Setup 'addressable client' for reliable messaging

Hello,
I have a use case where I have to make a reliable call to JAX-RPC Webservice from BPEL. Reliable messaging policy is attached to JAX-RPC webservice that BPEL is invoking. For BPEL to successfully invoke JAX-RPC webservice with reliable messaging setup, I am told that I need to setup an 'addressable client'.
Is there any documentation on how to set up an 'addressable client' for reliable messaging? Any help is much appreciated.
Thank you

is my topic in the wrong forum category? or is the topic the problem and nobody knows a solution?
I'm looking forward to any answer.
Best regards
matthias

Similar Messages

How to setup HTTP client for HTTP to File scenario

Hey guys
i have a scenario wherein one of our clients is sending invoices(as XML message) over HTTP(client is outside our landscape) and i have to to send this invoice to a File system from where it will be picked up by an ABAP code(picking of the file has to be done by ABAper so i m not concerned with that)
the way i m starting off this project is that
i will create a sender and receiver data type,message type and Message interface,Message mapping is 1-1 so its kinda simple and then Interface mapping.
in configuration i wont be creating and sender communication channel and sender Agreement,i need receiver communication channel,receiver determination and interface determination.
does my design and configuration looks good to you guys?
also i waz goin through some threads and it says that i need to setup HTTP client for this scenario and then specify a URL in a specific format.
where will i setup the HTTP client and where will i specify the URL?
thanx
ahmad

Ahmad,
><i>does my design and configuration looks good to you guys?</i>
Is correct.
><i>where will i setup the HTTP client and where will i specify the URL?</i>
Take a look at this thread and check the HTTP Client code.
Copy the code and save it as a HTML file and you have the HTTP Cliet ready. GIve the details of your server, sender service, interface etc and trigger the call to XI.
In a real time scenario, you will need to use the URL used in the HTTP Client code from your WebApplication to trigger the call to XI.
/message/266750#266750 [original link is broken]
Regards
Bhavesh

Address filter for text messaging

Is there a way to have the iPhone filter all non-mobile numbers when searching for names from contacts in the address box for a text message? It doesn't make much sense to pull up fax numbers, home numbers, etc. for a contact when I can only text to a mobile number.

Is there a way to have the iPhone filter all non-mobile numbers when searching for names from contacts in the address box for a text message?
No.
It doesn't make much sense to pull up fax numbers, home numbers, etc. for a contact when I can only text to a mobile number.
In some countries (like the UK) you can send text messages to non-mobile numbers.

Have you a simple client for send message on oc4j 9.0.2.0.0 ?

Hi to All!
Have you a simple client to send message on a queue in OC4J 9.0.2 ?
Can you show me how is possible to write the config file to connect to oc4j application server?
thanks very much
Andrea

I added -Xcheck:jni and -Xcheck:nabounds to the command line and got this one now :
500 Internal Server Error
Error parsing JSP page /westflo-fsweb/main/header.jsp
Error creating jsp-page instance: java.lang.ClassFormatError: __jspPage8_main_header_jsp (Method "pushBody" has illegal signature "()Ljavax/servonInfo.classjavax/servlet/j")
My whole command line is :
/usr/java130_wei/bin/java -ms128m -mx256m -Xcheck:jni -Xcheck:nabounds -Xnoclassgc -verbosegc -Duser.dir=/usr/oc4j/j2ee/home -Denvironment=DEV2GMSFS -Dwestflo.dir=/website/DEV2/GMSFS/oc4j_instance2/westflo/westflo/ -Ddeployment.dir=/website/DEV2/GMSFS/oc4j_instance2/pie/gms/ -Demissionrc.dir=/website/DEV2/GMSFS/oc4j_instance2/emissionrc/emissionrc-web/ -jar /usr/oc4j/j2ee/home/oc4j.jar -out /website/DEV2/GMSFS/oc4j_instance2/oc4j_config/log/server.log -err /website/DEV2/GMSFS/oc4j_instance2/oc4j_config/log/oc4j.err -config /website/DEV2/GMSFS/oc4j_instance2/oc4j_config/config/server.xml

