Settings in XI side to receive IDOC from application server

Could somebody verify the following stmt regarding
Settings in XI side to receive IDOC from application server
The metadata for the idoc should be in place before sending idoc from the application system

Hi Vasanthakumar,
have a look at those settings by Shravan:
Re: Steps to define correctly IDoc sender adapter
you don't have to do point 4
Regards,
michal

Similar Messages

Ale settings when receiving idoc from xi

Hi friends,
I wan o confirm that the settings I had done in my R/3 system for receiving idoc from Xi are correct.
Third party is goin to send message to my Xi system, from there I have to send that message to my R/3 system.
In R/3 I had created 2 logical system,one for r/3 itself and other for my XI system.
I assigned client to this systems.
I created RFC and port for XI.
Then created distribution model, with sender as xi logical name ,receiver as R/3 logical name.
Is this configuration correct?or I need to create the thirdparty logical system also in my R/3 system?

Hi,
Your steps looks fine to me. I think distribution model is not required for inbound case.
just check the below configuration once again.
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Also look at the step by step process.
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
chirag
Edited by: Chirag Gohil on Nov 24, 2008 1:23 PM

Receiving IDocs from non-SAP system ...

Hello guys,
I have problem with implementing IDoc-XI-IDoc scenario. The sender system is a subsystem (non-SAP system) sending IDocs but XI is not able to receive them. I thing the IDoc metadata can not be found.
Logical system name of the sender is IF6020DEV. I registered the system in SLD. In Integration Directory I imported the Bussines System IF6020DEV to my scenario and I created communication channel of type Sender IDoc Adapter in it.
In IDX2 I created new port called IF6020DEV and I copied needed metadata into the port. But it doesn't work. Probably I don't do it right because I'm beginner with SAP XI.
Could you give me any advice how to configure XI for receiving IDocs from non-SAP system?
Thank you in advance!
Regards
Zbynek

Thank you very much. The issue described in refered discussion is almost same issue what I'm solving. Unfortunetally the described solution dosn't work for me.
The sender system still returns following error. I know you probably won't understand it because you don't know the subsystem, but maybe you could get some idea what is wrong.
05/29/09 16:09:19.482 idoup2 Logon...
05/29/09 16:09:19.482 idoup2 RfcOpenEx (TRACE=1 CLIENT=110 USER=xxxxxx LANG=D LCHECK=1 GWHOST=xxxxxx GWSERV=3361 ASHOST=xxxxxxx SYSNR=61 PASSWD=<password>)
05/29/09 16:09:19.529 idoup2 Logon RfcOpenEx result=1
05/29/09 16:09:19.607 idoup2 Call to (IDOC_INBOUND_ASYNCHRONOUS) failed (3)
05/29/09 16:09:19.607 idoup2 Handle=1
05/29/09 16:09:19.607 idoup2 key............:
05/29/09 16:09:19.607 idoup2 status.........:
05/29/09 16:09:19.607 idoup2 message........:IDoc-Adapter Eingang: Der Absenderport ist initial
05/29/09 16:09:19.607 idoup2 internal status:
05/29/09 16:09:19.607 idoup2 idoc_upload failed with rc=(3), try(2)
05/29/09 16:09:20.607 idoup2 key............:IDoc-Adapter Eingang: Der Absend
05/29/09 16:09:20.607 idoup2 status.........:EXCEPTION SYSTEM_FAILURE RAISED
05/29/09 16:09:20.607 idoup2 message........:IDoc-Adapter Eingang: Der Absenderport ist initial
05/29/09 16:09:20.607 idoup2 internal status:
05/29/09 16:09:20.607 idoup2 idoc_upload failed with rc=(18), try(1)
05/29/09 16:09:21.607 idoup2 Logoff...

Is it possible to receive IDOCs from a non-SAP system?

Hi,
I'm facing a problem where I have to configure SAP MII (12.0) to receive IDOCs from a non-SAP client. Is it possible? I'm dealing with a system named Hydra (developed by MPDV) and I'd like to know what I should configure in Hydra systems in fields like: PROGID, GWHOST, GWSERV, SYSNR, CLIENT etc.
Anyone can help me?
Thanks a lot in advance

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it show

The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938

Could not receive classifications from UDDI server. Please change the UDDI.

