Setting up printer, unable to connect to wireless and eprint

I'm setting printer up to a macbook  The wireless and eprint are not connecting.  Does it assingn an eprint address?
I'm not sure about the proxy server  What should I do next.  It says the printer has installed but I haven't taken out the
CD yet

Hello mberry.
It would help knowing which printer model you have and how it's connected to the computer.
Please, check out this document.
Getting Started with ePrint
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Similar Messages

  • HP Officejet Pro 8000 Wireless: HP printer unable to connect to wireless router.

    Installing new printer,  getting error msg saying HP printer unable to connect to wireless router.   MAC address filtering may be enabled on your wireless router which can prevent HP printer from connecting to your wireless network during setup.
    SOLUTION says:  If MAC address filtering is enabled and you would like to keep it enabled, you must add the MAC addressof your printer to the list of permitted devices for your wireless router before continuing.
    My router is WD My Net N900 Router. MAC filtering is diabled. My security mode is WPA/WPA2 Personal. 
    I have run out of ideas to try and fix the issues, would appreciate some help.
    Thanks,

    Hi Jamshidk
    I am surprised you are getting that message and you checked the router settings and it is showing that the Mac Filtering is disabled.
    I would suggest connecting the printer to the router with a ethernet cable to get a valid IP address and then setup the wireless.
    Print a configuration report.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c01554589&lc=en&product=3760410&tmp​...
    Type the IP address from the configuration page  in the address bar into internet explorer browser. This will open the embedded web server for the printer. Click on the Networking tab, on the left hand side select wireless. After this is setup and applied, disconnect the ethernet cable.
    Should be on the wireless network. Takes about 1 minute.
    Run the add printer wizard.
    Go to start, devices and printers and select add a printer. (Win 7)
    Test the printer.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Canon MX340 wireless printer no longer connecting over wireless and coming up with "a communications error has occured"

    I have a Canon MX340 wireless printer and have only recently started having trouble printing over the wireless connection. No settings have changed on my MacBook Pro, the printer, the router or the wifi connection and it is strange how it has just stopped working. I have tried things like restarting the laptop and removing the printer from the laptop and re-adding it. It sometimes seems to work for maybe one print but then it goes back to saying "a communications error has occured", when I try to print again.
    Any help would be great. Thanks

    I had the same MX340 problem.  My printer was working fine over WiFi connection to my Airport Extreme for years and then suddenly, about a month ago, it stopped printing after the first print job.  I can print once and then I have to power-cycle the printer to get it to print another time and then I have to repeat the power-cycle.
    The printer seems to be "forgotten" by the network or lose its connection after the first print job.
    On my MacBookPro 10.6.8 I get the error code 300...yadayadayad... On my iMac 10.5.8 it just says :communications error".
    HERE IS THE FIX - I got it off this link - http://www.techsurvivors.net/forums/index.php?showtopic=24681
    You have to connect to the MX340 using the printer cable that came with the printer (or any USB printer cable) and set up a hardwired USB printer queue.  Then print a couple of print jobs - I use TextEdit and type in "1234".  Then try the same thing but select your WiFi print queue - I just type another line on the same sheet of paper with TextEdit.
    The WiFi connection should work again.  I did this a few more times and then disconnected the USB cable and now it continues to work without the USB print queue being used.  I can also print to the WiFi queue with my iMac.
    If you still have problems I suggest you set up the printer again on the WiFi router using the "print cable connection" method.  Here's a link to a webpage someone kindly provided instructions for the process:
    http://machinesaredigging.com/2011/04/08/how-to-install-the-printer-canon-mx340- wi-fi-without-the-cd-on-mac/
    Good luck!

  • Printer Unable to connect on Windows 8.1 64 bit based Lenovo Laptop.

    We have HP LaserJet 3030 all in one printer installed on Windows XP Professional. We are using LAN network to connect the printer on network. But our Printer Unable to connect on Windows 8.1 64 bit based Lenovo Laptop. Also check for windows update for this issue. Please fix this quickly.

    Try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
    If you can't get a working installer via the standard download links, try the following download links instead:
    iTunes 11.1.4 for Windows (32-bit) - iTunesSetup.exe
    iTunes 11.1.4 for Windows (64-bit) - iTunes64Setup.exe

  • OfficeJet 8600 Pro Unable to Connect to Server for eprint BUT is connected to nework

    Just set up my 8600 and everything connected great until I tried to connect to enable web services on the printer.  It says it is unable to connect to serve and asks if I want to enter a proxy.  I dont understand why it cannot connect to server if my printer is connect to my network??

