SFTP in Krusader as user: "Unknown error"

Hello,
I would like to connect to various sftp-servers using Krusader, but most* of my attempts fail, and I get the following error message:
Unknown error:
SFTP error: 1
Execution of the ssh program didn't succeed.
(1st line verbatim, 2nd and 3rd backtranslation.)
Fish now seems to be working, but it was not always so, I used to get:
The process for the fish://<myserver> protocol died unexpectedly.
(verbatim)
Command line ssh/sftp works flawlessly, smb through Krusader too.
However, if I run Krusader as root, both sftp and fish works.
Moving ~/.kde4 or ~/.ssh doesn't help.
Maybe relevant: I use a non-default port for ssh.
I have both kdebase-runtime and kdelibs installed (mentioned in this thread), however I don't have a full KDE installed, I use Openbox. After an sftp attempt, 'ps -e' lists kio_sftp.
(It's possibly not some "recent Syu" bug, I have never tried it under Arch before.)
I'm actually out of ideas how to continue debugging, anybody else?
Thanks in advance.
*Actually it succeeds if it is my very first ssh/sftp activity since the last reboot. So I can reenable sftp-ability in Krusader by rebooting; restarting just Krusader, X or remote sshd doesn't help.

When you send mail to that "bad account", check the ldap access log. Suspect that there's a duplication of mail address with somebody having the same alternate address.
Look at that access log, for the search, and note the result. If "nentries=2", that's the problem
:

Similar Messages

  • Mavericks mail server "user unknown" error

    For some reason, the mail server bounces the email sent to local network users and returns a "user unknown" error. The same error is received when an email from an external domain is sent to one of the open directory associated email addresses.
    However, sending email from these accounts works just fine, just like sending and receiving email associated with the diradmin account.

    Hi Jeffrey,
    Changed the mx record to the juffrou......net domain, without succes.
    Please find the export below.
    Regards,
    Lex
    juffrouwjannie:~ xandstorm-juffrpuw-jannie$ sudo serveradmin settings mail
    Password:
    mail:postfix:smtpd_pw_server_security_options:_array_index:0 = "cram-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:1 = "digest-md5"
    mail:postfix:smtpd_pw_server_security_options:_array_index:2 = "gssapi"
    mail:postfix:smtpd_pw_server_security_options:_array_index:3 = "login"
    mail:postfix:smtpd_pw_server_security_options:_array_index:4 = "plain"
    mail:postfix:spam_quarantine = "[email protected]"
    mail:postfix:smtp_reject_list_enabled = no
    mail:postfix:smtp_sasl_auth_enable = no
    mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:username = "submit"
    mail:postfix:submit_cred:juffrouwjannie.vanderwerff.net:password = "lvFBZ9973YcUBWtAPEX7Dq"
    mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:username = "submit"
    mail:postfix:submit_cred:XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local:password = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_userid = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_pwd = ""
    mail:postfix:smtp_auth_relay_dict:smtp_auth_relay_host = ""
    mail:postfix:client_permit_mynetworks = yes
    mail:postfix:smtpd_tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"
    mail:postfix:maps_rbl_domains_enabled = yes
    mail:postfix:spam_subject_tag = "***JUNK MAIL*** "
    mail:postfix:smtpd_tls_CAfile = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
    mail:postfix:message_size_limit_enabled = yes
    mail:postfix:virus_db_last_update = "2014-04-19 19:50:45 +0000"
    mail:postfix:mail_enabled_groups = _empty_array
    mail:postfix:add_whitelist_domain:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
    mail:postfix:add_whitelist_domain:_array_index:1 = "vanderwerff.net"
    mail:postfix:virus_scan_enabled = no
    mail:postfix:spam_notify_admin_email = "[email protected]"
    mail:postfix:virus_db_log_level = "info"
    mail:postfix:black_hole_domains:_array_index:0 = "zen.spamhaus.org"
    mail:postfix:spam_ok_locales = "en"
    mail:postfix:spam_scan_enabled = yes
    mail:postfix:virus_quarantine = "[email protected]"
    mail:postfix:reject_unauth_piplining_enabled = no
    mail:postfix:spam_rewrite_subject = yes
    mail:postfix:message_size_limit = 10485760
    mail:postfix:mynetworks:_array_index:0 = "127.0.0.0/8"
    mail:postfix:mynetworks:_array_index:1 = "[::1]/128"
    mail:postfix:virus_log_level = "info"
    mail:postfix:host_whitelist:_array_index:0 = "juffrouwjannie.vanderwerff.net"
    mail:postfix:rbl_override_list = _empty_array
    mail:postfix:greylist_enabled = no
    mail:postfix:list_server_log_level = "info"
    mail:postfix:group_expansion:start_interval = 10
    mail:postfix:group_expansion:enable_group_expansion = no
    mail:postfix:virus_notify_recipients = no
    mail:postfix:luser_relay_enabled = no
    mail:postfix:mydomain = "vanderwerff.net"
    mail:postfix:enable_list_server = yes
    mail:postfix:mydestination:_array_index:0 = "localhost"
    mail:postfix:mydestination:_array_index:1 = "$mydomain"
    mail:postfix:virus_notify_admin_email = "[email protected]"
    mail:postfix:enable_virtual_domains = no
    mail:postfix:spam_notify_admin = no
    mail:postfix:required_hits = 6
    mail:postfix:add_whitelist_host:_array_index:0 = "juffrouwjannie.vanderwerff.net"
    mail:postfix:always_bcc_enabled = no
    mail:postfix:enable_var_mail = no
    mail:postfix:enable_smtp = yes
    mail:postfix:smtpd_tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
    mail:postfix:relayhost = ""
    mail:postfix:mynetworks_enabled = no
    mail:postfix:virtual_domains = _empty_array
    mail:postfix:spam_ok_languages = "en"
    mail:postfix:rbl_override_enabled = no
    mail:postfix:log_rolling_days = 1
    mail:postfix:enable_smtp_in = yes
    mail:postfix:virtual_users_maps = _empty_array
    mail:postfix:tls_server_options = "require"
    mail:postfix:spam_action = "deliver"
    mail:postfix:log_rolling_days_enabled = yes
    mail:postfix:list_server_post_to_archve = no
    mail:postfix:spam_log_level = "warn"
    mail:postfix:smtp_uce_controlls = 1
    mail:postfix:relayhost_enabled = no
    mail:postfix:list_server_share_archives = no
    mail:postfix:virus_action = "delete"
    mail:postfix:virus_db_update_days = 12
    mail:postfix:virus_notify_admin = no
    mail:postfix:domain_whitelist:_array_index:0 = "XANDSTORM-JUFFRPUW-JANNIEs-Mac-mini.local"
    mail:postfix:domain_whitelist:_array_index:1 = "vanderwerff.net"
    mail:postfix:enable_smtp_out = yes
    mail:postfix:text_only_attachments = no
    mail:postfix:reject_unknown_client_enabled = no
    mail:postfix:log_level = "info"
    mail:postfix:myhostname = "juffrouwjannie.vanderwerff.net"
    mail:global:auto_auth = no
    mail:global:skip_enable_service_check = no
    mail:global:service_data_path = "/Library/Server/Mail"
    mail:imap:aps_topic = "com.apple.mail.XServer.0051960a-2429-481a-b784-c073eed597e1"
    mail:imap:servername = ""
    mail:imap:imap_auth_clear = yes
    mail:imap:auth_gssapi_hostname = ""
    mail:imap:admins = _empty_array
    mail:imap:lmtp_luser_relay_enabled = no
    mail:imap:lmtp_luser_relay = ""
    mail:imap:pop_auth_clear = yes
    mail:imap:enable_listid_autosave = "no"
    mail:imap:max_imap_connections = 1000
    mail:imap:log_level = "info"
    mail:imap:tls_key_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.key.pem"
    mail:imap:imap_auth_plain = yes
    mail:imap:postmaster_address = "[email protected]"
    mail:imap:quotawarn = 80
    mail:imap:enable_quota_warnings = no
    mail:imap:pop_auth_gssapi = no
    mail:imap:junk_mail_userid = "junkmail"
    mail:imap:global_quota = 0
    mail:imap:partitions = _empty_array
    mail:imap:tls_ca_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.chain.pem"
    mail:imap:enforce_quotas = no
    mail:imap:not_junk_mail_userid = "notjunkmail"
    mail:imap:imap_auth_digest_md5 = yes
    mail:imap:request_enable_webmail = no
    mail:imap:client_cert_enabled = no
    mail:imap:aps_topic_enabled = yes
    mail:imap:imap_auth_gssapi = no
    mail:imap:tls_server_options = "require"
    mail:imap:pop_auth_apop = yes
    mail:imap:quota_full_tempfail = yes
    mail:imap:imap_urlauth_host = " "
    mail:imap:enable_imap = yes
    mail:imap:postmaster = "postmaster"
    mail:imap:enable_pop = yes
    mail:imap:partition-default = "/Library/Server/Mail/Data/mail"
    mail:imap:imap_auth_login = yes
    mail:imap:enable_sieve = yes
    mail:imap:imap_auth_cram_md5 = yes
    mail:imap:notification_server_enabled = yes
    mail:imap:tls_cert_file = "/etc/certificates/juffrouwjannie.vanderwerff.net.69F8227930804D0241A279CBC08AF DFBA687F300.cert.pem"

