Setting Weblogic6.1 server as a win2000 service

I wont to set a Weblogic6.1 server as a NT service.
I started the Admin server using startWeblogic.cmd and it's booted with no problem. Then I run installNtService.cmd the service created successfully and started for a few seconds after that it left with no log or an error description. Is there a way to debug the service?
Are there any known bugs on the win2k os?
Thanks...
Eran.

Eran:
I have 2 Win2K machines on my desk. I had no trouble with WLS 7.0.
When running as a service, WLS should start with the OS. Therefore, it should be running
after a reboot. Something that just came back to me is that the installNtService.cmd
script should have your WLS login & password so it can put those in the registry.
It's not going to start if it cannot pass the security check. I'll bet you ran that cmd
file unmodified, right?
The WLS Installation Guide says that the password specified during the installation will
be used, and you have to remove and reinstall the service if that password changes.
Since we cannot tell what is stored in the registry, you might as well specify a
password to rule out problems in that area.
If interested, you can look at Release Notes, Service Pack information and known
problems at http://edocs.bea.com/wls/docs61/notes/index.html -- might need a login.
What you should probably be focusing on is
http://edocs.bea.com/wls/docs61/install/instprg.html#1041005
==========
Additional Windows Service Information
The WebLogic Server service uses the system password that you specified during
installation when booting WebLogic Server. If you change this password at a later time,
you must uninstall the service using uninstallNtService.cmd, modify the
installNtService.cmd file to include the -password argument, and execute the modified
installNtService.cmd file. For details about modifying the installNtService.cmd file,
see "Starting and Stopping WebLogic Servers" in the Administration Guide.
==========
http://edocs.bea.com/wls/docs61/adminguide/startstop.html
==========
4. ...
"D:\bea\wlserver6.1\bin\beasvc" -install
-svcname:mydomain_myserver
-javahome:"D:\bea\jdk131" -execdir:"D:\bea\wlserver6.1"
-extrapath:"D:\bea\wlserver6.1\bin" -cmdline:%CMDLINE%
-password:weblogic
==========
If this does not help, then it's time to open a support case.
Wayne
Eran wrote:
Well... I'm running Weblogic6.1_sp4 (the same occurs on WLS6.1_sp2) on WIN2K.
After failing to use my application server, I triad the Admin server installNtService.cmd
script.
The result was the same, the service created and run for few seconds and then
stop unexpectedly with no logs or system error reported.
Is there a way to debug such service?
Are there any known problems related to the OS?
I have managed to run the service (and others) on a different machine.
Thanks........
rting the services, check the list of services running on the
system.
IF you find it , then it is running. else check the service pack u r
using
like Scott suggested
Rama
"Eran Hagby" <[email protected]> wrote in message
news:[email protected]...
I wont to set a Weblogic6.1 server as a NT service.
I started the Admin server using startWeblogic.cmd and it's bootedwith no
problem. Then I run installNtService.cmd the service created successfully
and started for a few seconds after that it left with no log or an error
description. Is there a way to debug the service?
Are there any known bugs on the win2k os?
Thanks...
Eran.

Similar Messages

Please help me in setting the Mobile server for mobile filed services

hi,
We want to set the oracle mobile server, Oracle mobile filed service, can any body help out what are the mandatory setups and flow of the setup.
Can you also let me know the list of patch and requried services information too.
Thanks & Regard
Abdul Hafeez Shaik

Thank you Kevin,
I have already gone through this document.
My actual problem is like, After starting the Mobile server when I tried to run this url <url:/portnumber>/webtogo/setup Am getting the webpage with junk values.
What other patch's or what other setups we need to do to have the functionality like when ever we run the above given url it will install the client side software (webtogo + oracle lite database)
Please if you can give me the quick setups which we need to do that would be help full to us.
Best Regards
Abdul Hafeez Shaik

How to set Essbase Administration Server as Windows service?

