SFSY-FORMPAGES and SFSY-JOBPAGES

Hi
I have given SFSY-FORMPAGES and SFSY-JOBPAGES in smartforms but in the output form * is getting printed instead of page numbers and total pages.
thanks
Satish

Hi Satish,
Please refer the below thread(s),
Page Number in Smartform
Best Regards.

Similar Messages

Smartform output error &SFSY-FORMPAGES& &SFSY-JOBPAGES&

Hi, everyone.
I have a issue about smartform printing.
My smartform contains system variables
&SFSY-PAGE&, &SFSY-FORMPAGES&, &SFSY-JOBPAGES&
example as below.
I have a 64 pages form printing.
but I got preview like this
PAGE: 6/ 46/46
6: &SFSY-PAGE&
46:&SFSY-FORMPAGES&
46:&SFSY-JOBPAGES&
AS I print it out, as preview.
Does anybody have the issue like this?
Please help solve. Thank in advance.

Hi,
    If you use &SFSY-PAGE& of &SFSY-FORMPAGES&
the output will be like 1 of 64
                                2 of 64........
&SFSY-PAGE&:-     Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node
&SFSY-FORMPAGES&:- Displays the total number of pages for the currently processed form. This allows you to include texts such as u2018Page x of yu2019 into your output.
&SFSY-JOBPAGES&:-Contains the total page number of all forms in the currently processed print request.
Since in your case job contains only one form so you are getting 46 for both form pages and job pages(job can have any number of forms).
Thank U,
Jay....

Divide SFSY-JOBPAGES by 2 in duplex SMARTFORMS

Hello,
We print 2 SMARTFORMS in the same spool request, each form is in duplex mode.
If we print 4 page, SFSY-JOBPAGES will be 8.
We want to edit 1/4, 2/4, 3/4, 4/4 and not 1/8, 2/8, 3/8, 4/8, is it possible ?
Thank you.
Julien.

Hi,
You should make the calculation in a window of type FINAL. it is only possible with a late-processing window because the samrtforms composer cannot now what the final total number of pages will be whiel it is still processing the form.
regards,
Aidan

Error with SFSY-FORMPAGES and SFSY-PAGE

hi,
i m having a problem in smartforms using SFSY-PAGE and SFSY-FORMPAGES . This two system feilds always returs with one value added. for an example if total # of pages 10 , SFSY-FORMPAGES returns 11 ,for the first page SFSY-PAGE returns 2.
Looking for a quick response...
[email protected]
Thanks ...
Dilum-Sri lanka

Hi Dilum,
Use these two variables in a text in a smart form:
&SFSY-FORMPAGES &
&SFSY-PAGE&
You will see that in the print preview itself ; the values which are getting displayed for the two variables are absolutely correct.
So there is no problem as such while using these two variables.
And no error is there even if you just have one page. In your case the value for the two variables is 1 each whihc is getting displayed in the print preview .
Regards,
Kunal.
Message was edited by: Kunal Kumar

PAGE SAPSCRIPT

Hi,
The meter of pages is wrong. For example:
I have 13 pages, but the report shows 1/1 - 2/1 - 3/1.
The right would be 1/13 - 2/13 - 3/13.
How can I fix this problem?
Regards
L.F

hi,
There might be two reasons for coming like this.
1. the text window does not have enough space to display the 13 so it is displaying it as 1. Extend the text window such that it will display the complete values
2. You might have used the wrong variable to dispaly it. Use the variable &SAPSCRIPT-FORMPAGES& and &SAPSCRIPT-JOBPAGES&.
Regards,
Veeresh

Error in Page SFSY-PAGE of SFSY-FORMPAGES

Hi;
When i enumerate the smartform pages with this in a textbox Page &SFSY-PAGE& of &SFSY-FORMPAGES&, and the number of pages is more than 10 it displays:
Page 1 of *, Page 2 of *.....Page 1 of 10.. Page 1 of 11.....
the first 9 pages the SFSY-FORMPAGES displays '*' but if the number of pages is less than 10 it doit well:
Page 1 of 8... Page 2 of 8 ....
What could be the problem...?
Thanks on advance.
David Fúnez
Tegucigalpa, Honduras
Corp. Mandofer

Hi David,
Look at OSS Note 588352. Use format like &SFSY-FORMPAGES(3Z)&.
The length of the field will be longer and zero suppress.
I hope you will get it
Thanks
Seshu

Why the statement: "IF SFSY-PAGE EQ SFSY-FORMPAGES" do not work?

Hi gurus,
I want to check if the current page is the last page and use this statement in Code Node:
IF SFSY-PAGE EQ SFSY-FORMPAGES.
V_G_SHOW = 'X'.
ELSE.
But when I try to debug this part of code, I find SFSY-PAGE and SFSY-FORMPAGES always have same value.
Why?
thanks

Smartforms evaluate &SFSY-FORMPAGES& during the execution of the form.
If you want to know the final number of pages, you have to execute the Windows at the end of the form. Look at OSS [Note 588352 - '*' when you output the total number of pages |https://service.sap.com/sap/support/notes/588352] so the window will be "late" executed and the data of &SFSY-FORMPAGES& and &SFSY-PAGE& may be different. (the note relates to "final" window)
Regards

Smart form and Jet form

Hi,
Please let me know the difference betweeen Smart form and jet form and in which scenarios we use them.
thanks