  • SMTP Error 5.1.1 ... User Unknown Error

    Hi All,
    I have installed Sun Java System Mesaaging Server 2005Q4 version. I have to configure the domain such that it doesnt conflict with the default domain in the organization. Say, if the default domain is abc.com, I have to a create a domain x123.abc.com where x123 will be the hostname.
    I am not sure if this is possbile, but when I tried to sent email by making x123.abc.com as my default domain I get the SMTP error 5.1.1 while trying to send the mail.
    It would be really helpful if someone could help me.
    Thanks & Regards,
    Soma.

    Hi and thanks for the response,
    Firstly I am not using MX and x123 will be my host machine where I have installed my Messaging. I am not using smtp auth, I am addressing the message to [email protected].
    And for Jay,
    I tried to send mail from and to the admin user [email protected].
    I ran the command imsimta and the result is below,
    root@s1009 # clear
    root@s1009 # ./imsimta test -rewrite -debug [email protected]
    Initializing mm_.
    Initializing mm_ submission.
    Checking identifiers.
    *** Debug output from initializing MM for submission:
    10:28:27.82: Debug output enabled, message enqueue routines version V6.2-3.04 compiled Jul 15 200501:43:19
    10:28:27.82: mmc_winit('l','[email protected]','[email protected]') called.
    10:28:27.82: Queue area size 29579486, temp area size 1175898
    10:28:27.82: 7394871 blocks of effective free queue space available; setting disk limit accordingly.
    10:28:27.82: 587949 blocks of free temporary space available; setting disk limit accordingly.
    10:28:27.82: Rewriting: Mbox = "postmaster", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:27.82: Rewrite: "$*", position 0, hash table -
    10:28:27.82: Found: "$A$E$F$U%[email protected]"
    10:28:27.82: Rewrite failed, not forward.
    10:28:27.82: Rewrite: "$*", position 1, hash table -
    10:28:27.83: Failed.
    10:28:27.83: Rewrite: "$*", position 0, rewrite database -
    10:28:27.83: Failed
    10:28:27.83: Rewriting: Mbox = "postmaster", host = "s1009", domain = "s1009.prodapt.com", literal = "", tag = ""
    10:28:27.83: Rewrite: "s1009.prodapt.com", position 0, hash table -
    10:28:27.83: Found: "$U%[email protected]"
    10:28:27.83: New mailbox: "postmaster".
    10:28:27.83: New host: "s1009.prodapt.com".
    10:28:27.83: New route: "s1009.prodapt.com".
    10:28:27.83: New channel system: "s1009.prodapt.com".
    10:28:27.83: Looking up host "s1009.prodapt.com".
    10:28:27.83: - found on channel l
    10:28:27.83: Routelocal flag set; scanning for % and !
    10:28:27.83: Checking reverse URL cache for: [email protected]
    10:28:27.83: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
    10:28:27.88: Resulting URL: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.88: mmc_open_url called to open ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
    10:28:27.88: URL with quotes stripped: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.88: LDAP URL identified
    10:28:27.88: URL context #1 will be used
    10:28:27.88: Performing URL search on: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.93: mmc_read_url result: [cn=Postmaster,ou=Groups,o=s1009.prodapt.com,dc=prodapt,dc=com]
    10:28:27.93: URL resolution returned: [cn=Postmaster,ou=Groups,o=s1009.prodapt.com,dc=prodapt,dc=com]
    10:28:27.93: mmc_read_url result: [mail] [email protected]
    10:28:27.93: URL resolution returned: [mail] [email protected]
    10:28:27.93: Attribute index: 16
    10:28:27.93: LDAP URL produced address [email protected]
    10:28:27.93: No more result to return
    10:28:27.93: Override postmaster: [email protected]
    10:28:27.93: Mapped return address: [email protected]
    10:28:27.93: from_access mapping check: ||MAIL|l|[email protected]|
    10:28:27.93: - passed.
    10:28:27.93: Rewriting: Mbox = "postmaster", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:27.93: Rewrite: "$*", position 0, hash table -
    10:28:27.93: Found: "$A$E$F$U%[email protected]"
    10:28:27.93: Rewrite failed, not forward.
    10:28:27.93: Rewrite: "$*", position 1, hash table -
    10:28:27.93: Failed.
    10:28:27.93: Rewrite: "$*", position 0, rewrite database -
    10:28:27.93: Failed
    10:28:27.93: Rewriting: Mbox = "postmaster", host = "s1009", domain = "s1009.prodapt.com", literal = "", tag = ""
    10:28:27.93: Rewrite: "s1009.prodapt.com", position 0, hash table -
    10:28:27.93: Found: "$U%[email protected]"
    10:28:27.94: New mailbox: "postmaster".
    10:28:27.94: New host: "s1009.prodapt.com".
    10:28:27.94: New route: "s1009.prodapt.com".
    10:28:27.94: New channel system: "s1009.prodapt.com".
    10:28:27.94: Looking up host "s1009.prodapt.com".
    10:28:27.94: - found on channel l
    10:28:27.94: Routelocal flag set; scanning for % and !
    *** Debug output from rewriting a forward header address:
    10:28:27.94: Rewriting: Mbox = "Store.Administrator", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:27.94: Rewrite: "$*", position 0, hash table -
    10:28:27.94: Found: "$A$E$F$U%[email protected]"
    10:28:27.94: Rewrite failed, not envelope.
    10:28:27.94: Rewrite: "$*", position 1, hash table -
    10:28:27.94: Failed.
    10:28:27.94: Rewrite: "$*", position 0, rewrite database -
    10:28:27.94: Failed
    10:28:27.94: Rewriting: Mbox = "Store.Administrator", host = "s1009", domain = "s1009.prodapt.com", literal = "", tag = ""
    10:28:27.94: Rewrite: "s1009.prodapt.com", position 0, hash table -
    10:28:27.94: Found: "$U%[email protected]"
    10:28:27.94: New mailbox: "Store.Administrator".
    10:28:27.94: New host: "s1009.prodapt.com".
    10:28:27.94: New route: "s1009.prodapt.com".
    10:28:27.94: New channel system: "s1009.prodapt.com".
    10:28:27.94: Looking up host "s1009.prodapt.com".
    10:28:27.94: - found on channel l
    10:28:27.94: Routelocal flag set; scanning for % and !
    10:28:27.94: Rewrite rules result: [email protected]
    10:28:27.94: Checking reverse URL cache for: [email protected]
    10:28:27.94: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
    10:28:27.94: Resulting URL: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.94: mmc_open_url called to open ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
    10:28:27.94: URL with quotes stripped: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.94: LDAP URL identified
    10:28:27.94: URL context #1 will be used
    10:28:27.94: Performing URL search on: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?preferredlanguage,mail,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
    10:28:27.99: mmc_read_url result: [uid=admin, ou=People, o=s1009.prodapt.com,dc=prodapt,dc=com]
    10:28:27.99: URL resolution returned: [uid=admin, ou=People, o=s1009.prodapt.com,dc=prodapt,dc=com]
    10:28:27.99: mmc_read_url result: [mail] [email protected]
    10:28:27.99: URL resolution returned: [mail] [email protected]
    10:28:27.99: Attribute index: 16
    10:28:27.99: LDAP URL produced address [email protected]
    10:28:27.99: No more result to return
    *** Debug output from rewriting a forward envelope address:
    10:28:27.99: Rewriting: Mbox = "Store.Administrator", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:27.99: Rewrite: "$*", position 0, hash table -
    10:28:27.99: Found: "$A$E$F$U%[email protected]"
    10:28:27.99: Match, pattern = "s1009.prodapt.com", current = "(*domaincheck*)"
    10:28:27.99: old state = not checked.
