SG 300-10 - How do I change static IP?

How can I edit a static interface IP address?
I don't seem to be able to edit the static IP address for my switch. How do I go about changing it? As you can see the IP Address field is not editable.
I have also upgrade to the latest firmware and I cannot figure out how to edit it via that as well.
Thanks!

I had the same issue when using the console. I was able to reset the IP by doing the following.
The following assumes that that you have an existing static IP already set on vlan 1.
Console(Serial cable) in to the switch that your trying to change
conf t
int vlan 1
no ip address
ip address dhcp
...wait for ip from dhcp, you see the IP address come in with the LOG updates... 02-May-2013 15:41:54 %BOOTP_DHCP_CL-I-DHCPCONFIGURED: The device has been configured on interface Vlan 1 , IP 10.1.32.20, mask 255.255.255.0, DHCP server 10.1.32.100
...Once the new IP has been received then...
ip address A.B.C.D NET.WOR.KMA.SKK
...verify that the change has worked...
end
copy run start
To avoid having to connect via serial you could check your DHCP server to see what IP your switch has picked up and then log back in to set the new static IP. This would require knowing the MAC address of your switch.

Similar Messages

How do i change export dpi to 300 in Lightroom?

I find when exporting tiffs or editing images in external editor from lightroom files are always at 240dpi but i want to use 300 dpi, how do i change this?

First of all, why is it relevant?
Second, for exporting, it's in the export dialog. For editing, it's in the preferences.

How do I reset to default or change static IP address on HP Officejet Pro 8600 Premium printer?

How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?

Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi

How do i change the java coffee icon??

Does anyone know how to do this. I have tried the following but it did not work:
public question()
          super("<-- How can i change this Icon");
          displayArea = new JTextArea();
          getContentPane().add(new JScrollPane(displayArea), BorderLayout.CENTER);
          setSize(400,300);
          setVisible(true);
          ImageIcon icon = new ImageIcon("C:/java/icon.jpg");
          setIconImage(icon);
          }//end question
public static void main(String args[])
            question application = new question();
            application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            application.print();
       }Thanks!!!

Cross Posted
http://forum.java.sun.com/thread.jspa?threadID=575582&messageID=2873916#2873916

How can I change the red color of the news theme?

I would prefer to use a different color for the news theme in iMovie. Red doesn't look good with my pics. How can I change it from red to another color? Is that possible?

try this
import javax.swing.*;
import java.awt.*;
class Testing extends JFrame
public Testing()
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    setSize(250,75);
    setLocation(400,300);
    JPanel jp = new JPanel();
    JToggleButton jtb = new JToggleButton("Toggle me");
    jtb.setUI(new MyUI());
    jp.add(jtb);
    getContentPane().add(jp);
public static void main(String args[]){new Testing().setVisible(true);}
class MyUI extends javax.swing.plaf.metal.MetalToggleButtonUI
public Color getSelectColor(){return Color.BLACK;}
}

Wrong Apple ID: How do I change the Apple ID prompt when Updating All Apps?

How can I change the (wrong) Apple ID from the password prompting dialogue when I am already signed in Apple Store with my own ID?
More details of my problem:
When I try the Apps' Update-All option in my iPod 4, the password dialogue prompts me with my girlfriend's Apple ID; YET, I AM signed in the Apple Store with MY own Apple ID.
I have already verified my ID under Settings/Store. I have also signed out, signing back in with my Apple ID, just in case. No problems there, for I DO sign in with my own ID ok. The problem is just the prompt dialogue for password, when I try to use the 'Update All' feature it prompts me for password with her ID, not mine.
If I go back to Apps and choose the Categories (or Top25) menu, at the bottom of the page, it shows me signed in (my Apple ID). If I try to update one Apps it will do ok. But if I try to Update All it will prompt me for password using her ID, waiting for me to type in HER password. I cannot change the Apple ID on that dialogue (static). If I use my password, it will return the "wrong password" dialogue.
How can I change the prompt for the Update All? What is going on here that I AM signed in but my iPod prompts me with her ID. My iPod is registered under my Apple ID. I have already tried the Hard reset by pressing Home and Power buttons simultaneously, to no avail. I am also using my own network to go Online. I am also with the latest OS in my iPod and my Mac's iTunes.
Thank you!
PS This problem is not occurring in my iPhone 4 (same account) nor my Macs.