HI,

Smart forms
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/formPrinting-SAPscript,Smartforms&
Smartforms: Frequently Asked Questions
What are the differences between SAP Scripts and Smartforms?
How can I insert symbols in Smartforms?
I have a smartform which works fine in DEV. After trasnsporting it to PROD, there is no Function module generated for this smartform. As a result my program dumps in PROD?
How can I make the Smartforms to choose a printer name by default?
How can I make the Smartforms to display a print preview by default without displaying the popup for print parameters?
How can I display the total number of pages in Smartforms?
How can I display the total number of pages in Smartforms?
I'm using the variable SFSY-FORMPAGES, I get a star "*" instead of the total number of pages.
What are the various text formatting options in Smartforms?
How can I provide a background shading to the table?
Where can I provide the input parameters to the smartform?
Where can I define my own global types for the smartform?
I have defined my own Program Lines, where I have used a global variable G_TEXT. I get an error G_TEXT is not defined?
I have created a table node for display. Where can I check the condition which must satisfy to display the table?
How can I define Page Protect in Smartforms?
What is the difference between Template and Table in Smartforms?
Where can I define the paragraph and character format for the smartforms?
What are the differences between SAP Scripts and Smartforms?
SAP Scripts are client dependent whereas Smartforms are client independent.
SAP Scripts require a driver program to display the output whereas in smartforms the form routines can be written so that it is standalone.
An integrated Form Builder helps to design Smartforms more easily than SAP Scripts
An Table Painter and Smartstyles to assist in building up the smartforms
On activation a function module is generated for Smartforms
It is possible to create a Smartform without a main window
Smartforms generates XML output which can be viewed through the web
Multiple page formats is possible in smartforms
How can I insert symbols in Smartforms?
Select the Text node.
Change Editor (Click the button above Check near the Editor)
Go to menu Include->Characters->SAP Symbols
Choose the SAP symbol that you want to insert.
I have a smartform which works fine in DEV. After trasnsporting it to PROD, there is no Function module generated for this smartform. As a result my program dumps in PROD?
The Smartform that is created in the Development may not have the same name in the Production server. So it is always advised to use the Function Module SSF_FUNCTION_MODULE_NAME to get the Function Module name by passing the Smartform name.
DATA: fm_name TYPE rs38l_fnam.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
 formname = 'ZSMARTFORM'
IMPORTING
 fm_name = fm_name
EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION fm_name
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.How can I make the Smartforms to choose a printer name by default?
In the CALL FUNCTION of the Smartform Function Module, set the output options parameter to set the printer name.
The output options is of the type SSFCOMPOP which contains the field TDDEST. Set the TDDEST field to your default printer name.
How can I make the Smartforms to display a print preview by default without displaying the popup for print parameters?
In the SSF_OPEN function module,
Set the OUTPUT OPTIONS paramter TDDEST to your printer name.
Set the CONTROL PARAMETERS and control parameters as shown below,
control-preview = 'X'.
control-no_open = 'X'.
control-no_close = 'X'.
control-no_dialog = 'X'.
control-device = 'PRINTER'.
control_parameters-no_dialog = 'X'.
control_parameters-no_open = 'X'.
control_parameters-no_close = 'X'.
OUTPUT_OPTIONS-TDDEST = 'PRINTER NAME'.
OUTPUT_OPTIONS-TDNOPRINT = 'X'.
CALL FUNCTION 'SSF_OPEN'
EXPORTING
 output_options = output_options
 control_parameters = control
 user_settings = ' '
EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.How can I display the total number of pages in Smartforms?
Use SFSY-FORMPAGES to display the total number of pages in the Smartforms
&SFSY-PAGE& Current page number
&SFSY-FORMPAGE& Total number of pages in the currently formatted layout set
&SFSY-JOBPAGE& Total number of pages in the currently formatted print request
&SFSY-COPYCOUNT& Original-1,1st copy-2
&SFSY-DATE& Date
&SFSY-TIME& Time
&SFSY-USERNAME& Username
I'm using the variable SFSY-FORMPAGES, I get a star "*" instead of the total number of pages.
There may not be enough space in the window to display the variable, either increase the window dimensions or condense the spaces using &SFSY-FORMPAGES(C)&
What are the various text formatting options in Smartforms?
&symbol(Z)& Omit Leading Zeros
&symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
How can I provide a background shading to the table?
In the Table Painter, you can specify the color and shading for the table lines.
Where can I provide the input parameters to the smartform?
The input parameters for the smartform can be defined in Global Settings->Form Interface.
The Associated Type must be defined in the ABAP Dictionary.
Where can I define my own global types for the smartform?
The global types(within the smartform) can be defined in Global Settings->Global Definitions->Types
The types defined here will be global through the entire smartform.
Also the form routines can be defined Global Settings->Global Definitions->Form Routines
I have defined my own Program Lines, where I have used a global variable G_TEXT. I get an error G_TEXT is not defined?
Whenever using the global variables in the Program Lines, enter the variable name in Input Parameters if you are going to use(read) the variable. If you are going to both read/write the variable value enter the same in Output Parameters.
I have created a table node for display. Where can I check the condition which must satisfy to display the table?
The conditions can be defined in the Conditions tab. In smartforms all the nodes have a condition tab where you can specify the condition to be satisfied to access the node.
How can I define Page Protect in Smartforms?
To define Page Protect for a node go to the Output options and check the Page Protection checkbox.
What is the difference between Template and Table in Smartforms?
The Template contains a fixed number of rows and columns, where the output is fixed.
The Table can have variable number of rows
Where can I define the paragraph and character format for the smartforms?
The paragraph and character format for the smartforms can be defined in the transaction SMARTSTYLES
Mohan
Award points if it adds information.

Module Pool and Smart Form

Can anybody Provide me good step by step procedure for module pool and smart for programming with screenshot.
my email Id is [email protected]