    10:28:27.99: Domain check on s1009.prodapt.com.
    10:28:27.99: Added domain result 1 to cache for s1009.prodapt.com.
    10:28:27.99: new state = succeeded.
    10:28:27.99: New mailbox: "Store.Administrator".
    10:28:27.99: New host: "s1009.prodapt.com".
    10:28:27.99: New route: "s1009.prodapt.com".
    10:28:27.99: New channel system: "s1009.prodapt.com".
    10:28:27.99: Looking up host "s1009.prodapt.com".
    10:28:27.99: - found on channel l
    10:28:27.99: Routelocal flag set; scanning for % and !
    forward channel = l
    channel description =
    channel user filter =
    dest channel filter =
    source channel filter =
    channel flags #0 = BIDIRECTIONAL MULTIPLE IMMNONURGENT NOSERVICEALL
    channel flags #1 = NOSMTP DEFAULT
    channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
    channel flags #3 = NOLOGGING NOGREY NORESTRICTED RETAINSECURITYMULTIPARTS
    channel flags #4 = EIGHTBIT NOHEADERTRIM NOHEADERREAD RULES
    channel flags #5 =
    channel flags #6 = LOCALUSER REPORTNOTARY
    channel flags #7 = NOSWITCHCHANNEL NOREMOTEHOST DATEFOUR DAYOFWEEK
    channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
    channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALSYSTEM NOTURN
    defaulthost = s1009.prodapt.com s1009.prodapt.com
    linelength = 1023
    channel env addr type = SOURCEROUTE
    channel hdr addr type = SOURCEROUTE
    channel official host = s1009.prodapt.com
    channel queue 0 name = LOCAL_POOL
    channel queue 1 name = LOCAL_POOL
    channel queue 2 name = LOCAL_POOL
    channel queue 3 name = LOCAL_POOL
    channel after params =
    channel user name =
    urgentnotices = 1 2 4 7
    normalnotices = 1 2 4 7
    nonurgentnotices = 1 2 4 7
    channel rightslist ids =
    local behavior flags = %x7
    expandchannel =
    notificationchannel =
    dispositionchannel =
    saslswitchchannel =
    tlsswitchchannel =
    backward channel = l
    header To: address = [email protected]
    header From: address = [email protected]
    envelope To: address = [email protected] (route (s1009.prodapt.com,s1009.prodapt.com)) (host s1009.prodapt.com)
    envelope From: address = [email protected]
    name =
    mbox = Store.Administrator
    Extracted address action list:
    [email protected]
    Extracted 733 address action list:
    [email protected]
    Address list expansion:
    *** Debug output from alias expansion:
    10:28:27.99: Inner expand, level = 0, mailbox = [email protected]
    10:28:27.99: Rewriting: Mbox = "Store.Administrator", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:27.99: Rewrite: "$*", position 0, hash table -
    10:28:27.99: Found: "$A$E$F$U%[email protected]"
    10:28:27.99: Match, pattern = "s1009.prodapt.com", current = "(*domaincheck*)"
    10:28:27.99: old state = not checked.
    10:28:27.99: Using result 1 from domain match cache.
    10:28:27.99: new state = succeeded.
    10:28:27.99: New mailbox: "Store.Administrator".
    10:28:27.99: New host: "s1009.prodapt.com".
    10:28:27.99: New route: "s1009.prodapt.com".
    10:28:27.99: New channel system: "s1009.prodapt.com".
    10:28:27.99: Looking up host "s1009.prodapt.com".
    10:28:27.99: - found on channel l
    10:28:27.99: Routelocal flag set; scanning for % and !
    10:28:27.99: Reparsed mailbox: Store.Administrator
    10:28:27.99: Reparsed host: s1009.prodapt.com
    10:28:27.99: Variant #1 = [email protected]
    10:28:27.99: Variant #2 = *@s1009.prodapt.com
    10:28:27.99: Variant #3 = Store.Administrator
    10:28:27.99: LDAP URL template identified
    10:28:28.00: URL determined to be: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?*?sub?(|([email protected])([email protected])([email protected]))
    10:28:28.00: URL context #1 will be used
    10:28:28.00: Performing URL search on: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?objectclass,inetuserstatus,mailuserstatus,inetMailGroupStatus,uid,preferredLanguage,mailRoutingAddress,mailDeliveryOption,mail,mailAlternateAddress,mailEquivalentAddress,vacationStartDate,vacationEndDate,mailConversionTag,mailMsgMaxBlocks,mailhost,mailQuota,mailMsgQuota,mailProgramDeliveryInfo,mailDeliveryFileURL,mailDeliveryFile,mailAutoReplyMode,mailAutoReplySubject,mailAutoReplyText,mailAutoReplyTextInternal,mailAutoReplyTimeOut,mailSieveRuleSource,mailForwardingAddress,mailDeferProcessing,mgrpMsgRejectAction,mgrpRejectText,mgrpMsgRejectText,mgrpBroadcasterPolicy,mgrpDisallowedBroadcaster,mgrpAllowedBroadcaster,mgrpDisallowedDomain,mgrpAllowedDomain,mgrpMsgMaxSize,mgrpAuthPassword,mgrpModerator,mgrpDeliverTo,memberURL,UniqueMember,mgrpRFC822MailMember,rfc822MailMember,mgrpErrorsTo,mgrpAddHeader,mgrpRemoveHeader,mgrpMsgPrefixText,mgrpMsgSuffixText,mgmanMemberVisibility,expandable?sub?(|([email protected]:28:28.06: Scanning LDAP result.
    10:28:28.06: Attribute: objectclass
    10:28:28.06: Attribute index: 0
    10:28:28.06: Attribute: inetuserstatus
    10:28:28.06: Attribute index: 1
    10:28:28.06: Attribute: mailuserstatus
    10:28:28.06: Attribute index: 2
    10:28:28.06: Attribute: uid
    10:28:28.06: Attribute index: 5
    10:28:28.06: Attribute: mailDeliveryOption
    10:28:28.06: Attribute index: 13
    10:28:28.06: Attribute: mail
    10:28:28.06: Attribute index: 16
    10:28:28.06: Attribute: mailhost
    10:28:28.06: Attribute index: 30
    10:28:28.06: Attribute: mailQuota
    10:28:28.06: Attribute index: 31
    10:28:28.06: Attribute: mailMsgQuota
    10:28:28.06: Attribute index: 32
    10:28:28.06: Scanning complete, begin actions
    10:28:28.06: Possible user object classes: inetLocalMailRecipient+inetmailuser
    10:28:28.06: Possible group object classes: inetLocalMailRecipient+inetmailgroup
    10:28:28.06: Object class: top
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: person
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: inetorgperson
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: iplanet-am-managed-person
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: organizationalPerson
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: inetUser
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: ipUser
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: userPresenceProfile
    10:28:28.06: Object class didn't match
    10:28:28.06: Object class: inetMailUser
    10:28:28.06: Object class match, reference value 1
    10:28:28.06: Object class: inetLocalMailRecipient
    10:28:28.06: Object class match, reference value 18
    10:28:28.06: User/group index = 1
    10:28:28.06: Domain is active
    10:28:28.06: Mail domain is active
    10:28:28.06: User status = active
    10:28:28.06: User is active
    10:28:28.06: Mail user status = active
    10:28:28.06: User is active
    10:28:28.06: User UID admin found.
    10:28:28.06: Delivery option: mailbox
    10:28:28.06: Delivery options value: 1
    10:28:28.06: Block limit now: 2147483647
    10:28:28.06: Processing mailhost attribute s1009.prodapt.com
    10:28:28.06: Mailhost references local system
    10:28:28.06: Disk quota: -1.
    10:28:28.06: Message quota: -1.
    10:28:28.06: Adding result to cache.
    10:28:28.06: Status for this address = 1
    10:28:28.06: Delivery option template: $M%$\$2I$_+$2S@ims-ms-daemon
    10:28:28.06: Delivery option result: admin@ims-ms-daemon
    10:28:28.06: Inner expand, level = 1, mailbox = admin@ims-ms-daemon
    10:28:28.06: Rewriting: Mbox = "admin", host = "ims-ms-daemon", domain = "$*", literal = "", tag = ""
    10:28:28.06: Rewrite: "$*", position 0, hash table -