Hello:
   Im trying to connect from CE in Visual Composer to the
    UDDI url: http://xi.esworkplace.sap.com:50200/uddi/wsdl/uddi_v3_service.wsdl
   but when I try to explore advance search in VC it shows me the following error:
   Could not receive classifications from UDDI server. Please change the UDDI server.
   Any idea?
Thanks
Regards
Mario G

Hi,
The one that Mario is saying is not in NWDS its in CE I guess. I too face the same difficulty. I give the following details that I did in my local CE. After saving the setting I tried to clickd service registry I get some list of errors. Kindly help me and Mario in resolving this. Thanks in advance.
Between Mario the URL of the UDDI and classification is changed now... please note the details that I have set.
==================================
Destination Type: WSDL
Destination Name: UDDI_DESTINATION
URL: http://sr.esworkplace.sap.com/uddi/wsdl/uddi_v3_service.wsdl
System: Java
Authentication : HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Destination Type: WSDL
Destination Name: CLASSIFICATION_DESTINATION
URL: http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl
System: Java
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Create new destination Create new backend destination HU2
Destination Type: Services Registry
Destination Name: HU2
System: ABAP
System Name: HU2
Hostname: iwdf1030
Installation Number: 0120003411
Client: 800
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: <your user in HU2>
Password: <your password>nation CLASSIFCATION_DESTINATION
==============================================
Best Regards,
Suresh

File from application server-- Email ?

Hi,
I need to pickup a file from application server and Email the same to the intended receipents through ABAP program
For that i had used the following code:
REPORT ZEMAIL_APP_SER_FAIL.
DATA :is_doc_chng        TYPE sodocchgi1,
      it_objtxt          TYPE STANDARD TABLE OF solisti1,
      is_objtxt          TYPE solisti1,
      it_objpack         TYPE STANDARD TABLE OF sopcklsti1,
      is_objpack         TYPE sopcklsti1,
      it_objbin          TYPE STANDARD TABLE OF solisti1,
      is_objbin          TYPE solisti1,
      it_reclist         TYPE STANDARD TABLE OF somlreci1,
      is_reclist         TYPE somlreci1,
      w_lines_tx         TYPE i.
** Create Message Body
**   Title and Description
*is_doc_chng-obj_name = 'MAIL'.
is_doc_chng-obj_descr = 'Auto genareted Mail from Application server'.
** main text
is_objtxt-line = 'This is an automatically generated mail. Please do not reply to it.'(028).
APPEND is_objtxt TO it_objtxt.
is_objtxt-line = space.
APPEND is_objtxt TO it_objtxt.
*   write packing list (main)
DESCRIBE TABLE it_objtxt LINES w_lines_tx.
READ     TABLE it_objtxt INTO is_objtxt INDEX w_lines_tx.
is_doc_chng-doc_size = ( w_lines_tx - 1 ) * 255 + STRLEN( is_objtxt ).
CLEAR is_objpack-transf_bin.
is_objpack-head_start = 1.
is_objpack-head_num   = 0.
is_objpack-body_start = 1.
is_objpack-body_num   = w_lines_tx.
is_objpack-doc_type   = 'CVS'.
is_objpack-OBJ_NAME   = 'GIND_EXP'.
is_objpack-Obj_langu = 'E'.
APPEND is_objpack TO it_objpack.
is_reclist-receiver = 'XXX'@'YYY'.COM'.
is_reclist-rec_type = 'A'.
Break-point.
*is_reclist-REC_ID   = 'XXX@YYY'.COM'.
APPEND is_reclist TO it_reclist.
CLEAR is_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
   document_data              = is_doc_chng
   put_in_outbox              = 'X'
   commit_work                = 'X'
TABLES
   packing_list               = it_objpack
   contents_txt               = it_objtxt
   receivers                  = it_reclist
EXCEPTIONS
   too_many_receivers         = 1
   document_not_sent          = 2
   document_type_not_exist    = 3
   operation_no_authorization = 4
   parameter_error            = 5
   x_error                    = 6
   enqueue_error              = 7
   OTHERS                     = 8.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
when i execute this program:
I get the following error msg:
Activation setting not yet maintained
May i know what is the problem?