Hi,
A module pool is a collection of screens, flow logic, menu bars and ABAP code that you use to build an application. Typically the transaction code that calls the application will refer to the module pool and the initial screen number.
-->What are the requirements a dialog program must fulfill ?
A dialog program must fulfill the following requirements
. a user friendly user interface
. format and consistency checks for the data entered by the user
. easy correction of input errors
. access to data by storing it in the database.
What are the basic components of dialog program ?
Screens (Dynpros)
Each dialog in an SAP system is controlled by dynpros. A Dynpro consists of a screen and its flow logic and controls exactly one dialog step.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules.
What is a dynpro ? What are its components ?
A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly
one dialog step.
- The different components of the dynpro are:
Flow logic: Calls of the ABAP/4 modules for a screen
Screen layout: Positions of the texts, fields, pushbuttons, and so on for a screen
Screen attributes: Number of the screen, number of the subsequent screen, and others
Field attributes: Definition of the attributes of the individual fields on a screen
What is screen flow logic? What are the selections in it? Explain PAI and PBO?
Ans - Screen flow logic contains the procedural part of a screen. The screen flow logic is like an ABAP program in that it serves as a container for processing blocks. There are four event blocks, each of which is introduced with the screen keyword PROCESS:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
PROCESS ON HELP-REQUEST.
PROCESS ON VALUE-REQUEST.
Selections are performed in PAI.
PROCESS BEFORE OUTPUT (PBO) is automatically triggered after the PAI processing of the previous screen and before the current screen is displayed. You can program the PBO processing of the screen in this block. At the end of the PBO processing, the screen is displayed.
PROCESS AFTER INPUT (PAI) is triggered when the user chooses a function on the screen. You can program the PAI processing of the screen in this block. At the end of the PAI.
processing, the system either calls the next screen or carries on processing at the point from which the screen was called.
PROCESS ON HELP-REQUEST (POH) and PROCESS ON VALUE-REQUEST (POV) are triggered when the user requests field help (F1) or possible values help (F4) respectively. You can program the appropriate coding in the corresponding event blocks. At the end of processing, the system carries on processing the current screen.
step by step process of dialog programing:
Firstly, you can go to Tcode SE80 and here create a package.
On that package name right click and select program.
Then choose program type modulepool program.
Similarly, you can create screen and then select layout and drag and drop labels and pushbuttons as per your requirements.. Then double click on th push buttons.You will see property window and there we will find FCTCODE and there type the names e.g suppose you want to
display then typy on the fctcode Display or any name as you wish.
After that save and activate it. and then close the window.
And then go back to the intial screen .
And then click Flow logic button and then uncomment the statement
module status_1000 PBO block and then doible click on status_1000
save and activate and then go back and then PAI block uncomment the statement module status_1000 and the dobule click on status_1000.
step by step process of creating smartforms:
1.        What is Smartforms?
Smartforms is a tool to create and maintain forms for mass printing in SAP Systems. Just like sapscripts, for Smart
forms print program is used to create the output internal table which in turn is thrown to the smart form where the
field values are displayed. The output medium for Smartforms support printer, fax, e-mail, or the Internet.
Transaction Code: SMARTFORMS
To print a form the program for the data retrieval and a Smartform that contains the entire form logic is required. As
these two are separate one should adapt the Smartform if changes to the form logic are necessary. The application
program passes the data via a function module interface to the Smartform. When activating the Smartform the system
automatically generates the function module.
The architecture of the smart form is given below:
Creating Forms Using SAP Smart Forms
When creating a form one must:
1.      Retrieve the application data
2.      Describe the form
3.      Pass the application data to the form
Example: Create Smartform for printing Purchase order.
Retrieving the application data (Purchase Order information):
Write an ABAP program (Print Program) to retrieve data or include a retrieval routine into the application. This
code consists of statements that select data from databases according to certain selection criteria. Store the
retrieved data in internal tables, structures or variables and transfer it to the form in one step.
SAP has already provided with the Print Program (/SMB40/FM06P) for Purchase Order. Based on the business
requirement, this Print Program can be copied and modified to get the required data and transfer to Smartform.
Describing the Form:
The user defines the form using a Smartform. Use the tools of the form builder as listed below:
1.        Use the form painter to position the windows, graphics and addresses on a page.
2.        Use the PC editor to write the texts.
3.        Use the table painter to format the tables.
The flow control is used to print the pages and elements.
Form Logic (Introduction)
In the form builder one can describe a Smartform by a set of nodes. To do this, one can build up a tree structure on
the left side of the user interface.
The node global settings and its three successors form attributes, form interface and global definitions always exists
for any newly created forms.
To describe the form logic, create the hierarchy under the node pages and windows.
The following rules apply to control the flow of the form output.
1.        The nodes in the tree structure are processed from top to bottom.
2.        For each node there is a tab, this can be used to link the node to a condition. If the condition is true, the
system processes the node. If not, it skips the node and all its successors.
3.        One should define a next page for each page.
The SAP form builder of the smart form consists of:
1.        Form painter for creating the layout of the form
2.        PC Editor for entering texts and fields into output areas
3.        Navigation tree for maintaining the form logic
4.        Table painter for creating templates and tables
To define the text formats, one can use the Smart Styles.
Style builder:
On the left of the style builder screen consists of the predetermined nodes (header data, folder for paragraph
formats, and folder for character formats).
On the right one can see the maintenance screen with its tab pages. At the bottom the preview of the selected font
can be viewed.
Create Purchase Order Smartform
Create a Smartform, copy the existing SAP provided purchase order Smartform to ZSFM_PURCHASEORDER for
customizing as per business requirement.
1. Form Settings under Global Settings node, set the parameters in Output Option:
Page Format: Letter
Character per Inch: 20
Line per Inch: 6
Style: ZSTM_SMB40_SF
Output Format: Standard Output
2.        Form Interface
We can add parameters in the Import Parameters and tables in Tables tab of the form interface for the application
data to be available for the Smartform to print.
3. In Global definition we can define the all the global variables which can be used in Smartforms. Initialization
can be used for initializing the variables and even for retrieving the data.
Creating pages:
Each form consists of one or more pages. The first page in the tree structure is the start page and the
processing of the form starts with this page itself.
1.        Open the context menu for existing page node and choose create®page
2.        Enter a unique name (FIRST) for the node and a description (Page)
3.        Determine the format (1, 2, 3...)and the mode of the page counter (Increase counter) on the general
attributes tab
4.        Determine the print attributes (Portrait Format) of the page on the output options
5.        Determine a background graphic for the entire page on the background tab (Not used in PO).
Creating windows:
The size and position of the window can be graphically set in the form painter. There are main windows and
secondary windows. The difference between these two is that the output in a main window can cover several
pages.
1.        Open the context menu for an existing page node and choose®window
2.        Enter a name for the node (NAMEFORM) and a description (Title Window).
3.        On the general attributes indicate type of window. NAMEFORM is secondary window.
In similar fashion all the other windows are created and positioned as per the form design. Only one MAIN
window is created, it is used for line items which can cover several pages.
Positioning texts on the form
The texts are displayed in the form using text nodes. The only exceptions are addresses.
The predecessor node of the text node determines its use:
Predecessor node        Used to
Secondary window        Position text on one or more pages
Main window        Display text in relation to other nodes in the main window, it may cover several pages
Template         Displays texts for table cells of a static table
Table        Display table contents
There are three text types:
1.        Text element : to enter new text in the PC editor
2.        Text module : to include a text module
3.        Include text : to include an existing SAPscript text
Entering texts in PC editor: (TITLE)
·        To create a text node call the context menu for that node in the tree structure that should receive the
text, then choose->text
·        Enter a unique name (TITLE) for the node and the node description (TITLE)
·        On the general attributes tab choose text element as text type
·        In the text node box choose whether the text should be started with a new paragraph or only in a new
line
·        Enter the text in the PC editor. Text could be a program element like &Title& or Purchase Order. &Title&
is a variable for which the value is assigned in Program line before the text.
Including text modules: (TERMSCONDITION)
Text module of the text node is used to refer to an existing text module in the system. The text modules can be
used in two ways:
·        To create a text node, call the context menu for that node in the tree structure that shall contain the text
and choose create->text under the window TERMSCONDITION.
·        Enter a unique name for the node (TERMSCONDITION) and a description (Terms and Condition)
·        On the general attributes tab select the text type text module
·        Enter the name of the text module in the text name field (&G_TERMS_TEXT&). &G_TERMS_TEXT& is
used to determine the Text name dynamically in the program lines preceding the text module node.
·        Program Lines: GETTERMSCONDITION
Concatenate 'ZTMM_PO_TERMS_' ZXEKKO-BUKRS
                                  INTO G_TERMS_TEXT.
Including SAPscript texts: (HD_TXT_F01 Order Header Text)
The text type include text node to refer to a SAPscript text, which already exists in the system. To identify the
text the text name, object, id and the language is needed.
·        To create the text node, call the context menu for that node in the tree structure that shall receive the
text and choose create -> text under the main window.
·        Enter a unique name (HD_TXT_F01) for the node and the node description (Order Header Text).
·        On the general attributes tab choose include text as text type
·        Text Name - &ZEKKO-EBELN&, Text Object EKKO, Text ID F01, Language - &SY-LANGU&. Also check
mark No error if no text exists.
Tip: Since the size of text is not known, its better to have the text in MAIN window, so that it can run to more
than one page if required.
Inserting addresses: (SENDER):
Address node is used to insert an address into the form. This guarantees that the address is formatted
according to the postal rules of the sender country.
·        To create an address node , call the context menu for that node in the tree structure that one wants to
contain the text and choose create->Address
·        Enter a name for the node (COMPANY_CODE_ADDRESS) and a description (Company Code Address)
·        Determine the address type (Organization Address) on the general attributes tab
·        For organizational addresses - specify the address number, for any other - specify the person number
and the address number. In this case we get the company code address into variable &ADDNR&, so we need
program lines (SENDER) preceding the address text.
·        In the box additional addresses, attributes to specify how to display the address are maintained.
Printing graphics: (LOGO):
Tcode SE78 is used to import graphics into the SAP system. The transaction imports the graphics and stores it
in the BDS (business transaction server) and then it can be displayed in the form.
·        To create the graphic node , call the context menu for that node in the tree structure and choose create-
>graphic
·        Enter a name (LOGO) for the node and the description (Logo Graphic)
·        On the general attributes determine whether a colored or a black and white
·        On General Attributes use the fields object - GRPAHIC, id BMAP and name - &G_LOGO& to identify the
graphic. &G_LOGO& is variable and therefore we can print company code specific logo. Program line preceding
the graphic is required.
·        Program line COMP_LOGO is used to assign the value to G_LOGO. Concatenate 'ZCOMPANY_LOGO_'
ZXEKKO-BUKRS INTO G_LOGO. So, the name of graphic for example will be ZCOMPANY_LOGO_0202 for
company code 0202.
Displaying a static table (Window INFO, Template - TEM_INFO)
Use node type template to display a table whose layout and size is determined before the runtime of the print
program.
To create a template, define a table layout to determine the cell structure for each line. The cells are used to
display the cell structure for each line. The cells are used to display the contents of the successor nodes of the
template node.
·        Create Template under the INFO window node. Create > Template.
The template layout is used to determine the following,
1.        The number of lines and cells
2.        The height of each cell
3.        The width of each cell
4.        The alignment of the table in the window
5.        Whether and where to display separator lines or frames
Use the table control on the template tab to define the layout of the lines. Each line of the template must have
a definition.
Use the pattern box to select the desired table pattern.
Displaying contents in cells: (TLE_CONTACT)
The template node defines the table layout. The successor nodes of the template         determine the data to be
displayed in the table cells.
In General Attributes choose Text type Text Element. In editor, type DTE         Contact.
In Output Options, define the output structure LINE 5 and Column 1.
Similarly all other information for each cell can be filed using the text module and         address module.
Displaying Dynamic Table (ITEM_TABLE)
·        Create TABLE under the MAIN window node. In DATA Tab, loop through the data internal table.
L_XEKPO is the item table which has all the line item details.
Define the line types based on the positioning of the text in main window. For         example: TABLE_HEADER1
is used for positioning Header texts in the table.
·        Table is divided into three parts: Header, Main Area and Footer.
·        Header is used for printing the Header Title of the table and it at the start of the table on every page.
·         Main Area is used to print the line item details of the PO. Create a line (ITEM_DETAIL) of the line type
TABLE_HEADER1. It will dynamically generate number cells based on the line type defined in the table layout.
Name all the cells as per the usage. For each cell create the text node to display the information. For example:
Cell VAL_MATERIAL, Text node MATNR is created which has text element - -matnr.
·        Footer is used for printing the information after Main Area data is printed. This can be used for Total
printing or any other information which needs to be printed after all line items are printed. Create line
TLE_CONTR_STP for Contractual Stipulation of the line type LINE which has only one column. Create the
text element to print the information.
Special Requirement: Printing the Acknowledgement text if the order value is greater then USD 50,000.00 on
the second copy only.
·        This requirement needs the modification in the print program and the Smartform.
·        Modification in Print Program to trigger the second copy if the order value is greater then 50K. Its
advisable to copy the standard print program to custom Z program (Z_SMB40_FM06P), and changes should
be made to Z program. Number of copies is passed from NAST to ls_composer_param-tdcopies in Smartforms.
The value ls_composer_param-tdcopies is modified in the print program to 2 if the order value is greater then
50K.
·        The printing of Acknowledgement Text only on second copy is achieved using the COPIES WINDOW in
Smartforms. Define Window ACKN_COPY of the type COPIES WINDOW and Output to Only Copies Copies
Differ. Also set the condition in the Condition Tab of the window SFSY-JOBPAGES = 1, so that it only print
on the first page of the copy.
·        If user selects to print 2 copies and the order value is more then 50k, program needs to print 2 sets
meaning 4 copies. So number of copies is taken care of in Print program but again the printing of
Acknowledgement Text should be only the Even number copy meaning Copy# 2 and 4. This achieved by using
the program lines to determine the even copy. SFSY-COPYCOUNT will tell us the current copy number being
printed.
regards,
vineela.
Edited by: Radha Vineela Aepuru on Mar 13, 2008 11:12 AM