    10:28:28.07: Found: "$A$E$F$U%[email protected]"
    10:28:28.07: Match, pattern = "ims-ms-daemon", current = "(*domaincheck*)"
    10:28:28.07: old state = not checked.
    10:28:28.07: Domain check on ims-ms-daemon.
    10:28:28.07: Added domain result 0 to cache for ims-ms-daemon.
    10:28:28.07: new state = fail pending.
    10:28:28.07: Rewrite failed due to prechannel mismatch.
    10:28:28.07: Rewrite: "$*", position 1, hash table -
    10:28:28.07: Failed.
    10:28:28.07: Rewrite: "$*", position 0, rewrite database -
    10:28:28.07: Failed
    10:28:28.07: Rewriting: Mbox = "admin", host = "ims-ms-daemon", domain = "ims-ms-daemon", literal = "", tag = ""
    10:28:28.07: Rewrite: "ims-ms-daemon", position 0, hash table -
    10:28:28.07: Failed.
    10:28:28.07: Rewrite: "ims-ms-daemon", position 0, rewrite database -
    10:28:28.07: Failed
    10:28:28.07: Looking up host "ims-ms-daemon".
    10:28:28.07: - found on channel ims-ms
    admin@ims-ms-daemon
    1 expansion total.
    *** Debug output from submitting an envelope address:
    10:28:28.07: mmc_wadr(0x0012b670,'[email protected]','[email protected]') called.
    10:28:28.07: Copy estimate before address addition is 1
    10:28:28.07: Parsing address [email protected]
    10:28:28.07: Rewriting: Mbox = "Store.Administrator", host = "s1009.prodapt.com", domain = "$*", literal = "", tag = ""
    10:28:28.07: Rewrite: "$*", position 0, hash table -
    10:28:28.07: Found: "$A$E$F$U%[email protected]"
    10:28:28.07: Match, pattern = "s1009.prodapt.com", current = "(*domaincheck*)"
    10:28:28.07: old state = not checked.
    10:28:28.07: Using result 1 from domain match cache.
    10:28:28.07: new state = succeeded.
    10:28:28.07: New mailbox: "Store.Administrator".
    10:28:28.07: New host: "s1009.prodapt.com".
    10:28:28.07: New route: "s1009.prodapt.com".
    10:28:28.07: New channel system: "s1009.prodapt.com".
    10:28:28.07: Looking up host "s1009.prodapt.com".
    10:28:28.07: - found on channel l
    10:28:28.07: Routelocal flag set; scanning for % and !
    10:28:28.07: Address [email protected] requires local processing.
    10:28:28.07: Variant #1 = [email protected]
    10:28:28.07: Variant #2 = *@s1009.prodapt.com
    10:28:28.07: Variant #3 = Store.Administrator
    10:28:28.07: Checking for [email protected] in the system alias file
    10:28:28.07: - not found
    10:28:28.07: Checking for *@s1009.prodapt.com in the system alias file
    10:28:28.07: - not found
    10:28:28.07: Checking for Store.Administrator in the system alias file
    10:28:28.07: - not found
    10:28:28.07: Checking [email protected] with URL template ldap:///$V?*?sub?$R
    10:28:28.07: LDAP URL template identified
    10:28:28.07: URL determined to be: ldap:///o%3Ds1009.prodapt.com%2Cdc%3Dprodapt%2Cdc%3Dcom?*?sub?(|([email protected])([email protected])([email protected]))
    10:28:28.07: URL context #1 will be used
    10:28:28.07: Using cached LDAP result for URL info: ldap:///$V?*?sub?$R|[email protected]|[email protected]
    10:28:28.07: Scanning LDAP result.
    10:28:28.07: Attribute: objectclass
    10:28:28.07: Attribute index: 0
    10:28:28.07: Attribute: inetuserstatus
    10:28:28.07: Attribute index: 1
    10:28:28.07: Attribute: mailuserstatus
    10:28:28.07: Attribute index: 2
    10:28:28.07: Attribute: uid
    10:28:28.07: Attribute index: 5
    10:28:28.07: Attribute: mailDeliveryOption
    10:28:28.07: Attribute index: 13
    10:28:28.07: Attribute: mail
    10:28:28.07: Attribute index: 16
    10:28:28.07: Attribute: mailhost
    10:28:28.07: Attribute index: 30
    10:28:28.07: Attribute: mailQuota
    10:28:28.08: Attribute index: 31
    10:28:28.08: Attribute: mailMsgQuota
    10:28:28.08: Attribute index: 32
    10:28:28.08: Scanning complete, begin actions
    10:28:28.08: Possible user object classes: inetLocalMailRecipient+inetmailuser
    10:28:28.08: Possible group object classes: inetLocalMailRecipient+inetmailgroup
    10:28:28.08: Object class: top
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: person
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: inetorgperson
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: iplanet-am-managed-person
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: organizationalPerson
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: inetUser
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: ipUser
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: userPresenceProfile
    10:28:28.08: Object class didn't match
    10:28:28.08: Object class: inetMailUser
    10:28:28.08: Object class match, reference value 1
    10:28:28.08: Object class: inetLocalMailRecipient
    10:28:28.08: Object class match, reference value 18
    10:28:28.08: User/group index = 1
    10:28:28.08: Domain is active
    10:28:28.08: Mail domain is active
    10:28:28.08: User status = active
    10:28:28.08: User is active
    10:28:28.08: Mail user status = active
    10:28:28.08: User is active
    10:28:28.08: User UID admin found.
    10:28:28.08: Delivery option: mailbox
    10:28:28.08: Delivery options value: 1
    10:28:28.08: Block limit now: 2147483647
    10:28:28.08: Processing mailhost attribute s1009.prodapt.com
    10:28:28.08: Mailhost references local system
    10:28:28.08: Disk quota information ignored.
    10:28:28.08: Message quota information ignored.
    10:28:28.08: No reprocess flag on user, processing now
    10:28:28.08: Status for this address = 1
    10:28:28.08: - URL match for [email protected]
    10:28:28.08: Delivery option template: $M%$\$2I$_+$2S@ims-ms-daemon
    10:28:28.08: Delivery option result: admin@ims-ms-daemon
    10:28:28.08: - admin@ims-ms-daemon
    10:28:28.08: Parsing address admin@ims-ms-daemon
    10:28:28.08: Rewriting: Mbox = "admin", host = "ims-ms-daemon", domain = "$*", literal = "", tag = ""
    10:28:28.08: Rewrite: "$*", position 0, hash table -
    10:28:28.08: Found: "$A$E$F$U%[email protected]"
    10:28:28.08: Match, pattern = "ims-ms-daemon", current = "(*domaincheck*)"
    10:28:28.08: old state = not checked.
    10:28:28.08: Using result 0 from domain match cache.
    10:28:28.08: new state = fail pending.
    10:28:28.08: Rewrite failed due to prechannel mismatch.
    10:28:28.08: Rewrite: "$*", position 1, hash table -
    10:28:28.08: Failed.
    10:28:28.08: Rewrite: "$*", position 0, rewrite database -
    10:28:28.08: Failed
    10:28:28.08: Rewriting: Mbox = "admin", host = "ims-ms-daemon", domain = "ims-ms-daemon", literal = "", tag = ""
    10:28:28.08: Rewrite: "ims-ms-daemon", position 0, hash table -
    10:28:28.08: Failed.
    10:28:28.08: Rewrite: "ims-ms-daemon", position 0, rewrite database -
    10:28:28.08: Failed
    10:28:28.08: Looking up host "ims-ms-daemon".
    10:28:28.08: - found on channel ims-ms
    10:28:28.08: - orig_send_access mapping check: l|[email protected]|l|[email protected]
    10:28:28.08: - passed.
    10:28:28.08: - send_access mapping check: l|[email protected]|ims-ms|admin@ims-ms-daemon
    10:28:28.08: - passed.
    10:28:28.08: - adding address admin@ims-ms-daemon to channel ims-ms
    10:28:28.08: - adding address [email protected] to headers.
    10:28:28.08: Copy estimate after address addition is 2
    Expanded address:
    [email protected]
    Submitted address list:
    ims-ms
    admin@ims-ms-daemon (orig [email protected], inter [email protected], host ims-ms-daemon) NOTIFY-FAILURES NOTIFY-DELAYS
    Submitted notifications list:
    root@s1009 #