Does not work for me. (My iPhone is not jailbroken.)
I downloaded a paid app "Imray Marine Rules and Signals v1.5" in the USA with my original account (Account1) then moved countries and needed to create a new Apple account (Account2). If I get 'Info' for the app, it is registered to Account1.
A new version 1.6 of the Imray app has now been released.
I have set up only Account1 on the iphone (settings - App Store) and both Account1 and Account2 in iTunes on my computer. My iphone always tells me there is 1 app to update. However, when I try to update this app on my iphone, I get asked for the password for Account2, then the download fails as it says I do not have a paid earlier version to update.
When I am logged into my computer iTunes as Account1 and try to update it on the computer iTunes, it says there are no apps to update (although my version of the app is definitely the old version).
When I search for the app in iTune Store, it tells me I have already downloaded version 1.6 of the app and the download button is grayed out.
If I temporarily delete the app from my iTunes then try to re-download, I am asked to purchase it again.
If I log into iTunes as Account2 then try to download it, I am asked to purchase it.
Any ideas? I feel I have tried every option and no success.

How do I change the IP address of my PC connected to a EA3500 router ?

I have a PC with Windows 7 connected wirelessly to a EA3500 router. How do I change the IP address on my PC ?

What type of ip address were you talking about? Is it the private ip address that the computer gets from a DHCP server/router or the public ip address that the computer gets from your ISP? If you were talking about the private ip address (e.g. 192.168.1.1) then you can easily assign a static ip address to your computer itself. If you were talking about the public ip address then you don’t need to worry of changing the ip address it’s because the ip address will change from time to time.

We had one family apple id. I want to keep all devices on the same apple id for itunes but separate ones for everything else. How do I change the others now. We have 3 iphones and an ipad.

We had one family apple id. I want to keep all devices on the same apple id for itunes but separate for everything else on the cloud. How can I change the other apple ids now? We have 3 iphones and an ipad.

Hi, thank you for this post. I hope you might be able to help me too?
I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas. New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally. I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
cloud, contacts, facetime, email - this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you or other potential advisers in advance.

How can I change the name of item in TableViewController iOS

How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
    [super viewDidLoad];
     This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
    self.tableView.allowsMultipleSelectionDuringEditing = YES;
    // populate the data array with some example objects
    self.dataArray = [NSMutableArray new];
    NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
    for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
        NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
        [self.dataArray addObject:itemName];
    // make our view consistent
    [self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
    return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Update the delete button's title based on how many items are selected.
    [self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
    // Configure a cell to show the corresponding string from the array.
    static NSString *kCellID = @"cellID";
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
    cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
    return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
    [self.tableView setEditing:YES animated:YES];
    [self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
    [self.tableView setEditing:NO animated:YES];
    [self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
    // The user tapped one of the OK/Cancel buttons.
    if (buttonIndex == 0)
        // Delete what the user selected.
        NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
        BOOL deleteSpecificRows = selectedRows.count > 0;
        if (deleteSpecificRows)
            // Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
            NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
            for (NSIndexPath *selectionIndex in selectedRows)
                [indicesOfItemsToDelete addIndex:selectionIndex.row];
            // Delete the objects from our data model.
            [self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
            // Tell the tableView that we deleted the objects
            [self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
        else
            // Delete everything, delete the objects from our data model.
            [self.dataArray removeAllObjects];
            // Tell the tableView that we deleted the objects.
            // Because we are deleting all the rows, just reload the current table section
            [self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
        // Exit editing mode after the deletion.
        [self.tableView setEditing:NO animated:YES];
        [self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
    // Open a dialog with just an OK button.
    NSString *actionTitle;
    if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
        actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
    else
        actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
    NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
    NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
    UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
                                                             delegate:self
                                                    cancelButtonTitle:cancelTitle
                                               destructiveButtonTitle:okTitle
                                                    otherButtonTitles:nil];
    actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
    // Show from our table view (pops up in the middle of the table).
    [actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
    [self.dataArray addObject:@"New Movie"];
    // Tell the tableView about the item that was added.
    NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
    [self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
                          withRowAnimation:UITableViewRowAnimationAutomatic];
    // Tell the tableView we have finished adding or removing items.
    [self.tableView endUpdates];
    // Scroll the tableView so the new item is visible
    [self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
                          atScrollPosition:UITableViewScrollPositionBottom
                                  animated:YES];
    // Update the buttons if we need to.
    [self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
    if (self.tableView.editing)
        // Show the option to cancel the edit.
        self.navigationItem.rightBarButtonItem = self.cancelButton;
        [self updateDeleteButtonTitle];
        // Show the delete button.
        self.navigationItem.leftBarButtonItem = self.deleteButton;
    else
        // Not in editing mode.
        self.navigationItem.leftBarButtonItem = self.addButton;
        // Show the edit button, but disable the edit button if there's nothing to edit.
        if (self.dataArray.count > 0)
            self.editButton.enabled = YES;
        else
            self.editButton.enabled = NO;
        self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
    // Update the delete button's title, based on how many items are selected
    NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
    BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
    BOOL noItemsAreSelected = selectedRows.count == 0;
    if (allItemsAreSelected || noItemsAreSelected)
        self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
    else
        NSString *titleFormatString =
        NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
        self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@end

Hey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G.