Function module of smart form delivered an error

Hi All,
I am getting an error like this
"Function module /1BCDWB/SF00000007 of smart form delivered an error"
FUNCTION /1BCDWB/SF00000007.
""Global interface:
*" IMPORTING
*" VALUE(ARCHIVE_INDEX) TYPE TOA_DARA OPTIONAL
*" VALUE(ARCHIVE_PARAMETERS) TYPE ARC_PARAMS OPTIONAL
*" VALUE(CONTROL_PARAMETERS) TYPE SSFCTRLOP OPTIONAL
*" VALUE(MAIL_APPL_OBJ) TYPE SWOTOBJID OPTIONAL
*" VALUE(MAIL_RECIPIENT) TYPE SWOTOBJID OPTIONAL
*" VALUE(MAIL_SENDER) TYPE SWOTOBJID OPTIONAL
*" VALUE(OUTPUT_OPTIONS) TYPE SSFCOMPOP OPTIONAL
*" VALUE(USER_SETTINGS) TYPE TDBOOL DEFAULT 'X'
*" VALUE(ARCHIVE_INDEX_TAB) TYPE TSFDARA OPTIONAL
*" REFERENCE(ORDERADM_H) TYPE CRMT_OUTPUT_ORDERADM_H_COM
*" REFERENCE(ACTIVITY_H) TYPE CRMT_OUTPUT_ACTIVITY_H_COM
*" REFERENCE(OPPORT_H) TYPE CRMT_OUTPUT_OPPORT_H_COM
*" REFERENCE(ORGMAN_H) TYPE CRMT_OUTPUT_ORGMAN_H_COM
*" REFERENCE(PARTNER_H) TYPE CRMT_OUTPUT_PARTNER_H_COMT
*" REFERENCE(PRICINGDATA_H) TYPE
*" CRMT_OUTPUT_PRICINGDATA_H_COM
*" REFERENCE(SALES_H) TYPE CRMT_OUTPUT_SALES_H_COM
*" REFERENCE(SHIPPING_H) TYPE CRMT_OUTPUT_SHIPPING_H_COM
*" REFERENCE(PAYPLAN_D_H) TYPE
*" CRMT_OUTPUT_PAYPLAN_D_H_COMT
*" REFERENCE(CUMULAT_H) TYPE CRMT_OUTPUT_CUMULAT_H_COM
*" REFERENCE(CUSTOMER_H) TYPE CRMT_OUTPUT_CUSTOMER_H_COM
*" REFERENCE(ACS_H) TYPE CRMT_ACS_H_COM
*" REFERENCE(BILLING_H) TYPE CRMT_OUTPUT_BILLING_H_COMT
*" REFERENCE(CANCEL_H) TYPE CRMT_OUTPUT_CANCEL_H_COMT
*" REFERENCE(APPOINTMENT_H) TYPE
*" CRMT_OUTPUT_APPOINTMENT_H_COMT
*" REFERENCE(BILLPLAN_D_H) TYPE
*" CRMT_OUTPUT_BILLPLAN_D_H_COMT
*" REFERENCE(BILLPLAN_H) TYPE CRMT_OUTPUT_BILLPLAN_H_COMT
*" REFERENCE(STATUS_D_H) TYPE CRMT_OUTPUT_STATUS_D_H_COMT
*" REFERENCE(STATUS_H) TYPE CRMT_OUTPUT_STATUS_H_COMT
*" REFERENCE(SRV_SUBJECT_H) TYPE
*" CRMT_OUTPUT_SRV_SUBJECT_H_COMT
*" REFERENCE(SRV_SUBJECT_I) TYPE
*" CRMT_OUTPUT_SRV_SUBJECT_H_COMT
*" REFERENCE(SRV_REASON_H) TYPE
*" CRMT_OUTPUT_SRV_REASON_H_COMT
*" REFERENCE(SRV_RESULT_H) TYPE
*" CRMT_OUTPUT_SRV_RESULT_H_COMT
*" REFERENCE(SRV_REFOBJ_H) TYPE
*" CRMT_OUTPUT_SRV_REFOBJ_H_COMT
*" REFERENCE(SRV_REFOBJ_I) TYPE
*" CRMT_OUTPUT_SRV_REFOBJ_H_COMT
*" REFERENCE(ORDERADM_I) TYPE CRMT_OUTPUT_ORDERADM_I_COMT
*" REFERENCE(ORDERADM_I_IN) TYPE
*" CRMT_OUTPUT_ORDERADM_I_IN_COMT
*" REFERENCE(ORDERADM_I_QT) TYPE
*" CRMT_OUTPUT_ORDERADM_I_QT_COMT
*" REFERENCE(ORGMAN_I) TYPE CRMT_OUTPUT_ORGMAN_I_COMT
*" REFERENCE(PRICINGDATA_I) TYPE
*" CRMT_OUTPUT_PRICINGDATA_I_COMT
*" REFERENCE(PRICING_I) TYPE CRMT_OUTPUT_PRICING_I_COMT
*" REFERENCE(PRODUCT_I) TYPE CRMT_OUTPUT_PRODUCT_I_COMT
*" REFERENCE(SALES_I) TYPE CRMT_OUTPUT_SALES_I_COMT
*" REFERENCE(SERVICE_I) TYPE CRMT_OUTPUT_SERVICE_I_COMT
*" REFERENCE(SCHEDLIN_I) TYPE CRMT_OUTPUT_SCHEDLIN_I_COMT
*" REFERENCE(SCHEDLIN_I_CF) TYPE
*" CRMT_OUTPUT_SCHEDLIN_I_CF_COMT
*" REFERENCE(SHIPPING_I) TYPE CRMT_OUTPUT_SHIPPING_I_COMT
*" REFERENCE(PARTNER_I) TYPE CRMT_OUTPUT_PARTNER_I_COMT
*" REFERENCE(ITEM_CSTICS_I) TYPE CRMT_ITEM_CSTICS_TAB
*" REFERENCE(CUSTOMER_I) TYPE CRMT_OUTPUT_CUSTOMER_I_COMT
*" REFERENCE(BILLING_I) TYPE CRMT_OUTPUT_BILLING_I_COMT
*" REFERENCE(CANCEL_I) TYPE CRMT_OUTPUT_CANCEL_I_COMT
*" REFERENCE(FINPROD_I) TYPE CRMT_OUTPUT_FINPROD_I_COMT
*" REFERENCE(ORDPRP_I) TYPE CRMT_OUTPUT_ORDPRP_I_COMT
*" REFERENCE(APPOINTMENT_I) TYPE
*" CRMT_OUTPUT_APPOINTMENT_I_COMT
*" REFERENCE(BILLPLAN_D_I) TYPE
*" CRMT_OUTPUT_BILLPLAN_D_I_COMT
*" REFERENCE(BILLPLAN_I) TYPE CRMT_OUTPUT_BILLPLAN_I_COMT
*" REFERENCE(STATUS_I) TYPE CRMT_OUTPUT_STATUS_I_COMT
*" REFERENCE(WORKING_SET_E_S_BBP) TYPE
*" /1CN/WORKING_SET_E_S_BBP_T
*" REFERENCE(LANGUAGE) TYPE SY-LANGU
*" REFERENCE(SERVICE_I_ASSI) TYPE
*" CRMT_OUTPUT_SERVICE_I_***_COMT
*" VALUE(FORM_TYPE) TYPE C OPTIONAL
*" REFERENCE(Y_V_PARTNER_FLAG) TYPE C OPTIONAL
*" EXPORTING
*" VALUE(DOCUMENT_OUTPUT_INFO) TYPE SSFCRESPD
*" VALUE(JOB_OUTPUT_INFO) TYPE SSFCRESCL
*" VALUE(JOB_OUTPUT_OPTIONS) TYPE SSFCRESOP
*" EXCEPTIONS
*" FORMATTING_ERROR
*" INTERNAL_ERROR
*" SEND_ERROR
*" USER_CANCELED
DATA: %INPUT TYPE SSFCOMPIN,
 %RESULT_OP TYPE SSFCRESOP,
 %RESULT_PD TYPE SSFCRESPD,
 %RESULT_CL TYPE SSFCRESCL,
 %TABDEF LIKE LINE OF %TABDEFS,
 %ARCTAB TYPE TSFDARA,
 BEGIN OF %FULLNAME,