  • User unable to delete calendar event "unknown error"

    User is running Outlook 2013 home business, and she has a calendar entry that is linked to another mailbox .
    When I browse this mailbox from OWA or Outlook client i cannot see this calendar entry. 
    When the user tried to delete the entry, they receive warning "unknown error" .
    It appears the calendar entry is somehow linked to her Outlook profile.
    How can i reset this entry without recreating her profile?
    Regards

    Hi
    It is a recurring appointment. When you  double click on the appointment it states "This is on appointment in a series. What do you want to open?" Click The entire series , and it opens the appointment in READ ONLY mode. When you click Delete
    , it throws unknown error.
    i have tried the following commands;
    Outlook /cleansharing
    outlook /cleanreminders 
     outlook
    /cleandmrecords 
     outlook
    /cleanfreebusy 
     outlook
    /cleanprofile 
    none of which have removed this entry.
    I have even tried creating another profile for the user, and this reoccurring appointment is still visible.
    The appointment isn't visible on the mailbox where it was created nor is it visible when viewing both mailboxes on OWA.
     here is a screen shot showing the issue.

  • I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred.  Try saving to disk first and then opening the file".

    I get the following error everytime I download something from the internet:-"/Users/vinaypunjabi/Downloads/Ontario Colleges Chart(2)(1).pdf could not be opened, because an unknown error occurred.  Try saving to disk first and then opening the file".
    Then it shows as downloading failed.But if I click on it twice ,it opens up .
    this has started happening since last week.Before this ,it never happened.
    Please suggest what has gone wrong somewhere and how can I rectify it.