How Do I Change the Padding in Table Cells

Hi, I am trying to set up a table that will allow text to fill the entire cell. I know that if I double click an individual cell, the left and right boundaries of the cell will be displayed on the ruler. However, I can't select multiple cells (even in a column) to adjust the boundaries. By default, all cells are created with no padding on the left, but half an inch on the right. I want no padding on the right as well. I know I can change the the tab for the table with the text inspector, after the fact.
So, #1. How can I change the default right cell wrap for all cells in a table?
Additionally, I know how to get rid of the padding above the text (via text property "instant margins"), but I also need to eliminate the padding at the bottom of the text. When I adjust the instant margin, it just moves the text the upper-left corner of the cell, but does not change the vertical size of the cell. I can change the individual row height by grabbing the border and dragging it up, but, again, this is a pain for large table. I know I can also change the overall cell height by dragging the lower table boundary.
#2. How do I change the default cell height so the cell is tight against the text, regardless of the font size, for all cells in a table?
Any help or suggestion will be greatly appreciated.
Thanks
Gary

Thanks for the reply.
Unfortunately, those options will not do what I need.
If I turn off "Wrap text", the text overflows the cell and the text in the adjacent cell to the right will hidden. I still want the text to wrap, just not half an inch from the right border.
And the "Resize to fit" changes the cell width, which I want to keep the cell at a static width.
One workaround I found, was to modify the table as needed, using text properties, and then save the table as the table default. Unfortunately, that overwrites the factory default, and new table's tabs in other templates (all other properties seem to be retained)
The second option that seems to work, is to save my entire document as a template. That seems to hold all the properties for graphics, tables, etc.
A bit kludgy, but those methods seem to do the trick.
Now, how do I get the default table properties back?
Gary

HT1349 how can I change an email for authorization, the email address we used years back, is no longer a valid email address

how can I change an email for authorization, the email address we used years back, is no longer a valid email address

SfromW wrote: ... how can I change an email for authorization, the email address we used years back, is no longer a valid email address
How to change account here: http://support.apple.com/kb/PH1641
If you need more help, start here: http://www.apple.com/support/itunes/
SfromW wrote: ... we can't remember the password from the old email address (for authorization)...
Help Retrieving and changing passwords here: http://support.apple.com/kb/HT1911
If you need more help, from iTunes for Windows, click iTunes > iTunes Store > Support
SfromW wrote: ... apple should make it easier to transfer authorization authority....I would think anyways.
You might want to rethink your thoughts about making transferring authority easier. Making it too easy would certainly degrade your account's security. If you still believe it should be easier, you can send feedback directly to Apple via http://www.apple.com/feedback/itunesapp.html
You will not get a response, but you can be certain that the responsible Apple people will see your input for consideration in FaceTime product development.
As a new user, please understand that you are NOT directly addressing Apple here. For more info about Apple discussions, start here: http://discussions.apple.com/static/apple/tutorial/etiquette.html
Message was edited by: EZ Jim
Mac OSX 10.7.4

HT1320 how do i change my old ipod for a new one but keep my music on i tunes and not have to reload it

how do i change my old ipod for a new one but keep my music on i tunes and not have to reload it

Ok me again I once changed one ipod classic for another ipod classic on the same laptop , all my music on iTunes (300 CDs) where still there but could not be found by iTunes to load on to the new ipod , I had to load every CD again to solve , should I have reset the first ipod or something?

How do I change the font size of a document when I PRINT?

How to I change the font size of a document when I print it?

To specifically and fully answer your question, no, you absolutely cannot change the “font size” as a function of print.
First of all, there isn't a single “font size” associated with a PDF file (and we assume you are referring to a PDF file since this is an Acrobat forum).
Secondly, PDF is a final form file format meaning that the content is static in terms of location, size, etc. on the page. To change the point size of any particular text, you really need to go back to the source document and make the changes there.
- Dov

How can I change my JApplet into a JApplication?