If you are sending an email, the receiver type should be U (internet mail address type). From your code it appears that you have input it as 'A'. I am not sure if the error message is related to this. Have you checked in transaction SOST, whether an email has been triggered from your program? At what point of execution is this error message triggered?

How to get data from application server

hi experts,
when i load data from application server(.csv file) to ODS, data all goes one column.
in infopackage exterdata tabstrip i have given the below values.
escape sign is "
data separator is ,
separator for thousands is ,
my sample data:
"1010000";"A410";"03.2008";"113.5704531"
"1010000";"A410";"04.2008";"93.1146410"
any ideas..
Siri

Hi Siri,
You should look in the T.Code :RSCUSTV1
BW:Settings for Flat File
Thousand separator
Dec. point separator
Field separator
Field delimiter
Then you can use the Same Characterstics while creating the Flat file & also passing the same in Info Package
This will resolve your issue
Regards
Hari

Error while loading data from application server

Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
Praveen

It looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian

Problem while dowloading the file from Application Server

Dear Experts,
I am facing the Problem while downloading the file from Application server.
We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
Please help me to solve this issue.
Thanks & Regards,
Srini

but our user will use the Txn. AL11 and they will download from there
Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
Hope i'm clear.
BR,
Suhas

Split tab delimited file coming from application server.

Hi,
i have received a tab delimited file from the application server.it contains # instead of tab at the application server.
i want to know how to split it.
i tried decalring constant as:
c_tab type x value'09'.
but it gives an error saying only c,n,d and t types are allowed.
please gelp.
Thanks,
Anand.

Hi,
Do like this
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
*--Close dataset
CLOSE DATASET l_file.
Regards,
Prashant