    Please install the following add-on to see if it helps.
    https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

  • Trying to add a new user, but gives unknown error

    Hi Guys,
    When I go to site actions >> site setting >> site permissions >> and try to add a new user, it gives me "unknown error". Any ideas why this is happening? This is happening only on some of the sites. Thank you.

    check uls logs and event viewer
    try these links:
    http://www.go4sharepoint.com/Forum/get-unknown-error-adding-users-10654.aspx
    http://roxority.com/sharepoint-zen/sharepoint-unknown-error-how-to-show-all-the-details.html
    https://social.msdn.microsoft.com/Forums/office/en-US/69806e64-fc2c-4d74-8ec3-98f5d5e5f5ff/cannot-add-user-to-sharepoint-group-unknown-error?forum=sharepointdevelopmentlegacy
    https://support.microsoft.com/kb/926961?wa=wsignin1.0
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • Unknown User Type Error using Add-AzureAccount

    Using the following code in an Azure automation runbook from the Portal (attempting to start a VM):
    workflow VMStart
    $Cred = Get-AutomationPSCredential –Name automationuser
    Add-AzureAccount -Credential $Cred
    Select-AzureSubscription -SubscriptionName "MySubscription"
    Start-AzureVM -ServiceName "MyServiceName" -Name "MyVirtualMachine" -force
    I get the following errors in the Output Pane:
    1/15/2015 4:53:09 PM, Error: Add-AzureAccount : unknown_user_type: Unknown User Type
    At VMStart:7 char:7
    +
    + CategoryInfo : CloseError: (:) [Add-AzureAccount], AadAuthenticationFailedException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.AddAzureAccount
    1/15/2015 4:53:10 PM, Error: Select-AzureSubscription : The subscription named 'MySubscription' cannot be found. Use Set-AzureSubscription to
    initialize the subscription data.
    Parameter name: name
    At VMStart:9 char:9
    +
    + CategoryInfo : CloseError: (:) [Select-AzureSubscription], ArgumentException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.SelectAzureSubscriptionCommand
    1/15/2015 4:53:10 PM, Error: Start-AzureVM : A parameter cannot be found that matches parameter name 'force'.
    At VMStart:11 char:11
    +
    + CategoryInfo : InvalidArgument: (:) [Start-AzureVM], ParameterBindingException
    + FullyQualifiedErrorId :
    NamedParameterNotFound,Microsoft.WindowsAzure.Commands.ServiceManagement.IaaS.StartAzureVMCommand
    I can't find any information on the "Unknown User Type" error.
    Any ideas?
    Thanks,
    Scott

    Hi Joe -
    I attempted to install the Azure Powershell using the instructions here:
    http://azure.microsoft.com/en-us/documentation/articles/install-configure-powershell/
    Upon completion I was unable to find Azure Powershell from Start/Programs:
    I then attempted to re-install Azure Powershell.  Initially, it came up with the error: "There was an error loading custom feed: 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml'. Error: 'ProductId PHP not found.'."
    I clicked OK and WPI indicated that the Azure Powershell would be installed.  I clicked INSTALL and WPI showed Azure Powershell in the list, but the Total File Download size was 0MB.  I clicked I ACCEPT and it immediately blinked back that Azure
    Powershell was installed.
    When I clicked FINISH, however, the following was displayed:
    Here is the the log file from the latest attempt:
    DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9842185
    DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9842185 responded with 302
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 302 Found
    Cache-Control: private
    Content-Length: 175
    Content-Type: text/html; charset=utf-8
    Expires: Fri, 16 Jan 2015 17:18:12 GMT
    Location: https://www.microsoft.com/web/webpi/5.0/webproductlist.xml
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 2.0.50727
    X-Powered-By: ASP.NET
    Date: Fri, 16 Jan 2015 17:19:11 GMT
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 15 Jan 2015 19:17:09 GMT
    ETag: "246ac1dbf730d01:0"
    Cache-Control: max-age=280
    Date: Fri, 16 Jan 2015 17:19:12 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\1343597488.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Fri, 17 Oct 2014 12:44:38 GMT
    ETag: "97c9cd1c8eacf1:0"
    Cache-Control: max-age=296
    Date: Fri, 16 Jan 2015 17:19:14 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-97141593.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-97141593.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 08 May 2014 18:42:31 GMT
    ETag: "26a51545ed6acf1:0"
    Cache-Control: max-age=372
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-230948881.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-230948881.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Tue, 21 Oct 2014 20:26:36 GMT
    ETag: "247eed4f6dedcf1:0"
    Cache-Control: max-age=278
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1135381691.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1135381691.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 08 May 2014 18:42:32 GMT
    ETag: "8285645ed6acf1:0"
    Cache-Control: max-age=60
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1877981721.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1877981721.xml'
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://go.microsoft.com/?linkid=9842185' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\1343597488.xml'
    DownloadManager Information: 0 : Loading product xml from: http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
    DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
    DownloadManager Error: 0 : Error loading downloaded product file: 'System.InvalidOperationException: ProductId PHP not found.
    at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)'
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
    DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
    DownloadManager Error: 0 : Error loading feed http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml: System.InvalidOperationException: ProductId PHP not found.
    at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadExternalFile(Uri uri)
    at Microsoft.Web.PlatformInstaller.ProductServiceImpl.LoadProducts(String primaryFeed, String[] feeds)
    DownloadManager Information: 0 : Getting ratings file from http://go.microsoft.com/?linkid=9752395
    DownloadManager Information: 0 : Contextual entry products: WindowsAzurePowerShell
    DownloadManager Information: 0 : Adding product Microsoft Azure PowerShell with Microsoft Azure SDK (WindowsAzurePowershell) to cart
    DownloadManager Information: 0 : Contextual navigation to product 'WindowsAzurePowershell'
    DownloadManager Information: 0 : http://go.microsoft.com/?linkid=9752395 responded with 302
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 302 Found
    Cache-Control: private
    Content-Length: 203
    Content-Type: text/html; charset=utf-8
    Expires: Fri, 16 Jan 2015 17:18:17 GMT
    Location: http://www.microsoft.com/web/handlers/WebPI.ashx?command=getatomfeedwithavgratingquery
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 2.0.50727
    X-Powered-By: ASP.NET
    Date: Fri, 16 Jan 2015 17:19:16 GMT
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '22570'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '75392'
    DownloadManager Warning: 0 : Error getting last-modified header, error code: 12150
    DownloadManager Warning: 0 : HttpQueryInfoWithRetry for HTTP_QUERY_LAST_MODIFIED failed.
    DownloadManager Information: 0 : Ratings file loaded successfully
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Adding product 'WindowsAzurePowershell'
    DownloadManager Information: 0 : Setting current install to 1
    DownloadManager Information: 0 : Starting install sequence
    DownloadManager Information: 0 : Starting EXE command for product 'Microsoft Azure PowerShell with Microsoft Azure SDK'. Commandline is: 'C:\Windows\system32\cmd.exe /C echo noop'. Process Id: 5308
    DownloadManager Information: 0 : Install exit code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is '0'
    DownloadManager Information: 0 : Install return code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is Success
    DownloadManager Information: 0 : Product Microsoft Azure PowerShell with Microsoft Azure SDK done install completed
    DownloadManager Information: 0 : Increasing current install to 2
    DownloadManager Information: 0 : Product: WindowsAzurePowershell, Install Status: InstallCompleted-Success, Install Time: 00:00:00.0560000
    DownloadManager Information: 0 : Clearing cart
    I did attempt to open the regular Powershell and use the command Get-AzureVM, but the following error was returned:
    The term 'Get-AzureVM' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
    spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:12
    + Get-AzureVM <<<<
    + CategoryInfo : ObjectNotFound: (Get-AzureVM:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
    Any advice appreciated...
    Thanks,
    Scott

  • In App Purchase An unknown error has occurred with test user account

    I have created a test app that has in app purchasing. I am able to connect to the store and verify my product ID's. I then use my test user account to purchase a product. And guess what... it works... the first time. If I try to use the test user account to buy another product (the same product or a different one) then I get a pop up that says
    "An unknown error has occurred"
    with a "Cancel" and "Retry" option. If I retry then I get the same error. After hitting cancel I get the error:
    Error Domain=SKErrorDomain Code=0 UserInfo=0x161180 "Cannot connect to iTunes Store"
    Any ideas?

