Settings for paralel processing

Hi All
In my process chain i upload data to PSA then send it to 9 cubes in series. When i check "update from PSA" i see a button "Parelel processing" Number of processes is set to 3 by default.
If i increase that value, what should i expect to happen? Will update to the cubes be faster?
Thanks in advance.
Regards
Sancho Panza

Hi,
before increasing the no.of work processes check how many back ground work processes are available in your system (t.code SM50) if you have enough work processes ( like 7 to 8) you can increase to 5 bcoz other jobs also need to use the work processes so if your jobs occupied all the WP it will impact other jobs which are running on the system, so check the availability and change if necessery or else proceed with the same, but by increasing the no.of processes load will be fast.

Similar Messages

Error in PB60 "Settings for word processing system are wrong"

Hello Everybody
I am working on recruitment,
i have create applicant activity in SPRO, but when i was going to create applicant activity PB60 maintain and entering the personal number the error display " "Settings for word processing system are wrong"
then i check feature set word processing system.
plz anybody guide me how to resolved this problem
thanks
urvashi

Hi Urvashi,
Please check the following in your system:
- Go to PE03
- feature 'WPROC'
- select 'Attributes'
- press 'Display'
- press 'Struct.'
- there you will find the Basic information 'Passing type'
This must be set to '2' (Table Transfer). If this is set
to '1' i.e. please change this entry.
Hope this help
Sarah

Recruitment: ERROR -- Settings for Word Processing System are wrong

Hi All,
SAP System: 4.7.
In both cases wheteher I configure feature WPROC to return value as :
1) RTF - so that MS Word woulds be used for applicant letters, OR
2) ' ' - so that SAP Script Editor is used for applicant letter.
get the same error while I try to run transaction PB60
<b>ERROR: Settings for word processing system are wrong.</b>
But the very same settings are working in IDES.
Can you tell me where have I possibly gone wrong or what am I overlooking ?
Regards,
Amit

Hi Urvashi,
Please check the following in your system:
- Go to PE03
- feature 'WPROC'
- select 'Attributes'
- press 'Display'
- press 'Struct.'
- there you will find the Basic information 'Passing type'
This must be set to '2' (Table Transfer). If this is set
to '1' i.e. please change this entry.
Hope this help
Sarah

ISE default settings for "ISE - Process Status"

Please put default settings for alerts "ISE - Process Status" for CiscoISE (PAN / Operations / Alarms / Rules / Criteria / Monitor Processes).
For example, for version 1.1.4.218 for virtual machines.
Thanks in advance!

Hi
You can view process status for the network from the Cisco ISE dashboard using the System Summary dashlet. For example, when processes like the application server or database fail, an alarm is generated and you can view the results using the System Summary dashlet.
One of the requirements for creating an alarm rule is that you assign it to a schedule. The following task shows you how to create an alarm rule, and then assign it to a schedule.
The following default alarm rules are shown in the user interface:
• ISE - AAA Health
• ISE - Process Status
• ISE - System Errors
• ISE - System Health
You can create these alarm rules using the following procedure:
• Passed Authentication
• Failed Authentication
• Authentication Inactivity
• Authenticated But No Accounting Start
• Unknown NAD
• External DB Unavailable
• RBACL Drops
For more information about configuration etc please go through this link:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_ug.pdf
at page no.928

How to set tagged pdf settings for batch process

Framemaker doesn't allow me to set tagged pdf settings without opening a file (i.e. *.mif/*.fm/*.book).We are using .MIF files to generate PDF in an automated process.( .MIF files will be sent to FrameMaker as a batch file using DZBATCHER then it it uses distiller to produce the PDF).
How can I set tagged PDF settings for this kind of operation?