Need example for reliable messaging over http in oracle service bus 10g

Hi
i want to setup the reliable proxy service that will poll the end system if it is down and send msg when it is up
i dnt kw how to do it.
i used WS-policy XML and set out the timeout interval and all other properties.
and used WS transport protocol in proxy service.
but when i request if wait for the timeout i have specified in WS-policy and than show this msg
<soapenv:Envelope      xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
     <soapenv:Body>
     <soapenv:Fault>
     <faultcode>soapenv:Server</faultcode>
     <faultstring>
     BEA-381412: Conversation timed out.
weblogic.messaging.saf.SAFTransportException: Send failed
     </faultstring>
     <detail>
     <con:fault      xmlns:con="http://www.bea.com/wli/sb/context">
     <con:errorCode>BEA-381412</con:errorCode>
     <con:reason>
     Conversation timed out.
weblogic.messaging.saf.SAFTransportException: Send failed
     </con:reason>
     <con:location>
     <con:node>RouteTo_testwsrmbix</con:node>
     <con:path>response-pipeline</con:path>
     </con:location>
     </con:fault>
     </detail>
     </soapenv:Fault>
     </soapenv:Body>
     </soapenv:Envelope>
It does not send even a single request to the end system.
I want it like :
when i make my end system down it must wait for timeout interval and than send the request when system is up
PLease help me,its urgent.
i have simple create a web service and using the wsdl to use my end system

This exam is currently not available. It will become available again in approximately 8 weeks. You can view the exam topics to begin preparing for this exam on the exam details page http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_451.
There are currently no sample questions available for this exam. You will need to use the exam topics to prepare.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

How to setup SMBX client for work with Windows 2003 server's shared folders?

Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advance

Hi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’

Web Services reliable messaging is not supported in SAP AS 7.0?

In 7.1 documentation, I find that one enables a webservice for reliable messaging by writing @RelMessagingNW05DTOperation annotation.
However I'm shocked to find that in 7.0 documentation, it only talks about some PL/SQL like code (LUW) that one has to implement to have reliable messaging (http://help.sap.com/saphelp_nw70ehp2/helpdata/en/46/9743916d1115ece10000000a114a6b/frameset.htm). As I'm not familiar with LUW, can you confirm that the developer himself has to handle creating sequences, reordering them and guaranteeing exactly once delivery? And the LUW code shown in the link, does it do all this?
Please advice.

Someone please reply. I'm clueless. Are they saying the webservices reliable messaging has already been implemented using ABAP LUW and is available in the workbench? If so how to use it ito create a reliable webservice? Why are they showing some PL/SQL like code then? It is all unintelligible to me as I haven't used any of these.
Edited by: convicted on May 11, 2011 10:59 AM

Does JMS support reliable messaging (store-and-forward) for app clients?

I need to write an enterprise application client (launched with Java web start or packaged with a tool like Sun's package-appclient) that can send messages reliably from Linux to Windows. JMS seems like the obvious solution, so I deployed an EAR file with an MDB and an application client on a Windows machine (running SJSAS 9). I was able to download the client jar file onto Linux and send JMS messages successfully. However, if the Windows machine is not available, the Linux client immediately throws exceptions and fails. Are there any JMS providers that provide a store-and-forward mechanism for enterprise clients, so that if the remote server is not available immediately, messages are delivered later? (Note that the client can't be a servlet or other server-managed component.)
I'd prefer an open-source solution, but this requirement has an extremely high priority for my customer, so I'll use a commercial product if necessary. And if there's something other than JMS that works, that would be fine. (In my case, the messages on the remote side ultimately go to a .NET service, so WS-ReliableMessaging would be ideal, but it looks WS-RM won't be integrated into .NET until Vista, and the current WS-RM implementation is a beta, etc., etc.)
Thanks,
Mike

You could use Apache ActiveMQ
http://incubator.apache.org/activemq/
which supports embedded brokers inside each JVM which can be networked together in a store-forward mechanism so that each application keeps working and store-forwarding messages.
http://incubator.apache.org/activemq/networks-of-brokers.html
or you can use failover transport to handle automatic reconnection...
http://incubator.apache.org/activemq/how-can-i-support-auto-reconnection.html
If you need to communicate with some .Net you can use the NMS - the .Net Messaging API which has a client for ActiveMQ as well...
http://incubator.apache.org/activemq/nms.html
James
http://logicblaze.com/
Open Source SOA