Hi,I have installed the Essbase Admin Services 7.1.0.0 Build 261 under Tomcat application server. Now from Start menu I have to select "Start Administration Server". Is there any way to set this option as Windows Service.My system:Windows 2003 SP1,Essbase 7.1.0,Essbase Admin Services 7.1.0.0 Build 261Thanks,Grofaty

This information is in the Install Guide that comes with EAS.Running EAS as a Windows service is an option you can select when you install it. If you did not do that, you can set it up to run as service by doing the following: (From the EAS Install Guide)----------------------------------------Adding Administration Server as a Windows ServiceYou can add Administration Server as a Windows service, even if it was not installed as a Windows service.?To add Administration Server to the list of Windows services:1. From a command prompt, navigate to the following directory: EASPATH\eas\server\bin2. Run the following command: install_service.batAdministration Services installs the Windows service as Hyperion-Essbase_Administration_Server Windows service. A message displayed in the command prompt window indicates that the service is installed.3. Start the Hyperion-Essbase_Administration_Server Windows service. See ?Starting the Administration Server Windows Service? on page 49.The Hyperion-Essbase_Administration_Server Windows service is set to start automatically each time you reboot.

Newie Mail server and running other services

We have a small office network of 6 macs that connect to a Panther server, this server provides DNS and file sharing and thats about it a Filemaker Sever and Retrospect Server. I doesn't suffer from heavy use
I have been using a a separate mac to run Quickmail server 1 (os9) and I need to upgrade it as some of the mail protocols are out of date.
We have a static IP address assigned to our mail gateway by our service provider.
My question or advice
Should I just start using OS X server to run mail services
or
Upgrade Quickmail and continue running it separately on a new mac mini (or similar)
My concerns are at the moment any problem with email locally can be solved pretty much without effecting the other server or the network.
Thanks

The basic setup is prety simple...
Replace following with your own equivalents...
Domain name: woopee.com (the domain name after the "@" in your emails)
Host name: mail.woopee.com (the hostname your MX record points to. Does not need to match server hostname. This will be the hostname mail server uses when communicating with other servers)
Local Host Aliases: woopee.com (a list of the domains you want to accept mail for. Probably just same as Domain name?)
Local network: 192.168.10.0/24 (LAN IP range for local users. Used to bypass authentication when they send mail out)
Server Admin-> Mail-> General...
Tick:Enable POP
Tick:Enable IMAP
Tick:Enable SMTP, Allow incoming mail, Enter Domain name & Host name (from above).
Mail-> Relay
Tick: Accept SMTP relays... Enter localhost IP: 127.0.0.1/32 and Local network (from above).
Tick: Use these junk mail rejection servers. Add: zen.spamhaus.org
Mail->Filters
Tick: scan for junk mail. Minimum score: 5 (can be reduced later)
Junk mail should be: Delivered (will just tag and forward to recipient)
Tick: Attach subject tag: * Junkmail *
Tick: Scan email for viruses
Infected messages should be: Deleted
Tick: update junk mail & virus database: 1 time per day
Mail->Advanced->Security
SMTP: none (this prevents smtp authentication from anyone outside your Local network)
IMAP: Tick: Clear, Plain, Cram-md5 (or leave all unticked if only using pop accounts)
POP: Tick: APOP
Mail->Advanced->Hosting
Local Host Aliases: Add: localhost & woopee.com (separate entries, see Local host aliases, above)
That's it (I think ...although I cannot guarantee I have not missed something). There will be no problem setting this up and seeing it going whilst still using the existing mail server. Set up client accounts to send and receive from new server and you can send mail around internally to test. Last thing would be to change your firewall port-forwarding for SMTP from existing server to new one.
Watch the mail.log in Console for any errors & do plenty tests.
Ensure users have mail enabled in Workgroup Manager.
There are plenty mods available beyond this. Have a good read through the mail services manual (I know its a bit confusing at times) and you should see where the above settings fit in.
Lots of stuff on the forum here which you can search for. Spam filtering in particular can be made far more effective but requires editing of the underlying unix configuration files - again, plenty of previous discussions about that on forum. Meantime, the zen.spamhaus.org RBL will filter out a great many spammers.
-david

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Unable to start Admin Server as a windows service