 FORM TYPE TDSFNAME VALUE 'YCRM_ORDER_SERVICE_RMA',
 VARI TYPE TDVARIANT,
 ACTV TYPE TDBOOL VALUE 'X',
 END OF %FULLNAME.
TYPES: T_XDF_ELEM(255) TYPE C,
 T_XDF_ATTR(255) TYPE C.
DATA: IMPORT_PARAMETER TYPE TABLE OF RSIMP WITH HEADER LINE,
 CHANGING_PARAMETER TYPE TABLE OF RSCHA WITH HEADER LINE,
 TABLES_PARAMETER TYPE TABLE OF RSTBL WITH HEADER LINE,
 EXPORT_PARAMETER TYPE TABLE OF RSEXP WITH HEADER LINE,
 EXCEPTION_LIST TYPE TABLE OF RSEXC WITH HEADER LINE.
DATA: XDF_TABLE TYPE TSFIXML,
 XDF_LENGTH TYPE I.
DATA: XDF_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
 XDF_PARAMETER TYPE REF TO IF_IXML_ELEMENT,
 L_NAME TYPE STRING,
 L_VALUE TYPE STRING,
 L_OBJECT TYPE STRING,
 L_DATE TYPE STRING,
 L_TIME TYPE STRING,
 RC TYPE SY-SUBRC.
FIELD-SYMBOLS: <DATA_OBJECT> TYPE ANY.
CLASS CL_IXML DEFINITION LOAD.
CONSTANTS: C_XDF_ROOT_ELEMENT TYPE T_XDF_ELEM VALUE 'XDF',
 C_XDF_ATTR_TYPE TYPE T_XDF_ATTR VALUE 'TYPE',
 C_XDF_ATTR_TIMESTAMP TYPE T_XDF_ATTR VALUE 'TIMESTAMP',
 C_XDF_ATTR_OBJ TYPE T_XDF_ATTR VALUE 'OBJECT'.
DATA: XDF_FACTORY TYPE REF TO IF_IXML,
 XDF_ROOT_ELEMENT TYPE REF TO IF_IXML_ELEMENT.
DATA: L_GETSTATE TYPE DDTYPEGET,
 L_TYPE TYPE DDTYPEKIND,
 L_TYPE_NAME TYPE TYPENAME,
 L_DDIC_OBJ TYPE DDTYPES OCCURS 0 WITH HEADER LINE,
 L_DD02L_STATE TYPE DD02L OCCURS 0 WITH HEADER LINE,
 L_DD04L_STATE TYPE DD04L OCCURS 0 WITH HEADER LINE,
 L_DD40L_STATE TYPE DD40L OCCURS 0 WITH HEADER LINE,
 L_XMLOUTPUT TYPE SSFXMLOUT,
 L_SFSY TYPE SFSY.
TYPE-POOLS: ABAP.
DATA: XDF2_IXML TYPE REF TO IF_IXML,
 XDF2_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
 XDF2_SRC_OBJECTS TYPE ABAP_TRANS_SRCBIND_TAB,
 XDF2_SRC_OBJECT LIKE LINE OF XDF2_SRC_OBJECTS.
DEFINE XDF2_APPEND_SRC_OBJECT.
XDF2_SRC_OBJECT-NAME = '&1'.
TRANSLATE XDF2_SRC_OBJECT-NAME TO UPPER CASE.
GET REFERENCE OF &2 INTO XDF2_SRC_OBJECT-VALUE.
APPEND XDF2_SRC_OBJECT TO XDF2_SRC_OBJECTS.
END-OF-DEFINITION.
DEFINE XDF_GET_DDIC_INFO.
CLEAR L_DDIC_OBJ.
IF NOT &2 IS INITIAL.
 L_TYPE_NAME = &2.
ELSEIF NOT &1-TYP IS INITIAL.
 L_TYPE_NAME = &1-TYP.
ELSEIF NOT &1-LINE_OF IS INITIAL.
 L_TYPE_NAME = &1-LINE_OF.
ELSEIF NOT &1-TABLE_OF IS INITIAL.
 L_TYPE_NAME = &1-TABLE_OF.
ELSE.
 CLEAR L_TYPE_NAME.
ENDIF.
CALL FUNCTION 'DDIF_TYPEINFO_GET'
 EXPORTING TYPENAME = L_TYPE_NAME
 IMPORTING TYPEKIND = L_TYPE.
L_DDIC_OBJ-TYPENAME = L_TYPE_NAME.
L_DDIC_OBJ-TYPEKIND = L_TYPE.
IF NOT L_DDIC_OBJ IS INITIAL.
 COLLECT L_DDIC_OBJ.
ENDIF.
END-OF-DEFINITION.
DEFINE XDF_CREATE_DATA_STREAM.
CLEAR: L_OBJECT, L_DATE, L_TIME, L_NAME, L_TYPE_NAME, L_VALUE.
IF &3 = 'T'.
 CONCATENATE &1-PARAMETER '[]' INTO L_NAME.
ELSE.
 L_NAME = &1-PARAMETER.
ENDIF.
IF NOT &2 IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>
 CASTING TYPE (&2).
 L_TYPE_NAME = &2.
ELSEIF NOT &1-TYP IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>
 CASTING TYPE (&1-TYP).
 L_TYPE_NAME = &1-TYP.
ELSEIF NOT &1-LINE_OF IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 L_TYPE_NAME = &1-LINE_OF.
ELSEIF NOT &1-TABLE_OF IS INITIAL.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 L_TYPE_NAME = &1-TABLE_OF.
ELSE.
 ASSIGN (L_NAME) TO <DATA_OBJECT>.
 CLEAR L_TYPE_NAME.
ENDIF.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = L_NAME
 DATAOBJECT = <DATA_OBJECT>
 IMPORTING
 DATA_AS_DOM = XDF_PARAMETER
 CHANGING
 DOCUMENT = XDF_DOCUMENT
 EXCEPTIONS
 OTHERS = 1.
L_NAME = C_XDF_ATTR_TYPE.
L_VALUE = L_TYPE_NAME.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_VALUE
 RECEIVING RVAL = RC.
CLEAR L_DDIC_OBJ.
READ TABLE L_DDIC_OBJ WITH KEY TYPENAME = L_TYPE_NAME.
CASE L_DDIC_OBJ-TYPEKIND.
 WHEN 'S'.
 READ TABLE L_DD02L_STATE WITH KEY TABNAME = &1-TYP.
 L_DATE = L_DD02L_STATE-AS4DATE.
 L_TIME = L_DD02L_STATE-AS4TIME.
 L_OBJECT = 'TABL'.
 WHEN 'E'. " data elements
 READ TABLE L_DD04L_STATE WITH KEY ROLLNAME = &1-TYP.
 L_DATE = L_DD04L_STATE-AS4DATE.
 L_TIME = L_DD04L_STATE-AS4TIME.
 L_OBJECT = 'DTEL'.
 WHEN 'L'. " table types
 READ TABLE L_DD40L_STATE WITH KEY TYPENAME = &1-TYP.
 L_DATE = L_DD40L_STATE-AS4DATE.
 L_TIME = L_DD40L_STATE-AS4TIME.
 L_OBJECT = 'TTYP'.
 WHEN OTHERS.
 CLEAR: L_DATE, L_TIME, L_OBJECT.
ENDCASE.
L_NAME = C_XDF_ATTR_OBJ.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_OBJECT