ERROR - No Response from application server

Hi all,
i'm hitting this error in my application server, i search and read some posts in this forum regarding the same subject, but, the only answer i got is "shutdown app server and start again"
It's very important that i understand and correct what is origin of this error , so i decided to create a new post.
My environment.
Oracle Application Server 9.0.4 (10g) under windows 2003.
Several users, from serveral applications reported then got "No Response from application server".
Here's what i got from logs:
WebCache (event.log)
[28/Sep/2007:15:37:07 +0100] [warning 14014] [ecid: 4522403843773,0] Receive request from origin server times out.
[28/Sep/2007:15:37:07 +0100] [error 11364] [ecid: 4642662928061,0] Network error response is returned.
[28/Sep/2007:15:37:07 +0100] [error 11364] [ecid: 4522403843773,0] Network error response is returned.
[28/Sep/2007:15:37:12 +0100] [detail] [ecid: 4333425287762,0] [client: 10.41.6.31] [host: bb-9ias] [url: /cotacoes/acor_cotConsPed.jsp]
[28/Sep/2007:15:37:12 +0100] [warning 14014] [ecid: 4333425287762,0] Receive request from origin server times out.
[28/Sep/2007:15:37:12 +0100] [error 11364] [ecid: 4333425287762,0] Network error response is returned.
[28/Sep/2007:15:37:14 +0100] [detail] [ecid: 4711382411904,0] [client: 10.40.51.10] [host: bb-9ias] [url: /wf_prod/acor_agendaNovasColoc.jsp?jboEvent=Sort&'pFlgDadosPesq=&'pFlgComPesq=&'pFlgEspPesq=&'pFlgGerPesq=&'pFlgTempoPesq=&'pRamoPesq=&'pDataPesq=&'pEscPesq=&'U
iNome=&'pMediadorNome=&'pEstPesq=&'jboEventVo=AgendaProcVO&'amId=Bc4jModule&'pParamSort=MED_NOME&'pSort=asc]
[28/Sep/2007:15:37:14 +0100] [warning 14014] [ecid: 4711382411904,0] Receive request from origin server times out.
[28/Sep/2007:15:37:14 +0100] [error 11364] [ecid: 4711382411904,0] Network error response is returned.
[28/Sep/2007:15:37:27 +0100] [detail] [ecid: 4402144779094,0] [client: 10.44.1.48] [host: bb-9ias] [url: /wf_prod/acor_editaProc.jsp?proc=61063&'dt=1190990239312&'pFlgDadosPesq=&'pFlgComPesq=&'pFlgEspPesq=&'pFlgGerPesq=&'pFlgTempoPesq=&'pRamoPesq=&'pDataPesq=&'pEscP
sq=&'UtiNome=&'pMediadorNome=&'pEstPesq=Emissão%20de%20Titulares&'pSort=desc&'pParamSort=PRO_DAT_INICIO&'linha=2]
[28/Sep/2007:15:37:27 +0100] [warning 14014] [ecid: 4402144779094,0] Receive request from origin server times out.
[28/Sep/2007:15:37:27 +0100] [detail] [ecid: 4608303209302,0] [client: 10.40.62.8] [host: bb-9ias] [url: /cotacoes/acor_cotRamos.jsp?pTime=1190989207512&'pKey=31094&'jboEvent=Mostra%20Ramo%20L&'ecra=consCot&'PrId=37412&'PedCompanhia=CSA&'PedTipo=C&'SitCodigo=2&'Sit
escr=Em%20Execução&'PedNumero=&'PedMediador=&'EscDireccao=&'EscZona=&'EscEscritorio=&'PedNome=&'PedDataI=&'PedDataF=&'pRamCodigo=&'pSitCodigo=&'Code=&'pParamSort=null&'pSort=null&'value=null&'RamCodigo=9&'RamDescr=Multi-Riscos%20Comercio%20(MP%20Negócio)]
[28/Sep/2007:15:37:27 +0100] [warning 14014] [ecid: 4608303209302,0] Receive request from origin server times out.
[28/Sep/2007:15:37:27 +0100] [error 11364] [ecid: 4608303209302,0] Network error response is returned.
[28/Sep/2007:15:37:27 +0100] [error 11364] [ecid: 4402144779094,0] Network error response is returned.
[28/Sep/2007:15:37:45 +0100] [detail] [ecid: 4007007807211,0] [client: 10.40.15.7] [host: bb-9ias] [url: /ConsultaSinistros/DadosSubSin.jsp?nid_claim=351017&'vn_claim=9001151241&'tstamp=1190990264562]
Apache (error.log)
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0121: Failed to service request with network
worker: oc4j_consultasinistros_15 and it is not recoverable.
[Fri Sep 28 15:37:45 2007] [error] [client 10.42.48.237] [ecid: 4007007807211,1] MOD_OC4J_0013: Failed to call destination: oc4j_consultasinistros's
service() to service the request.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0121: Failed to service request with network
worker: OC4J_FerrProdutividade_13 and it is not recoverable.
[Fri Sep 28 15:37:55 2007] [error] [client 10.42.48.237] [ecid: 9418666609387,1] MOD_OC4J_0013: Failed to call destination: OC4J_FerrProdutividade's
service() to service the request.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0035: After handling ajp13 response message,
got an invalid value: -2.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0121: Failed to service request with network
worker: OC4J_FerrProdutividade_13 and it is not recoverable.
[Fri Sep 28 15:38:34 2007] [error] [client 10.42.48.237] [ecid: 9298407565065,1] MOD_OC4J_0013: Failed to call destination: OC4J_FerrProdutividade's
service() to service the request.
[Fri Sep 28 15:38:37 2007] [error] [client 10.42.48.237] [ecid: 8954810184060,1] MOD_OC4J_0080: After calling Apache's ap_bwrite(), got
an return value: -1 and the client could have aborted in the middle of receiving the chunk data.
[Fri Sep 28 15:38:37 2007] [error] [client 10.42.48.237] [ecid: 8954810184060,1] MOD_OC4J_0058: Failed to handle response chunk data passed
in from oc4j via ajp13.
some thoughts ...This error is not happening consistently, it triggers near the end of month ,naturally the amount of requests in the end of month is higher .. am i hitting som e limit ?
Best Regards
Rui Madaleno