    I am having the same problem with my test account on multiple versions of iPhones. Any idea? Would this error affect real users?

  • Manage Users --Cannot Save, getting error "The resource could not be saved.... unknown error"

    In Project Server 2010, in Server Settings > Manage Users we can't edit any existing users - no matter if we change something or not, as soon as we hit
    the SAVE-Button, we get this error:
    The resource could not be saved due to the following reasons:
    An unknown error has occurred.
    We have two custom Security Categories and Users Group. The Resources are synced with AD Groups every midnight. There are no Resource level Custom fields.
    We were able to save it till few days, not sure what is the issue now. 
    How to find out and resolve this issue!
    Any hint would be of great help.
    Thanks.
    Greema

    Hi
    Go to IISManager --> Select "SharePoint Web Access" --> Double click on Compression -->
    2] Uncheck both "Enable Dynamic content compression" and "Enable static content compression" --> click on Apply.
    3] Do the same steps for the site where PWA is present. Then try editing the user.

  • Users see "Unknown Error" after reporting results to internal server; server gets results

    I've finally got my internal server reporting working in my Captivate trail (mostly configuration oversights on my end), but now I see "Unknown Error" every time I try to report the results.
    The funny thing is, the server is still getting the results.
    Unfortunately, I can't do a whole lot of testing at this point because my trail has expired and we haven't been able to purchase yet (happening soon). Here are a few things I plan to test when I can. Any other ideas/input?
    Ensure all buttons are tracked in the quiz (there are no questions in this project).
    Move the results slide to the VERY end (currently, there's one slide after it).
    Decrease the "Passed" percentage for slide views (currently at 100%).
    I've reproduced this in both IE and Chrome. I'm using all Windows machines, and my reporting server is Win2k8, running IIS 7.5. Other than this message, everything else works fine in both browsers.
    Thanks in advance for any additional input.
    Phil

    I've finally got my internal server reporting working in my Captivate trail (mostly configuration oversights on my end), but now I see "Unknown Error" every time I try to report the results.
    The funny thing is, the server is still getting the results.
    Unfortunately, I can't do a whole lot of testing at this point because my trail has expired and we haven't been able to purchase yet (happening soon). Here are a few things I plan to test when I can. Any other ideas/input?
    Ensure all buttons are tracked in the quiz (there are no questions in this project).
    Move the results slide to the VERY end (currently, there's one slide after it).
    Decrease the "Passed" percentage for slide views (currently at 100%).
    I've reproduced this in both IE and Chrome. I'm using all Windows machines, and my reporting server is Win2k8, running IIS 7.5. Other than this message, everything else works fine in both browsers.
    Thanks in advance for any additional input.
    Phil

  • Tried to update my iPad  OS from iTunes. Frozen and got an "unknown error msg". I tried to restore the iPad to factory settings..got the same

    I bought today a new iPad from Rideau Store. The setup guys didn't update to latest software version. I tried to do myself trough iTunes, which notify me that an upgrade is available. After a while the upgrading process froze with a msg "unknown error ..". I clicked on the More  info  button and I got a page saying "due to a scheduled upgrade of Apple's support system some feature are not available.
    The bottom line is that now the iTunes does detect the iPad being in recovering mode and asks to restore it to fabrics defaults. I tried to do this and again I got aqn "unknown error"
    Finally I run the iTunes diagnostics to check the connectivity between my iPad and my HP laptop (iTunes). For unknown reson the iTunes does not detect my iPad. See below the diagnostics log:
    Itunes Diagnostics
    MicrosoftWindows XP Professional Service Pack 3 (Build 2600)
    Hewlett-PackardPavilion dv5000 (EP416UA#ABA)
    iTunes10.2.2.12
    QuickTime 7.6.9
    FairPlay1.11.17
    AppleApplication Support 1.5.1
    iPod UpdaterLibrary 10.0d2
    CD Driver2.2.0.1
    CD Driver DLL2.1.1.1
    Apple MobileDevice 3.4.0.25
    Apple MobileDevice Driver 1.55.0.0
    Bonjour 2.0.5.0(214.3)
    Gracenote SDK1.8.2.457
    GracenoteMusicID 1.8.2.89
    GracenoteSubmit 1.8.2.123
    Gracenote DSP1.8.2.34
    iTunes SerialNumber 0012AD0812DA2D38
    Current user isan administrator.
    The currentlocal date and time is 2011-04-20 20:32:27.
    iTunes is notrunning in safe mode.
    WebKitaccelerated compositing is enabled.
    HDCP is notsupported.
    Core Media issupported.
    Video DisplayInformation
    ATI MOBILITYRADEON Xpress 200 Series  
    **** ExternalPlug-ins Information ****
    No externalplug-ins installed.
    Genius ID:cb0eaa5cad8a753f64335065bc061263
    **** DeviceConnectivity Tests ****
    iPodService10.2.2.12 is currently running.
    iTunesHelper10.2.2.12 is currently running.
    Apple MobileDevice service 3.3.0.0 is currently running.
    UniversalSerial Bus Controllers:
    StandardEnhanced PCI to USB Host Controller. Device is working properly.
    StandardOpenHCD USB Host Controller.  Device isworking properly.
    StandardOpenHCD USB Host Controller.  Device isworking properly.
    No FireWire(IEEE 1394) Host Controller found.
    Most RecentDevices Not Currently Connected:
    iPad runningfirmware version 4.3.1
    Serial Number:        DLXFK2A8DKPH
    **** DeviceSync Tests ****
    No iPod, iPhone, or iPad found.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • Adobe Media Encoder Unknown Error

    I'm trying to export an Adobe Premier Pro file on Adobe Media Encoder. Each time I try, it gets about halfway through, then this error message comes up:
    - Source File: /Users/A25/Library/Caches/TemporaryItems/Incubus Trailer Rough Cut.prproj
    - Output File: /Users/A25/Desktop/Odyne Theatrical Trailer.mp4
    - Preset Used: HDTV 1080p 25 High Quality
    - Video: PAL, 1920x1080, 25 [fps], Progressive
    - Audio: AAC, 160 [kbps], 48 kHz, Stereo
    - Bitrate: VBR, 1 Pass, Target 32.00, Max 40.00 [Mbps]
    - Encoding Time: 00:07:07
    Mon Apr 15 12:48:21 2013 : Encoding Failed
    Error compiling movie.
    Unknown error.
    I've tried different video presets (1440x1080, 1920x1080 etc), but this message has appeard every time. Any ideas how to export it?
    Thanks

    Please read here:
    "Error compiling movie" when rendering or exporting with Premiere Pro CS3, CS4, CS5, CS5.5, CS6
    and here:
    Adobe Forums: FAQ: What information should I provide when asking a question on this forum?
    Jeff