Tagged PDF info is a document level property, i.e. you need to define it in the MIF. Check your MIF manual for: <DPDFStructure and <DPDFStructureDefined statements.
Note: If you're using any FM version earlier that FM9 and not the FrameServer version, please read your EULA very carefully (Section 2.2 - 2.4) concerning automated creation of PDF files. With FM9, the restriction apparently has been loosened to only how the process is intiated (Section 2.3).
Copies of the EULAs can be seen here: http://www.adobe.com/products/eulas/

Security Settings For Deleting Process Instance Information

Hi there,
We are currently having issues with our more "novice" users deleting "unsuccessful" or "error" process instances. Are their any security settings we could use for this type of user profile that would not allow them to delet these instances?
This is in PS Financials V8.9
Thanks, Dan
Edited by: user6340243 on 5-Mar-2009 9:58 AM

Hi Dan,
Yes you can do that. The process file associated with the Userid is not having Permission to alter process request.
Identify the Process Profile permission list:
Navigation: PeopleTools > Security > User Profile
Make changes to the Process profile permission list:
Navigation: PeopleTools > Security > Permission Lists
Select the appropriate process profile permission list.
Go to 'Process' Tab. Click on 'Process Profile Permissions' hyper link. Under 'Allow process request' section should be changed to Owner or none based on your requierment.
Hope this helps.
Regards,
Pratheepan

ALE Settings for IDOC Processing

Hi,
Can anybody tell me what all the ALE settings I have to look for any IDOC.
Thanks,
bsv.

Hi,
Please check this link for ALE setup for inbound and outbound processes.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
Regards,
Ferry Lianto

Settings for IDoc Processing Maintain Partner Profile Manually

Hi Everybody,
I just wanted to maintain a partner profile for IDoc Outbound Processing in CRM7.0. The Partner Type is LS (Logical System).
Now, when I'm creating an Outbound Parameter and want to save, I get an Error Message that the field package size must be > 0.
The problem is, that there is no field Package Size. In older systems there is such a field under the field receiver port.
Anyone any idea where is the missing field or another solution.
Thanks and regards,
Sebastian
PROBLEM SOLVED !!
When you get the error message, press enter several times and the field appears. Incredible.... but true.
Edited by: Sebastian Wilhelm on Sep 3, 2009 4:06 PM

Hi,
Steps to do ALE Configuration with respect to IDOC:
Configuration in R/3:
1. Create a RFC destination using Transaction = SM59
2. Create the ports using we21 and refer the port to the created RFC dest in above Step.
3. Create a Logical System using Transaction BD54.
4. Create a partner profile using transaction WE20.
Also need to configure in XI:
1. Create a RFC destination using Transaction = SM59
2. Create the ports using Transaction IDX1 and refer the port to the created RFC dest in above Step.
3. The port has to be displayed in the IDX2 transaction and we should be able to view the idocs which we imported through integration repository otherwise we have to manually import the idocs from IDX2 using the port created above
Also refer to the link below for further details:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Regards,
Nithiyanandam

Selection report for action processing in background

Hi,
in GTS-Export you have the possibility to start an activity with a selection report. Exist already an example report in the system or have somebody an example available?
Thanks.
Kind regards
Frank

Hai friend,
Are you talking about AES , if so, this is more of a config activity check the follwoing
SAP Global Trade Services u2192SAP Customs Management u2192 General Settings u2192 Communication Processes u2192 Define Conditions and output Parameters for Comm. of Cust. Ship. & Cust. Dcl
SAP Global Trade Services u2192 SAP Customs Management u2192 General Settings u2192 Communication Processes u2192 Define Control Settings for Communication Processes
also go thru
Preferred Practice USu2013Automated Export Systems (US-AES) in sap
thanks
Ramesh

Best Compostion Settings for DVD output

I am working on a project that does involve some regular DV footage but the vast majority of the footage will be animation movs exported from After Effects. These movies are simply pans and zooms on still photos done in After Effects.
What I'm wondering is what sequence settings I should use.
The final output will be to DVD and it will be viewed mainly on TVs, not computers.
One thing I hate is when I do these still pics and on a TV they look jittery or shimmery or alias-y or whatever it's called.
Is there some way to avoid this?
Is it possible to do a movie in progressive scan even though some of the footage is DV?
How about when exporting from AE? Should I use the DV setting or the progressive setting?
Any thoughts will be very helpful.
Thanks,
S