Standalone Web Service clients in NetBeans with Reliable Messaging

Following the WSIT tutorial (http://java.sun.com/webservices/reference/tutorials/wsit/doc/index.html) it's possible to create a Web Service with Reliable Messaging and a servlet client which run perfectly, great, but try and create a standalone client in NetBeans and it immediatly fails.
Basically I created a standard Java application, did New->Web Service Client exactly like I had done in the servlet example and then used the Web Service Client Resources -> Call Web Service Operation context menu to add a Web Service call to my java application.
The relevant code:
try { // Call Web Service Operation
            uk.ac.ox.sddag.glassfish.server.NonSecureWSService service = new uk.ac.ox.sddag.glassfish.server.NonSecureWSService();
            uk.ac.ox.sddag.glassfish.server.NonSecureWS port = service.getNonSecureWSPort();
            int x = 0;
            int y = 10;
            int result = port.add(x, y);
            System.out.println("Result = "+result);
            ((Closeable)port).close();
        } catch (Exception ex) {
            System.out.println("Exception:");
            ex.printStackTrace();
        }Result:
Exception:
javax.xml.ws.soap.SOAPFaultException: com.sun.xml.ws.rm.RMException: WSRM3018: Non RM Request or Missing wsa:Action header
        at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:188)
        at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:130)
        at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:119)
        at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:89)
        at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:118)
        at $Proxy29.add(Unknown Source)
        at nonsecurestandaloneclient.Main.main(Main.java:29)
Caused by: javax.xml.ws.WebServiceException: com.sun.xml.ws.rm.RMException: WSRM3018: Non RM Request or Missing wsa:Action header
        at com.sun.xml.ws.rm.jaxws.runtime.server.RMServerTube.processRequest(RMServerTube.java:343)
        at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
        at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
        at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
        at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
        at com.sun.xml.ws.api.pipe.helper.AbstractTubeImpl.process(AbstractTubeImpl.java:106)
        at com.sun.enterprise.webservice.CommonServerSecurityPipe.processRequest(CommonServerSecurityPipe.java:218)
        at com.sun.enterprise.webservice.CommonServerSecurityPipe.process(CommonServerSecurityPipe.java:129)
        at com.sun.xml.ws.api.pipe.helper.PipeAdapter.processRequest(PipeAdapter.java:115)
        at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
        at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
        at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
        at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
        at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
        at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
        at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
        at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
        at com.sun.enterprise.webservice.JAXWSServlet.doPost(JAXWSServlet.java:176)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:738)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
        at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:411)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:290)
        at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:271)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:202)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
        at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:206)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:150)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:632)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:577)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:571)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1080)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:272)
        at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:637)
        at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:568)
        at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:813)
        at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
        at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
        at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265)
        at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: com.sun.xml.ws.rm.RMException: WSRM3018: Non RM Request or Missing wsa:Action header
        at com.sun.xml.ws.rm.jaxws.runtime.server.RMServerTube.handleProtocolMessage(RMServerTube.java:469)
        at com.sun.xml.ws.rm.jaxws.runtime.server.RMServerTube.processRequest(RMServerTube.java:145)
        ... 45 more
BUILD SUCCESSFUL (total time: 1 second)By removing the Reliable Messaging from the Web Service this error goes away. Initially I thought this error might be being caused by not specifying the WebMethod annotations 'action' parameter, but it's definitely set.
package uk.ac.ox.sddag.glassfish.server;
import javax.jws.WebMethod;
import javax.jws.WebParam;
import javax.jws.WebService;
@WebService()
public class NonSecureWS {
    @WebMethod(action = "add")
    public int add(@WebParam(name = "x") int x, @WebParam(name = "y") int y) {
        return x+y;
}Interestingly, I found that this error also goes away if I add the library webservices-rt.jar from my glassfish libs to the project. Perhaps this is an oversight of NetBeans and should have been added automatically if reliable messaging is enabled, although by default it does have JAX-WS 2.1 jaxws-tools which I'm guessing is for some reason not adequate. JAX-WS version mismatch?