 RECEIVING RVAL = RC.
L_NAME = C_XDF_ATTR_TIMESTAMP.
CONCATENATE L_DATE L_TIME INTO L_VALUE.
CALL METHOD XDF_PARAMETER->SET_ATTRIBUTE
 EXPORTING NAME = L_NAME
 VALUE = L_VALUE
 RECEIVING RVAL = RC.
CALL METHOD XDF_ROOT_ELEMENT->APPEND_CHILD
 EXPORTING NEW_CHILD = XDF_PARAMETER
 RECEIVING RVAL = RC.
CHECK RC = 0.
END-OF-DEFINITION.
CLEAR DOCUMENT_OUTPUT_INFO.
CLEAR JOB_OUTPUT_INFO.
CLEAR JOB_OUTPUT_OPTIONS.
L_SFSY = SFSY.
CLEAR SFSY.
SFSY-PAGE = L_SFSY-PAGE.
SFSY-FORMPAGES = L_SFSY-FORMPAGES.
SFSY-JOBPAGES = L_SFSY-JOBPAGES.
SFSY-XDF = L_SFSY-XDF.
SFSY-XDF2 = L_SFSY-XDF2.
CLEAR INTSFSY.
IF CONTROL_PARAMETERS-NO_OPEN = SPACE.
 CALL FUNCTION 'SSF_CREATE_COMPOSER_INPUT'
 EXPORTING
 ARCHIVE_PARAMETERS = ARCHIVE_PARAMETERS
 USER_SETTINGS = USER_SETTINGS
 MAIL_SENDER = MAIL_SENDER
 MAIL_RECIPIENT = MAIL_RECIPIENT
 MAIL_APPL_OBJ = MAIL_APPL_OBJ
 OUTPUT_OPTIONS = OUTPUT_OPTIONS
 CONTROL_PARAMETERS = CONTROL_PARAMETERS
 IMPORTING
 INPUT = %INPUT.
IF OUTPUT_OPTIONS-XSFCMODE = SPACE.
 %INPUT-XSF = ' '.
 %INPUT-XSFOUTMODE = ' '.
 %INPUT-XSFOUTDEV = ' '.
 %INPUT-XSFACTION = ' '.
 %INPUT-XSFFORMAT = ' '.
ENDIF.
CALL FUNCTION 'SSFCOMP_OPEN'
 EXPORTING INPUT = %INPUT
 IMPORTING RESULT = %RESULT_OP
 EXCEPTIONS OTHERS = 1.
IF SY-SUBRC <> 0.
 %VARIANT = SPACE.
 PERFORM %RAISE.
ENDIF.
JOB_OUTPUT_OPTIONS = %RESULT_OP.
ENDIF.
IF SFSY-XDF = 'X'.
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
 EXPORTING
 FUNCNAME = '/1BCDWB/SF00000007'
 INACTIVE_VERSION = SPACE
 TABLES
 IMPORT_PARAMETER = IMPORT_PARAMETER
 CHANGING_PARAMETER = CHANGING_PARAMETER
 TABLES_PARAMETER = TABLES_PARAMETER
 EXPORT_PARAMETER = EXPORT_PARAMETER
 EXCEPTION_LIST = EXCEPTION_LIST
 EXCEPTIONS
 OTHERS = 1.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
L_GETSTATE-TBHD = L_GETSTATE-TBFD = L_GETSTATE-DTEL = 'X'.
L_GETSTATE-TTHD = L_GETSTATE-TTFD = 'X'.
LOOP AT IMPORT_PARAMETER.
 XDF_GET_DDIC_INFO IMPORT_PARAMETER IMPORT_PARAMETER-DBFIELD.
ENDLOOP.
LOOP AT CHANGING_PARAMETER.
 XDF_GET_DDIC_INFO CHANGING_PARAMETER
 CHANGING_PARAMETER-DBFIELD.
ENDLOOP.
LOOP AT TABLES_PARAMETER.
 XDF_GET_DDIC_INFO TABLES_PARAMETER TABLES_PARAMETER-DBSTRUCT.
ENDLOOP.
CALL FUNCTION 'DD_TYPEINFO_GET'
 EXPORTING GETSTATE = L_GETSTATE
 TABLES DDTYPES_TAB = L_DDIC_OBJ[]
 DD02L_TAB = L_DD02L_STATE[]
 DD04L_TAB = L_DD04L_STATE[]
 DD40L_TAB = L_DD40L_STATE[].
XDF_FACTORY = CL_IXML=>CREATE( ).
XDF_DOCUMENT = XDF_FACTORY->CREATE_DOCUMENT( ).
L_NAME = C_XDF_ROOT_ELEMENT.
XDF_ROOT_ELEMENT
 = XDF_DOCUMENT->CREATE_ELEMENT( NAME = L_NAME ).
CALL METHOD XDF_DOCUMENT->APPEND_CHILD
 EXPORTING NEW_CHILD = XDF_ROOT_ELEMENT
 RECEIVING RVAL = RC.
CHECK RC = 0.
LOOP AT IMPORT_PARAMETER.
 XDF_CREATE_DATA_STREAM IMPORT_PARAMETER
 IMPORT_PARAMETER-DBFIELD 'I'.
ENDLOOP.
LOOP AT CHANGING_PARAMETER.
 XDF_CREATE_DATA_STREAM CHANGING_PARAMETER
 CHANGING_PARAMETER-DBFIELD 'C'.
ENDLOOP.
LOOP AT TABLES_PARAMETER.
 XDF_CREATE_DATA_STREAM TABLES_PARAMETER
 TABLES_PARAMETER-DBSTRUCT 'T'.
ENDLOOP.
CALL FUNCTION 'SSFCOMP_XDF_OUTPUT'
 EXPORTING DOCUMENT = XDF_DOCUMENT
 EXCEPTIONS OTHERS = 1.
ELSEIF SFSY-XDF2 = 'X'.
XDF2_IXML = CL_IXML=>CREATE( ).
XDF2_DOCUMENT = XDF2_IXML->CREATE_DOCUMENT( ).
XDF2_APPEND_SRC_OBJECT ARCHIVE_INDEX ARCHIVE_INDEX.
XDF2_APPEND_SRC_OBJECT ARCHIVE_PARAMETERS ARCHIVE_PARAMETERS.
XDF2_APPEND_SRC_OBJECT CONTROL_PARAMETERS CONTROL_PARAMETERS.
XDF2_APPEND_SRC_OBJECT MAIL_APPL_OBJ MAIL_APPL_OBJ.
XDF2_APPEND_SRC_OBJECT MAIL_RECIPIENT MAIL_RECIPIENT.
XDF2_APPEND_SRC_OBJECT MAIL_SENDER MAIL_SENDER.
XDF2_APPEND_SRC_OBJECT OUTPUT_OPTIONS OUTPUT_OPTIONS.
XDF2_APPEND_SRC_OBJECT USER_SETTINGS USER_SETTINGS.
XDF2_APPEND_SRC_OBJECT ARCHIVE_INDEX_TAB ARCHIVE_INDEX_TAB.
XDF2_APPEND_SRC_OBJECT ORDERADM_H ORDERADM_H.
XDF2_APPEND_SRC_OBJECT ACTIVITY_H ACTIVITY_H.
XDF2_APPEND_SRC_OBJECT OPPORT_H OPPORT_H.
XDF2_APPEND_SRC_OBJECT ORGMAN_H ORGMAN_H.
XDF2_APPEND_SRC_OBJECT PARTNER_H PARTNER_H.
XDF2_APPEND_SRC_OBJECT PRICINGDATA_H PRICINGDATA_H.
XDF2_APPEND_SRC_OBJECT SALES_H SALES_H.
XDF2_APPEND_SRC_OBJECT SHIPPING_H SHIPPING_H.
XDF2_APPEND_SRC_OBJECT PAYPLAN_D_H PAYPLAN_D_H.
XDF2_APPEND_SRC_OBJECT CUMULAT_H CUMULAT_H.
XDF2_APPEND_SRC_OBJECT CUSTOMER_H CUSTOMER_H.
