame, and more specifically for a repeating frame rendered in .pdf?
    I do not see any standard property in the navigator for images of any sort and the documentation touches only on setting background images for graphs, which is not the intent in my case. I -did- add an HTML table property background="myimage.jpg" but the report is ultimately generated in .pdf format and I was not surprised to see that the image was not rendered.
    Does anyone know if setting a background image as described is even possible, and if so, how? A second but less optimum solution would be setting the image as the background for all report pages, again in .pdf.
    Many thanks.

    Hi Raj,
    Yes you can have an image in the background. Thats possible if you are using XML forms as an iview or ivew dev in WebDynpro...
    Also check this [link|regarding background color change in iview]
    Regards,
    Piyush
    Reward points if this helps!!!

  • I download itext  for convert jsp to PDF. How to set content type for PDF.

    I download itext for convert jsp to PDF. How to set content type for PDF. I try
    <%@ page contentType = "application/pdf;charset=TIS-620" %>
    , but the page does not PDF.
    Thank.

    PDF files are usually binary files, JSPs are not well-suited for binary content.
    (If you download the result of your JSP you'll see that it is not a valid PDF file; it will have probably a lot of whitespace and linefeeds, that will choke your PDF reader.). The first few characters must be
    "%PDF-" without whitespace.
    You can try using PDF files encoded as text - check if you can use text-encoded PDFs in iText.
    Try using a Servlet instead.

  • Set default PDF extension for Downloaded Forms - Collaborator

    Is there a way of making .PDF the deafult file extension for downloaded forms?
    I'm trying to dteremine if this feature is controlled by the actual subscription type pr the access type.
    I have a Basic User Account setup as a Collaborator on a form which I author under a Plus subscription. I would like the default file type to be .PDF for any forms that are saved with their own unique name. However, unless I include the .PDF as part of the file name, the file saves without an extension.
    Is there a way that I can set this as a default for the Collaborator because having to remeber to add the file extension is a pain.

    Please see my response in your other post of the same question: http://forums.adobe.com/thread/1343769?tstart=0
    Thanks,
    Josh

  • Set multiple passwords for single PDF

    Hi All,
    Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
    Thanks
    Augustine

    Thank you.
    Do you mean different IDs can be used for a single PDF and can make the PDF protected.
    Regards
    Augustine

  • How to set up PDF IFilter for SharePoint 2013?

    I want to set up PDF IFilter for SharePoint 2013. I know that this is possible for SharePoint 2010.
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5542&fileID=5550
    http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Acrobat_Reader_IFilter_config uration.pdf

    Just wondering.. if you ever got this figured out? If not.. I can assist

  • Setting default magnification for PDF export

    I've created a PDF in InDesign with image files in it. The image files are scaled to look good at a certain resolution & magnification. However, when I export my InDesign document to PDF, and then open the PDF, for some reason the PDF opens at 125% magnification. This makes the images look bad.
    Is there some way I can limit the size the PDF can be opened at, or at least set the default size so the user won't be viewing it at a larger size than I intended?

    Yes, but you have to do it in Acrobat.
    File>Properties>Initial View
    Bob

  • Can't find instructions for setting a PDF form to allow users to type in the fields and save the form.  Thanks

    Can't find instructions for setting a PDF form to allow users to type in the fields and save the form.  Thanks

    Hi,
    Have a look at this page Acrobat refers to them as "Reader Extended PDF", Adobe Acrobat X Pro * Enable Reader users to save form data
    Regards
    Bruce

  • How to set tagged pdf settings for batch process

    Framemaker doesn't allow me to set tagged pdf settings without opening a file (i.e. *.mif/*.fm/*.book).We are using .MIF files to generate PDF in an automated process.( .MIF files will be sent to FrameMaker as a batch file using DZBATCHER then it it uses distiller to produce the PDF).
    How can I set tagged PDF settings for this kind of operation?

    Tagged PDF info is a document level property, i.e. you need to define it in the MIF. Check your MIF manual for: <DPDFStructure and <DPDFStructureDefined statements.
    Note: If you're using any FM version earlier that FM9 and not the FrameServer version, please read your EULA very carefully (Section 2.2 - 2.4) concerning automated creation of PDF files. With FM9, the restriction apparently has been loosened to only how the process is intiated (Section 2.3).
    Copies of the EULAs can be seen here: http://www.adobe.com/products/eulas/

  • How to set print option for a Billing document using T-code VF02

    Hi All,
    Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
    regards
    Anand.

    Enter the billing documents detail
    Goto Goto> Header>Output.
    Check the status for your output type in this screen.
    If it is green then come back to the VF03 screen.Enter the billing document number.
    Click on Billing document-->Issue output to.
    Press (CtrlShiftF1) or click on the icon beside "Print options".
    Here you can see the print preview.
    If the status is red then click on the processing log.Here you will get the error messages.
    If the status is in yellow colour,then click on the "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
    Enter the billing document no
    Go to Menu option -> Go to -> Header -> Output
    In that screen you have to add relevant output type. (Standard output type is RD00)
    Add that & press enter key
    Highlight that line & press "Further Data" button
    Set "Dispatch time" as "4 Send immediately (when saving the application)"
    Press "Back" Button
    again select that line & go to "Communication method" button
    Set "Logical destination" as LOCAL"
    Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
    Press "Back" Button
    Save
    Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
    You can see that output type line appear.
    select that line & press "Print Preview" button or (CTRLSHIFTF1)
    You can see the print preview.
    Alternatively you can use VF31 to print multiple print outs at same time.
    If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
    Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
    Then normal way, print the billing from SAP.
    It'll automatically send to your PDF writer. You can save it to the path you want,

  • How can I set 'Adobe PDF printer' as one of my printer choices?