This bug still isn't fixed.
Thank you, adding Glassfish's webservices-rt.jar does fix it.

Please suggest best GUI client for Linux setup?

HI,
I need to setup OBIEE 11g on Linux. Please suggest best GUI client to connect to linux and setup OBIEE.
appreacite for your help.
Thanks
Jay.

Hi Jay,
You can use Xming server for linux. I have downloaded Xming server 6.9.0.31. It worked well with Windows XP(32 bit) as well as Windows 7(32 bit). I have used it for Oracle HTTP Server installation and OBIEE 11g installation
After installing, to start Xming go to command prompt and start. This invokes the Xming application properly when compared to double click starting.Go to cmd. Go to location C:\Program Files\Xming Enter this
Xming.exe :0 -clipboard -multiwindow -ac.
Note: colon zero ended up in a smiley!
You will see Xming popup in your right side. Go to putty session and export your display with this command.
export DISPLAY=172.45.62.143:0.0
Replace the ip address with your system ip address. The above one is example.
Note: If your putty session is in client network, use the ip address that is in Ethernet: client server.
Test if display is exported properly with this clock command which gives a GUI popup of clock.
xclock &
Hope this helps.
Regards,
Amrutha.
Edited by: Amrutha Kalidindi on Jul 29, 2012 2:48 PM

For Working offline - Which one to use - local database caching or reliable messaging?

Hi,
I am working on a mobile application with lcds where there is a feature to be implemented. The user can use the application in airplane mode and be able to automatically send requests to server when he comes online. After some research, I found that I have to use a feature in the documentation called ocasionally conencted clients, which uses local database with dataservice.savecache() and offline adapter. I also found another feature called reliable messaging which takes care of sending the pending requests when the user comes online, but not sure if this feature supports offline mode for longer periods. The documentation mentioned that reliable messaging is only good for transient network disconnects, meaning disconenction for shorter time.
Can anybody please confirm which is the right feature that best suits this requirement?
Thanks,
Swathi.

Hi Ashish,
Thank you so much for the resource. One more question, The code in the resource link, has calls to Dataservice.disconnect() and Dataservice.connect() on the buttons. If my user need not bother to click on those buttons for connections and just set his phone to airplane mode and start working, I am using SocketMonitor class to monitor for network connection and then perform the Dataservice.connect(). In that case, I have problems when network is connected, the data service seems connected automatically some times and not connected other times resulting in errors. I am using autoConenct = true. How can I handle this? Do I have to call disconnect when socket is not available and then call conenct when it is available, things like that? Or Is there any other way to implement this without using SocketMonitor class?
Thanks,
Swathi.

How to setup the client application for the RMI?

Question:
I write a short program of RMI It contain server and client
if server and client are run on localhost they are running ok
but run client application on remote machine it occure issuses.
How to setup the client on remote machine?

hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

How to setup the 'Client Licensing Mode' for Windows server?

Hello,
We will install the SBO server:
OS: Windows Server 2003 Standard Edition
SBO Clients: 150
How should we setup the 'Client Licesing Mode' for the windows server?
If we select the mode "Per server,Number of concurrent connections", how to set the connection number?
Thanks in advance.
Don

Hi..
you can set License to Particular user using License under Administration and Client will automatically fetch License using License Manager on License Server
Regards,
Bhavank

How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

IDOC type CREMAS01 and address validation for Germany [Error message R5520]

Hi guys
We are using idoc type CREMAS01 to create vendor master via an interface. We have a proble creating vendors via the interface when the vendor's country is Germany.
In table T005, field XREGS (address check with city file) is activated for country DE, and when any value in the address data is not valid, the idoc gets status 51, given invalid address message.
When creating vendors via XK01 or FK01 with the same address, the system gives option to accept the invalid street name (for example), and that was how many vendors were created.
We dont want to deactivate the address check for DE, just beacause of one interface.
Please what can we do so that the interface can bypass the address check, without we deactivating in table T005? My tech team thiinks there are not much enhancements to handle this for the idoc scenario since it uses a BDC.
Regards
Fis.

Guys,
Anyone got any idea to help?

Setup 'addressable client' for reliable messaging

Similar Messages

Maybe you are looking for