I am working with a JApplet and am finding that some of my code only works in applications.
So being new to this, I am clueless as to how to change my Applet into an Application. I understand the difference in definition between the two, but when it comes to looking at Applet Code and Application Code, I am not able to see a difference. (Other than an Applet stating "Applet")
So, that being said how can I change my code so that it runs as an application and not an applet? Here is my current layout code
import java.applet.Applet;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
import java.text.NumberFormat;
import java.text.DecimalFormat;
// Creating the main class
public class test extends JApplet implements ActionListener
     // Defining of format information
     JLabel heading = new JLabel("McBride Financial Services Mortgage Calculator");
     Font newFontOne = new Font("TimesRoman", Font.BOLD, 20);
     Font newFontTwo = new Font("TimesRoman", Font.ITALIC, 16);
     Font newFontThree = new Font("TimesRoman", Font.BOLD, 16);
     Font newFontFour = new Font("TimesRoman", Font.BOLD, 14);
     JButton calculate = new JButton("Calculate");
     JButton exitButton = new JButton("Quit");
     JButton clearButton = new JButton("Clear");
     JLabel instructions = new JLabel("Please Enter the Principal Amount Below");
     JLabel instructions2 = new JLabel("and Select a Loan Type from the Menu");
     // Declaration of variables
     private double principalAmount;
     private JLabel principalLabel = new JLabel("Principal Amount");
     private NumberFormat principalFormat;
     private JTextField enterPrincipal = new JTextField(10);
     private double finalPayment;
     private JLabel monthlyPaymentLabel = new JLabel(" Monthly Payment    \t         Interest Paid    \t \t            Loan Balance");
     private NumberFormat finalPaymentFormat;
     private JTextField displayMonthlyPayment = new JTextField(10);
     private JTextField displayInterestPaid = new JTextField(10);
     private JTextField displayBalance = new JTextField(10);
     // Creation of the String of arrays for the ComboBox
     String [] list = {"7 Years @ 5.35%", "15 Years @ 5.50%", "30 Years @ 5.75%"};
     JComboBox selections = new JComboBox(list);
     // Creation of the textArea that will display the output
     private TextArea txtArea = new TextArea(5, 10);
     StringBuffer buff = null;
     // Initializing the interface
     public void init()
          // Creation of the panel design and fonts
          JPanel upper = new JPanel(new BorderLayout());
          JPanel middle = new JPanel(new BorderLayout());
          JPanel lower = new JPanel(new BorderLayout());
          JPanel areaOne = new JPanel(new BorderLayout());
          JPanel areaTwo = new JPanel(new BorderLayout());
          JPanel areaThree = new JPanel(new BorderLayout());
          JPanel areaFour = new JPanel(new BorderLayout());
          JPanel areaFive = new JPanel(new BorderLayout());
          JPanel areaSix = new JPanel(new BorderLayout());
          Container con = getContentPane();
          getContentPane().add(upper, BorderLayout.NORTH);
          getContentPane().add(middle, BorderLayout.CENTER);
          getContentPane().add(lower, BorderLayout.SOUTH);
          upper.add(areaOne, BorderLayout.NORTH);
          middle.add(areaTwo, BorderLayout.NORTH);
          middle.add(areaThree, BorderLayout.CENTER);
          middle.add(areaFour, BorderLayout.SOUTH);
          lower.add(areaFive, BorderLayout.NORTH);
          lower.add(areaSix, BorderLayout.SOUTH);
          heading.setFont(newFontOne);
          instructions.setFont(newFontTwo);
          instructions2.setFont(newFontTwo);
          principalLabel.setFont(newFontThree);
          monthlyPaymentLabel.setFont(newFontFour);
          displayInterestPaid.setFont(newFontFour);
          displayBalance.setFont(newFontFour);
          areaOne.add(heading, BorderLayout.NORTH);
          areaOne.add(instructions, BorderLayout.CENTER);
          areaOne.add(instructions2, BorderLayout.SOUTH);
          areaTwo.add(principalLabel, BorderLayout.WEST);
          areaTwo.add(enterPrincipal, BorderLayout.EAST);
          areaThree.add(selections, BorderLayout.NORTH);
          areaFour.add(calculate, BorderLayout.CENTER);
          areaFour.add(exitButton, BorderLayout.EAST);
          areaFour.add(clearButton, BorderLayout.WEST);
          areaFive.add(monthlyPaymentLabel, BorderLayout.CENTER);
          areaSix.add(txtArea, BorderLayout.CENTER);
          // Using the ActionListener to determine when each button is clicked
          calculate.addActionListener(this);
          exitButton.addActionListener(this);
          clearButton.addActionListener(this);
          enterPrincipal.requestFocus();
          selections.addActionListener(this);
     }