XDF2_APPEND_SRC_OBJECT ACS_H ACS_H.
XDF2_APPEND_SRC_OBJECT BILLING_H BILLING_H.
XDF2_APPEND_SRC_OBJECT CANCEL_H CANCEL_H.
XDF2_APPEND_SRC_OBJECT APPOINTMENT_H APPOINTMENT_H.
XDF2_APPEND_SRC_OBJECT BILLPLAN_D_H BILLPLAN_D_H.
XDF2_APPEND_SRC_OBJECT BILLPLAN_H BILLPLAN_H.
XDF2_APPEND_SRC_OBJECT STATUS_D_H STATUS_D_H.
XDF2_APPEND_SRC_OBJECT STATUS_H STATUS_H.
XDF2_APPEND_SRC_OBJECT SRV_SUBJECT_H SRV_SUBJECT_H.
XDF2_APPEND_SRC_OBJECT SRV_SUBJECT_I SRV_SUBJECT_I.
XDF2_APPEND_SRC_OBJECT SRV_REASON_H SRV_REASON_H.
XDF2_APPEND_SRC_OBJECT SRV_RESULT_H SRV_RESULT_H.
XDF2_APPEND_SRC_OBJECT SRV_REFOBJ_H SRV_REFOBJ_H.
XDF2_APPEND_SRC_OBJECT SRV_REFOBJ_I SRV_REFOBJ_I.
XDF2_APPEND_SRC_OBJECT ORDERADM_I ORDERADM_I.
XDF2_APPEND_SRC_OBJECT ORDERADM_I_IN ORDERADM_I_IN.
XDF2_APPEND_SRC_OBJECT ORDERADM_I_QT ORDERADM_I_QT.
XDF2_APPEND_SRC_OBJECT ORGMAN_I ORGMAN_I.
XDF2_APPEND_SRC_OBJECT PRICINGDATA_I PRICINGDATA_I.
XDF2_APPEND_SRC_OBJECT PRICING_I PRICING_I.
XDF2_APPEND_SRC_OBJECT PRODUCT_I PRODUCT_I.
XDF2_APPEND_SRC_OBJECT SALES_I SALES_I.
XDF2_APPEND_SRC_OBJECT SERVICE_I SERVICE_I.
XDF2_APPEND_SRC_OBJECT SCHEDLIN_I SCHEDLIN_I.
XDF2_APPEND_SRC_OBJECT SCHEDLIN_I_CF SCHEDLIN_I_CF.
XDF2_APPEND_SRC_OBJECT SHIPPING_I SHIPPING_I.
XDF2_APPEND_SRC_OBJECT PARTNER_I PARTNER_I.
XDF2_APPEND_SRC_OBJECT ITEM_CSTICS_I ITEM_CSTICS_I.
XDF2_APPEND_SRC_OBJECT CUSTOMER_I CUSTOMER_I.
XDF2_APPEND_SRC_OBJECT BILLING_I BILLING_I.
XDF2_APPEND_SRC_OBJECT CANCEL_I CANCEL_I.
XDF2_APPEND_SRC_OBJECT FINPROD_I FINPROD_I.
XDF2_APPEND_SRC_OBJECT ORDPRP_I ORDPRP_I.
XDF2_APPEND_SRC_OBJECT APPOINTMENT_I APPOINTMENT_I.
XDF2_APPEND_SRC_OBJECT BILLPLAN_D_I BILLPLAN_D_I.
XDF2_APPEND_SRC_OBJECT BILLPLAN_I BILLPLAN_I.
XDF2_APPEND_SRC_OBJECT STATUS_I STATUS_I.
XDF2_APPEND_SRC_OBJECT WORKING_SET_E_S_BBP WORKING_SET_E_S_BBP.
XDF2_APPEND_SRC_OBJECT LANGUAGE LANGUAGE.
XDF2_APPEND_SRC_OBJECT SERVICE_I_ASSI SERVICE_I_ASSI.
XDF2_APPEND_SRC_OBJECT FORM_TYPE FORM_TYPE.
XDF2_APPEND_SRC_OBJECT Y_V_PARTNER_FLAG Y_V_PARTNER_FLAG.
XDF2_APPEND_SRC_OBJECT JOB_OUTPUT_INFO JOB_OUTPUT_INFO.
CALL TRANSFORMATION ID
 SOURCE (XDF2_SRC_OBJECTS)
 RESULT XML XDF2_DOCUMENT.
CALL FUNCTION 'SSFCOMP_XDF2_OUTPUT'
 EXPORTING
 DOCUMENT = XDF2_DOCUMENT
 EXCEPTIONS
 OTHERS = 1.
IF SY-SUBRC <> 0. RAISE ERROR. ENDIF.
ELSE.
%FULLNAME-VARI = %VARIANT.
%VARIANT = SPACE.
IF %HEADER IS INITIAL.
 IMPORT HEADER TO %HEADER
 REFTAB TO %REFTAB
 DOCSTRUC TO %DOCSTRUC
 TABDEF TO %TABDEFS
 FROM DATABASE STXFCONTR(SF) ID %FULLNAME.
 IF SY-SUBRC <> 0.
 CALL FUNCTION 'SSFRT_SET_ERROR_PARAMETERS'
 EXPORTING I_FORM = 'YCRM_ORDER_SERVICE_RMA'.
 CALL FUNCTION 'SSFRT_WRITE_ERROR'
 EXPORTING I_ERRNUMBER = SSF_ERR_NO_RUNTIME_OBJECT
 I_MSGID = 'SSFCOMPOSER'
 I_MSGNO = '002'
 I_MSGV1 = 'YCRM_ORDER_SERVICE_RMA'.
 PERFORM %RAISE.
 ENDIF.
 SELECT SINGLE SDATE STIME FROM D010SINF
 INTO (%HEADER-SDATE, %HEADER-STIME)
 WHERE PROG = '/1BCDWB/SAPLSF00000007'
 AND R3STATE = 'A'.
 IF SY-SUBRC <> 0.
 CLEAR: %HEADER-SDATE,
 %HEADER-STIME.
 ENDIF.
ENDIF.
LOOP AT %TABDEFS INTO %TABDEF.
 CALL FUNCTION 'SSFCOMP_TABLE_DEFINITION'
 EXPORTING CPI = %HEADER-CPI
 LPI = %HEADER-LPI
 CHANGING TABDEF = %TABDEF
 EXCEPTIONS OTHERS = 1.
 IF SY-SUBRC <> 0. PERFORM %RAISE. ENDIF.
ENDLOOP.
CALL FUNCTION 'SSFRT_SET_REFERENCES'
 EXPORTING I_REFTAB = %REFTAB .
CALL FUNCTION 'SSFRT_SET_LANGUAGES'
 EXPORTING I_CONTROL_PARAMETERS = CONTROL_PARAMETERS
 I_MASTERLANGUAGE = 'E'
 I_THRULANG = ' '
 I_INSTALL_LANG = ' '
 IMPORTING O_LANGUAGES = %LANGUAGES.
%HEADER-LANGU = %LANGUAGES-LANGU1.
%WEXIT = SPACE.
PERFORM %GLOBAL_CLEAR.
PERFORM %GLOBAL_INIT.
CLEAR %ARCTAB.
IF ARCHIVE_INDEX_TAB[] IS INITIAL.
 APPEND ARCHIVE_INDEX TO %ARCTAB.
ELSE.
 %ARCTAB = ARCHIVE_INDEX_TAB.
ENDIF.
> CALL FUNCTION 'SSFCOMP_PROCESS_DOCUMENT'
 EXPORTING HEADER = %HEADER
 DOCSTRUC = %DOCSTRUC
 STARTPAGE = CONTROL_PARAMETERS-STARTPAGE
 ARCHIV_INDEX_TAB = %ARCTAB
 MAIL_APPL_OBJECT = MAIL_APPL_OBJ
 IMPORTING RESULT = %RESULT_PD
 EXCEPTIONS OTHERS = 1.
IF SY-SUBRC <> 0. PERFORM %RAISE. ENDIF.
DOCUMENT_OUTPUT_INFO = %RESULT_PD.
ENDIF.
The function module 'SSFCOMP_PROCESS_DOCUMENT' is returning sy-subrc value 1.
Could you please tell me how to rectify this error
Thanks and Regards,
Soumya.