  • "Unknown Error" all the time, every time on render of project, any codec

    Trying to render a feature length documentary for a film festival (ie.. I don't have time for this). The project timeline runs 1 hour and 20 minutes. If I try and export or queue the timeline in media encoder to h.264, QuickTime or Select "Match Sequence Settings" as my output format, the media encoder fails to render with the very informative "UNKNOW ERROR" every time at random point in the render procedure. When rendering it as an mpeg once, I am able to see one place where it crashed. It is a place in the timeline where the are no transition, not cuts, no overlays, absolutely nothing out of the ordinary. Yet, it crashed there this time. Next time, it will crash elsewhere.
    I am trying to render the timeline on segment at a time. So far, each smaller segment of 20 minute blocks seems to be rending just fine and goes past the points where other renders failed. Looks like Media Encoder can't handle large projects.
    Here's all the requested information for a complete diagnosis of the problem.
    Error given to me by Media Encoder : "Unknown Error" --that's it. The time rendered varies between 43 minutes and 3 hours.
    - Encoding Time: 00:54:04
    05/03/2015 05:59:03 PM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    Adobe Premiere Pro CC 8.1 Caravan
    2014.2 Release
    8.2.0 (65) Build
    OS X 10.10.3 (14D136)
    iMac (27-inch, Mid 2011)
    3.4 GHz Intel Core i7
    24 GB 1333 MHz DDR3
    AMD Radeon HD 6970M 2048 MB
    I'm right handed, my favorite color is blue, the computer is on the Eastern TimeZone
    I need this timeline rendered and I'm not interested becoming a forensic-level technical authority on Premiere to get it. This problem has come and gone now for months and is intolerable. I pay for software and I expect it to work, and at least give me something more useful than "UNKNOW ERROR." There is no such thing. As a former developer, I can say with authority that simply dumping to a message that says this is lazy and sloppy programming. Buffer underruns, stack overflows..whatever. Everything is caused by something. I can't begin to diagnose this problem unless Adobe provides software error handing that gives me some idea of what happens. Where did it happen in the timeline? What routine/subroutine gave the error? Was it a codec error? Come on....these things are not unknowable.
    Adobe, PLEASE stop coming out with new features when you can't make your existing pay by the month software reliable! Maybe FCPX is worth another look.

    UPDATE:
    tried rending the entire project as Quicktime ProRes 422 (since that is what clips were recorded in originally anyway) and Media Encoder gto 89% complete....and the entire application CRASHED. WHO-HOO! Way to go, Adobe!!!!!
    Here's part of the crash report if it means anything. Maybe I'll try it again and see if anything changes! Can't get any worse.
    Process:               Adobe Media Encoder CC 2014 [864]
    Path:                  /Applications/Adobe Media Encoder CC 2014/Adobe Media Encoder CC 2014.app/Contents/MacOS/Adobe Media Encoder CC 2014
    Identifier:            com.adobe.dynamiclinkmanager.application
    Version:               8.2.0.54 (8.2.0)
    Code Type:             X86-64 (Native)
    Parent Process:        dynamiclinkmanager [826]
    Responsible:           dynamiclinkmanager [826]
    User ID:               502
    Date/Time:             2015-05-03 20:05:05.829 -0400
    OS Version:            Mac OS X 10.10.3 (14D136)
    Report Version:        11
    Anonymous UUID:        5CCC287C-7B70-E4F9-D0E8-4180FB0681CC
    Sleep/Wake UUID:       0ED73954-6C5A-4CCE-B807-974B71171E95
    Time Awake Since Boot: 33000 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_CRASH (SIGBUS)
    Exception Codes:       0x0000000000000000, 0x0000000000000000
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib         0x00007fff94c8d4de mach_msg_trap + 10
    1   libsystem_kernel.dylib         0x00007fff94c8c64f mach_msg + 55
    2   com.apple.CoreFoundation       0x00007fff94955eb4 __CFRunLoopServiceMachPort + 212
    3   com.apple.CoreFoundation       0x00007fff9495537b __CFRunLoopRun + 1371
    4   com.apple.CoreFoundation       0x00007fff94954bd8 CFRunLoopRunSpecific + 296
    5   com.apple.HIToolbox           0x00007fff8ab7256f RunCurrentEventLoopInMode + 235
    6   com.apple.HIToolbox           0x00007fff8ab722ea ReceiveNextEventCommon + 431
    7   com.apple.HIToolbox           0x00007fff8ab7212b _BlockUntilNextEventMatchingListInModeWithFilter + 71
    8   com.apple.AppKit               0x00007fff8c8fe9bb _DPSNextEvent + 978
    9   com.apple.AppKit               0x00007fff8c8fdf68 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 346
    10  com.apple.AppKit               0x00007fff8c8f3bf3 -[NSApplication run] + 594
    11  com.adobe.exo.framework       0x00000001057f3a88 exo::app::OS_AppBase::RunEventLoop() + 56
    12  com.adobe.ame.application     0x00000001000195c1 AME::RunTheApp(exo::app::AppInitArgs&, std::vector<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >, std::allocator<std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > > >&) + 11809
    13  com.adobe.ame.application     0x0000000100049ba8 main + 440
    14  com.adobe.ame.application     0x0000000100003e34 start + 52

  • I downloaded an album from iTunes and some of the songs downloaded but others didn't there was an error message 8003 Unknown error occurred. While I downloaded the album to my phone, it wouldn't download to my mac, what am I doing wrong???

    I purchased an album on ITunes store, while the items downloaded to my phone, it didn't download to my mac. Some of the songs downloaded but not the majority, when I try to download the songs, it gives me an error 8003 Unknown error occured. What am I doing wrong? If I can't download this album, how do I get a credit??

    Hello mercdw,
    Once the music has been downloaded to your iPhone, you can transfer purchases from your device to iTunes.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Alternatively, the following article provides further information regarding this error and steps that can help resolve the issue.
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Allen

Maybe you are looking for

  • Automatic creation of meter reading order with RR 01 after move in

    Hi Experts, I am working with DM module of SAP ISU. Currently I am facing a problem that after move-in a periodic order with RR 01 is created automatically by the system. Ex: Move in date is 01.01.2010. Monthly Portion is used with Schedule record 01

  • JAVA Add-in For Central ABAP Instance installation failure

    Hi!  I'm attempting to install a java add-in to an ABAP central instance in our sandbox for NW04 SR1.  After sapinst is started, the process runs for approximately 2 minutes then fails. I've not been successful in determining exactly why.  I have env

  • Microsoft word does not exist. Please installe Microsoft Word 2000 or later

    Hi, I am running RoboHelp X3 and recently upgraded to Windows XP running Word 2003 and now cannot generate printed documentatation because of problems with Word. Despite changing the registry as suggested in another forum post (which I think was actu

  • Query on publishing backend ES into PI SR

    Hi All,           I am referring to the following link to publish SAP ERP tp Service Registry in PI. http://help.sap.com/saphelp_nwpi711/helpdata/en/25/683fbe7e01407cb20995d10d71c895/content.htm In From the SOA Manager main screen, go to the Applicat

  • Currency LOV in Element Form

    Hi , I need to update the LOV of Currency in Element Form but i have not idea where the Curreny LOV is defined in Oracle HRMS which is displayed in Element Form. Any help will be highly appreciated! Thanks, Gaurav