David,
Your answer "Depends on what is causing the problem. Could be one of (or a combination of) many things; resolution too high, areas of fine detail in the image, poor scan, dimpled/textured photo paper, patterns within the image, areas of high contrast within the image, etc. Each of these problems needs to be addressed individually for each photo." intrigues me.
We are scanning the photos as high res (3000x2000 in some cases) TIF files to allow for panning and zooming. They are B+W and do often have high contrast. They also often have areas of fine detail. I don't think poor scanning or dimpled paper are issues.
Could you offer any ideas on how to fix these images for TV viewing? I will say that I have read other posts on here about using deinterlace, flicker filter, etc and I am never pleased with the way the image is degraded with these filters.
The best I have found is to use a slight blur. On this forum people often say less than .5 pixels but that is never enough to eliminate the flicker, shimmer, what-have-you. I am often forced to use a gaussian blur of 1 to 1.5 pixels.
What I don't like about this is how it then looks on a computer monitor (should people pop the DVD into watch on their home computer). On a TV the images generally look fine.
Any ideas?
Do you think just sticking with regular NTSC DV sequence settings is appropriate?
What about sequence settings for video processing? Would it help at all to use "high quality YUV" rather than "8 bit YUV" since these are animation movies of still pics?
Thanks for the help,
S

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Questions on cache and general RSRT settings for plancube

Hi,
we would like to:
1) set request status 1 in RSRT for our planqueries, in order to automatically refresh the query after executing a planfunction (problem we have now is that the results of a planfunction are not automatically updated in the query. Only when doing something else like executing other function, saving, check locks, ... the results are visible).
2) activate delta cache for our planqueries
we have read OSS note 1136163 on RSRT settings. It says:
Aggregation level "A" is implemented internally by the automatically created query "P/!!1P" (plan buffer query). This query acts like an InfoProvider. It reads the data of the database or provides the data from InfoProvider "P", it adds the data of the delta buffer "Dp" (or the delta buffer Dpi if P is a MultiProvider with several PartProviders Pi that can be planned) and transfers the data manager as data of the InfoProvider "A" of type "ALVL". The query "P/!!1P" can use aggregates and the cache; this is exactly like each normal query in "P". If "P" is a MultiProvider, it is useful to set PARTITIONMODE to "1".
              For the query "P/!!1P" that is created automatically for an aggregation level or for all aggregation levels using the InfoProvider P, we recommend the following setting:
              Read mode "H", request status "1", cache mode "1" or higher, delta cache "true" and SP grouping "1".
              Furthermore, the selection to use the structure element (KIDSEL) should be "true".
              The input-ready queries in "A" should not, and cannot, use a cache. The request status is irrelevant since queries in "A" are automatically set to current data. The delta buffer does not currently support hierarchy processing. Therefore, aggregation level "A" cannot completely support read mode "H". For input-ready queries at A:
              Read mode "X", request status "0", cache mode "0".
             The delta cache and SP grouping are not visible
Problems we have:
1) for query P/!!1P (PCA_AGQF/!!1PCA_AGQF in our example) does not allow changing the request status (greyed out). It now has value 0 instead of 1. It also does not allow to activate the delta cache flag. How to change this? In RSDIPROP we have set partitionmode to 1 for the multiprovider and activated the delta cache flag...
2) can we use the cache / delta cache principle for our planqueries? If so, how to ensure these settings remain activated in RSRT?
regards
Dries
regards
dries

Hi,
To change the cache settings for your cube.
Open the cube in RSA1 and click in 'Chance'.
- click in the 'Environment' menu;
- expand 'InfoProvider Properties'
- select the option 'Change'.
You will be able to set the cache mode for this provider.
I don't think it will be possible use cache for a multiprovider, it is
not possible.
Regards,
Amit

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

Settings for paralel processing

Similar Messages

Maybe you are looking for