Network error response is returned.
hi all,
i'm hitting this error in my application server, i search and read some posts in this forum regarding the same subject, but, the only answer i got is "shutdown app server and start again"
My environment.
Oracle Application Server 9.0.4 (10g) under solaris 9.
Several users, from serveral applications reported then got "No Response from application server".
Here's what i got from logs: LOGS event_log WEBCACHE
[08/Oct/2008:11:59:37 -0430] [detail] [ecid: 101795743162,0] [client: 172.19.1.120] [host: shcontingencia:7778] [url: /forms90/l90servlet;jsessionid=ac13041fce663ec96491934459ca516f5215b31fb0c.qQvxpQTOokTBnkTxok4UaNaKaxD3lN4RawSLcgSO-xaL-xbzmQnAnwSLak8RnhfzbNqKc2SHc30Ka2bvmRbzp3zD-BbCmQXIr6zInQjImQzv8N8Sc38MbNmLa2b48OX3b4DteyztfAXMplaxn6jAmljGr5XDqQLvpAe_]
[08/Oct/2008:11:59:37 -0430] [warning 14003] [ecid: 101795743162,0] Error while receiving response from the origin server
[08/Oct/2008:11:59:37 -0430] [error 11364] [ecid: 101795743162,0] Network error response is returned.
[08/Oct/2008:12:50:55 -0430] [detail] [ecid: 88913989443,0] [client: 172.19.1.39] [host: shcontingencia:7778] [url: /forms90/l90servlet;jsessionid=ac13041fce67b31f32050664119ba348b92e845aaa4.qQvxpQTOokTBnkTxok4UaNaKaxD3lN4RawSLcgSO-xaL-xbzmQnAnwSLak8RnhfzbNqKc2SHc30Ka2bvmRbzp3zD-BbCmQXIr6zInQjImQzv8N8Sc38MbNmLa2b48OX3b4DteyztfAXMplaxn6jAmljGr5XDqQLvpAe_]

No Response From Application Server - How To over come this error message

I am Using Oracle 10g Application server. if we run a report from our front end - jsp , if the transaction takes more than 10 minutes then 'No Response From Application Server ' error message is coming in browser. How to over come this. whether i have to set any transaction time in application server. If anybody knows this kindly give reply immediatly.

There are settings in the reports configuration to modify your timeout. This is documented in the repors config file itself.
cu
Andreas

Read xml filr from application server

Hi I want to read an XML file from application server. can anyone please give me the sample code?
Please its very urgent,
Thanks

