SF-200 not displaying all MAC addresses

I have an SF-200-24 port switch, I have a workstation attached that is working and accessible. When I display the Dynamic MAC table, it shows most of the switch ports (including multiple MAC's of the uplink/downlink connections). I have even tried to query interfaces I know have connections (specifically e21 & e23) but get a "no response" message. Has anyone seen this behavior? I am running code 1.0.0.19.

Hi bob, Unless you reset the switch, the start configuration remains same. Please make copy of your running Config before resetting.
And Detailed Instructions regarding Firmware upgrade can be found in the below document:
Firmware Upgrade on SFE/SGE Managed Switches

Similar Messages

Not displaying all ip addresses connected to the network

import java.io.*;
import java.net.*;
import java.util.*;
import static java.lang.System.out;
public class ListNets
public static void main(String args[]) throws SocketException {
Enumeration<NetworkInterface> nets = NetworkInterface.getNetworkInterfaces();
for (NetworkInterface netint : Collections.list(nets))
displayInterfaceInformation(netint);
static void displayInterfaceInformation(NetworkInterface netint) throws SocketException {
Enumeration<InetAddress> inetAddresses = netint.getInetAddresses();
while(inetAddresses.hasMoreElements()==true)
System.out.println(inetAddresses.nextElement());
The output of this code gives only the ip of the computer im working on the network :192.168.1.101 and the local ip 127.0.0.1
although there are other computers connected to the netwrok .. i need to get all the ips connected including the ip of the router so if any 1 can please help me
Bookmark Post in Technorati
Reply With Quote

There is no general way to do what you want to do, which is sometimes called host discovery. Look at the design of port scanners such as nmap (insecure.org) to see how hard it can be. It is even harder in Java because you don't have raw sockets, so you can't send ICMP packets to see who responds. If you read carefully the discussion surrounding the options to nmap to do host discovery using UDP and TCP you may get some ideas that will work for your network.

Ipad contacts not displaying all fields from mac address book, ipad contacts not displaying all fields from mac address book

After syncing mac address book to ipad contacts, the ipad does not display all the fields that were in Mac address book (in my case all the email addresses). Anyone have a fix?

I have a problem similar to DeeRun's.. I would like the IM fields to be synced.. I use them to send e-mails to when the e-mail field is empty or when i just want to use that specific address.. Very annoying, would take hours if not days to transfer all those IM adresses to e-mail fields in addressbook..
EDIT: not to mention the mess it would make in my address book!
Message was edited by: 1NStanley

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
Adapter: Ralink RT3070 Chipset wifi adapter
Tested: os Windows 8.1 Professional
Hot Spot: 802.11b
The first problem windows 7-8.1 got IP adress and connect he public HotSpot but cannot load login page or any other page. It does not work with it.
The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
On windows XP or linux have a MAC adress Change function allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows need debugging and modernize.The quality of Wi-Fi is now the operating system
is now a thing order which is not good then the operating system is unusable.

Hi,
For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited. To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
bit (locally administered) in the second nibble. Thus possible values for the second nibble are limited to 2, 6, A and E.
In other words
MAC address: “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal. The hexadecimal “Y”, written in binary format, is Y: “kmnp”, where “p” is the least significant bit;
p=0 --> unicast;
p=1 --> multicast;
n=0 --> globally assigned MAC;
n=1 --> locally administered;
So, actually MAC can be changed to any combination in which p=0 and n=1;
“Y” can be 2, 6, A or E.
So the possible MAC addresses in Windows 7 for wireless adapters:
X2-XX-XX-XX-XX-XX
X6-XX-XX-XX-XX-XX
XA-XX-XX-XX-XX-XX
XE-XX-XX-XX-XX-XX
For the wifi hotspot issue, please check this blog to see if it can be helpful.
Windows 7 Connectivity Problems in Public Hotspots
http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
Kate Li
TechNet Community Support

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

Finder not displaying all files in remote directory

Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
Why isn't Finder displaying all of my files?

thanks for responding
Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
Any more ideas?

Ciscowork 2000 User tracking problem: not listing all IP address

Hello All!
We are troubleshooting ciscowork user tracking function and we don`t get any ip address outside the subnet where the server is!
Can someone explain how cisco work get the list of all ip addresse SNMP, CDP, scan ...??? From what I have read it seem to be from SNMP. Can I found which OID it use?
User tracking list all mac addresse, all switches but not the ip address. It is not in vlan 1. It stop working since we close vlan 1 and move the server to another vlan.
If your answer is: " cisco work can't see your gateway" Can you be more precis...I have seen that sentence but I don`t what that means...
thanks
ch

First i would check to see if ANI actually discovered teh device. After checking that the IP address filter is correct and your snmp strings are correct then u can try lengthening the snmp retry timeout values: Also check DNS or your local host file for any typos.. failing this try some of these :
Click on Diagnostics > Discovery Metrics > and click on the hyper link number of devices.
This will show u exactky what ANI has discovered and its CDP relationship to other devices. If you do not see your router or L2/L3 device there, then u can try the following:
- check cpd neighbours and correct as required and retry discovery
- select jump router boundries from Setup > ANI admin > Discovery Settings and retry
- if all fails then add the device as part of the seed file.