baftos wrote:
Here is one of the sites that explains the procedure:
[http://leepoint.net/notes-java/deployment/applications_and_applets/70applets.html].
But maybe you should try to fix the code that does not work as applet?
Which one is it?
>Here is one of the sites that explains the procedure:
[http://leepoint.net/notes-java/deployment/applications_and_applets/70applets.html].
But maybe you should try to fix the code that does not work as applet?
Which one is it?
The code that doesn't work in my applet is the exit button code
else if (source == exitButton)
                    System.exit(1);
               }I also can't get my program to properly validate input. When invalid input is entered and the user presses calculate, an error window should pop up. Unfortunately it isn't. I compile and run my applications/applets through TextPad. So when I try to test the error window by entering in invalid info, the applet itself shows nothing but the command prompt window pops up and lists errors from Java. Anyhow, here is the method I was told to use to fix it.
private static boolean validate(JTextField in)
          String inText = in.getText();
          char[] charInput = inText.toCharArray();
          for(int i = 0; i < charInput.length; i++)
               int asciiVal = (int)charInput;
          if((asciiVal >= 48 && asciiVal <= 57) || asciiVal == 46)
          else
               JOptionPane.showMessageDialog(null, "Invalid Character, Please Use Numeric Values Only");
               return false;
               return true;
     }My Instructor told me to try the following, but I still can't get it to work.String content = textField.getText();
if (content.length() != 0) {
try {          Integer.parseInt(content);
} catch (NumberFormatException nfe) {}

How to use the static lib of berkeleydb in VC6?