I installed Admin Server as a windows service and when I started it, I got the below errors. Do you have any ideas?
I'm using SOA Suite 11.1.1.2.0 and WL 10.3.2 on Windows
Thanks,
[Mon Mar 15 11:16:19 2010] [initLog] initializing logger
[Mon Mar 15 11:16:19 2010] [E] [initLog] No 'ROTATION_TYPE' header found. 'TIME' based rotation will be used by default.
[Mon Mar 15 11:16:19 2010] [E] [initLog] No 'TIME_START_DATE' header found or value is invalid. Rotation will take place every 24 hours beginning today at 23:59:59
[Mon Mar 15 11:16:19 2010] [E] [initLog] No 'TIME_INTERVAL_MINS' header found. Using the default value of 24 hours.
[Mon Mar 15 11:16:19 2010] [I] [initLog] TIME based log rotation is ON
[Mon Mar 15 11:16:19 2010] [I] [trigger] First rotation due in 45820 secs
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] console allocation successful. THREAD_DUMP redirection enabled
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] About to execute CreateThread()
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszCmdLine = -jrockit -Xms128m -Xmx256m -Xverify:none -classpath "C:\ORACLE~1\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\ORACLE~1\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar;C:\ORACLE~1\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\ORACLE~1\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\ORACLE~1\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;C:\ORACLE~1\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\ORACLE~1\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;" -Dweblogic.Name=AdminServer -Dweblogic.management.username= -Dweblogic.ProductionModeEnabled= -Djava.security.policy="C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy" weblogic.Server
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszJavaHome = C:\ORACLE~1\MIDDLE~1\JROCKI~1.5-3
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszExecDir = C:\Oracle11112\Middleware\user_projects\domains\soadev_domain
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszOldPath = C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszNewPath = C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\bin;C:\ORACLE~1\MIDDLE~1\JROCKI~1.5-3\jre\bin;C:\ORACLE~1\MIDDLE~1\JROCKI~1.5-3\bin;C:\ORACLE~1\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszDelay = 0
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszStopClass = []
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszLog = [C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\AdminServerSvc.log]
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] Thread created successfully
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] Reporting SCM of SERVICE_START_PENDING with delay=0
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszHost = []
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] lpszPort = []
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] Reporting SCM of SERVICE_RUNNING
[Mon Mar 15 11:16:19 2010] [I] [ServiceStart] waiting for multiple events
[Mon Mar 15 11:16:19 2010] [I] [StartJVM] Parsing JVM Arguments
[Mon Mar 15 11:16:19 2010] [I] [StartJVM] Initializing JVM
[Mon Mar 15 11:16:20 2010] [I] [RunJavaApp] Loading class - weblogic.Server
[Mon Mar 15 11:16:20 2010] [I] [RunJavaApp] Locating method "public static void main([]String)" in main class
[Mon Mar 15 11:16:20 2010] [I] [RunJavaApp] Building arguments for main class
[Mon Mar 15 11:16:20 2010] [I] [RunJavaApp] Invoking main class
<Mar 15, 2010 11:16:22 AM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.5-32_o-121899-1.6.0_14-20091001-2107-windows-ia32 from BEA Systems, Inc.>
<Mar 15, 2010 11:16:23 AM PDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 >
<Mar 15, 2010 11:16:27 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 15, 2010 11:16:27 AM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 15, 2010 11:16:27 AM PDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Mar 15, 2010 11:16:27 AM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\AdminServer.log.>
<Mar 15, 2010 11:16:27 AM PDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Mar 15, 2010 11:16:34 AM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
java.lang.ClassNotFoundException: oracle.ias.cache.Startup
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:41 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:43 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Mar 15, 2010 11:16:43 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\tmp\_WL_user\FMW Welcome Page Application_11.1.0.0.0\cb7uge\fmw-welcome.war. Please make sure that the annotations are valid. The error is oracle.dms.wls.DMSServletFilter>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FMW Welcome Page Application [Version=11.1.0.0.0]' due to error weblogic.application.ModuleException: Failed to load webapp: '/'.
weblogic.application.ModuleException: Failed to load webapp: '/'
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:378)
     at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:391)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
When processing WebService module 'wsil.war'. Failed to load servlet Class: oracle.j2ee.ws.server.wsil.WSILServlet
Ignoring: unable to load class:java.lang.ClassNotFoundException: oracle.j2ee.ws.server.wsil.WSILServlet at: weblogic.xml.schema.binding.util.ClassUtil.loadClass(ClassUtil.java:76)
<Mar 15, 2010 11:16:47 AM PDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'em' due to error weblogic.management.DeploymentException: .
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:176)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:104)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:140)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@11450347[app:DMS Application module:dms.war path:/dms spec-version:2.5 version:11.1.1.1.0] oracle.dms.wls.DMSServletFilter.
java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'DMS Application [Version=11.1.1.1.0]'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: ServletContext@12124116[app:wsil-wls module:/inspection.wsil path:/inspection.wsil spec-version:2.5] oracle.dms.wls.DMSServletFilter.
java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:47 AM PDT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'wsil-wls'.
weblogic.application.ModuleException:
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1399)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:460)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.dms.wls.DMSServletFilter
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:296)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:269)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\soadev_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\soadev_domain.log00004. Log messages will continue to be logged in C:\Oracle11112\Middleware\user_projects\domains\soadev_domain\servers\AdminServer\logs\soadev_domain.log.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Mar 15, 2010 11:16:48 AM PDT> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "Audit Loader Startup Class", java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoader
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:247)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.invokeClass(ClassDeploymentManager.java:253)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager.access$000(ClassDeploymentManager.java:54)
     at weblogic.management.deploy.classdeployment.ClassDeploymentManager$1.run(ClassDeploymentManager.java:205)
     Truncated. see log file for complete stacktrace
>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:5efe:a01:1b5:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:100:7f:fffe:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:4b5:ea73:59f2:2e1a:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.1.1.181:7001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 15, 2010 11:16:48 AM PDT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "soadev_domain" running in Development Mode>
<Mar 15, 2010 11:16:48 AM PDT> <Warning> <Server> <BEA-002611> <Hostname "mycomputer.abc.com", maps to multiple IP addresses: 10.1.1.100, bf80:0:0:0:3gr:kdab:43f3:2e1a%10>
<Mar 15, 2010 11:16:49 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 15, 2010 11:16:49 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>