Blocking all MAC addresses except for the ones you allow

I have a Cisco Aironet 1200 Access Point. I want to block all MAC addresses from accessing the access point, except for the ones I've allowed. First I went to the Address Filters page and clicked on Allowed, then listed all the MAC address I want to be able to access the access point. Then I went to the Ethernet Advanced page, and set the Default Multicast Address Filter to Disallowed, and the Default Unicast Address Filter to Disallowed. Then I went to the AP Radio: Internal Advanced page, clicked on the Advanced Primary SSID Setup link, and set the Default Unicast Address Filter to Disallowed. Accept Authentication Type is set to Open with Shared and Network-EAP cleared, and the Require EAP check boxes are all cleared.
When using a computer whose MAC address is not listed on the Address Filters page, I am still able to connect to the network through the access point. I am also able to connect to the access point from any pc on my network by entering its IP address in Internet Explorer.
What do I need to do to block any pc without a listed MAC address from connecting to the access point?
Thanks, Jeff

Here's the instructions and URL on how to create an MAC based filter:
Follow these steps to create a MAC address filter:
Step 1 Follow the link path to the Address Filters page.
Step 2 Type a destination MAC address in the New MAC Address Filter: Dest
MAC Address field. You can type the address with colons separating the character pairs
(00:40:96:12:34:56, for example) or without any intervening characters (004096123456, for example).
Note If you plan to disallow traffic to all MAC addresses except
those you specify as allowed, put your own MAC address in the list of allowed MAC
addresses. If you plan to disallow multicast traffic, add the broadcast MAC address
(ffffffffffff) to the list of allowed addresses.
Step 3 Click Allowed to pass traffic to the MAC address or click Disallowed
to discard traffic to the MAC address.
Step 4 Click Add. The MAC address appears in the Existing MAC Address
Filters list. To remove the MAC address from the list, select it and click Remove.
Step 5 Click OK. You return automatically to the Setup page.
Step 6 Click Advanced in the AP Radio row of the Network Ports section at
the bottom of the Setup page for the radio you want to configure. The AP Radio Advanced page appears.

TS5148 Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Apple TV powers up but does not display all of a sudden. Tried all of the advice on this page to no avail. Any ideas?

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
However, I suspect you zapped the Mini, maybe the lower voltage part since you siad the fan works.
The power surge could have went into HDMI and damaged the TV.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

DWMX Not Displaying All Files

Hello folks. This is my last attempt to locate a solution for
why my DWMX is not displaying all my files in my local or remote
folder. I have a new client who has put us in charge of moving
their site to a new server. When I create a new site in DWMX, it
allows me to download and upload just fine, ALL of the site.
Problem is, DWMX will only display a certain number of files in
both the local and remote views. In my windows explorer, it shows
all the files, on the new server it shows all the files, but DWMX
will not. The folder in question is the dumping ground for all
their self-managed content images for their site. So it is hard to
split these up into multiple folders and expect the code to work
properly.
Has anyone else experienced this problem? If so, is there a
solution to this problem with DWMX?
Thank you.

Are you using DMX6.0 or DMX6.1? If the former, please update
to the latter
at your earliest opportunity - use the updater on the Adobe
site, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"csnetworks" <[email protected]> wrote in
message
news:fai93r$hj$[email protected]..
> Hello folks. This is my last attempt to locate a
solution for why my DWMX
> is
> not displaying all my files in my local or remote
folder. I have a new
> client
> who has put us in charge of moving their site to a new
server. When I
> create a
> new site in DWMX, it allows me to download and upload
just fine, ALL of
> the
> site. Problem is, DWMX will only display a certain
number of files in
> both the
> local and remote views. In my windows explorer, it shows
all the files,
> on the
> new server it shows all the files, but DWMX will not.
The folder in
> question is
> the dumping ground for all their self-managed content
images for their
> site.
> So it is hard to split these up into multiple folders
and expect the code
> to
> work properly.
>
> Has anyone else experienced this problem? If so, is
there a solution to
> this
> problem with DWMX?
>
> Thank you.
>

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

SF-200 not displaying all MAC addresses

Similar Messages

Maybe you are looking for