Hello
The following sample report <b>ZUS_SDN_BCCIIXMLT2</b> (modified from BCCIIXMLT2) shows how to upload an XML file from the application server.
If the structure of the XML is according to the structure of a DDIC structure then you can directly convert the XML into the DDIC record using the transformation ID (= identical) which is used to convert ABAP to XML and vice versa.
* BCCIIXMLT2 - sample program
* This sample program shows how to read an XML document from a file
* in the appserver's file system, parse the document into a DOM
* representation and display the content as a list.
* Additionally the DOM representation is rendered back into an XML
* stream and stored as an output XML file on the appserver machine.
* This sample program uses ABAP strings to represent the XML input
* and output streams. See BCCIIXMLT1 for using internal tables.
REPORT zus_sdn_bcciixmlt2 MESSAGE-ID bcciixmlt3_msg LINE-SIZE 1000.
DATA:
gd_rc     TYPE sysubrc,
go_doc    TYPE REF TO cl_xml_document.
START-OF-SELECTION.
PARAMETERS: filename(80) TYPE c
          DEFAULT 'tempIDoc_430040.xml'. "#EC NOTEXT
*-- read the XML document from a dataset into a string
DATA: inputstring TYPE xstring.
OPEN DATASET filename FOR INPUT IN BINARY MODE.
IF sy-subrc NE 0.
    MESSAGE e000.
ENDIF.
READ DATASET filename INTO inputstring.
CLOSE DATASET filename.
CREATE OBJECT go_doc.
CALL METHOD go_doc->parse_xstring
    EXPORTING
      stream = inputstring
    RECEIVING
      retcode = gd_rc.
CALL METHOD go_doc->display
*    EXPORTING
*      WITH_BDN = SPACE
*-- create the main factory
DATA: pixml TYPE REF TO if_ixml.
pixml = cl_ixml=>create( ).
*-- create the initial document
DATA: pdocument TYPE REF TO if_ixml_document.
pdocument = pixml->create_document( ).
*-- create the stream factory
DATA: pstreamfactory TYPE REF TO if_ixml_stream_factory.
pstreamfactory = pixml->create_stream_factory( ).
*-- create a stream for the input (string)
DATA: pistream TYPE REF TO if_ixml_istream.
pistream = pstreamfactory->create_istream_xstring( inputstring ).
*-- create the parser
DATA: pparser TYPE REF TO if_ixml_parser.
pparser = pixml->create_parser( stream_factory = pstreamfactory
                                    istream       = pistream
                                    document      = pdocument ).
*-- parse the stream
IF pparser->parse( ) NE 0.
    IF pparser->num_errors( ) NE 0.
      DATA: count TYPE i.
      count = pparser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.          "#EC NOTEXT
      DATA: pparseerror TYPE REF TO if_ixml_parse_error,
            i TYPE i.
      DATA: index TYPE i VALUE 0.
      WHILE index < count.
        pparseerror = pparser->get_error( index = index ).
        i = pparseerror->get_line( ).
        WRITE: 'line: ', i.                                 "#EC NOTEXT
        i = pparseerror->get_column( ).
        WRITE: 'column: ', i.                               "#EC NOTEXT
        DATA: string TYPE string.
        string = pparseerror->get_reason( ).
        WRITE: string.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*-- we don't need the stream any more, so let's close it...
CLEAR pistream.
*-- just for fun: render the DOM back into an output stream/xstring
DATA: postream TYPE REF TO if_ixml_ostream,
        outputstring TYPE xstring.
postream = pstreamfactory->create_ostream_xstring( outputstring ).
CALL METHOD pdocument->render( ostream = postream ).
*-- write the XML document as a dataset
DATA: dsn(80) TYPE c.
CONCATENATE filename '.out' INTO dsn.                     "#EC NOTEXT
OPEN DATASET dsn FOR OUTPUT IN BINARY MODE.
TRANSFER outputstring TO dsn.
CLOSE DATASET dsn.
*-- print the whole DOM tree as a list...
DATA: pnode TYPE REF TO if_ixml_node.
pnode = pdocument.
PERFORM print_node USING pnode.
*       FORM print_node                                               *
FORM print_node USING value(pnode) TYPE REF TO if_ixml_node.
DATA: indent      TYPE i.
DATA: ptext       TYPE REF TO if_ixml_text.
DATA: string      TYPE string.
indent = pnode->get_height( ) * 2.
CASE pnode->get_type( ).
    WHEN if_ixml_node=>co_node_element.
      string = pnode->get_name( ).
      WRITE: AT /indent '<', string, '> '.                  "#EC NOTEXT
    WHEN if_ixml_node=>co_node_text.
      ptext ?= pnode.
      IF ptext->ws_only( ) IS INITIAL.
        string = pnode->get_value( ).
        WRITE: AT /indent string.
      ENDIF.
ENDCASE.
pnode = pnode->get_first_child( ).
WHILE NOT pnode IS INITIAL.
    PERFORM print_node USING pnode.
    pnode = pnode->get_next( ).
ENDWHILE.
ENDFORM.                    "print_node
Regards
Uwe

Process Chain - Delete File from Application Server

Hi Gurus,
Im working with Process chain, and i have a load from a flat file, so my question is :
How can i delete that file from the application server after was loaded ?
THANKS IN ADVANCED !!! I REALLY APRECCIATE YOUR HELP.
Marcos

hi,
I have gone through the forum you have posted for deleting files from application server through process chain.
I have similar reuirement in my project.
Can you please provide me the solution?
Your inputs will be highly appreciated.
Thanks in advance.
Regards,
Lavanya.

Settings in XI side to receive IDOC from application server

Similar Messages

Maybe you are looking for