I know there is a libdb45s.lib. But when I try to link my project to it, VC6 reports many errors. Even the getting start examples cannot link correctly. The documents coming with berkeley db do not tell me how to link project to the lib, no matter static or dynamic.
Could anyone tell me how to use the static lib libdb45s.lib and how to link it properly?
OS: Windows XP pro SP2
IDE: Virsual C++ 6.0 sp6
BDB: 4.5.20
Here is what I have done to link the libdb45s.lib:
1.Add BDB related diretorys to VC6 link/lib dirs
2.Add #include <db.c> to my .cpp file, I use the C API
3.Change Project Options
Link-> Libs/Objects-> add "libdb45s.lib"
C/C++-> code generation-> Use Run Time Library-> MutiThreaded
Link-> Ignore Library-> MSVCRT
4.Build, here is the output, hope it would be some help:
--------------------Configuration: wordseg - Win32
Release--------------------
Linking...
LINK : warning LNK4049: locally defined symbol
"_fflush" imported
LINK : warning LNK4049: locally defined symbol "__iob"
imported
LINK : warning LNK4049: locally defined symbol
"__errno" imported
LINK : warning LNK4049: locally defined symbol
"_malloc" imported
LINK : warning LNK4049: locally defined symbol
"_realloc" imported
LINK : warning LNK4049: locally defined symbol "_free"
imported
LINK : warning LNK4049: locally defined symbol
"_fclose" imported
LINK : warning LNK4049: locally defined symbol
"_fopen" imported
LINK : warning LNK4049: locally defined symbol
"__pctype" imported
LINK : warning LNK4049: locally defined symbol
"___mb_cur_max" imported
LINK : warning LNK4049: locally defined symbol
"__isctype" imported
LINK : warning LNK4049: locally defined symbol
"_strchr" imported
LINK : warning LNK4049: locally defined symbol
"_printf" imported
LINK : warning LNK4049: locally defined symbol
"_strncmp" imported
LINK : warning LNK4049: locally defined symbol
"_strncpy" imported
LINK : warning LNK4049: locally defined symbol "_atol"
imported
LINK : warning LNK4049: locally defined symbol
"_getenv" imported
LINK : warning LNK4049: locally defined symbol
"__open" imported
LINK : warning LNK4049: locally defined symbol
"__close" imported
LINK : warning LNK4049: locally defined symbol
"_strftime" imported
LINK : warning LNK4049: locally defined symbol
"_memmove" imported
LINK : warning LNK4049: locally defined symbol
"_strtoul" imported
LINK : warning LNK4049: locally defined symbol
"_fwrite" imported
LINK : warning LNK4049: locally defined symbol
"_fgetc" imported
LINK : warning LNK4049: locally defined symbol
"_strtol" imported
libdb45s.lib(db_err.obj) : error LNK2001: unresolved
external symbol __imp__strerror
libdb45s.lib(db_getlong.obj) : error LNK2001:
unresolved external symbol __imp__strerror
libdb45s.lib(qam_verify.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(mp_mvcc.obj) : error LNK2001: unresolved
external symbol __imp___snprintf
libdb45s.lib(repmgr_util.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(env_region.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(log_put.obj) : error LNK2001: unresolved
external symbol __imp___snprintf
libdb45s.lib(qam_files.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(db.obj) : error LNK2001: unresolved
external symbol __imp___snprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved
external symbol __imp___snprintf
libdb45s.lib(db_pr.obj) : error LNK2001: unresolved
external symbol __imp___snprintf
libdb45s.lib(env_failchk.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(env_register.obj) : error LNK2001:
unresolved external symbol __imp___snprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved
external symbol __imp___vsnprintf
libdb45s.lib(log_debug.obj) : error LNK2001:
unresolved external symbol __imp___vsnprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved
external symbol __imp__vfprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved
external symbol __imp__fprintf
libdb45s.lib(db_pr.obj) : error LNK2001: unresolved
external symbol __imp__fprintf
libdb45s.lib(db_getlong.obj) : error LNK2001:
unresolved external symbol __imp__fprintf
libdb45s.lib(os_errno.obj) : error LNK2001: unresolved
external symbol __imp__WSASetLastError@4
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__WSAGetLastError@0
libdb45s.lib(os_errno.obj) : error LNK2001: unresolved
external symbol __imp__WSAGetLastError@0
libdb45s.lib(repmgr_method.obj) : error LNK2001:
unresolved external symbol __imp__WSAGetLastError@0
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSAGetLastError@0
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__WSAGetLastError@0
libdb45s.lib(env_open.obj) : error LNK2001: unresolved
external symbol __imp__strncat
libdb45s.lib(mut_win32.obj) : error LNK2001:
unresolved external symbol __imp___getpid
libdb45s.lib(os_pid.obj) : error LNK2001: unresolved
external symbol __imp___getpid
libdb45s.lib(txn_chkpt.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(env_stat.obj) : error LNK2001: unresolved
external symbol __imp__time
libdb45s.lib(rep_record.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(rep_backup.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(env_recover.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(txn_region.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(log.obj) : error LNK2001: unresolved