Hi,
If you see your logs, you server has actually started in "RUNNING" mode. Its only throwing lot of "ClassNotFoundException" because I guess they classes are not available in classpaths. If you know the "jar" which contains which are being complained, copy the jar files to "DOMAIN_HOME/lib" which is simple way to add jars to classpath.
<Mar 15, 2010 11:16:49 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 15, 2010 11:16:49 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
Thanks.
Vijay Bheemineni.

How can I set up Mavericks Server on a Test Mac without affecting the production server

I have Mountain Lion server running as on an xserve as our main server, it has developed a few issues particularly related to Profile Manager and Certificates.
So I was going to use the move to Mavericks as an opportunity to have a fresh start.
So I want to set up Mavericks Server on a mac mini temporarily to test it and configure all the services before moving it to the Xserve as the main server.
My question is what is the best way to do this, obviously I can't use the same IP or hostname as the main server if it is connected to the network, and some services can't be set up without a network connection.
So do I give it a new IP and hostnmame for now and then change it later on, my concern is that changing the hostname might cause issues down the line.
So what is the best way to set up a fresh server in preperation as a drop in replacement of the current server?

Ok I got the test server set up fine and cloned it over to a spare partition on the Xserve.
But when I booted into the new partition several things broke.
1st the IP address changed itself despite the fact it is set to Manual, The Alert section of Server.app let me repair this.
Profile Manager no longer worked, the web page just said Profile manager could not be found, was working fine on the test mac
Tried deleting the OD master and resetting Profile Manager but it still didn't work.
DNS needed repairing and restarting
I decided at that point to abandon it and go back to the test mac where everything is still working.
Any tips for overcoming these issues.
I have thought maybe it would be best to turn off all server services before making the clone and then turn them on one at a time once it has been restored to the new partition on the xserve
Also if the certificates that are created when making an OD master were made on the mac mini does that cause a problem when it has been restored to a different machine, should I leave OD off and just set it up when it is in its final place?