The error I am getting is a formatting error as shown below:
L_ERROR-MSGTY E
L_ERROR-MSGID SSFCOMPOSER
L_ERROR-MSGV1 YTI_FCR004_RETREP_TYPE

Please help me with the following two questions, very urgent

Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.

hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

How to use CALL FUNCTION '/1BCDWB/SF00000014' in smartform urgent

hiiiiiiiii
Iam doing classical report n i want my output to be printed in smartform.
So my output is in IT_FINAL table.In smartform in Form Interface Table column i had declare :::
Parameter Name: IT_FINAL
Type Assignment:LIKE
Associated Type:ZSD_FINAL ( Its a structure of IT_FINAL)
And in SE38..iam using...............
data: FM_NAME1 type RS38L_FNAM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCSF_SDPRSR03_PR'
importing
FM_NAME = FM_NAME1.
CALL FUNCTION FM_NAME1
EXPORTING
IT_FINAL = IT_FINAL.
So while running its giving dump..
I DONT KNOW HOW TO USE THE ABOVE FUNCTION MODULE.
CALL FUNCTION '/1BCDWB/SF00000014'
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please suggest me with example if possible......URGENT.
(Rewards if solved)
Regards.

Hi
see the below doc and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Regards
Anji

Text printing in smartforms

Hi All,
My smartform has 3 pages namely FIRST, NEXT and TERMS.
I have 2 texts ( T1 and T2) to be printed on the smartforms. These texts are defined only in the first and the next pages.
The condition is that these 2 texts(T1 and T2) should be printed only till the 3rd last page and in the second last page only one text( T2) needs to be printed.
For example if there are 5 pages in a smartform then T1 and T2 both should be printed till page 3 and then T2 only should be printed on page 4.
I am trying to use the logic by comparing the values of sfsy-jobpages and sfsy-page but at runtime they are having the same values depending on the page the cursor is there.
Plz help me out to achieve this.

hi
program lines is a node that we can insert in a loop within a window...you can code any logic just like in a normal abap program..so, you could do something like this
DATA: page1 type i, page2 type i, totalpage type i.
--->in your first page
totalpage = &sfsy-formpages&
page1 = &sfsy-page&
if page1 < ( totalpage - 2 )
write: T1, T2.
endif.
-->in your second page
totalpage = &sfsy-formpages&
page1 = &sfsy-page&
if page1 < ( totalpage - 2 )
write: T1, T2.
endif.
if page1 = totalpage - 1.
write T2.
endif.
if helpful, reward
Sathish. R

Help required in Reading smartform

Hi Everyone,
Can any one please tell me if there is any function module to read a smartform and its nodes. Function module READ_FORM is there for reading the scripts. Is there any similar function module to read smartforms.
Awaiting your response.
Regards,
Srinivas

hai.
this may help u.
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
regards.
sowjanya.b.

How to Pass internal table from a program to Samrt form

Hi Pals
I want to pass an internal table which I have declared in the program to Smartform..can you please help
me asap.
Regards
Praveen

Hai.
check link.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRSF/BCSRVSCRSF.pdf
check this.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Insert Images in smartforms
regards.
sowjanya.b.

SFSY-FORMPAGES and SFSY-JOBPAGES

Similar Messages

Maybe you are looking for