    Hello cboucher78,
    Welcome to the HP Support forums.  I gather  that you are getting an error message when you are trying enable the web services for your Officejet Pro 8600 printer.
    The message you are getting is indicating that the printer cannot establish 2-way communication with the HP ePrint servers and needs some assistance.  Please set a manual IP address and manual DNS servers to correct this.  I have included a link to another post I did that has the steps with screen shots.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Just updated to iOS6 unable to connect to Appstore and passbook doesn't work

    Just updated to iOS6 unable to connect to Appstore and passbook doesn't work?

    Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
    Re: How do I turn off the compatibility mode for ITunes.
    Does that clear up the compatibility message?

  • I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features

    I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos".  How can I do that without losing some of the features of those two?   I just want to add a feature.  Thanks

    Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
    You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
    Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
    iTunes Store: Associating a device or computer to your Apple ID

  • I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

    I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
    I JUST NEED HELP

    I would contact Apple under your warranty.  I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod. 

  • Unable to connect to Forms and Reports

    Hi,
    I'm unable to connect to Forms and Reports. I have done the following installations.
    1) First I have installed oracle 9i database in C:\oracle. oracle schema is devlp
    I was able to connect to database at scott/tiger@devlp
    2) I have downloaded oracle forms and reports from oracle site and installed.
    When installing forms and reports, the directory "oracle" is already in use message popped. So changed the path to C:\oraforms and installed both forms and reports.
    3) After installation, i tried to connect to forms/reports but couldnot connect. Error TNS could not connect.
    4) When i checked the TNSNAMES.ORA, the DEVLP string is available.
    Where should i changed the tnsnames??????
    Please anybody let me know how to have correct tnsnames and where.
    Thanks in Advance
    Chettarjee

    Mr. Sybrand,
    Thanks for the reply and I understood your point. Can you please further guide me to get an appropriate Oracle Forms/Reports (Developer) version in order to make application using Oracle Database 10g. Please note that most of my experience is in D2K 2000 rel:6. and unfortunately I came into software development after a long gap that is why not much aware about latest version out there of Oracle Forms/Reports.
    But is there really no way to connect D2K rel:6 with DB 10g !!!
    Regards,
    Zia

  • Unable to connect to CMC and Java Infoview

    Hi
    I am unable to connect to CMC and Java Infoview. When I am attempting to connect, then the following message is displayed.
    "Oops! Internet Explorer could not connect to <web server>:<port number>"
    Please give me some suggestions.
    Thanks!

    Hi Stratos
    I uninstalled the designer and repaired Crystal Reports Server. But it did not help.
    The CMS is running now. But I cannot find all the other services and I am getting the same error when I try to open CMC or InfoView.
    I found some of these errors in my system's event viewer:
    NT Service message: NT Service Initialization Problem.
    The root server reported an error Initialization Failure.
    The source for both these errors is BusinessObjects_CMS.
    Please suggest something
    Thanks

  • "Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

    "Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
    == This happened ==
    Every time Firefox opened
    == Since I downloaded Firefox

    same here my AV is ESET, i already unblock it but no use can't connect to the internet..

  • Unable to connect to rman and sqlplus

    Hi,
    my /u01 location where the orainverntory is located is 100% full ,and i am unable to connect to sqlplus and rman i deleted the old trace files but it doesn't help me.
    what is mininum space required to connect to sqlplus

    If you can post the error messge, we may be in a position to help you.
    Jaffar

  • I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

    I have installed Windows 7 using Boot Camp on Macbook Pro OSX 10.9.3, I'm not able to connect to wireless and its not showing as well in network sharing. Please help

    Hello Bhagyeshree
    Check out the articles below to troubleshoot issues with connecting to Wi-Fi. Start with creating a new Network Location and then search for a Wi-Fi network and if that does not work, then go through second article to troubleshoot the issue further.
    OS X Mavericks: Add a network location
    http://support.apple.com/kb/PH13788
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Regards,
    -Norm G.  

  • My I-Pad is locked up with a message that I-Cloud has not  been backed up in two weeks and that the I-Pad must  be locked, connected to wireless, and plugged in.  I cannot get this message to go away or access any other parts of the I-Pad

    My I-Pad is locked up with a message that I-Clouhd has not been backed up in two weeks and that the I-Pad must be locked,  connected to wireless, and plugged in.  I cannot get this message to go away or access other parts of the I-Pad.
    I can't turn off the I-Pad either.

    U really need to call Apple support ,because only they can help you , or go the store but make sure u have an appointment ,they are always a mob scene

  • HT3728 my time capsule its always slashing orange led even though we are connected to wireless and storege

    he,i have time capsule that and it doesnt turn the green light even thouhg we are connected to wireless and its storage........

    Flashing is asking for your attention.. the actual issue could be trivial.. or major.
    Open Airport utility.. look at status.. click on status or the amber led.. it will list the problem/s

Maybe you are looking for