Questions in regards to server 2012R2 Remote desktop Service deployment and GPO

Hi Everyone
We have a business requirement moving to 2012R2 RDSH server. I have installed a 2012R2 member servers and enabled Remote desktop licensing role. I have activated the licenses. the servers is in operational
I have deployed 3 windows 2012R2 member server "RDS1" , "RDS2" and "RDS3".
on RDS1 I ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
On RDS1 Server Manage Dashboard Page Select Remote Desktop Services > Overview. Under RD Licensing I added my 2012R2 license server "2012r2-tslic". Go to task. Edit deployment properties RD license mode to per device and click OK.
Reboot RDS1
Check RD Licensing Diagnoser everything is clear
On RDS2 I did the exact same thing ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
But With RDS2 I move this server to an OU that link to a GPO with RD licensing details. after reboot the servers check RD Licensing Diagnoser I can see 2012r2-tslic specified as the license servers.
Based on this document
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx Are you suppose to configure RD license server via Remote desktop Service deployment ? Not GPO ?
Here are my questions
We currently have ten 2008r2 terminal servers in a NLB cluster. each RDSH server have in house application installed on each one of them. User connect to the 2008R2 RDSH servers via RDP connection. we have a restricted GPO apply to those
RDSH servers. user cannot do anything on RDSH servers apart from running the application and use excel. On the remote desktop session host configuration we have enable settings like end a disconnected session , Active session limit ,
remote control users session , LPT port redirection.
We push out RD license server detail via GPO to the terminal servers
Can I use our existing GPO apply the licensing server settings , desktop restriction setting to the 2012R2 RDHS servers or we should be using Remote desktop Service deployment to do the job ? If that is the case how would you transfer the
current 2008r2 environment to 2012 using Remote desktop Service deployment. is that mean I have to manually configure 1 by 1.
Please help
Many thanks

Hi,
Please see my response to you in the other thread. Please contact me via email and I will go over the basic planning and deployment steps with you which will help clear things up and get you started off on the right foot.
You should only run through the wizard and create a RDS deployment once. Then you add the various servers (RDSH, RD Licensing, RD Gateway, etc), set Deployment properties, etc.
Thanks.
-TP

Setting up VPN Server fails in Windows 8.1

Hello Folks
I'm trying to set up VPN server in my Windows 8.1 box to receive incoming connections. It fails at the last step (http://www.diaryofaninja.com/blog/2012/09/11/setting-up-a-vpn-server-on-windows-7-or-windows-8-ndash-secure-your-internet-use-while-away)
of the process (Allow Access) with the following error. I binged a lot but none of the trouble shooting mechanisms worked for me. I made sure that concerned service (Routing and Remote Access) can be started and stopped manually. Also, the same step works
in Windows 7.
Please see attached for error details.
Highly appreciate any help for fixing the issue.
Cheers
Manohar

Hi Manooh,
Besides disabling IP v6, try reset the TCP/IP in the way below:
Open the command line windows as an administrator and type the command “nets hint ip reset” hit enter, or you can try the fix it below:
http://support.microsoft.com/kb/299357
We usually modify the default RDP port 3389 to another value, if you followed this too, you should add an port exception through a firewall in the way below:
1.Open Windows Firewall
2.In the left pane, click Advanced settings.
3.In the Windows Firewall with Advanced Security dialog box, in the left pane, click Inbound Rules, and then, in the right pane, click New Rule.
4. Choose “port” and input the port number as allowed to connect.
Regards
Wade Liu
TechNet Community Support

HTTP Proxy setting for SOA server

Hi,
my intention is to enable SOA Server to connect through HTTP Proxy to external services. This occurred when I am trying to connect to Yahoo Mail Server, via User Messaging Service but it keep throwing connection time out. One of the possible solution is to make the service to connect via the HTTP Proxy server in our network.
There are no mention of how to setup HTTP Proxy connection for UMS, as well as SOA Server in any documents.
Please advice or direct me to the relevant solutions.
Appreciate any help rendered :)
yee thian

I have not worked in SoA server, but since it uses weblogic server underlying (I assume), you can try setting the -Dhttp.proxyHost , -Dhttp.proxyPort system properties ( https for secured URL's) to WLS to specify the proxy details. Also the product might not have the capability to pass user credentials for authentication at the proxy. The version of OSB we are using had this problem. To overcome this you might require to add the URL to the proxy free list in your proxy server. This prevents the proxy from prompting for the user name when you access that URL.

Need to host weblogic server as a windows service

Hi,
I need to host weblogic server as a windows service, Along with the log file in which I can log the System.out.println statements.
I am having weblogic server 10.3.4
Thanks in advance
Harshal