external symbol __imp__time
libdb45s.lib(rep_region.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(db_stati.obj) : error LNK2001: unresolved
external symbol __imp__time
libdb45s.lib(rep_util.obj) : error LNK2001: unresolved
external symbol __imp__time
libdb45s.lib(env_region.obj) : error LNK2001:
unresolved external symbol __imp__time
libdb45s.lib(txn.obj) : error LNK2001: unresolved
external symbol __imp__time
libdb45s.lib(db_idspace.obj) : error LNK2001:
unresolved external symbol __imp__qsort
libdb45s.lib(log_archive.obj) : error LNK2001:
unresolved external symbol __imp__qsort
libdb45s.lib(db_join.obj) : error LNK2001: unresolved
external symbol __imp__qsort
libdb45s.lib(mp_mvcc.obj) : error LNK2001: unresolved
external symbol __imp__qsort
libdb45s.lib(db_meta.obj) : error LNK2001: unresolved
external symbol __imp__qsort
libdb45s.lib(lock_list.obj) : error LNK2001:
unresolved external symbol __imp__qsort
libdb45s.lib(mp_sync.obj) : error LNK2001: unresolved
external symbol __imp__qsort
libdb45s.lib(txn_stat.obj) : error LNK2001: unresolved
external symbol __imp__qsort
libdb45s.lib(rep_record.obj) : error LNK2001:
unresolved external symbol __imp__qsort
libdb45s.lib(os_config.obj) : error LNK2001:
unresolved external symbol __imp__wcscmp
libdb45s.lib(env_config.obj) : error LNK2001:
unresolved external symbol __imp__fgets
libdb45s.lib(repmgr_method.obj) : error LNK2001:
unresolved external symbol __imp__gethostname@8
libdb45s.lib(os_open.obj) : error LNK2001: unresolved
external symbol __imp___snwprintf
libdb45s.lib(os_map.obj) : error LNK2001: unresolved
external symbol __imp___snwprintf
libdb45s.lib(os_unlink.obj) : error LNK2001:
unresolved external symbol __imp___snwprintf
libdb45s.lib(os_dir.obj) : error LNK2001: unresolved
external symbol __imp___snwprintf
libdb45s.lib(os_map.obj) : error LNK2001: unresolved
external symbol __imp__wcsrchr
libdb45s.lib(log_archive.obj) : error LNK2001:
unresolved external symbol __imp___getcwd
libdb45s.lib(lock_stat.obj) : error LNK2001:
unresolved external symbol __imp__localtime
libdb45s.lib(qam_files.obj) : error LNK2001:
unresolved external symbol __imp__strrchr
libdb45s.lib(ctime.obj) : error LNK2001: unresolved
external symbol __imp__ctime
libdb45s.lib(os_clock.obj) : error LNK2001: unresolved
external symbol __imp___ftime
libdb45s.lib(os_uid.obj) : error LNK2001: unresolved
external symbol __imp__rand
libdb45s.lib(os_uid.obj) : error LNK2001: unresolved
external symbol __imp__srand
libdb45s.lib(repmgr_msg.obj) : error LNK2001:
unresolved external symbol __imp__ntohs@4
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__ioctlsocket@12
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSACleanup@0
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__WSACleanup@0
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSAStartup@8
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSASend@28
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSARecv@28
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol
__imp__WSAEnumNetworkEvents@12
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol
__imp__WSAWaitForMultipleEvents@20
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_windows.obj) : error LNK2001:
unresolved external symbol __imp__WSACreateEvent@0
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__WSACreateEvent@0
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__WSACloseEvent@4
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__WSACloseEvent@4
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__closesocket@4
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__closesocket@4
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__accept@12
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__connect@12
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__socket@12
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__socket@12
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__htonl@4
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__htonl@4
libdb45s.lib(getaddrinfo.obj) : error LNK2001:
unresolved external symbol __imp__htonl@4
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__ntohl@4
libdb45s.lib(repmgr_sel.obj) : error LNK2001:
unresolved external symbol __imp__send@16
libdb45s.lib(repmgr_util.obj) : error LNK2001:
unresolved external symbol __imp__htons@4
libdb45s.lib(getaddrinfo.obj) : error LNK2001:
unresolved external symbol __imp__htons@4
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__listen@8
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__bind@12
libdb45s.lib(repmgr_net.obj) : error LNK2001:
unresolved external symbol __imp__setsockopt@20
libdb45s.lib(getaddrinfo.obj) : error LNK2001:
unresolved external symbol __imp__gethostbyname@4
libdb45s.lib(getaddrinfo.obj) : error LNK2001:
unresolved external symbol __imp__inet_addr@4
Release/wordseg.exe : fatal error LNK1120: 47
unresolved externals
Error executing link.exe.
wordseg.exe - 100 error(s), 25 warning(s)