    I've given it half an hour. Can't seem to figure out how I can set 'Adobe PDF printer' as one of my printer options. I'm not sure if I need to download an Adobe file, and what folder I might need to place it in, and if I also need to add a specific driver.
    I'm trying to create a PDF file that printers and outfits like www.lulu.com will accept. Printing an MS Word document via 'Adobe PDF printer' will allow me, I'm told, to produce a suitable PDF file.
    Ideally I'm producing the original document in Pages - but I've been told by printers and lulu.com et. al. that no one out there likes PDF's produced by Pages ("not professional").
    Any suggestions you might have would be most appreciated...
    Ben

    Ben Low wrote:
    I downloaded the Lulu Adobe PDF joboptions file ... but it didn't come with any instructions on how to install or use it. I just have the file. I opened it with a double click and got Adobe Distiller - and I can 'see' what the settings are, but I'd love to understand how to install it so it becomes a selection when I export from Pages.
    Forget the Lulu instruction about double click to install. Quit Acobat Distiller and Acrobat Pro. Move the Lulu joboptions file to the Adobe PDF Settings folder. The path to it is:
    HD/Library/Application Support/Adobe PDF/Settings/
    or
    HD/Library/Application Support/Adobe/Adobe PDF/Settings/
    You're in the right folder when you see other joboptions files already in the Settings folder.
    Next, launch Pages and open your document.
    From the File menu, select Page Setup. In that window, select Adobe PDF 7 for "Format for," choose your paper size, orientation and scale % and click OK.
    From the File menu, select Print
    In the Print window, be sure the Printer is Adobe PDF 7
    Click on Layout for a pop down list and select PDF Options
    To the right of "Adobe PDF Settings" click for a pop up list and select Lulu
    Click Print
    HTH

  • How to set (class)paths for a Managed server?

    How does one configure the PATH and CLASSPATH and pass definitions (like "-Djava.library.path=c:\p\bea\wlserver6.1\bin")
    to a remotely-started managed server?
    The section in the WLS 6.1 AdminGuide.pdf that talks about configuring a managed
    server's Remote Start tab says on pages 3-9 to 3-10 that, "If you don't specify
    values for these fields and attempt to start the target server from the Administration
    Console, the Node Manager will attempt to start the target server with the values
    for these attributes that were used when starting the Node Manager. The Node Manager
    will be able to start the Managed Server in that case if you specified the required
    values on the command line when starting the Node Manager."
    So it sounds as if I can get the java.library.path definition and CLASSPATH sent
    to the server via the Node Manager startup command.
    Does that work when using the Node Manager as an NT Service? Here is my Win2K
    command file for setting up the Node Manager as an NT Service. Note that I'm trying
    to tell it where to find the Windows native libraries (wlserver6.1\bin for wlntio.dll)
    and the JDBC drivers (C:\SHADOW\jdbc\... and C:\Orant\jdbc\... ) :
    ========== BEGIN installNMNtService.cmd ================ @echo off
    SETLOCAL
    cd C:\p\bea\wlserver6.1\
    rem *** Set Classpath to load Weblogic Classes
    set CLASSPATH=.;C:\p\bea\wlserver6.1\lib\weblogic_sp.jar;C:\p\bea\wlserver6.1\lib\weblogic.jar;C:\SHADOW\JDBC\scjd12.jar;C:\orant\jdbc\lib\classes111.zip
    rem *** Set Command Line for service to execute
    rem *** %JAVA_HOME%\java will automatically be prepended.
    set CMDLINE=" -ms16m -mx16m -classpath \"%CLASSPATH%\" \"-Dbea.home=C:\p\bea\"
    \"-Djava.security.policy==C:\p\bea\wlserver6.1/lib/weblogic.policy\" \"-Dweblogic.nodemanager.weblogicHome=C:\p\bea\wlserver6.1\"
    \"-Dweblogic.nodemanager.reverseDNSenabled=true\" \"-Djava.library.path=c:\p\bea\wlserver6.1\bin\"
    \"-Dweblogic.nodemanager.listenAddress=111.111.111.123\" \"-Dweblogic.nodemanager.trustedHosts=./config/nodemanager.hosts\"
    weblogic.nodemanager.NodeManager"
    rem *** Install the service
    "C:\p\bea\wlserver6.1\bin\beasvc" -install -svcname:EDANodeManager -javahome:"C:\p\bea\jdk131"
    -execdir:"C:\p\bea\wlserver6.1" -extrapath:"C:\p\bea\wlserver6.1\bin" -cmdline:%CMDLINE%
    ENDLOCAL
    ================= END installNMNtService.cmd ==================
    But when I start a server remotely, it can't find the native libraries and it
    can't find the JDBC libraries in the CLASSPATH. Otherwise, it can serve up HTML
    pages at the correct port number so I know it's running.
    When starting a managed server remotely via the WLS 6.1 console, how do I tell
    the managed server where the native libraries and JDBC libraries are?
    Thanks!

    Hi,
    The memory setting on the WC_Spaces managed servers can be seen as mentioned below.
    ps -eaf | grep Spaces
    Above command shows something like this at the top of the output:
    /a01/app/oraweb/middle/jrrt-3.1.2-1.6.0/bin/java -jrockit -Xms512m -Xmx1024m -Dweblogic.Name=WC_Spaces1 ...
    Regards
    Sreedhar

Maybe you are looking for