Hi Harsgal,
You can use the Windows Service configuration script mentioned in the following link:
http://middlewaremagic.com/weblogic/?page_id=2594#comment-3454
Ans as you mentioned that you want to see the System.out.println statements also in the server.log then in that case please add the JAVA_OPTION in the same script mentioned in the above link as *"-Dweblogic.log.RedirectStdoutToServerLogEnabled=true"*
Example:
echo off
SETLOCAL
set DOMAIN_NAME= Test_Domain
set USERDOMAIN_HOME= C:\BEA103\user_projects\domains\Test_Domain
set SERVER_NAME=ManagedServer1
set PRODUCTION_MODE=true
set WL_HOME=C:\bea103\wlserver_10.3
set ADMIN_URL=http://AdminServerHostname:7001
set MEM_ARGS=-Xms1024m -Xmx1024m -Dweblogic.log.RedirectStdoutToServerLogEnabled=true
call "%WL_HOME%\server\bin\installSvc.cmd"
Topic: Managed Server As Windows Service
http://middlewaremagic.com/weblogic/?p=680
Also if you want to create a Separate STDOUT and STDERR file to collect your System.out.println Statements then please add the following MEM_ARGS as well inside your script:
JAVA_OPTIONS=-Dweblogic.Stdout=D:\bea_home\wlserver_10.0.2\user_projects\domains\syncro_domain\ASstdout.txt -Dweblogic.Stderr=D:\bea_home\wlserver_10.0.2\user_projects\domains\syncro_domain\ASstderr.txtThanks
Ravish Mody

Conver weblogic Admin server to a windows service

I used the following scripts to conver weblogic Admin server to a windows service :
SETLOCAL
set DOMAIN_NAME=Sayesaman
set USERDOMAIN_HOME=C:\jdev11.1.1.6\user_projects\domains\Sayesaman
set SERVER_NAME=Sayesaman
set WL_HOME=C:\jdev11.1.1.6\wlserver_10.3
set WLS_USER=weblogic
set WLS_PW=weblogic110
set PRODUCTION_MODE=false
set MEM_ARGS=-Xms512m –Xmx512m
call "C:\jdev11.1.1.6\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
after running these scripts the windows service created successfully and running properly .
but the state of all web application is failed and even I can't deploy any web application and I get the following error :
Class Not Found : oracle.dms.wls.DMSServletFilterr
Please help me to conver weblogic Admin server to a windows service correctly .
Edited by: 950222 on Aug 1, 2012 2:46 AM

Request you to share the entire stack of error.
Meanwhile,I would recommend that you deleet the existing service created and re-create the service by following the below steps:-
1. Create a text file
%MIDDLEWARE_HOME%\user_projects\domains\servers\AdminServer\security\boot.properties
Add the following lines
username=weblogic
password=
Important to Note:
a. If this step is not performed you will see the following generic error when the Admin Server is started in " background mode " via an MS Windows Service.
BEA-090403 Authentication for user weblogic denied
This error occurs because, by default, startup of Admin Server interactively prompts for the weblogic username and password. If the password is not supplied the error is thrown.
b. As soon as you start the Admin Server the username and password values in this file will be encrypted. Be sure to stop / start the Admin Server as soon as possible to ensure the credentials are not exposed for longer than necessary.
2. Create a command script called installAdmServer_Service.cmd which has lines like
SETLOCAL
set DOMAIN_NAME=ClassicDomain
set USERDOMAIN_HOME=C:\middleware\FMW11g\user_projects\domains\ClassicDomain
set SERVER_NAME=AdminServer
set PRODUCTION_MODE=true
cd %USERDOMAIN_HOME%
call %USERDOMAIN_HOME%\bin\setDomainEnv.cmd
call "C:\middleware\FMW11g\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
3. For troubleshooting / debugging purposes it is helpful to redirect standard out and error to a text file. Although most information is captured in the AdminServer server log files, you will not see all standard out and error when the server is started via a MS Windows Service (unlike when you start an AdminServer from the command prompt using startWebLogic.cmd). To redirect standard out to a text file, backup and edit installSvc.cmd and change the line at the bottom of the file so it include the -log parameter e.g
"%WL_HOME%\server\bin\beasvc" -install
-svcname:"%DOMAIN_NAME%_%SERVER_NAME%"
-javahome:"%JAVA_HOME%" -execdir:"%USERDOMAIN_HOME%"
-extrapath:"%WL_HOME%\server\bin" -password:"%WLS_PW%"
-cmdline:%CMDLINE%
-log:"C:\Middleware\FMW11g\user_projects\domains\ClassicDomain\%SERVER_NAME%-stdout.txt"
4. Now run "installAdmServer_Service.cmd". The Service should be installed, it will have a name like ""beasvc %DOMAIN_NAME%_%SERVER_NAME%" e.g
beasvc ClassicDomain_AdminServer
The Service "Startup Type" will be 'Automatic'. Just like any other MS Windows Service you can change the 'Startup Type' to 'Manual'.
Start the Service. The Service will come back fairly quickly to say it is started. The actual time taken for AdminServer to start and reach a state of 'RUNNING' will be longer - perhaps two or three minutes. The state of the server can be monitored by reviewing the stdout txt file.
Notes:
An alternative to the boot.properties approach to specifying the Admin Server weblogic username / password is to add the following environment variables to your wrapper cmd script - installAdmServer_Service.cmd
set WLS_USER=weblogic
set WLS_PW=manager11g
The beasvc utility encrypts the login credentials and stores them in the Windows registry.
This is one of two possible methods for avoiding the username/password prompt when a server instance starts. The disadvantage to this method is that changing the username or password for the server instance requires you to delete the Windows service and set up a new one with the new username and password. Instead of this method, you can use a boot identity file. With a boot identity file, you can change the login credentials without needing to modify the Windows service.
Create a MS Windows Service for a Managed Server e.g WLS_FORMS
Important to Note:
1. The ADMIN_URL value should reference the AdminServer hostname and listen port.
2. The SERVER_NAME value is case sensitive. For example, if you are creating a MS Windows service for a different managed server such as 'wls_ods1' then the value needs to match the case of the server name otherwise the startup of the server via the MS Windows service will fail.
3. Be careful that there are no trailing spaces after each line in the command file - trailing spaces will cause the managed server to fail at startup. For example a trailing space in the ADMIN_URL value will result in the error
<Error> <EmbeddedLDAP> <BEA-171524> <Cannot determine the Listen address for the Admin server
3. Now run "installAdmServer_Service.cmd". The Service should be installed, it will have a name like ""beasvc %DOMAIN_NAME%_%SERVER_NAME%" e.g
beasvc ClassicDomain_AdmServer
The Service "Startup Type" will be 'Automatic'. Just like any other MS Windows Service you can change the 'Startup Type' to 'Manual'.
Start the Service. The Service will come back fairly quickly to say it is started. The actual time taken for the managed server to start and reach a state of 'RUNNING' will be longer - perhaps two or three minutes. The state of the server can be monitored by reviewing the stdout txt file.
Hope this helps!
-Sandeep