After adding MsWSock.Lib, WSock32.Lib, build returns following errors:
(error count reduced from 100 to 71)
--------------------Configuration: wordsegzjp - Win32 Release--------------------
Compiling...
main.cpp
Linking...
LINK : warning LNK4049: locally defined symbol "_fflush" imported
LINK : warning LNK4049: locally defined symbol "__iob" imported
LINK : warning LNK4049: locally defined symbol "_malloc" imported
LINK : warning LNK4049: locally defined symbol "_realloc" imported
LINK : warning LNK4049: locally defined symbol "_free" imported
LINK : warning LNK4049: locally defined symbol "_fclose" imported
LINK : warning LNK4049: locally defined symbol "_fopen" imported
LINK : warning LNK4049: locally defined symbol "__pctype" imported
LINK : warning LNK4049: locally defined symbol "___mb_cur_max" imported
LINK : warning LNK4049: locally defined symbol "__isctype" imported
LINK : warning LNK4049: locally defined symbol "_strchr" imported
LINK : warning LNK4049: locally defined symbol "_printf" imported
LINK : warning LNK4049: locally defined symbol "_strncmp" imported
LINK : warning LNK4049: locally defined symbol "_strncpy" imported
LINK : warning LNK4049: locally defined symbol "_atol" imported
LINK : warning LNK4049: locally defined symbol "_getenv" imported
LINK : warning LNK4049: locally defined symbol "__open" imported
LINK : warning LNK4049: locally defined symbol "__close" imported
LINK : warning LNK4049: locally defined symbol "_strftime" imported
LINK : warning LNK4049: locally defined symbol "_memmove" imported
LINK : warning LNK4049: locally defined symbol "_strtoul" imported
LINK : warning LNK4049: locally defined symbol "_fwrite" imported
LINK : warning LNK4049: locally defined symbol "_fgetc" imported
LINK : warning LNK4049: locally defined symbol "_strtol" imported
libdb45s.lib(db_err.obj) : error LNK2001: unresolved external symbol __imp__strerror
libdb45s.lib(db_getlong.obj) : error LNK2001: unresolved external symbol __imp__strerror
libdb45s.lib(qam_verify.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(mp_mvcc.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(repmgr_util.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(repmgr_net.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(env_region.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(log_put.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(qam_files.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(db.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(db_pr.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(env_failchk.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(env_register.obj) : error LNK2001: unresolved external symbol __imp___snprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved external symbol __imp___vsnprintf
libdb45s.lib(log_debug.obj) : error LNK2001: unresolved external symbol __imp___vsnprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved external symbol __imp__vfprintf
libdb45s.lib(db_err.obj) : error LNK2001: unresolved external symbol __imp__fprintf
libdb45s.lib(db_pr.obj) : error LNK2001: unresolved external symbol __imp__fprintf
libdb45s.lib(db_getlong.obj) : error LNK2001: unresolved external symbol __imp__fprintf
libdb45s.lib(os_errno.obj) : error LNK2001: unresolved external symbol __imp___errno
libdb45s.lib(env_open.obj) : error LNK2001: unresolved external symbol __imp__strncat
libdb45s.lib(mut_win32.obj) : error LNK2001: unresolved external symbol __imp___getpid
libdb45s.lib(os_pid.obj) : error LNK2001: unresolved external symbol __imp___getpid
libdb45s.lib(txn_chkpt.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(env_stat.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(rep_record.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(rep_backup.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(env_recover.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(txn_region.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(log.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(rep_region.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(db_stati.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(rep_util.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(env_region.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(txn.obj) : error LNK2001: unresolved external symbol __imp__time
libdb45s.lib(db_idspace.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(log_archive.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(db_join.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(mp_mvcc.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(db_meta.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(lock_list.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(mp_sync.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(txn_stat.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(rep_record.obj) : error LNK2001: unresolved external symbol __imp__qsort
libdb45s.lib(os_config.obj) : error LNK2001: unresolved external symbol __imp__wcscmp
libdb45s.lib(env_config.obj) : error LNK2001: unresolved external symbol __imp__fgets
libdb45s.lib(os_open.obj) : error LNK2001: unresolved external symbol __imp___snwprintf
libdb45s.lib(os_map.obj) : error LNK2001: unresolved external symbol __imp___snwprintf
libdb45s.lib(os_unlink.obj) : error LNK2001: unresolved external symbol __imp___snwprintf
libdb45s.lib(os_dir.obj) : error LNK2001: unresolved external symbol __imp___snwprintf
libdb45s.lib(os_map.obj) : error LNK2001: unresolved external symbol __imp__wcsrchr
libdb45s.lib(log_archive.obj) : error LNK2001: unresolved external symbol __imp___getcwd
libdb45s.lib(lock_stat.obj) : error LNK2001: unresolved external symbol __imp__localtime
libdb45s.lib(qam_files.obj) : error LNK2001: unresolved external symbol __imp__strrchr
libdb45s.lib(ctime.obj) : error LNK2001: unresolved external symbol __imp__ctime
libdb45s.lib(os_clock.obj) : error LNK2001: unresolved external symbol __imp___ftime
libdb45s.lib(os_uid.obj) : error LNK2001: unresolved external symbol __imp__rand
libdb45s.lib(os_uid.obj) : error LNK2001: unresolved external symbol __imp__srand
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSASend@28
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSARecv@28
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSAEnumNetworkEvents@12
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSAWaitForMultipleEvents@20
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_sel.obj) : error LNK2001: unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_net.obj) : error LNK2001: unresolved external symbol __imp__WSAEventSelect@12
libdb45s.lib(repmgr_windows.obj) : error LNK2001: unresolved external symbol __imp__WSACreateEvent@0
libdb45s.lib(repmgr_sel.obj) : error LNK2001: unresolved external symbol __imp__WSACreateEvent@0
libdb45s.lib(repmgr_sel.obj) : error LNK2001: unresolved external symbol __imp__WSACloseEvent@4
libdb45s.lib(repmgr_net.obj) : error LNK2001: unresolved external symbol __imp__WSACloseEvent@4
Release/wordsegzjp.exe : fatal error LNK1120: 28 unresolved externals
Error executing link.exe.
wordsegzjp.exe - 71 error(s), 24 warning(s)

SG 300-10 - How do I change static IP?

Similar Messages

Maybe you are looking for