How to find the Values of SAP Gateway Server Host and Gateway Service Valu

Hi All,
I installed SAPR/3 4.7 EE on Windows. For configuring SLD and LDAP i am unable to give the SAP Gateway Server Host and Gateway Service values.
Can any one plz suggest me how to find these values.
Regds
Phanikumar

Hello, SAP Gateway Server Host and Gateway Service are used to set up rfc connectivity, that is the host name and the system number where your sld and ldap is responding, if you have no sld and no ldap , just simply uncheck that options while installing.
Have a nice week end, Luciano.

Does Safari run in Windows Server 2008 R2 (Terminal Services)?

does Safari run in Windows Server 2008 R2 (Terminal Services)?

Hi Jess,
Here are two things I suggest you check:
The Monitoring interval is set to 900 minutes, would the profile size get reduced after 15 hours and run
gpupdate/force?
Since the Sessenv.dll version is higher than the ones described in KB 2575946, the issue is supposed to be fixed. I suggest you run System File Checker to scan all protected system files.
In addition, you can also collect Gpsvc.log to determine if policies are applied successfully.
More information for you:
System File Checker (sfc)
http://technet.microsoft.com/en-us/library/bb491008.aspx
Group Policy not being applied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9884d06d-b5f8-44c9-a703-7b5211f1e0ba/group-policy-not-being-applied?forum=winserverGP
Best Regards,
Amy

Setting for J2EE server do not exist

Hi,
I have prepared a web service from a FM.
I can't test it from the WSADMIN since this system is not integrated to a J2EE server. So I get the error message "Setting for J2EE server do not exist"
I am able to generate the WSDL file from Tcode WSADMIN
How can I test this web service from a browser with a J2EE server? If browser not possible then how can I test this web service.
Thank you,
Sam

Hi Sam,
I am not sure if you can test the web services without a J2EE server. For
testing in wsadmin, you do not need the system to be integrated with a J2EE server. Only the details of any J2EE server in the landscape can be given in
wsadmin -> Goto -> Administration Settings .
Regards
Srikishan

Setting Weblogic6.1 server as a win2000 service

Similar Messages

Maybe you are looking for